IEC 62132-4:2006
Current
Current
The latest, up-to-date edition.
Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
02-21-2006
Publisher
Describes a method to measure the immunity of integrated circuits (IC) in the presence of conducted RF disturbances, e.g. resulting from radiated RF disturbances. This method guarantees a high degree of repeatability and correlation of immunity measurements.This standard establishes a common base for the evaluation of semiconductor devices used in equipment functioning in an environment subject to unwanted radio frequency electromagnetic waves.
| Committee |
TC 47/SC 47A
|
| DevelopmentNote |
Stability Date: 2015. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
49
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN IEC 62132-4 : 2006 | Identical |
| I.S. EN 62132-4:2006 | Identical |
| PN EN 62132-4 : 2009 | Identical |
| SN EN 62132-4 : 2006 | Identical |
| UNE-EN 62132-4:2006 | Identical |
| BS EN 62132-4:2006 | Identical |
| CEI EN 62132-4 : 2006 | Identical |
| EN 62132-4:2006 | Identical |
| NF EN 62132-4 : 2006 | Identical |
| DIN EN 62132-4:2006-10 | Identical |
| BS EN 62228-2:2017 | Integrated circuits. EMC evaluation of transceivers LIN transceivers |
| EN 62433-4:2016 | EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI) |
| 10/30209944 DC : 0 | BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| CEI EN 62228-2 : 1ED 2017 | INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS |
| I.S. EN 62228-2:2017 | INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS |
| CEI EN 62215-3 : 2014 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| EN IEC 62969-1:2018 | Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors |
| 17/30350017 DC : 0 | BS EN 62228-1 - INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
| 14/30310470 DC : 0 | BS EN 62228-2 - INTEGRATED CIRCUITS - EMC EVALUATION OF LIN TRANSCEIVERS |
| IEC TS 62215-2:2007 | Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method |
| 14/30310474 DC : 0 | BS EN 62433-4 ED 1.0 - EMC IC MODELLING - PART 4: MODELS OF INTEGRATED CIRCUITS FOR RF IMMUNITY BEHAVIOURAL SIMULATION - CONDUCTED IMMUNITY MODELLING (ICIM-CI) |
| BS EN 62132-1:2016 | Integrated circuits. Measurement of electromagnetic immunity General conditions and definitions |
| I.S. EN 62215-3:2013 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD (IEC 62215-3:2013 (EQV)) |
| I.S. EN 62132-1:2016 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
| IEC TS 62228:2007 | Integrated circuits - EMC evaluation of CAN transceivers |
| IEC 62969-1:2017 | Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors |
| BS EN 62433-4:2016 | EMC IC modelling Models of integrated circuits for RF immunity behavioural simulation. Conducted immunity modelling (ICIM-CI) |
| DD IEC/TS 62215-2:2007 | Integrated circuits. Measurement of impulse immunity Synchronous transient injection method |
| NF EN 62215-3 : 2014 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| 05/30137850 DC : DRAFT AUG 2005 | IEC 62215-2 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: IMPULSE INJECTION METHOD |
| 12/30268333 DC : 0 | BS EN 62132-1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| IEC 62228-1:2018 | Integrated circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions |
| IEC 62215-3:2013 | Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
| IEC 62132-1:2015 | Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
| CEI EN 62433-4 : 1ED 2017 | EMC IC MODELLING - PART 4: MODELS OF INTEGRATED CIRCUITS FOR RF IMMUNITY BEHAVIOURAL SIMULATION - CONDUCTED IMMUNITY MODELLING (ICIM-CI) |
| BS EN 62215-3:2013 | Integrated circuits. Measurement of impulse immunity Non-synchronous transient injection method |
| 16/30336986 DC : 0 | BS EN 62969-1 - SEMICONDUCTOR DEVICES - SEMICONDUCTOR INTERFACE FOR AUTOMOTIVE VEHICLES - PART 1: GENERAL REQUIREMENTS OF POWER INTERFACE FOR AUTOMOTIVE VEHICLE SENSORS |
| DD IEC/TS 62228:2007 | Integrated circuits. EMC evaluation of CAN transceivers |
| ISO/IEC/IEEE 8802-3:2017 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet |
| IEC 62228-2:2016 | Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers |
| IEC 62433-4:2016 | EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI) |
| EN 62132-1:2016 | Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
| EN 62228-2:2017 | Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers |
| EN 62215-3:2013 | Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| ISO 11451-3:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 3: On-board transmitter simulation |
| IEC 62132-1:2015 | Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
| IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| IEC 61967-4:2002+AMD1:2006 CSV | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| ISO 11451-2:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources |
| ISO 11452-7:2003 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection |
| ISO 11451-4:2013 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) |
| ISO 11451-1:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
US$174.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.