• There are no items in your cart

IEC 62282-4-101:2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

08-11-2022

Language(s)

English - French

Published date

08-12-2014

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Construction requirements for safety
5 Performance requirements for safety and type tests
6 Routine tests
7 Markings
8 Instructions
Annex A (informative) - Comparison of pressure terms
Bibliography

IEC 62282-4-101:2014 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks. This standard is limited to electrically powered industrial trucks and is applicable to material-handling equipment, e.g. forklifts. It applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks.

Committee
TC 105
DevelopmentNote
Stability date: 2018. (08/2014)
DocumentType
Standard
Pages
104
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy

17/30293011 DC : DRAFT JUL 2017 BS ISO 19881 - GASEOUS HYDROGEN - LAND VEHICLE FUEL CONTAINERS
17/30293100 DC : 0 BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS
EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
BS EN 62282-4-102:2017 Fuel cell technologies Fuel cell power systems for industrial electric trucks. Performance test methods
I.S. EN 62282-4-102:2017 FUEL CELL TECHNOLOGIES - PART 4-102: FUEL CELL POWER SYSTEMS FOR INDUSTRIAL ELECTRIC TRUCKS - PERFORMANCE TEST METHODS
IEC 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods

ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems
ISO 2440:1997 Flexible and rigid cellular polymeric materials Accelerated ageing tests
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60695-11-4:2011 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
SAE J 517 : 2016 HYDRAULIC HOSE
ISO 15649:2001 Petroleum and natural gas industries — Piping
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
UL 2267 : 2 FUEL CELL POWER SYSTEMS FOR INSTALLATION IN INDUSTRIAL ELECTRIC TRUCKS
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
ASME B31.1 : 2016 POWER PIPING
IEC 60695-1-30:2017 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
ISO 4675:2017 Rubber- or plastics-coated fabrics — Low-temperature bend test
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
NFPA 505 : 2013 FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS
IEC TS 62282-1:2013 Fuel cell technologies - Part 1: Terminology
IEC 60227-3:1993+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
UL 1450:4ED 2010-05 Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 3691-1:2011 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
ASME B31.3:2016 PROCESS PIPING
ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
IEC 60335-2-80:2015 RLV Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
ISO 16010:2005 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
IEC 62103:2003 Electronic equipment for use in power installations
IEC 60079-29-4:2009 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases
IEC 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
ISO 16017-1:2000 Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling
IEC 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
ISO 1798:2008 Flexible cellular polymeric materials Determination of tensile strength and elongation at break
SAE J 2600 : 2015 Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br>
ISO 13226:2011 Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
UL 79:10ED 2016-04 Power-Operated Pumps for Petroleum Dispensing Products
ISO 7866:2012 Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
ISO/TS 15869:2009 Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks
UL 2075:2ED 2013-03 Gas and Vapor Detectors and Sensors
ISO/TS 14687-2:2008 Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles
CSA 6.10 : 2015 CONNECTORS FOR GAS APPLIANCES
ISO 15500-12:2015 Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV)
ISO 10380:2012 Pipework — Corrugated metal hoses and hose assemblies
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
ISO 4038:1996 Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings
ISA MC96.1 : 1982 TEMPERATURE MEASUREMENT THERMOCOUPLES
ISO 16111:2008 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
ISO 180:2000 Plastics Determination of Izod impact strength
SAE J 1739 : 2009 POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 23551-1:2012 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
ISO 3996:1995 Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
ISO 1419:1995 Rubber- or plastics-coated fabrics Accelerated-ageing tests
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
ISO 11114-4:2017 Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
ISO 17268:2012 Gaseous hydrogen land vehicle refuelling connection devices
ISO 16000-3:2011 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method
ISO 21927-3:2006 Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators
UL 429:7ED 2013-11 Electrically Operated Valves
ISO 10806:2003 Pipework Fittings for corrugated metal hoses
ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
ISO 2626:1973 Copper Hydrogen embrittlement test
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 62133 : 2.0EN+(REDLINE+VERSION) SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
UL 778:6ED 2016-07 Motor-Operated Water Pumps
ISO 4080:2009 Rubber and plastics hoses and hose assemblies Determination of permeability to gas
ISO 9809-1:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
SAE J 2719 : 2005(R2015) HYDROGEN FUEL QUALITY FOR FUEL CELL VEHICLES
IEC 61204-7:2016 EXV LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements
IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60695-11-5:2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ANSI Z21.24 : 2015 CONNECTORS FOR GAS APPLIANCES
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60584-1:2013 Thermocouples - Part 1: EMF specifications and tolerances
ISO 16000-6:2011 Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
IEC 60227-5:2011 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
IEC 60335-2-41:2012 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements

View more information
US$348.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.