• There are no items in your cart

IEC 61281-1:2017

Current
Current

The latest, up-to-date edition.

Fibre optic communication subsystems - Part 1: Generic specification
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

12-15-2017

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and acronyms
5 Subsystem characteristics
Bibliography

IEC 61281-1:2017 is a generic specification for fibre optic communication subsystems (FOCSs). The parameters defined herein form a specifiable minimum set of specifications that are common to all fibre optic subsystems. Additional parameters can be used depending on the particular application and technology. Those additional parameters will be specified in the relevant documents, as appropriate. Each specified parameter is measured using one of the test procedures. The use of these parameters for system design is given in design guides. This second edition cancels and replaces the first edition published in 1999. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: addition of new definitions.
Keywords: fibre optic communication subsystems (FOCSs)

Committee
TC 86/SC 86C
DevelopmentNote
Stability Date: 2021. (12/2017)
DocumentType
Standard
Pages
80
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

CEI EN IEC 60728-106:2023 Cable networks for television signals, sound signals and interactive services Part 106: Optical equipment for systems loaded with digital channels only

IEC TR 61282-12:2016 Fibre optic communication system design guides - Part 12: In-band optical signal-to-noise ratio (OSNR)
IEC 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
IEC TR 61282-5:2002 Fibre optic communication system design guides - Part 5: Accommodation and compensation of dispersion
IEC 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
IEC 61280-2-11:2006 Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
IEC 61280-2-10:2005 Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
IEC 61274-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
IEC 60050-731:1991 International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication
IEC 61280-1-3:2010 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement
IEC 61290-10-5:2014 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
IEC 60793-2-10:2017 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
IEC 60793-1-41:2010 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
IEC 61290-3-3:2013 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
IEC 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
IEC 61290-11-1:2008 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
IEC TR 61282-6:2003 Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems
IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
IEC 61291-2:2016 Optical amplifiers - Part 2: Single channel applications - Performance specification template
IEC 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
IEC 61280-2-9:2009 Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
IEC 60869-1:2012 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
IEC 61290-6-1:1998 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 60794-1-1:2015 Optical fibre cables - Part 1-1: Generic specification - General
IEC 61291-4:2011 Optical amplifiers - Part 4: Multichannel applications - Performance specification template
IEC TR 61282-15:2017 Fibre optic communication system design guides - Part 15: Cable plant and link - Testing multi-fibre optic cable plant terminated with MPO connectors
IEC TR 61282-3:2006 Fibre optic communication system design guides - Part 3: Calculation of link polarization mode dispersion
IEC 61280-1-1:2013 Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
IEC 61280-2-3:2009 Fibre optic communication subsystem tets procedures - Part 2-3: Digital systems - Jitter and wander measurements
IEC 61280-2-12:2014 Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment
IEC 61290-5-3:2002 Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer
IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
IEC 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
IEC TR 61931:1998 Fibre optic - Terminology
IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
IEC 61280-4-1:2009 Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement
IEC 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
IEC 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
IEC 61703:2016 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
IEC TR 61282-7:2003 Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion
IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
IEC 61280-2-8:2003 Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements
IEC 61073-1:2009 Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification
IEC 61290-1:2014 Optical amplifiers - Test methods - Part 1: Power and gain parameters
IEC 61291-1:2012 Optical amplifiers - Part 1: Generic specification
IEC TR 61282-4:2013 Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects
IEC 60793-2-50:2015 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
IEC 61280-4-4:2017 Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
IEC 61290-3:2008 Optical amplifiers - Test methods - Part 3: Noise figure parameters
IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-11-2:2005 Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
IEC 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
IEC 61280-2-1:2010 Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement
IEC 62614:2010 Fibre optics - Launch condition requirements for measuring multimode attenuation
IEC 62149-1:2011 Fibre optic active components and devices - Performance standards - Part 1: General and guidance
IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
IEC TS 62538:2008 Categorization of optical devices
IEC 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
IEC TR 61282-8:2006 Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data
IEC TR 61282-9:2016 Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory
IEC 61290-10-3:2002 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
IEC 61280-1-4:2009 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
IEC 60876-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
IEC TR 61282-13:2014 Fibre optic communication system design guides - Part 13: Guidance on in-service PMD and CD characterization of fibre optic links

View more information
US$273.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.