IEC 61000-4-3 : 3.2

Current

Current The latest, up-to-date edition.

ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST

Publisher: International Electrotechnical Committee

Published:

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Terms and definitions
4 General
5 Test levels
6 Test equipment
7 Test setup
8 Test procedure
9 Evaluation of test results
10 Test report
Annex A (informative) - Rationale for the choice of
                        modulation for tests related to the
                        protection against RF emissions from
                        digital radio telephones
Annex B (informative) - Field generating antennas
Annex C (informative) - Use of anechoic chambers
Annex D (informative) - Amplifier non-linearity and example
                        for the calibration procedure according
                        to 6.2
Annex E (informative) - Guidance for product committees on
                        the selection of test levels
Annex F (informative) - Selection of test methods
Annex G (informative) - Description of the environment
Annex H (normative) - Alternative illumination method for
                      frequencies above 1 GHz ('independent
                      windows method')
Annex I (informative) - Calibration method for E-field
                        probes
Annex J (informative) - Measurement uncertainty due to
                        test instrumentation

Abstract - (Show below) - (Hide below)

Establishes a common reference for evaluating the immunity of electrical and electronic equipment when subjected to radiated, radio-frequency electromagnetic fields.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 77
Supersedes	IEC 60801-3 : 1ED 84

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
CEI 210-39 V2 : 2010	Identical
NBR IEC 61000-4-3 : 2014	Identical
I.S. EN 61000-4-3:2006	Identical
SAC GB/T 17626.3 : 1998	Identical
NEN EN IEC 61000-4-3 : 2006 AMD 2 2010	Identical
SN EN 61000-4-3 : 2006 + A1 2008	Identical
DIN EN 61000-4-3 : 2011	Identical
SANS 61000-4-3 : 3.01ED 2008(R2010)	Identical
UNE EN 61000-4-3 : 2007	Identical
DS EN 61000-4-3 : 2006 AMD 2 2010	Identical
NEN 11000-4-3 : 1997	Identical
BS EN 61000-4-3 : 2006	Identical
PN EN 61000-4-3 : 2007 AMD 2 2011	Identical
NF EN 61000-4-3 : 2006 AMD 2 2011	Identical
VDE 0847-4-3 : 2011	Identical
AS/NZS IEC 61000.4.3:2013	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

CEI EN 61260-2 : 2017	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
PREN 1643 : DRAFT 2012	VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES
CSA C22.2 No. 80601-2-56 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-56: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CLINICAL THERMOMETERS FOR BODY TEMPERATURE MEASUREMENT
I.S. EN 62343-2:2014	DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
I.S. EN 60335-1:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
09/30213911 DC : 0	BS EN 61000-4-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS IMMUNITY TEST
DIN EN 60580 : 2001	MEDICAL ELECTRICAL EQUIPMENT - DOSE AREA PRODUCT METERS
BS EN 61513 : 2013	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
CAN/CSA-IEC 61000-4-6:15 (R2018)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
I.S. EN 61582:2006	RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
BS EN 60601-2-2 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
BS EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
11/30217192 DC : 0	BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
BS 5724-2.124(1998) : 1998	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
12/30159217 DC : 0	BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
07/30165539 DC : 0
BIS IS/IEC 60947-4-2 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTRACTORS AND MOTOR-STARTERS - SECTION 2: AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
IEC 61800-5-2 REDLINE : 2ED 2016	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
ISO 17593 : 2007	CLINICAL LABORATORY TESTING AND IN VITRO MEDICAL DEVICES - REQUIREMENTS FOR IN VITRO MONITORING SYSTEMS FOR SELF-TESTING OF ORAL ANTICOAGULANT THERAPY
UNE EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 50165 : 1997	ELECTRICAL EQUIPMENT OF NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS
CSA IEC 61000-6-2 : 2008	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
DIN EN ISO 20072 : 2013	AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
BS EN 1434-4 : 2015	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
OIML R 140 : 2007	MEASURING SYSTEMS FOR GASEOUS FUEL
I.S. EN 55020:2007	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 20:2006)
CEI 13-32 : 2000	WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
CEI EN 62282-3-201 : 2014	FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
IEC 62026-7 : 1.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
14/30298051 DC : 0	BS EN 61069-1 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
IEC 60846-1 : 1.0	RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
11/30250199 DC : 0	BS EN 60974-10 - ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
EN 60308 : 2005	HYDRAULIC TURBINES - TESTING OF CONTROL SYSTEMS
BS EN 60947-4-1 : 2010	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
NF EN 60947-5-9 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
I.S. EN 50270:2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
NF EN 60947-3 : 2009 AMD 2 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
BS EN 60870-2-1 : 1996	TELECONTROL EQUIPMENT AND SYSTEMS - OPERATING CONDITIONS - PART 2-1: POWER SUPPLY AND ELECTROMAGNETIC COMPATIBILITY
NF EN 61098 : 2008	RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
NF EN 50557 : 2012	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
BS EN 61869-6 : 2016	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
11/30245877 DC : 0	BS EN 62387 - RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR PERSONAL AND ENVIRONMENTAL MONITORING
BS IEC 60092-504 : 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
12/30266709 DC : 0	BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
DIN EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
BIS IS/IEC 60947-3 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS
CSA IEC 61000-6-2 : 2008	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
03/309760 DC : DRAFT JUNE 2003	IEC 62257-3 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
BS EN 61674 : 2013	MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING
BS IEC 62003 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - REQUIREMENTS FOR ELECTROMAGNETIC COMPATIBILITY TESTING
ASTM F 3020 : 2016	Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security
BS ISO/IEC 14709-1 : 1997
BS ISO 17966 : 2016	ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS
09/30176792 DC : 0	BS EN 61513 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
UNE EN 61000-4-22 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS)
17/30352682 DC : 0	BS IEC 60268-4 ED6.0 - SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
IEC TS 62257-3 : 2.0	RECOMMENDATIONS FOR RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
BS EN 61098 : 2007	RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
CEI EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
BS EN 60945 : 2002	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
CSA IEC 61000-6-2 : 2008 : R2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
BS EN ISO 20072 : 2013	AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
04/30031093 DC : DRAFT FEB 2004	ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
07/30170091 DC : DRAFT AUG 2007	BS ISO 22200 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
DIN EN ISO 13856-1 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
BS EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
PREN 14908-2 : DRAFT 2012	OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 2: TWISTED PAIR COMMUNICATION
06/30148088 DC : DRAFT MAR 2006	IEC 60255-22-3 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-3: ELECTRICAL DISTURBANCE TESTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT - RADIATED ELECTROMAGNETIC FIELD DISTURBANCE TESTS
CEI EN 60044-8 : 2004	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
BS EN 61326-3-2 : 2008	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
I.S. EN 60846:2004	RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
NF EN 61000-4-1 : 2007
TR 134 926 : 13.0.0	UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ELECTROMAGNETIC COMPATIBILITY (EMC); TABLE OF INTERNATIONAL REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TR 34.926 VERSION 14.0.0 RELEASE 14)
BS EN 60255-26 : 2013	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
13/30281011 DC : 0	BS EN 61000-6-5 ED.1.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR POWER STATION AND SUBSTATION ENVIRONMENTS
UNI EN ISO 21649 : 2009	NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
SAE J 551/16 : 2017	ELECTROMAGNETIC IMMUNITY - OFF-VEHICLE SOURCE (REVERBERATION CHAMBER METHOD) - PART 16: IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS
UNI EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
NF EN 61000-6-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
12/30244783 DC : 0	BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 62244 : 2011	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
ISO 11614 : 1999(R2015)	RECIPROCATING INTERNAL COMBUSTION COMPRESSION-IGNITION ENGINES - APPARATUS FOR MEASUREMENT OF THE OPACITY AND FOR DETERMINATION OF THE LIGHT ABSORPTION COEFFICIENT OF EXHAUST GAS
03/318812 DC : DRAFT NOV 2003	IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
UNI EN 1300 : 2014	SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
11/30241337 DC : DRAFT JAN 2011	BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
14/30284930 DC : 0	BS EN 62689-2 ED 1.0 - CURRENT AND VOLTAGE SENSORS OR DETECTORS TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 2: GENERAL PRINCIPLES AND REQUIREMENTS
13/30289289 DC : 0	BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
NBR IEC 61851-21 : 2013	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELETRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C SUPPLY
BS EN 60601-1-2 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS AND TESTS
BS EN 60861 : 2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
BS IEC 60325 : 2002	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
DIN EN ISO 13856-3 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
11/30255400 DC : 0	BS EN 50293 - ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS
10/30189547 DC : 0	BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
IEC 60747-14-4 : 1.0	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
14/30279327 DC : 0	BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
UNE EN 60947-3 : 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
I.S. EN 60761-1:2004	EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
00/716717 DC : DRAFT NOV 2000
ASTM E 1965 : 1998 : R2009	Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
BS PD IEC TR 60601-4-2 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 4-2: GUIDANCE AND INTERPRETATION - ELECTROMAGNETIC IMMUNITY: PERFORMANCE OF MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
BS EN 61587-3 : 2013	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 3: ELECTROMAGNETIC SHIELDING PERFORMANCE TESTS FOR CABINETS, RACKS AND SUBRACKS
BS EN 62022 : 2007	INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
I.S. EN 62327:2011	RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE INDICATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION
BS EN 60974-10 : 2014	ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
OIML R 139-1 : 2014	COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
00/715261 DC : DRAFT DEC 2000	IEC 60325 - ALPHA, BETA AND ALPHA-BETA CONTAMINATION METERS AND MONITORS
01/200383 DC : DRAFT JAN 2001	IEC 61000-4-6 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES. IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
CEI EN 62026-7 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
IEC 61017 : 1ED 2016	RADIATION PROTECTION INSTRUMENTATION TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING
IEC 62706 : 1ED 2012	RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS
DIN EN ISO 8041-1 : 2017	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017)
BS EN 61786-1 : 2014	MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
CSA C60044-7 : 2007	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
03/100499 DC : DRAFT JUNE 2003	IEC 60947-6-1 AMD 3. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - AUTOMATIC TRANSFER SWITCHING EQUIPMENT
14/30318354 DC : 0	BS EN 61326-3-2 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
NBR IEC 62080 : 2011	SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
13/30285941 DC : 0	BS EN 62041 - SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
I.S. EN 62026-2:2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD))
CEI EN 61260-1 : 2017	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
EN 62533 : 2016	RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR PHOTON DETECTION OF RADIOACTIVE MATERIAL (IEC 62533:2010, MODIFIED)
BS EN 61131-9 : 2013	PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI)
BS EN 60947-6-2 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
BS EN 62533 : 2016	RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR PHOTON DETECTION OF RADIOACTIVE MATERIAL
11/30243576 DC : DRAFT FEB 2011	BS EN 62643-1 - ELECTROSTATIC MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 60947-4-2 : 2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
CEI EN 61514 : 2002	INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS
CEI EN 62026-1 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
BS EN 60804 : 2001	INTEGRATING-AVERAGING SOUND LEVEL METERS
PREN 14236 : DRAFT 2017	ULTRASONIC DOMESTIC GAS METERS
BS IEC 60951-1 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - RADIATION MONITORING FOR ACCIDENT AND POST-ACCIDENT CONDITIONS - PART 1: GENERAL REQUIREMENTS
CEI EN 62244 : 2012	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
BS EN 61000-1-2 : 2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
PREN 50121-4 : DRAFT 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
IEC 61000-4-6 REDLINE : 3.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
CSA CISPR 16-2-3 : 2012	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
00/244828 DC : DRAFT OCT 2000	IEC 61983 ED. 1.0 - MEASUREMENT AND EVALUATION OF HIGH FREQUENCY (9 KHZ TO 300 GHZ) ELECTROMAGNETIC FIELDS WITH REGARD TO HUMAN EXPOSURE
CEI EN 61582 : 2007	RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
14/30282284 DC : 0	BS ISO 18185-3 - FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 3: ENVIRONMENTAL CHARACTERISTICS
BS EN 60268-4 : 2014	SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
BS EN 62488-1 : 2013	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
BIS IS 12552 : 2012	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
BS IEC 60747-14-4 : 2011	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
BS EN ISO 4064-2 : 2017	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
BS EN 61000-5-7 : 2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-7: INSTALLATION AND MITIGATION GUIDELINES - DEGREES OF PROTECTION BY ENCLOSURES AGAINST ELECTROMAGNETIC DISTURBANCES (EM CODE)
NF EN 61582 : 2006	RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
CEI EN 60044-7 : 2001	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
03/100589 DC : DRAFT JULY 2003	IEC 60947-3 AMD 2. ED 2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
16/30340740 DC : 0	BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
BS ISO 17089-1 : 2019	MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
BS EN 61800-5-2 : 2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL (IEC 61800-5-2:2016)
12/30267815 DC : 0	BS EN 1643 - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES
IEC 61326-3-2 : 2.0	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
13/30267625 DC : 0	BS EN 61481-2 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C
NF EN 62841-1 : 2016	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
TS 136 113 : 13.0.0	LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); BASE STATION (BS) AND REPEATER ELECTROMAGNETIC COMPATIBILITY (EMC) (3GPP TS 36.113 VERSION 14.2.0 RELEASE 14)
BS EN 61000-6-2 : 2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
I.S. EN 62282-3-201:2017	FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
13/30252780 DC : 0	BS EN 50121-5 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
BS EN 60947-5-3 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
PIP PCSCP001 : 2009	CONTROL PANELS SPECIFICATION
BS EN 62083 : 2009	MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
DD IEC TS 62257-3 : DRAFT 2004	RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
AAMI ID26 : 2004	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
I.S. EN 50065-2-3:2003	SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS
ISO 22200 : 2009	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
DIN EN 14846 : 2015	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
BS EN 60546-1 : 2010	CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
EN 61851-22 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - AC ELECTRIC VEHICLE CHARGING STATION
IEC 62236-4 REDLINE : 3ED 2018	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
EN IEC 60942 : 2018	ELECTROACOUSTICS - SOUND CALIBRATORS (IEC 60942:2017)
05/30133337 DC : DRAFT MAY 2005	IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK
08/30195242 DC : 0	BS EN 62599-2 IEC 62599 - ALARM SYSTEMS - GENERAL REQUIREMENTS - PART 2 - ELECTRO-MAGNETIC COMPATIBILITY
IEC 61344 : 1.0	RADIATION PROTECTION INSTRUMENTATION - MONITORING EQUIPMENT - PERSONAL WARNING DEVICES FOR X AND GAMMA RADIATIONS
11/30245183 DC : 0	BS EN 62115 PRAB - ELECTRIC TOYS - SAFETY
BS IEC 61559-1 : 2009	RADIATION PROTECTION INSTRUMENTATION IN NUCLEAR FACILITIES - CENTRALIZED SYSTEMS FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY - PART 1: GENERAL REQUIREMENTS
EN 62689-1 : 2016	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS (IEC 62689-1:2016)
BS EN 12405-3 : 2015	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
TS 103 361 : 1.1.1	SHORT RANGE DEVICES (SRD) USING ULTRA WIDE BAND TECHNOLOGY (UWB); RECEIVER TECHNICAL REQUIREMENTS, PARAMETERS AND MEASUREMENT PROCEDURES TO FULFIL THE REQUIREMENTS OF THE DIRECTIVE 2014/53/EU
AAMI IEC 60601-1-2 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
BS EN 60044-7 : 2000	INSTRUMENT TRANSFORMERS - PART 7 - ELECTRONIC VOLTAGE TRANSFORMERS
IEEE 1909.1 : 2014	RECOMMENDED PRACTICE FOR SMART GRID COMMUNICATIONS EQUIPMENT - TEST METHODS AND INSTALLATION REQUIREMENTS
DD IEC PAS 62026-7 : DRAFT 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
BS IEC 61017 : 2016	RADIATION PROTECTION INSTRUMENTATION - TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING
DIN EN 45501 E : 2016	METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
12/30241725 DC : 0	BS ISO 28057 - DOSIMETRY WITH SOLID THERMOLUMINSCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY
02/540559 DC : DRAFT JULY 2002	EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
09/30200143 DC : 0	BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
BIS IS/IEC 60947-5-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 1: ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
ISO 18185-3 : 2015	FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 3: ENVIRONMENTAL CHARACTERISTICS
11/30213789 DC : 0	BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING
02/208921 DC : DRAFT AUG 2002	IEC 62052-21 ED.1 - ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
NF EN 60846-1 : 2015	RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
BS IEC 61584 : 2001	RADIATION PROTECTION INSTRUMENTATION - INSTALLED, PORTABLE OR TRANSPORTABLE ASSEMBLIES - MEASUREMENT OF AIR KERMA DIRECTION AND AIR KERMA RATE
16/30319034 DC : 0	BS EN 60601-2-2 ED 6.0 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
BS ISO 28057 : 2014	DOSIMETRY WITH SOLID THERMOLUMINESCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY
05/30127272 DC : DRAFT JAN 2005	EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS
UNE EN 61481-1 : 2015	LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C
16/30287716 DC : 0	BS IEC 62692 ED 1.0 - ALARM AND ELECTRONIC SECURITY SYSTEMS - DIGITAL DOOR LOCK SYSTEMS - REQUIREMENTS AND TEST METHODS
BS EN 62026-7 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
08/30168258 DC : 0	BS IEC 62534 - RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
UNE EN 60947-5-2 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
BS EN 60255-22-3 : 2008	MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-3: ELECTRICAL DISTURBANCE TESTS - RADIATED ELECTROMAGNETIC FIELD IMMUNITY
DIN EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
UNI EN 14846 : 2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 13856-1:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
BS EN 60942 : 2003	ELECTROACOUSTICS - SOUND CALIBRATORS
BS IEC 62484 : 2010	RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
OIML R 50-1 : 2014	CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
NF EN 61000-6-2 : 2006	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
08/30101302 DC : DRAFT JAN 2008	BS ISO 17334 - METALLIC AND OTHER INORGANIC COATINGS - AUTOCATALYTIC NICKEL OVER AUTOCATALYTIC COPPER FOR ELECTROMAGNETIC SHIELDING
BS EN 61514 : 2002	INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONS WITH PNEUMATIC OUTPUTS
CEI EN 61131-6 : 2013	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
NF EN 55016-2-3 : 2017	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
PREN ISO 80601-2-61 : DRAFT 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
CLC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS (IEC/TS 62603-1:2014)
BS EN 61131-6 : 2012	PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
I.S. EN 61326-3-1:2017	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
NF EN 50136-2-1 : 98 AMD 1 2002	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR EQUIPMENT USED IN SYSTEMS USING DEDICATED ALARM PATHS
NF EN 62920 : 2017	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT
CSA C61000-6-1 : 2009(R2018)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
02/203203 DC : DRAFT FEB 2002	IEC 60873. ED.2 - METHODS OF EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS
BS EN 61676 : 2002	MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY
03/311729 DC : DRAFT JULY 2003	EN ISO 8041 - HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
CSA IEC 61000-6-2 : 2008 : R2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
14/30298973 DC : 0	BS EN 60051-1 - DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS
09/30208590 DC : 0	BS EN 61672-2 ED.2 - ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS
PIP PCSCP001 : 2014	CONTROL PANELS SPECIFICATION
BS IEC 61526 : 1998	RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP (10) AND HP (0,07) FOR X, GAMMA AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT AND/OR DOSE EQUIVALENT RATE DOSEMETERS
11/30239643 DC : 0	BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
OIML R 99-1 & 2 : 2008	INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
11/30229935 DC : 0	BS EN 62671 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - SELECTION AND USE OF INDUSTRIAL DIGITAL DEVICES OF LIMITED FUNCTIONALITY
CEI EN 60325 : 2005	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
BS IEC 60861 : 2006	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
I.S. EN 61000-4-39:2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-39: TESTING AND MEASUREMENT TECHNIQUES - RADIATED FIELDS IN CLOSE PROXIMITY - IMMUNITY TEST
BS EN 50370-2 : 2003
01/204134 DC : DRAFT JUN 2001	IEC 62132-1 ED.1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY, 150 KHZ TO 1 GHZ - PART 1: GENERAL AND DEFINITIONS
CSA CEI/IEC 61000.4.15 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 15: FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS
08/30195483 DC : 0	BS EN 61812-1 - TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
BS EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
OIML R 117-1 : 2007	DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
I.S. EN 62484:2015	RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
08/30187038 DC : DRAFT JULY 2008	BS EN 55016-2-3 AMD1 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
10/30219053 DC : 0	BS EN 50130-4 - ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
BS EN 61851-22 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - AC ELECTRIC VEHICLE CHARGING STATION
13/30252777 DC : 0	BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
UNI CEI EN ISO 4064-2 : 2014	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
NF EN 50412-2-1 : 2006	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
BS EN 61252 : 1997	ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS
16/30338981 DC : 0	BS EN 60934 - CIRCUIT-BREAKERS FOR EQUIPMENT (CBE)
BS EN 50325-2 : 2001	INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 2: DEVICENET
UNI EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
CSA C22.2 No. 257 : 2006 : R2015	INTERCONNECTING INVERTER-BASED MICRO-DISTRIBUTED RESOURCES TO DISTRIBUTION SYSTEMS
BS 6840-4(1997) : 1997	SOUND SYSTEM EQUIPMENT - MICROPHONES
I.S. EN 61326-3-2:2008	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
BS EN 61037 : 1993	ELECTRICITY METERING - TARIFF AND LOAD CONTROL - PARTICULAR REQUIREMENTS FOR ELECTRONIC RIPPLE CONTROL RECEIVERS
DD IEC TS 62091 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLERS FOR DRIVERS OF STATIONARY FIRE PUMPS
BS IEC 61513 : 2011	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
16/30340737 DC : 0	BS EN 50121-4 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 4: EMISSION AND IMMUNITY OF THE SIGNALLING AND TELECOMMUNICATIONS APPARATUS
ASTM E 1965 : 1998	Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
BS EN 55103-2 : 2009	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY
BS EN 61000-4-39 : 2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-39: TESTING AND MEASUREMENT TECHNIQUES - RADIATED FIELDS IN CLOSE PROXIMITY - IMMUNITY TEST (IEC 61000-4-39:2017)
BS EN 60255-22-6 : 2001	ELECTRICAL RELAYS - PART 22-6: ELECTRICAL DISTURBANCE TESTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT - IMMUNITY TO CONDUCTED DISTURBANCES INDUCED BY RADIO FREQUENCY FIELDS
CEI EN 61869-6 : 1ED 2017	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
CEI EN 61975 : 2013	HIGH-VOLTAGE DIRECT CURRENT (HVDC) INSTALLATIONS - SYSTEM TESTS
12/30265786 DC : 0	BS EN 14908-2 - OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - CONTROL NETWORK PROTOCOL - PART 2: TWISTED PAIR COMMUNICATION
14/30291768 DC : 0	BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS
10/30235503 DC : 0	BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
CEI EN 60942 : 2004	ELECTROACOUSTICS SOUND CALIBRATORS
BS ISO 17593 : 2007	CLINICAL LABORATORY TESTING AND IN VITRO MEDICAL DEVICES - REQUIREMENTS FOR IN VITRO MONITORING SYSTEMS FOR SELF-TESTING OF ORAL ANTICOAGULANT THERAPY
IEEE DRAFT 1309 : D2.0 2005	CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ
I.S. EN 50065-2-2:2003	SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS
BS ISO 11614 : 1999	RECIPROCATING INTERNAL COMBUSTION COMPRESSION-IGNITION ENGINES - APPARATUS FOR MEASUREMENT OF THE OPACITY AND FOR DETERMINATION OF THE LIGHT ABSORPTION COEFFICIENT OF EXHAUST GAS
BS ISO 17363 : 2013	SUPPLY CHAIN APPLICATIONS OF RFID - FREIGHT CONTAINERS
08/30170297 DC : DRAFT MAR 2008	BS EN 62083 - MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
NBR IEC 60601-2-2 : 2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
14/30302089 DC : 0	BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
13/30294866 DC : 0	BS EN 61058-1 - SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
DIN ISO 16000-29 E : 2015	INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014)
BS EN 61850-3 : 2014	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS
BS EN 62135-2 : 2015	RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
97/207802 DC : DRAFT JUL 1997	IEC 62026-6 - CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6: SERIAL MULTIPLEXED CONTROL BUS (SMCB)
AAMI IEC 60601-2-2 : 2017	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
14/30297218 DC : 0	BS EN 61000-6-1 ED.3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
15/30324675 DC : 0	BS CISPR 35 ED1.0 - ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS
13/30280680 DC : 0	BS EN 60947-3:2009+A1:2012+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
BS EN 50065-2-1 : 2003	SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS
BS EN 60947-8 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES
NF EN 62026-3 : 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 3: DEVICENET
12/30257022 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 50082-1 : 1997	ELECTROMAGNETIC COMPATIBILITY (EMC) - GENERIC IMMUNITY STANDARD - PART 1: RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY
NF EN 61326 : 97 AMD 3 2004	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - GENERAL REQUIREMENTS
EN IEC 61058-1 : 2018	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS (IEC 61058-1:2016)
BS EN 62689-1 : 2016	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
12/30264287 DC : 0	BS EN 60118-13 ED.4 - ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATABILITY (EMC) (REVISION OF IEC 60118-13: 2011)
NF EN 62041 : 2011	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
17/30370691 DC : 0	BS EN 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
IEC 60601-2-2 : 6.0	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
BS EN 60308 : 2005	HYDRAULIC TURBINES - TESTING OF CONTROL SYSTEMS
DD IEC TS 61000-1-2 : 2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA
07/30163348 DC : 0	BS EN 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
IEEE 1309 : 2013	CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES (EXCLUDING ANTENNAS) FROM 9 KHZ TO 40 GHZ
06/30148723 DC : DRAFT APR 2006	IEC 62026-3 ED.2.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (C DIS) - PART 3: DEVICENET
BS EN 62115 : 2005	ELECTRIC TOYS - SAFETY
NBR 15415 : 2006	MEASUREMENT METHODS AND REFERENCE LEVELS FOR EXPOSURE TO 50 HZ AND 60 HZ ELECTRIC AND MAGNETIC FIELDS
BS IEC 62534 : 2010	RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
IEC 61800-3 REDLINE : 3ED 2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
11/30231451 DC : DRAFT SEP 2011	BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
BS PD CLC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
11/30242273 DC : 0	BS EN 61786-1 - MEASUREMENT OF DC MAGNETIC FIELDS, AC MAGNETIC AND ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: SPECIAL REQUIREMENTS FOR INSTRUMENTS
CEI EN 62052-21 : 2005	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
CEI EN 60580 : 2001	MEDICAL ELECTRICAL EQUIPMENT DOSE AREA PRODUCT METERS
I.S. EN 61000-6-1:2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
CEI EN 61547 : 2010	EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS
CEI EN 61967-2 : 2006	INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 2: MEASUREMENT OF RADIATED EMISSIONS - TEM CELL AND WIDEBAND TEM CELL METHOD
CEI EN 61326-3-2 : 2011	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
CEI EN 62343-2 : 2015	DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
14/30273400 DC : 0	BS EN 61975:2010+A1 - HIGH-VOLTAGE DIRECT CURRENT (HVDC) INSTALLATIONS - SYSTEM TESTS
04/30113789 DC : DRAFT MAY 2004	EN 60846 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
I.S. EN 61975:2010	HIGH-VOLTAGE DIRECT CURRENT (HVDC) INSTALLATIONS - SYSTEM TESTS
BS EN 62132-2 : 2011	INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 2: MEASUREMENT OF RADIATED IMMUNITY - TEM CELL AND WIDEBAND TEM CELL METHOD
NF EN 60770-1 : 2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
13/30260741 DC : 0	BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
BS EN 62920 : 2017	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT (IEC 62920:2017)
NF EN 60947-5-1 : 2004 AMD 1 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 50082-1 : 1998	ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY
BS EN 62484 : 2015	RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
BS EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
BS EN 61757-1 : 2012	FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
10/30227237 DC : 0	BS EN 62488-1 - PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS - PART 1: OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
BS EN 50412-2-1 : 2005	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
DIN EN ISO 4064-2 E : 2017	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
12/30268049 DC : 0	BS EN 62689-1 - CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
08/30185354 DC : DRAFT JULY 2008
16/30339801 DC : 0	BS EN 63052 - POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICES FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
16/30269922 DC : 0	BS EN 61851-21-2 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: EMC REQUIRMENTS FOR OFF BOARD ELECTRIC VEHICLE CHARGING SYSTEMS
BS EN 55016-2-3 : 2017	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
BS EN 62343-2 : 2014	DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
IEC TR 60601-4-2 : 1ED 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 4-2: GUIDANCE AND INTERPRETATION - ELECTROMAGNETIC IMMUNITY: PERFORMANCE OF MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS
13/30280815 DC : 0	BS EN 62343-2 - DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION
ISO 14708-3 : 2017	IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 3: IMPLANTABLE NEUROSTIMULATORS
BS EN 61038 : 1993	ELECTRICITY METERING - TARIFF AND LOAD CONTROLS - PARTICULAR REQUIREMENTS FOR TIME SWITCHES
10/30216020 DC : 0
08/30163012 DC : DRAFT FEB 2008	BS ISO 7176-21 - WHEELCHAIRS - PART 21: REQUIREMENTS AND TEST METHODS FOR ELECTROMAGNETIC COMPATIBILITY OF ELECTRICALLY POWERED WHEELCHAIRS AND SCOOTERS, AND BATTERY CHANGES
CISPR 16-2-3 REDLINE : 4ED 2016	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
09/30193787 DC : 0	BS EN 62026-7 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
BS EN 50121-3-2 : 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
OIML R 21 : 2007	TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT
SR CLC/TS 62603-1:2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
CEI EN 50121-3-2 : 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
18/30368636 DC : 0	BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY
13/30267621 DC : 0	BS EN 61481-1 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
CEI EN 62041 : 2012	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
16/30340734 DC : 0	BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
04/30121678 DC : DRAFT AUG 2004
10/30238943 DC : 0	BS EN 61000-6-7 ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL ENVIRONMENTS
CEI EN 61513 : 2013	NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS
BS EN ISO 8041-1 : 2017	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS
14/30257546 DC : 0	BS ISO 17966 - ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS
BS EN 50121-5 : 2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
CEI EN 60947-5-9 : 2008	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
BS ISO 18185-3 : 2006	FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 3: ENVIRONMENTAL CHARACTERISTICS
CEI EN 60546-1 : 2011	CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
BS IEC 62533 : 2010	RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR PHOTON DETECTION OF RADIOACTIVE MATERIAL
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
11/30244681 DC : 0	BS IEC 62706 - RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS
BS IEC 60768 : 2009	NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - EQUIPMENT FOR CONTINUOUS IN-LINE OR ON-LINE MONITORING OF RADIOACTIVITY IN PROCESS STREAMS FOR NORMAL AND INCIDENT CONDITIONS
BS PD IEC TR 61000-1-6 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-6: GENERAL - GUIDE TO THE ASSESSMENT OF MEASUREMENT UNCERTAINTY
14/30318350 DC : 0	BS EN 61326-3-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
10/30217314 DC : 0	BS EN 298 - AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS
06/30157139 DC : 0
IEC 62327 : 2.0	RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE ESTIMATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION
11/30254162 DC : 0	BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
08/30177627 DC : DRAFT FEB 2008	BS EN 61000-4-22 - ELECTROMAGNETIC COMPATIBILITY - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSIONS AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS)
08/30177580 DC : DRAFT FEB 2008	BS EN 61260-1 - ELECTRO ACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
NF EN 60947 6-1 : 2006 AMD 1 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT
IEEE C37.90.2 : 2004	WITHSTAND CAPABILITY OF RELAY SYSTEMS TO RADIATED ELECTROMAGNETIC INTERFERENCE FROM TRANSCEIVERS
UNE EN 62115 : 2006	ELECTRIC TOYS - SAFETY
UNE EN 50293 : 2013	ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY
BS PD IEC TS 62370 : 2004	ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - ELECTROMAGNETIC AND ELECTROSTATIC COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
BS EN 61481-2 : 2014	LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
97/207799 DC : DRAFT JUL 1997	IEC 62026-3 - CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: DEVICE NETWORK (DN)
BS EN 61260 : 1996	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
IEC 61851-22 : 1.0	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
03/306274 DC : 0
CEI EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 61036 : 1997	ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
I.S. EN 61000-6-5:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
CEI EN 61000-4-22 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS)
BS ISO/IEC 18046-2 : 2011	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
CEI EN 61587-3 : 2014	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 3: ELECTROMAGNETIC SHIELDING PERFORMANCE TESTS FOR CABINETS AND SUBRACKS
08/30152793 DC : DRAFT DEC 2008	BS IEC 62484 - RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
09/30214220 DC : 0	BS IEC TR 61000-2-5 ED - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
EN 61975 : 2010 AMD 1 2017	HIGH-VOLTAGE DIRECT CURRENT (HVDC) INSTALLATIONS - SYSTEM TESTS (IEC 61975:2010/A1:2016)
CSA C22.2 No. 80601-2-56 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-56: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CLINICAL THERMOMETERS FOR BODY TEMPERATURE MEASUREMENT
98/262470 DC : DRAFT JUL 1998	IEC 61987 ED. 1 - TERMS AND STRUCTURES OF MEASURING EQUIPMENT
BS EN 61000-6-5 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
ISO 17334 : 2008(R2018)	METALLIC AND OTHER INORGANIC COATINGS - AUTOCATALYTIC NICKEL OVER AUTOCATALYTIC COPPER FOR ELECTROMAGNETIC SHIELDING
00/243920 DC : DRAFT AUG 2000	CISPR 20. ED. 5. SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
14/30269850 DC : 0	BS EN 62135-2 - ED 2.0 - RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
ANSI N42.44 : 2008	PERFORMANCE OF CHECKPOINT CABINET X-RAY IMAGING SECURITY SYSTEMS
CEI EN 60601-1-2 : 2016	MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS
BS IEC 62706 : 2012	RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS
10/30193516 DC : 0	BS EN 60947-5-2:2007+A1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
DIN EN 14846 E : 2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
07/30126760 DC : 0	IEC 61559-1 - RADIATION PROTECTION INSTRUMENTATION - INSTRUMENTATION AND CONTROL OF NUCLEAR FACILITIES - PART 1: CENTRALIZED SYSTEM FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY
97/207801 DC : DRAFT JUL 1997	IEC 62026-5 - CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: SMART DISTRIBUTED SYSTEM (SDS)
BS EN 61326-1 : 2013	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
BS EN 62387-1 : 2012	RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007, MODIFIED)
04/30115154 DC : DRAFT JUN 2004	EN 50412-1 - IMMUNITY REQUIREMENTS FOR POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT
ANSI N42.55 : 2013	PERFORMANCE OF PORTABLE TRANSMISSION X-RAY SYSTEMS FOR USE IN IMPROVISED EXPLOSIVE DEVICE AND HAZARDOUS DEVICE IDENTIFICATION
13/30292662 DC : 0	BS EN 61260-2 ED.1.0 - ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN EVALUATION TESTS
CEI EN 62606 : 2014	GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
00/560888 DC : APR 2000	IEC 60601-1-2 EDITION 2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS AND TESTS
BS EN 61260-2 : 2016	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
BS EN 62310-2 : 2007	STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
IEC TS 62091 : 1ED 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLERS FOR DRIVERS OF STATIONARY FIRE PUMPS
06/30150482 DC : DRAFT MAY 2006	IEC CISPR 14-2 AMD 2 - ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD
15/30328943 DC : 0	BS EN 63024 ED1.0 - REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARD[S]) FOR CIRCUIT BREAKERS- RCBO[S],RCCB[S] FOR HOUSEHOLD AND SIMILAR USES
06/30113526 DC : DRAFT JAN 2006
UNE EN 55016-2-3 : 2017	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
BS EN 50557 : 2011	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
CEI EN 61098 : 2008	RADIATION PROTECTION INSTRUMENTATION - INSTALLED PERSONNEL SURFACE CONTAMINATION MONITORING ASSEMBLIES
UNE EN 61000-4-6 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
CEI 18-54 : 2003	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: SPECIAL FEATURES - CONTROL AND INSTRUMENTATION
I.S. EN 61260-1:2014	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
BS EN 61204-3 : 2001	LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
DIN ISO 16000-29 : 2015	INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS (ISO 16000-29:2014)
02/205627 DC : DRAFT APR 2002	IEC 60747-14-4. ED.1.0 - DISCRETE SEMICONDUCTOR DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
12/30262731 DC : 0	BS ISO 16000-29 - INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS
CISPR 14-2 REDLINE : 2ED 2015	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD
BS PD IEC TS 62257-3 : 2015	RECOMMENDATIONS FOR RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
07/30165742 DC : 0	BS EN 60947-4-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
OIML R 137-1 : 2006	GAS METERS - PART 1: REQUIREMENTS
IEC TS 62370 : 1.1	ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - ELECTROMAGNETIC AND ELECTROSTATIC COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
BS EN 61000-4-20 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
EN IEC 60601-2-2 : 2018	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES (IEC 60601-2-2:2017)
UNE EN 55103-2 : 2010	ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY
CEI EN 61812-1 : 2012	TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS
BS EN 61000-4-22 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS)
06/30154544 DC : DRAFT AUG 2006	EN 60601-2-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
04/30124466 DC : DRAFT OCT 2004	EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
UNE 199031-2 : 2011	ROAD TRAFFIC MANAGEMENT EQUIPMENT - DATA CAPTURE STATIONS - TEST AND PROOF METHODS - PART 2: ELECTROMAGNETIC COMPATIBILITY
OIML R 129 : 2000	MULTI-DIMENSIONAL MEASURING INSTRUMENTS
11/30213786 DC : 0	BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
BS EN 61967-2 : 2005	INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 2: MEASUREMENT OF RADIATED EMISSIONS - TEM CELL AND WIDEBAND TEM CELL METHOD
BS EN 60325 : 2004	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
DNV/GL-OS-D202 : LATEST	AUTOMATION, SAFETY AND TELECOMMUNICATION SYSTEMS
I.S. EN IEC 60601-2-2:2018	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
PREN 50121-5 : DRAFT 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
BS EN 50491-5-2 : 2010	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT
17/30370039 DC : 0	BS IEC 62026-1 ED.3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
BS PD IEC TS 61000-5-10 : 2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-10: INSTALLATION AND MITIGATION GUIDELINES - GUIDANCE ON THE PROTECTION OF FACILITIES AGAINST HEMP AND IEMI
NF EN 61204-3 : 2001	LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
BS EN 61800-3 : 2004	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
NF EN 55024 : 2011 AMD 1 2015	INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
NF EN 62040-2 : 2006
04/30116077 DC : DRAFT JUL 2004
06/30119052 DC : DRAFT MAR 2006	IEC 62387 - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING FOR EXTERNAL PHOTON AND BETA RADIATION USING ELECTRONIC DEVICES FOR THE DATA EVALUATION - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS ON DOSIMETRY SYSTEMS
BS ISO 17089-1 : 2010	MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
NF EN 60947-5-3 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
CSA E61496.1 : 2004	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
09/30168253 DC : DRAFT FEB 2009	BS IEC 62533 - RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR PHOTON DETECTION OF RADIOACTIVE MATERIAL
12/30265715 DC : 0	BS EN 14-2/A3 ED1 - ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - TECHNICAL AND EDITORIAL REVIEW
BS IEC 60532 : 2010	RADIATION PROTECTION INSTRUMENTATION - INSTALLED DOSE RATE METERS, WARNING ASSEMBLIES AND MONITORS - X AND GAMMA RADIATION OF ENERGY BETWEEN 50 KEV AND 7 MEV
BS EN 60601-2-30 : 2000	MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE SAFETY, INCLUDING ESSENTIAL PERFORMANCE, OF AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT
CEI EN 62488-2 : 1ED 2018	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
02/709474 DC : DRAFT JULY 2002	BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNE EN 1300 : 2014	SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS EN 50491-5-1 : 2010	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP
08/30157876 DC : 0
10/30216008 DC : 0	BS EN 61326-1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60770-1:2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
09/30191349 DC : 0	BS EN 60268-4 ED.4 - SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES (GMT)
BS EN 60846 : 2004	RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION
UNE EN 61000-6-5 : 2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT
BS PD IEC TR 62350 : 2006	GUIDANCE FOR THE CORRECT USE OF RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE
DIN EN ISO 8041-1 E : 2017	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017)
OIML R 146-1 : 2016	PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
BS EN 60580 : 2000	DOSE AREA PRODUCT METERS
CEI EN 62132-2 : 2012	INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY PART 2: MEASUREMENT OF RADIATED IMMUNITY - TEM CELL AND WIDEBAND TEM CELL METHOD
98/704428 DC : DRAFT FEB 1998	ISO/CD 16100 - AUTOMATIC INTEGRATED ENVIRONMENTAL CONTROL SYSTEMS
17/30352734 DC : 0	BS EN 60947-5-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
IEC 60092-504 REDLINE : 4ED 2016	ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
04/30039291 DC : DRAFT NOV 2004
15/30316128 DC : 0	BS EN ISO 14708-3 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 3: IMPLANTABLE NEUROSTIMULATORS
14/30309508 DC : 0	BS EN 61131-2 ED 4.0 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO - OR MULTI-STATE OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
BS IEC 62244 : 2006	RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS
13/30283500 DC : 0	BS EN 60533 ED 3.0 - ELECTRICAL AND ELECTRONIC INSTALLATIONS IN SHIPS - ELECTROMAGNETIC COMPATIBILITY
00/203722 DC : DRAFT AUG 2000	IEC 60118-13. ED.2 - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT STANDARD
BS EN 62041 : 2010	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS
03/306957 DC : DRAFT APR 2003	BS IEC 62022 - DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
DIN EN 12405-3 E : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
05/30137922 DC : DRAFT AUG 2005	ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
NF EN 62080 : 2010 AMD 2 2015	SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
10/30217545 DC : 0	BS EN 61674 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING
BS PD IEC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
07/30172925 DC : 0	BS IEC 60951-1 - NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - RADIATION MONITORING SYSTEM FOR ACCIDENT AND POST ACCIDENT CONDITIONS - PART 1: GENERAL REQUIREMENTS
04/30122100 DC : DRAFT SEP 2004	IEC 61587-3 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 3: ELECTROMAGNETIC SHIELDING PERFORMANCE TESTS FOR CABINETS, RACKS AND SUBRACKS
BS EN 61543 : 1996	RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR HOUSEHOLD AND SIMILAR USE - ELECTROMAGNETIC COMPATIBILITY
04/30067001 DC : DRAFT AUG 2004
IEEE 958 : 2003	GUIDE FOR APPLICATION OF AC ADJUSTABLE-SPEED DRIVES ON 2400 TO 13,800 VOLT AUXILIARY SYSTEMS IN ELECTRIC POWER GENERATING STATIONS
05/30137514 DC : DRAFT AUG 2005	IEC 60747-14-4 - DISCRETE SEMICONDUCTOR DEVICES - PART 14-4: SEMICONDUCTOR ACCELEROMETERS
BS EN 62282-3-201 : 2017	FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS
10/30208977 DC : 0	BS EN ISO 11608-1 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS
04/30112677 DC : 0	IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
BS EN 50463 : 2007	RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
03/100498 DC : DRAFT JUNE 2003	IEC 60947-5-3 AMD 1. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
06/30145396 DC : DRAFT JAN 2006	IEC 62026-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
13/30276231 DC : 0	BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
11/30254082 DC : 0	BS EN 61587-3 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 3: ELECTROMAGNETIC SHIELDING PERFORMANCE TESTS FOR CABINETS AND SUBRACKS
BS EN 50325-3 : 2001	INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 3: SMART DISTRIBUTED SYSTEM (SDS)
CSA C60044-7 : 2007 : R2016	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
OIML R 125 : 1998	MEASURING SYSTEMS FOR THE MASS OF LIQUIDS IN TANKS
12/30260040 DC : 0	BS EN 62270 - GUIDE FOR COMPUTER-BASED CONTROL FOR HYDROELECTRIC POWER PLANT AUTOMATION
OIML R 144-2 : 2013	INSTRUMENTS FOR CONTINUOUS MEASUREMENT OF CO, NO[X] IN STATIONARY SOURCE EMISSIONS - PART 2: METROLOGICAL AND PERFORMANCE TESTS
I.S. EN 61800-3:2005	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
18/30368743 DC : DRAFT APR 2018	BS EN 60947-6-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
07/30150067 DC : 0	BS IEC 60846-1 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
01/200684 DC : DRAFT FEB 2001
DIN EN ISO 13856-2 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
17/30352083 DC : DRAFT JUL 2017	BS EN 62244 - RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION PORTAL MONITORS (RPMS) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE AND NUCLEAR MATERIALS
OIML R 46-1 & 2 : 2012	ACTIVE ELECTRICAL ENERGY METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
13/30252774 DC : 0	BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
12/30238970 DC : 0	BS EN 60204-31 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
00/705404 DC : DRAFT FEB 2000
BS EN 61000-6-7 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS
14/30269872 DC : 0	BS EN 61017 ED 1.0 - RADIATION PROTECTION INSTRUMENTATION - TRANSPORTABLE, MOBILE OR INSTALLED EQUIPMENT TO MEASURE PHOTON RADIATION FOR ENVIRONMENTAL MONITORING
BS PD IEC TR 62685 : 2010	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
BS EN 50270 : 2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
15/30291884 DC : 0	BS EN 60947-5-1 AMD2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
11/30251478 DC : 0	BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
BS EN 61000-6-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
BS ISO 16000-29 : 2014	INDOOR AIR - PART 29: TEST METHODS FOR VOC DETECTORS
15/30326444 DC : 0	BS EN 60942 - ELECTROACOUSTICS - SOUND CALIBRATORS
BS EN 50293 : 2012	ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY
BS EN 62387 : 2016	RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION
BS EN 61260-1 : 2014	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
10/30240055 DC : DRAFT DEC 2010	BS EN 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
CEI EN 62327 : 2012	RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE INDICATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION
11/30244172 DC : 0	BS EN 61326-1 IEC 61326-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
BS EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
04/30081057 DC : DRAFT AUG 2004	EN ISO 10535 - HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
DD ENV ISO 14815 : 2000	ROAD TRANSPORT AND TRAFFIC TELEMATICS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - SYSTEM IDENTIFICATION
15/30302640 DC : 0	BS IEC 60092-504 ED 4.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION
05/30132835 DC : DRAFT APR 2005	IEC 60947-5-9 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
DIN EN 60546-1 : 2011	CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
BS EN 60947-5-9 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES
NBR IEC 60079-29-1 : 2008	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
14/30292140 DC : 0	BS EN 62040-2 ED3.0 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (EMC)
NF EN 60601-2-2 : 2009 AMD 11 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
CEI EN 62083 : 2011	MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
CEI EN 50370-2 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY
NBR IEC 60439-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
12/30268333 DC : 0	BS EN 62132-1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS
14/30297223 DC : 0	BS EN 61000-6-2 ED -3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
BS EN 61547 : 2009
04/30031075 DC : DRAFT FEB 2004	ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
04/19986707 DC : 0	BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS
UNE EN 60947-8 : 2005	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES
02/205824 DC : 0	PREN 50 XXX - BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
07/30145258 DC : 0	BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS
UNE EN 50130-4 : 2011	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
04/30078214 DC : DRAFT AUG 2004	IEC 61577-1 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 1: GENERAL PRINCIPLES
BS EN 1300 : 2013	SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
03/107915 DC : DRAFT MAY 2003	IEC 61000-6-2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
BS EN 61000-4-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
UNE EN 61786-1 : 2014	MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
PREN 12067-2 : DRAFT 2015	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - PART 2: FUEL/AIR RATIO CONTROL/SUPERVISION OF THE ELECTRONIC TYPE
BS EN 62534 : 2015	RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
PREN 50293 : DRAFT 2011	ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS
CSA C22.2 No. 60601.2.2 : 2009 : R2014	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
BS EN 50325-1 : 2002	INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 1: GENERAL REQUIREMENTS
16/30332623 DC : 0	BS EN 62920 ED 1.0 - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT APPLYING TO PHOTOVOLTAIC POWER GENERATING SYSTEMS
BS EN 62132-1 : 2016	INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS
UNI EN ISO 20072 : 2013	AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS
00/202085 DC : DRAFT MAY 2000	IEC 60669-2-1. ED. 4 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATION - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES
CEI EN 61851-22 : 2003	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
16/30328917 DC : DRAFT APR 2016	BS EN 62488-2 ED 1.0 - POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS (APLC)
UNE EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
00/710578 DC : DRAFT JUN 2000	IEC 61582-1 ED 1 - RADIATION PROTECTION INSTRUMENTATION - PART 1: EQUIPMENT FOR IN VIVO MONITORING - GENERAL REQUIREMENTS AND INSTALLED SYSTEMS
AAMI DF80 : 2003	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS]
I.S. EN 60942:2003	ELECTROACOUSTICS - SOUND CALIBRATORS
03/314745 DC : DRAFT SEP 2003	ISO 11252 - LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION
ASTM E 1965 : 1998	SPECIFICATION FOR INFRARED THERMOMETERS FOR INTERMITTENT DETERMINATION OF PATIENT TEMPERATURE
MIL PRF 28800 : F	TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
BS EN 50130-4 : 2011	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
BS IEC 60533 : 2015	ELECTRICAL AND ELECTRONIC INSTALLATIONS IN SHIPS - ELECTROMAGNETIC COMPATIBILITY (EMC) - SHIPS WITH A METALLIC HULL
CEI EN 62689-1 : 1ED 2017	CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
UNE EN ISO 4064-2 : 2015	WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
ASTM E 3137/E3137M : 2017	Standard Specification for Heat Meter Instrumentation
EN 60947-5-1 : 2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES (IEC 60947-5-1:2016 + COR1:2016)
EN 50121-5 : 2017	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 5: EMISSION AND IMMUNITY OF FIXED POWER SUPPLY INSTALLATIONS AND APPARATUS
IEC TR 61000-2-5 REDLINE : 3ED 2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - DESCRIPTION AND CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS
AAMI ID26 : 2004	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
09/30165933 DC : 0	BS EN 61975 - SYSTEM TESTS FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) INSTALLATIONS
AAMI ID26 : 2004 : R2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
AAMI DF80 : 2003 : R2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS]
05/30132097 DC : DRAFT JUNE 2005	IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
08/30177361 DC : DRAFT JAN 2008	BS IEC 60118-13 - ELECTRO ACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC)
BS EN 50065-2-2 : 2003	SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS
PREN 12405-3 : DRAFT 2013	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
BS EN 61582 : 2006	RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
95/204215 DC : DRAFT APRIL 1995
03/108042 DC : DRAFT MAY 2003	IEC 61000-4-1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES
07/30166127 DC : 0
NF EN 62026-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
07/30161929 DC : 0	BS EN 60118-13 - ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC)
CSA E61131.2 : 2006	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
OIML R 76-1 : 2006	NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
PREN 50130-4 : DRAFT 2010	ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
16/30312315 DC : 0	BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
06/30157864 DC : 0	BS EN 60947-5-1 AMD 2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
01/203790 DC : DRAFT JUNE 2001	IEC 62093 ED.1 - BALANCE-OF-SYSTEM COMPONENTS FOR PHOTO-VOLTAIC SYSTEMS - DESIGN QUALIFICATION AND TYPE APPROVAL
BS ISO 17334 : 2008	METALLIC AND OTHER INORGANIC COATINGS - AUTOCATALYTIC NICKEL OVER AUTOCATALYTIC COPPER FOR ELECTROMAGNETIC SHIELDING
I.S. EN 60861:2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
00/203618 DC : DRAFT AUG 2000	IEC 60255-26 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT
BS EN 60761-1 : 2004	EQUIPMENT FOR CONTINUOUS MONITORING OF RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
03/306642 DC : DRAFT APR 2003	EN 230 - AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS
CEI EN 62052-11 : 2003	ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
DIN EN 1434-4 : 2016	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
BS EN 61000-4-6 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
NF EN 60118-13 : 2012	ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC)
BS EN 61000-4-21 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
BS ISO 7176-21 : 2009	WHEELCHAIRS - PART 21: REQUIREMENTS AND TEST METHODS FOR ELECTROMAGNETIC COMPATIBILITY OF ELECTRICALLY POWERED WHEELCHAIRS AND SCOOTERS, AND BATTERY CHARGERS
NF EN 60325 : 2004	RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS
DD ENV 1300 : 1999	SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING
NF EN 55035 : 2017	ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS
09/30150998 DC : 0
IEC 63044-5-2 : 1ED 2017	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
CSA E61496.1 : 2004 : R2013	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
NBR NM-60335-1 : 2010	SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS
NBR IEC 60947-4-2 : 2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
CSA C61000-6-1 : 2009 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
AAMI DF80 : 2003	MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS]
14/30310418 DC : 0	BS EN 61000-4-39 ED. 1.0 - ELECTROMAGNETIC COMPATIBILTY (EMC) - PART 4-39: TESTING AND MEASUREMENT TECHNIQUES - RADIATED FIELDS IN CLOSE PROXIMITY IMMUNITY TEST
AAMI ID26 : 2004 : R2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS
UNE EN 55024 : 2011	INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
ANSI Z80.9 : 2010	OPHTHALMICS - DEVICES FOR LOW VISION
CEI EN 60118-13 : 2012	ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC)
ISA 12.13.01 : 2003	PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
I.S. EN 62310-2:2007	STATIC TRANSFER SYSTEMS (STS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
I.S. EN 61000-6-7:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS
CSA ISO/IEC 18046-2 : 2013 : R2017	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
BS EN 61975 : 2010	HIGH-VOLTAGE DIRECT CURRENT (HVDC) INSTALLATIONS - SYSTEM TESTS
09/30181956 DC : DRAFT MAY 2009	BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
03/107918 DC : DRAFT MAY 2003	IEC 61000-4-1 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
I.S. EN 60669-2-5:2016	SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
CEI EN 61000-6-2 : 2006	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS
CEI EN 61526 : 2013	RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
07/30165158 DC : 0
CEI EN 62488-1 : 2013	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 1: PLANNING OF ANALOGUE AND DIGITAL POWER LINE CARRIER SYSTEMS OPERATING OVER EHV/HV/MV ELECTRICITY GRIDS
CEI EN 61757-1 : 2013	FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
NBR IEC 60947-5-1 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
OIML R 143 : 2009	INSTRUMENTS FOR THE CONTINUOUS MEASUREMENT OF SO[2] IN STATIONARY SOURCE EMISSIONS
OIML R 81 : 1998	DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS
OIML R 85-1 & 2 : 2008	AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS
CEI EN 50557 : 2012	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
OIML R 137-1 & 2 : 2012 AMD 2014	GAS METERS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
NF EN 61326-1 : 2013	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
BS EN 60118-13 : 2011	ELECTROACOUSTICS - HEARING AIDS - PART 13: ELECTROMAGNETIC COMPATIBILITY (EMC)
CSA E61131.2 : 2006 : R2016	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
CSA E61496.1 : 2004	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
03/113382 DC : DRAFT SEP 2003	BS EN ISO 21649 - NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
BS EN 61779-1 : 2000	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
AAMI ISO 14708-4 : 2008 : R2011	IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS
CSA CISPR 16-2-3 : 2012 : R2017	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
NF EN 55020 : 2007 AMD 12 2016	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
IEEE 1613 : 2009	ENVIRONMENTAL AND TESTING REQUIREMENTS FOR COMMUNICATIONS NETWORKING DEVICES INSTALLED IN ELECTRIC POWER SUBSTATIONS
CSA C900.4 : 2013	HEAT METERS - PART 4: PATTERN APPROVAL TESTS
I.S. EN 61204-3:2000	LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
CEI EN 50412-2-1 : 2006	POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS
UNE EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
OIML R 139-2 : 2014	COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES - PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS
BS EN 62040-2 : 2006	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 62040-2:2005)
CSA CISPR 16-2-3 : 2012	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
NF EN 14846 : 2008	BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
NF EN 62841-2-9 : 2016	ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR HAND-HELD TAPPERS AND THREADERS
AAMI ISO 14708-4 : 2008	IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS
00/716716 DC : DRAFT NOV 2000
UNE EN 61000-6-7 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS
BS EN 61326 : 1998	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS
CSA C60044-7 : 2007 : R2011	INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS
NBR IEC 61851-22 : 2013	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C ELECTRIC VEHICLE CHARGING STATION
I.S. EN 61326:1998
09/30193520 DC : 0	BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
I.S. EN 60947-6-2:2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
IEC 60947-2 REDLINE : 5ED 2016	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
CSA Z9919 : 2007	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
NF EN 60861 : 2008	EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS
IEC 61204-3 REDLINE : 3ED 2016	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC)
SR CLC/TR 62685:2011	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV))
NF EN 60044-8 : 2006	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS
BS EN 62026-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 1: GENERAL RULES
BS EN 55020 : 2007	SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT
IEEE C37.235 : 2007	APPLICATION OF ROGOWSKI COILS USED FOR PROTECTIVE RELAYING PURPOSES
I.S. EN 62606:2013	GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES
CEI EN 62040-2 : 2006	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS
UNE EN 12405-3 : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
CSA ISO/IEC 18046-2 : 2013	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
CEI EN 60945 : 2003	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
CSA C61000-6-1 : 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
DIN EN 12405-3 : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
DIN EN ISO 20072 E : 2013	AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
CSA Z9919 : 2007 : R2012	MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
EN 50121-3-2 : 2016	RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS
CSA C22.2 No. 60601.2.2 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES
CSA C61000-4-6 : 2009 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
OIML R 134-1 : 2006	AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
I.S. EN 55016-2-3:2017	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
I.S. EN 60044-8:2002	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS