• There are no items in your cart

IEC 62012-1:2002

Current
Current

The latest, up-to-date edition.

Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, English - French

Published date

06-24-2002

FOREWORD
INTRODUCTION
1 General
   1.1 Scope
   1.2 Normative references
   1.3 Definitions
   1.4 Environmental considerations
2 Materials and cable construction
   2.1 General remarks
   2.2 Cable construction
   2.3 Identification
   2.4 Finished cable
3 Test methods
   3.1 General remarks
   3.2 Electrical tests
   3.3 Mechanical and dimensional measurement tests
   3.4 Environmental tests
   3.5 Temperature tests
   3.6 Chemical tests
   3.7 Radiation tests
Annex A (normative) Horizontal integrated fire-test method
   A.1 Definitions, symbols and abbreviations
   A.2 Test environment
   A.3 Test apparatus
   A.4 Test specimens
   A.5 Calibration and maintenance of test equipment
   A.6 Test specimen preparation
   A.7 Test procedures
   A.8 Post-test clean-up and inspection
   A.9 Calculations
   A.10 Report
Annex B (normative) Method for determining suitability of
        oxygen analysers for making heat release measurements
   B.1 General
   B.2 Procedure
   B.3 Additional precautions
Annex C (informative) Material information list
   C.1 Analyser
   C.2 Fire-test chamber
   C.3 Firebrick
   C.4 Inside glass panes
   C.5 Lamp
   C.6 Recording device
   C.7 Bi-directional probe
   C.8 Neutral density filters
   C.9 Gas calorimeter
   C.10 Standard insulated conductor (calibration cable)
Annex D (informative) Brick sizes
Bibliography

specifies the definitions and test methods, when used in harsh environment, of symmetrical pair and quad cables used in digital communication systems such as ISDN, local area networks and data communication systems. gives guidance concerning the design and testing of these cables.

Committee
TC 46/SC 46C
DevelopmentNote
Stability Date: 2017. (10/2012)
DocumentType
Standard
Pages
51
PublisherName
International Electrotechnical Committee
Status
Current

Standards Relationship
NF EN 62012-1 : 2004 Identical
NEN EN IEC 62012-1 : 2002 Identical
I.S. EN 62012-1:2002 Identical
PN EN 62012-1 : 2003 Identical
UNE-EN 62012-1:2002 Identical
BS EN 62012-1:2002 Identical
CEI EN 62012-1 : 2003 Identical
EN 62012-1:2002 Identical
DIN EN 62012-1:2003-06 Identical

BS EN 50602:2014 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Unscreened straight patch cords and straight work area cords for class E applications. Detail specification
CEI EN 50603 : 2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
BS EN 50599:2014 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
I.S. EN 61935-2-20:2009 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH SERIES EN 50173 - PART 2-20: PATCH CORDS AND WORK AREA CORDS - BLANK DETAIL SPECIFICATION FOR CLASS D APPLICATIONS
NF EN 50601 : 2015 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
CEI EN 50602 : 2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
ISO/IEC 24702:2006 Information technology Generic cabling Industrial premises
UNE-EN 50290-4-1:2016 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
EN 50603:2014 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class E applications - Detail specification
EN 50601:2014 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class D applications - Detail specification
EN 50602:2014 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Unscreened straight patch cords and straight work area cords for class E applications - Detail specification
CEI EN 50601 : 2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
BS IEC 61935-2-23:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Cord and work area cord category 7. Blank detail specification
I.S. EN 50601:2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
PD IEC/TR 62222:2012 Fire performance of communication cables installed in buildings
I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
CEI EN 61935-2-20 : 2011 TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH SERIES EN 50173 - PART 2-20: PATCH CORDS AND WORK AREA CORDS - BLANK DETAIL SPECIFICATION FOR CLASS D APPLICATIONS
NF EN 50602 : 2015 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
BS EN 50601:2014 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
05/30131385 DC : DRAFT MAR 2005 IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION
BS EN 50290-4-1:2014 Communication cables General considerations for the use of cables. Environmental conditions and safety aspects
BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
I.S. EN 50603:2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
NF EN 50603 : 2015 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
IEC 61935-2-25:2015 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-25: Work area cord with M12 4 poles connectors - Blank detail specification
IEC 62255-1:2003 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification
I.S. EN 50290-4-1:2014 COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS
IEC 61935-2-20:2008 Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications
IEC 61935-2-23:2015 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7 - Blank detail specification
BS EN 61935-2-20:2009 Testing of balanced communication cabling in accordance with series EN 50173 Patch cords and work area cords. Blank detail specification for class D applications
BS EN 50603:2014 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class E applications. Detail specification
CEI EN 50599 : 2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 50599:2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
I.S. EN 50602:2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - UNSCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS E APPLICATIONS - DETAIL SPECIFICATION
IEC 61935-2-24:2015 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7<sub>A</sub> - Blank detail specification
IEC TR 62222:2012 Fire performance of communication cables installed in buildings
BS IEC 61935-2-24:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Cord and work area cord category 7A. Blank detail specification
BS IEC 61935-2-25:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Work area with M12 4 poles connectors. Blank detail specification
NF EN 50599 : 2014 GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH EN 50173-4 - SCREENED STRAIGHT PATCH CORDS AND STRAIGHT WORK AREA CORDS FOR CLASS D APPLICATIONS - DETAIL SPECIFICATION
IEC 61156-1:2007+AMD1:2009 CSV Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification
EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
EN 50599:2014 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 - Screened straight patch cords and straight work area cords for class D applications - Detail specification
EN 61935-2-20:2009 Testing of balanced communication cabling in accordance with series EN 50173 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications

IEC 60811-3-1:1985 Common test methods for insulating and sheathing materials ofelectric cables - Part 3: Methods specific to PVC compounds -Section One: Pressure test at high temperature - Tests forresistance to cracking
IEC 60028:1925 International standard of resistance for copper
IEC 60811-4-1:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
IEC 60189-1:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
IEC 60794-1:1996 Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1)
IEC 60304:1982 Standard colours for insulation for low-frequency cables and wires
IEC 60332-1:1993 Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable
IEC 60050-722:1992 International Electrotechnical Vocabulary (IEV) - Part 722: Telephony
ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
IEC 60050-704:1993 International Electrotechnical Vocabulary (IEV) - Part 704: Transmission
IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
IEC 60050-701:1988 International Electrotechnical Vocabulary (IEV) - Part 701: Telecommunications, channels and networks
IEC TR 60344:2007 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide
IEC 60811-4-2:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation
IEC 60811-1-1:1993+AMD1:2001 CSV Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
IEC 60811-1-3:1993+AMD1:2001 CSV Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application -Methods for determining the density - Water absorption tests - Shrinkage test
IEC 60811-1-4:1985 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature
IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
IEC 60332-2:1989 Tests on electric cables under fire conditions. Part 2: Test on a single small vertical insulated copper wire or cable
IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus

View more information
US$348.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.