DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, Spanish, Castilian

Published date

06-08-2004

Publisher

International Electrotechnical Committee

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General notes on tests
5 Classification
   5.1 Classification according to the load
   5.2 Classification according to output voltage
6 Marking
   6.1 Mandatory marking
   6.2 Optional marking
7 Output voltage and current
   7.1 Open-circuit voltage
   7.2 Voltage during operation
   7.3 Voltage surges during switching and operation
   7.4 Voltage waveform
   7.5 Inrush current
8 Total circuit power
9 Circuit power factor
10 Supply current
11 Impedance at audio-frequencies
12 Operational tests for abnormal conditions
13 Endurance
Annex A (normative) Tests
Annex B (informative) A guide to quoting product life and
                      failure rate
Bibliography

This International Standard specifies performance requirements for electronic step-down convertors for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with operating frequencies deviating from the supply frequency, associated with tungsten halogen lamps as specified in IEC 60357 and other filament lamps.

Committee	TC 34/SC 34C
DevelopmentNote	To be read in conjunction with IEC 61347-1 and IEC 61347-2-2. (06/2004) Stability Date: 2020. (09/2017)
DocumentType	Standard
Pages	33
PublisherName	International Electrotechnical Committee
Status	Current
Supersedes	IEC 61047:1991 IEC 61047:1991/AMD1:1996 IEC 61047:1991+AMD1:1996+AMD2:2001 CSV IEC 61047:1991/AMD2:2001

Standards	Relationship
NF EN 61047 : 2005	Identical
NEN EN IEC 61047 : 2004	Identical
I.S. EN 61047:2004	Identical
PN EN 61047 : 2005	Identical
SANS 61047 : 2ED 2005(R2011)	Identical
VDE 0712-25 : 2005	Identical
DIN EN 61047 : 2005	Identical
BS EN 61047:2004	Identical
EN 61047:2004	Identical
SANS 61047:2005(R2023)	Identical
SN EN 61047 : 1992 AMD 2 2001	Identical
UNE-EN 61047:2005	Identical
CEI EN 61047 : 2005	Identical
NEN 11047 : 93 AMD 1 1996	Identical

PREN 12665 : DRAFT 2009	LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
NF EN 62442-3 : 2014	ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 3: CONTROLGEAR FOR HALOGEN LAMPS AND LED MODULES - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR
I.S. EN 61347-2-2:2012	LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS (IEC 61347-2-2:2011 (EQV))
CEI EN 61347-2-2 : 2012	LAMP CONTROLGEAR - PART 2-2: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC STEPDOWN CONVERTORS FOR FILAMENT LAMPS
I.S. EN 61347-1:2015	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
DIN EN 12665:2016-09 (Draft)	LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
BS EN 61347-1:2015	Lamp controlgear General and safety requirements
EN 61347-1:2015	Lamp controlgear - Part 1: General and safety requirements
EN 61347-2-2:2012	Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
BS EN 62442-3:2014	Energy performance of lamp controlgear Controlgear for halogen lamps and LED modules. Method of measurement to determine the efficiency of the controlgear
12/30261933 DC : 0	BS EN 62442-3 - ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 3: CONTROLGEAR FOR HALOGEN LAMPS AND LED MODULES - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR
I.S. EN 62442-3:2014	ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 3: CONTROLGEAR FOR HALOGEN LAMPS AND LED MODULES - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR
IEC 61046:1993	D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements
11/30252196 DC : 0	BS EN 61347-1:2008 + A2 - LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
DIN EN 61046 : 1995 AMD 1 1997	D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS - GENERAL AND SAFETY REQUIREMENTS
09/30185891 DC : 0	BS EN 12665 - LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
BS EN 61347-2-2:2012	Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-1 REDLINE : 3ED 2015	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
UNI EN 12665 : 2011	LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
UNE-EN 61347-1:2016	Lamp controlgear - Part 1: General and safety requirements
IEC 61347-2-2:2011	Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
16/30344770 DC : 0	BS EN 62442-3 ED1.0/A1 - ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 3: CONTROLGEAR FOR HALOGEN LAMPS AND LED MODULES - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR
CSA E61347.1 : 2003 : R2013	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 12665:2011	LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
UNE-EN 12665:2012	Light and lighting - Basic terms and criteria for specifying lighting requirements
BS EN 12665:2011	Light and lighting. Basic terms and criteria for specifying lighting requirements
IEC 61347-1:2015 RLV	Lamp controlgear - Part 1: General and safety requirements
UNE-EN 61347-2-2:2012	Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
CSA E61347.1 :2003	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
EN 62442-3:2014/A11:2017	ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 3: CONTROLGEAR FOR HALOGEN LAMPS AND LED MODULES - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR
EN 61046:1994/A1:1996	D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTERS FOR FILAMENT LAMPS - GENERAL AND SAFETY REQUIREMENTS

IEC 61547:2009	Equipment for general lighting purposes - EMC immunity requirements
IEC 61347-1:2015 RLV	Lamp controlgear - Part 1: General and safety requirements
IEC 60410:1973	Sampling plans and procedures for inspection by attributes
IEC 61347-2-2:2011	Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
AS/NZS 61347.2.2:2020	Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2011, MOD)
IEC 61000-3-2 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)

View more information

US$133.00

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

IEC 61047:2004

Current

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription