• There are no items in your cart

IEC 61290-1-1:2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

09-12-2022

Language(s)

English, English - French

Published date

05-07-2015

FOREWORD
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Apparatus
5 Test sample
6 Procedure
7 Calculation
8 Test results
Bibliography

IEC 61290-1-1:2015 applies to all commercially available optical amplifiers (OAs) and optically amplified modules. It applies to OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductor OAs (SOAs) and planar optical waveguide amplifiers (POWAs). The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the optical spectrum analyzer test method, of the following OA parameters, as defined in IEC 61291-1:
- nominal output signal power;
- gain;
- polarization-dependent gain;
- maximum output signal power;
- maximum total output power. The object of this standard is specifically directed to single-channel amplifiers. For multichannel amplifiers, one should refer to the IEC 61290-10 series. This third edition cancels and replaces the second edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: updates on the characteristics of measurement apparatus and revised list of addressed optical amplifier parameters.Keywords: optical amplifiers, optical spectrum analyzer test, single-channel amplifiers

Committee
TC 86/SC 86C
DevelopmentNote
Supersedes IEC 61290-2-1 (08/2006) To be read in conjunction with IEC 61290-1 and IEC 61291-1. Stability Date: 2020. (05/2015)
DocumentType
Standard
Pages
12
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

CEI EN 61290-10-4 : 2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER
09/30205272 DC : 0 BS EN 61290-4-2 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD
06/30154856 DC : DRAFT AUG 2006 EN 61291-2 - OPTICAL AMPLIFIERS - PART 2: DIGITAL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE
09/30205262 DC : 0 BS EN 61290-4-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD
07/30170378 DC : DRAFT AUG 2007 BS EN 61290-10-1 - OPTICAL AMPLIFIER TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
I.S. EN IEC 61291-1:2018 OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION
EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
EN 61290-1:2015 Optical amplifiers - Test methods - Part 1: Power and gain parameters
13/30285534 DC : 0 BS EN 61290-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1: OPTICAL POWER AND GAIN PARAMETERS
BS EN 61291-1:2012 Optical amplifiers Generic specification
CEI EN 61291-1 : 2013 OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION
98/261559 DC : DRAFT MAY 1998 IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD
BS EN 61281-1:1999 Fibre optic communication subsystems Generic specification
I.S. EN IEC 61281-1:2018 FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION
I.S. EN 60728-6:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
I.S. EN 61290-10-1:2009 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
CEI EN 60728-6 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
BS EN 61290-10-1:2009 Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
EN IEC 61281-1:2018 Fibre optic communication subsystems - Part 1: Generic specification
BS EN IEC 61281-1:2018 Fibre optic communication subsystems Generic specification
DD IEC/PAS 61290-3-1:2002 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer
I.S. EN 61290-1-3:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD
IEC PAS 61290-3-1:2002 Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer
IEC 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
CEI EN 61290-4-1 : 2012 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD
BS EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology
BS EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services Optical equipment
BS EN IEC 61291-1:2018 Optical amplifiers Generic specification
IEC 61291-1:2018 Optical amplifiers - Part 1: Generic specification
BS EN 61290-4-2:2011 Optical amplifiers. Test methods Gain transient parameters. Broadband source method
BS EN 61290-1:2015 Optical amplifiers. Test methods Power and gain parameters
PD IEC/TR 61292-7:2011 Optical amplifiers Four wave mixing effect in optical amplifiers
BS EN 61290-10-4:2007 Optical amplifiers. Test methods Multichannel parameters. Interpolated source subtraction method using an optical spectrum analyzer
11/30249050 DC : 0 BS EN 61291-1 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION
BS EN 61290-3-1:2003 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method
EN IEC 61291-1:2018 Optical amplifiers - Part 1: Generic specification
I.S. EN 60728-14:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY
I.S. EN 61290-4-2:2011 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD (IEC 61290-4-2:2011 (EQV))
I.S. EN 61290-3-1:2003 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
IEC 61281-1:2017 Fibre optic communication subsystems - Part 1: Generic specification
IEC 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
IEC 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
IEC 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
IEC 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
BS EN 61290-1-3:2015 Optical amplifiers. Test methods Power and gain parameters. Optical power meter method
CEI EN 61290-10-1 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
I.S. EN 61291-1:2012 OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION (IEC 61291-1:2012 (EQV))
I.S. EN 61290-10-4:2007 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER
I.S. EN 61290-1:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAINPARAMETERS
CEI EN 61290-4-2 : 2012 OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD
IEC TR 61292-7:2011 Optical amplifiers - Part 7: Four wave mixing effect in optical amplifiers
IEC 61290-1:2014 Optical amplifiers - Test methods - Part 1: Power and gain parameters
EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
EN 61291-1:2012 Optical amplifiers - Part 1: Generic specification
EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer

IEC 61290-1:2014 Optical amplifiers - Test methods - Part 1: Power and gain parameters
IEC 61291-1:2012 Optical amplifiers - Part 1: Generic specification
IEC 60793-2-50:2015 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres

View more information
US$93.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.