Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

10-18-2001

Publisher

International Electrotechnical Committee

FOREWORD
1 General data
   1.1 Recommended method of mounting
   1.2 Ratings and characteristics
   1.3 Normative references
   1.4 Marking
   1.5 IEC type designation
   1.6 Ordering information
2 Technical information
   2.1 Definitions
        2.1.1 Backplane male contact arrangement
   2.2 Survey of styles and variants
   2.3 Information on application
        2.3.1 Complete connectors (pairs)
        2.3.2 Fixed board connectors
        2.3.3 Free board connectors
        2.3.4 Accessories
        2.3.5 Shielding/grounding
        2.3.6 Basic type of termination
   2.4 Contact arrangements
        2.4.1 Fixed board connectors
        2.4.2 Free board connectors
3 Dimensional information
   3.1 General
   3.2 Isometric view and common features
        3.2.1 Common features
        3.2.2 Reference system
        3.2.3 Height dimensions
        3.2.4 Width dimensions
        3.2.5 Depth dimensions
   3.3 Engagement (mating) information
        3.3.1 Electrical engagement length
        3.3.2 Inclination
        3.3.3 Planarity
   3.4 Fixed board connectors
        3.4.1 Dimensions
        3.4.2 Terminations
   3.5 Free board connectors
        3.5.1 Dimensions
        3.5.2 Terminations
   3.6 Accessories
   3.7 Mounting information for fixed board connectors
        3.7.1 Hole pattern on panels
   3.8 Mounting information for free board connectors
        3.8.1 Hole pattern on printed boards
        3.8.2 Requirements for press-in tools
   3.9 Gauges
        3.9.1 Sizing gauges and retention force gauges
4 Characteristics
   4.1 Climatic category
   4.2 Electrical
        4.2.1 Creepage and clearance distances
        4.2.2 Voltage proof (applicable for PL1, 2, 3)
        4.2.3 Current-carrying capacity (applicable for
              PL1, 2, 3)
        4.2.4 Contact resistance
        4.2.5 Insulation resistance
   4.3 Mechanical
        4.3.1 Mechanical operation
        4.3.2 Insertion and withdrawal forces
        4.3.3 Contact retention in insert
        4.3.4 Static load, axial
        4.3.5 Vibration (sinusoidal)
5 Test schedule
   5.1 General
        5.1.1 Arrangement for contact resistance
              measurement
5.1.2 Arrangement for dynamic stress tests
        5.1.3 Arrangement for testing static load, axial
        5.1.4 Wiring arrangement for insulation
              resistance, voltage proof and polarization
              voltage during damp heat test
        5.1.5 Arrangement for flammability test
        5.1.6 Arrangement for measurement of the press-in
              connections (female connector)
        5.1.7 Planarity of mounted connectors
        5.1.8 Test board for fixed and free board
              connectors
   5.2 Test schedule tables
        5.2.1 Preliminary group P
        5.2.2 Group AP - Dynamic/climatic
        5.2.3 Group BP - Mechanical endurance
        5.2.4 Group CP - Moisture
        5.2.5 Group DP - Electrical load
        5.2.6 Group EP - Mechanical resistivity
        5.2.7 Group FP - Chemical fluids
        5.2.8 Group GP - Connections
6 Quality assessment procedures
   6.1 Qualification approval testing
        6.1.1 Method 1
        6.1.2 Method 2
   6.2 Quality conformance inspection
        6.2.1 Lot-by-lot tests
        6.2.2 Periodic tests
   6.3 Delayed delivery, re-inspection
Annex A (normative) Mechanical structures
Figures
Tables

This publication also bears the number QC 480301XX0001 which is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ).

Committee	TC 48/SC 48B
DevelopmentNote	Also numbered as BS EN 61076-4.100. (02/2002) Stability Date: 2020. (09/2017)
DocumentType	Standard
Pages	137
PublisherName	International Electrotechnical Committee
Status	Current
Supersedes	IEC 61076-4-100:1994

Standards	Relationship
IS/IEC 61076 : Part 4 : Sec 100 : 2001	Identical
NF EN 61076 4 100 : 2002	Identical
NEN EN IEC 61076-4-100 : 2002	Identical
I.S. EN 61076-4-100:2002	Identical
PN EN 61076-4-100 : 2002	Identical
SN EN 61076-4-100 : 1998	Identical
CEI EN 61076-4-100 : 2003	Identical
EN 61076-4-100:2001	Identical
DIN EN 61076-4-100:2002-10	Identical
UNE-EN 61076-4-100:2001	Identical

BS EN 60917-2-3:2006	Modular order for the development of mechanical structures for electronic equipment practices Sectional specification. Interface co-ordination dimensions for the 25 mm equipment practice. Extended detail specification. Dimensions for subracks, chassis, backplanes, front panels and plug-in units
CEI EN 61076-4-111 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 61076-4-103:1999	CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM
IEC 61076-4-111:2002	Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 61076-4-108:2002	Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60917-2-3 : 2006	Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units
EN 61076-4-103:1999	Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
EN 50377-11-1:2008	Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
EN 61076-4-102:1997	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
EN 61076-4-110:2002	Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
BS EN 61076-4-111:2002	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 61076-4-102:1997	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
I.S. EN 61076-4-111:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
CEI EN 61076-4-110 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
BS EN 61076-4-103:1999	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
BS EN 50377-11-1:2008	Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
05/30134095 DC : DRAFT MAY 2005	IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
BS EN 61076-4-110:2002	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
NF EN 50377-11-1 : 2008	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
CEI EN 61076-4-108 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 61076-4-102:1998	CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
CEI EN 60917-2-3 : 2007	MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES - PART 2-3: SECTIONAL SPECIFICATION - INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE - EXTENDED DETAIL SPECIFICATION - DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS
IEC 60917-2-3:2006	Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units
CEI EN 61076-4-103 : 2001	CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM
NF EN 61076 4 102 : 1998	CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
05/30135124 DC : DRAFT JUN 2005	IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
I.S. EN 50377-11-1:2008	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
BS EN 61076-4-108:2002	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
I.S. EN 61076-4-110:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
IEC 61076-4-108:2002	Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
IEC 61076-4-102:1997	Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917
10/30219087 DC : 0	BS EN 61587-1 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 1: ENVIRONMENTAL REQUIREMENTS AND TESTS, SAFETY ASPECTS FOR FOR CABINETS, RACKS, SUBRACKS AND CHASSIS
CEI EN 61076-4-102 : 1998	CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
CEI EN 50377-11-1 : 2009	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
I.S. EN 61076-4-108:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
EN 61076-4-111:2002	Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1

IEC 61076-1:2006	Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 60512-8:1993	Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
IEC 60068-1:2013	Environmental testing - Part 1: General and guidance
IEC 60512-6:1984	Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
IEC 60512-7:1993	Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
IEC 60352-1:1997	Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
IEC 60410:1973	Sampling plans and procedures for inspection by attributes
IEC 60352-5:2012	Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
IEC 61076-4:1995	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
IEC 60512-4:1976	Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests
IEC 61076-4-102:1997	Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917
IEC 60917-2-2:1994	Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units
IEC 60512-9:1992	Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
IEC 60512-5:1992	Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
IEC 60512-1:2001	Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60326-3:1991	Printed boards - Part 3: Design and use of printed boards
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60512-3:1976	Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests

View more information

US$400.00

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

IEC 61076-4-100:2001

Current

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription