IEC 61298-2 : 2.0

Current

Current The latest, up-to-date edition.

PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 2: TESTS UNDER REFERENCE CONDITIONS

Publisher: International Electrotechnical Committee

Published:

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Accuracy related factors
  4.1 Test procedures and precautions
      4.1.1 Selection of ranges for test
      4.1.2 Preconditioning cycles
      4.1.3 Number of measurement cycles and test points
      4.1.4 Additional tests where digital inputs and outputs
            are provided
      4.1.5 Measurement procedure
      4.1.6 Processing of the measured values
      4.1.7 Determination of accuracy related factors
      4.1.8 Presentation of the results
  4.2 Specific testing procedures and precautions for the
      determination of dead band
      4.2.1 Selection of ranges for test and preconditioning
      4.2.2 Measurement procedure
      4.2.3 Presentation of the results
5 Dynamic behaviour
  5.1 General considerations
  5.2 General testing procedures and precautions
  5.3 Frequency response
  5.4 Step response
6 Functional characteristic
  6.1 General
  6.2 Input resistance of an electrical device
  6.3 Insulation of electrical devices
      6.3.1 General considerations
      6.3.2 Insulation resistance
      6.3.3 Dielectric strength
  6.4 Power consumption
      6.4.1 Electrical power consumption
      6.4.2 Air consumption
  6.5 Output ripple of a device with an electrical d.c. output
  6.6 Air flow characteristics of a pneumatic device
      6.6.1 Initial setting up
      6.6.2 Delivered flow Q[1]
      6.6.3 Exhausted flow Q[2]
      6.6.4 Data presentation
  6.7 Limits of adjustments of lower range value and span
  6.8 Switching differential
7 Drift
  7.1 Start-up drift
  7.2 Long-term drift

Abstract - (Show below) - (Hide below)

Specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process measurement and control devices.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 65

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN 61298-2 : 2009	Identical
SAC GB/T 18271-2 : 2000	Identical
NEN 11298-2 : 1995	Identical
NEN EN IEC 61298-2 : 2008	Identical
SAC GB/T 18271-1 : 2000	Identical
BS EN 61298-2 : 2008	Identical
SN EN 61298-2 : 1995	Identical
SN EN 61298-2:2008	Identical
DIN EN 61298-2 : 2009	Identical
PN EN 61298-2 : 2009	Identical
CEI EN 61298-2 : 2011	Identical
I.S. EN 61298-2:2008	Identical
GOST R IEC 61298-2 : 2015	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 60873-1:2004	ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
17/30342922 DC : 0	BS EN 61987-92 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 92: LISTS OF PROPERTIES (LOP) OF MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE - ASPECT LOPS
CEI EN 60873-1 : 2005	ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIALPROCESS SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
08/30176946 DC : DRAFT JAN 2008	BS EN 60770-1 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
13/30287730 DC : 0	BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
BS EN 61069-4 : 2016	INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
BS EN 60770-2 : 2010	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
CEI 45-60 : 2009	NUCLEAR POWER PLANTS - ELECTRICAL EQUIPMENT OF THE SAFETY SYSTEM - QUALIFICATION
14/30295856 DC : 0	BS EN 61003-1 ED. 3.0 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
16/30331802 DC : 0	BS EN 62887 ED 1.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION SYSTEMS IMPORTANT TO SAFETY - PRESSURE TRANSMITTERS: CHARACTERISTICS AND TEST METHODS
BS EN 61298-1 : 2008	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS
I.S. EN 61987-13:2016	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 13: LISTS OF PROPERTIES (LOP) FOR PRESSURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
BS EN 61987-13 : 2016	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 13: LISTS OF PROPERTIES (LOP) FOR PRESSURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
BS IEC 60780 : 1998	NUCLEAR POWER PLANTS - ELECTRICAL EQUIPMENT OF THE SAFETY SYSTEM - QUALIFICATION
CEI EN 60770-2 : 2014	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
02/203203 DC : DRAFT FEB 2002	IEC 60873. ED.2 - METHODS OF EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS
EN 61987-16 : 2017	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LISTS OF PROPERTIES (LOPS) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE (IEC 61987-16:2016)
CEI EN 61003-2 : 2011	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
I.S. EN 61514-2:2013	INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV))
08/30178660 DC : DRAFT FEB 2008	BS EN 60546-1 - CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
BS EN 61514-2 : 2013	INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY
15/30318557 DC : 0	BS EN 61987-14 ED. 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 14: LISTS OF PROPERTIES (LOP) FOR TEMPERATURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
DIN 16086 : 2006	ELECTRICAL PRESSURE MEASURING INSTRUMENTS - PRESSURE TRANSMITTERS, PRESSURE MEASURING INSTRUMENTS - CONCEPTS, SPECIFICATIONS ON DATA SHEETS
NF EN 60770-1 : 2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
14/30295852 DC : 0	BS EN 60534-2-3 ED. 3.0 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY - TEST PROCEDURES
CEI EN 61298-1 : 2011	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS
NF EN 61003-1 : 2016	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE
BS EN 60770-3 : 2014	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
98/262470 DC : DRAFT JUL 1998	IEC 61987 ED. 1 - TERMS AND STRUCTURES OF MEASURING EQUIPMENT
15/30332015 DC : 0	BS EN 61987-16 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LIST OF PROPERTIES (LOP) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
IEC TS 62098 : 1ED 2000	EVALUATION METHODS FOR MICROPROCESSOR - BASED INSTRUMENTS
BS EN 61987-16 : 2017	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LISTS OF PROPERTIES (LOPS) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
BS EN 61003-1 : 2016	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE
BS EN 61003-2 : 2016	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI POSITION OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
CEI EN 61003-1 : 2005	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE
09/30196098 DC : 0	BS EN 61003-2 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO OR MULTI-STATE OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
14/30298027 DC : 0	BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
BS EN 61987-12 : 2016	INDUSTRIAL- PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 12: LISTS OF PROPERTIES (LOPS) FOR FLOW MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
02/202899 DC : DRAFT FEB 2002	IEC 61003-1. ED.3 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTISTATE OUTPUTS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
BS EN 60873-1 : 2004	ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
BS EN 60534-2-3 : 2016	INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY - TEST PROCEDURES
I.S. EN 61298-1:2008	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS
08/30176950 DC : DRAFT JAN 2008	BS EN 60770-2 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
DIN EN 60534-2-3 : 2014	INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY - TEST PROCEDURES (IEC 60534-2-3:2015)
NF EN 60770-2 : 2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
NF EN 60770-3 : 2014	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
I.S. EN 61003-2:2016	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
BS EN 61298-3 : 2008	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES
I.S. EN 60534-2-3:2016	INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES
I.S. EN 60770-2:2010	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
NF EN 61003-2 : 2016	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
I.S. EN 61298-3:2008	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES
I.S. EN 61069-4:2016	INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
I.S. EN 60770-1:2011	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
CEI EN 60770-1 : 2014	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
I.S. EN 60770-3:2014	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
BS EN 60770-1 : 1999	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
I.S. EN 61987-12:2016	INDUSTRIAL- PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 12: LISTS OF PROPERTIES (LOPS) FOR FLOW MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
IEC 60770-3 : 2.0	TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
I.S. EN 61987-16:2017	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LISTS OF PROPERTIES (LOPS) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
IEC 61987-16 : 1ED 2016	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LISTS OF PROPERTIES (LOPS) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
I.S. EN 61987-14:2016	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 14: LISTS OF PROPERTIES (LOP) FOR TEMPERATURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
BS EN 61987-14 : 2016	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 14: LISTS OF PROPERTIES (LOP) FOR TEMPERATURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
CEI EN 61298-3 : 2011	PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES
API 551 : 2016	PROCESS MEASUREMENT
IEC 60780 : 2.0	NUCLEAR POWER PLANTS - ELECTRICAL EQUIPMENT OF THE SAFETY SYSTEM - QUALIFICATION
IEC 61987-92 : 1ED 2018	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 92: LISTS OF PROPERTIES (LOP) OF MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE - ASPECT LOPS
I.S. EN 61003-1:2016	INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE
IEC PAS 61987-1 : 1.0	INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT

Add To Cart

Product Format

Quantity

add to cart

IEC 61298-2 : 2.0

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?