IEC 62430 : 1.0

ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS

International Electrotechnical Committee

Current

Add To Cart

Product Format

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Fundamentals of environmentally conscious
  design (ECD)
  4.1 General
  4.2 Life cycle thinking
  4.3 Regulatory and stakeholders' requirements
  4.4 Integration into management system
5 Environmentally conscious design process
  (ECD process)
  5.1 General
  5.2 Analysis of regulatory and stakeholders'
      environmental requirements
  5.3 Identification and evaluation of environmental
      aspects and corresponding impacts
  5.4 Design and development
  5.5 Review and continual improvement
  5.6 Information sharing for ECD
Annex A (informative) Fundamentals of environmentally
        conscious design
Annex B (informative) Elaboration of environmentally
        conscious design process (ECD process)
Annex C (informative) Examples categories of tools
Bibliography

Abstract - (Show below) - (Hide below)

Describes requirements and procedures to integrate environmental aspects into design and development processes of electrical and electronic products, including combination of products, and the materials and components of which they are composed.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 111

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
EN 62430 : 2009	Identical
VDE 0042-2 : 2010	Identical
NF EN 62430 : 2009	Identical
NBR IEC 62430 : 2010	Identical
I.S. EN 62430 : 2009	Identical
NEMA IEC 62430 : 2010	Identical
NEN EN IEC 62430 : 2009	Identical
DS EN 62430 : 2009	Identical
UNE EN 62430 : 2009	Identical
CEI EN 62430 : 2011	Identical
DIN EN 62430 : 2010	Identical
BS EN 62430 : 2009	Identical
NEMA IEC 62430 : 2010	Identical
BS EN 62430 : 2009	Identical
NEN EN IEC 62430 : 2009	Identical
CEI EN 62430 : 2011	Identical
DIN EN 62430 : 2010	Identical
NBR IEC 62430 : 2010	Identical
NF EN 62430 : 2009	Identical
I.S. EN 62430 : 2009	Identical
VDE 0042-2 : 2010	Identical
DS EN 62430 : 2009	Identical
UNE EN 62430 : 2009	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNE EN 62075 : 2013	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
10/30197201 DC : 0	BS EN ISO 14006 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN
TR 103 476 : 1.1.2	ENVIRONMENTAL ENGINEERING (EE); CIRCULAR ECONOMY (CE) IN INFORMATION AND COMMUNICATION TECHNOLOGY (ICT); DEFINITION OF APPROACHES, CONCEPTS AND METRICS
BS EN 50598-3 : 2015	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
IEC TR 62476 : 1.0	GUIDANCE FOR EVALUATION OF PRODUCTS WITH RESPECT TO SUBSTANCE-USE RESTRICTIONS IN ELECTRICAL AND ELECTRONIC PRODUCTS
BS PD IEC/PAS 61076-2-114 : 2016	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-114: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR DATA AND POWER CONNECTORS WITH M8 SCREW-LOCKING
BS PD IEC TR 62726 : 2014	GUIDANCE ON QUANTIFYING GREENHOUSE GAS EMISSION REDUCTIONS FROM THE BASELINE FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS
IEC TR 62921 : 2ED 2016	QUANTIFICATION METHODOLOGY FOR GREENHOUSE GAS EMISSIONS FOR COMPUTERS AND MONITORS
ISO 20140-5 : 2017	AUTOMATION SYSTEMS AND INTEGRATION - EVALUATING ENERGY EFFICIENCY AND OTHER FACTORS OF MANUFACTURING SYSTEMS THAT INFLUENCE THE ENVIRONMENT - PART 5: ENVIRONMENTAL PERFORMANCE EVALUATION DATA
BS EN 62075 : 2012	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
BS EN ISO 14006 : 2011	ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN
11/30249097 DC : 0	BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
BS PD IEC TR 62824 : 2016	GUIDANCE ON MATERIAL EFFICIENCY CONSIDERATIONS IN ENVIRONMENTALLY CONSCIOUS DESIGN OF ELECTRICAL AND ELECTRONIC PRODUCTS
BS ISO 20140-1 : 2013	AUTOMATION SYSTEMS AND INTEGRATION - EVALUATING ENERGY EFFICIENCY AND OTHER FACTORS OF MANUFACTURING SYSTEMS THAT INFLUENCE THE ENVIRONMENT - PART 1: OVERVIEW AND GENERAL PRINCIPLES
BS EN 62474 : 2012	MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY
I.S. EN 62474 : 2012	MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY (IEC 62474:2012 (EQV))
12/30217456 DC : 0	BS ISO 20140-1 - AUTOMATION SYSTEMS AND INTEGRATION - ENVIRONMENTAL AND ENERGY EFFICIENCY EVALUATION METHOD FOR MANUFACTURING SYSTEMS - PART 1: OVERVIEW AND GENERAL PRINCIPLES
BS PD IEC TR 62785 : 2013	GUIDANCE ON THE ENVIRONMENTALLY CONSCIOUS DESIGN OF FIBRE OPTICS RELATED PRODUCTS AND SUBSYSTEMS
I.S. EN 62542 : 2013	ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013 (EQV))
PREN 50598-3 : DRAFT 2013	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
BS PD IEC TR 62837 : 2013	ENERGY EFFICIENCY THROUGH AUTOMATION SYSTEMS
BS EN 62542 : 2013	ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS
13/30280190 DC : 0	BS EN 50598-3 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
08/30192173 DC : 0	BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS
CEI EN 62474 : 2013	MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY
IEC 61076-3-119 : 1ED 2017	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND - UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
BS EN 62040-4 : 2013	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING
UNE EN ISO 14006 : 2011	ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN (ISO 14006:2011)
BS ISO 20140-5 : 2017	AUTOMATION SYSTEMS AND INTEGRATION - EVALUATING ENERGY EFFICIENCY AND OTHER FACTORS OF MANUFACTURING SYSTEMS THAT INFLUENCE THE ENVIRONMENT - PART 5: ENVIRONMENTAL PERFORMANCE EVALUATION DATA
IEC PAS 61076-3-126 : 1ED 2018	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-126: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 5 POLE POWER CONNECTOR FOR INDUSTRIAL ENVIRONMENTS WITH PUSH-PULL LOCKING
BS PD IEC TR 62921 : 2016	QUANTIFICATION METHODOLOGY FOR GREENHOUSE GAS EMISSIONS FOR COMPUTERS AND MONITORS
BS EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. EN 61076-3-120 : 2016	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
EN IEC 61076-3-119 : 2018	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ (IEC 61076-3-119:2017)
10/30230340 DC : 0	DD IEC/TS 62635 ED 1 - END OF LIFE RECYCLABILITY CALCULATION FOR ELECTRICAL AND ELECTRONIC EQUIPMENT
BS EN 61076-3-120 : 2016	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
BS PD IEC TR 62476 : 2010	GUIDANCE FOR EVALUATION OF PRODUCTS WITH RESPECT TO SUBSTANCE-USE RESTRICTIONS IN ELECTRICAL AND ELECTRONIC PRODUCTS
17/30365666 DC : 0	BS EN 62474 - MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY
BS EN 50581 : 2012	TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES
16/30329864 DC : 0	BS IEC 63000 - TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES
IEC GUIDE 109 : 3.0	ENVIRONMENTAL ASPECTS - INCLUSION IN ELECTROTECHNICAL PRODUCT STANDARDS
IEC TR 62635 : 1ED 2012	GUIDELINES FOR END-OF-LIFE INFORMATION PROVIDED BY MANUFACTURERS AND RECYCLERS AND FOR RECYCLABILITY RATE CALCULATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT
CEI EN 61076-3-120 : 1ED 2017	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
I.S. EN 50598-3 : 2015	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
IEC TR 62824 : 1ED 2016	GUIDANCE ON MATERIAL EFFICIENCY CONSIDERATIONS IN ENVIRONMENTALLY CONSCIOUS DESIGN OF ELECTRICAL AND ELECTRONIC PRODUCTS
CEI EN 62040-4 : 2014	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING
CEI EN 62075 : 2013	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN
IEC TR 62726 : 1ED 2014	GUIDANCE ON QUANTIFYING GREENHOUSE GAS EMISSION REDUCTIONS FROM THE BASELINE FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS
IEC PAS 61076-2-114 : 1ED 2016	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-114: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR DATA AND POWER CONNECTORS WITH M8 SCREW-LOCKING
IEC TR 62785 : 1ED 2013	GUIDANCE ON THE ENVIRONMENTALLY CONSCIOUS DESIGN OF FIBRE OPTICS RELATED PRODUCTS AND SUBSYSTEMS
IEC 63000 : 1ED 2016	TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES
IEC TR 62837 : 1ED 2013	ENERGY EFFICIENCY THROUGH AUTOMATION SYSTEMS
IEC TS 62844 : 1ED 2016	GUIDELINES FOR QUALITY AND RISK ASSESSMENT FOR NANO-ENABLED ELECTROTECHNICAL PRODUCTS
I.S. EN IEC 61076-3-119 : 2018	CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
I.S. EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
UNE EN 50598-3 : 2015	ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
I.S. EN 62075 : 2012	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV))
I.S. EN 62040-4 : 2013	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING (IEC 62040-4:2013 (EQV))
I.S. EN ISO 14006 : 2011	ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN
I.S. EN 50581 : 2012	TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES
UNI EN ISO 14006 : 2011	ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN
ISO 20140-1 : 2013	AUTOMATION SYSTEMS AND INTEGRATION - EVALUATING ENERGY EFFICIENCY AND OTHER FACTORS OF MANUFACTURING SYSTEMS THAT INFLUENCE THE ENVIRONMENT - PART 1: OVERVIEW AND GENERAL PRINCIPLES
CEI EN 50581 : 2013	TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES
IEC PAS 61076-3-119 : 1ED 2013	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ

Standards Referencing This Book - (Show below) - (Hide below)

IEC GUIDE 109 : 3.0	ENVIRONMENTAL ASPECTS - INCLUSION IN ELECTROTECHNICAL PRODUCT STANDARDS
ISO 14063 : 2006(R2010)	ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL COMMUNICATION - GUIDELINES AND EXAMPLES
ISO TR 14062 : 2002	ENVIRONMENTAL MANAGEMENT - INTEGRATING ENVIRONMENTAL ASPECTS INTO PRODUCT DESIGN AND DEVELOPMENT
ISO/IEC GUIDE 73 : 2002	RISK MANAGEMENT - VOCABULARY - GUIDELINES FOR USE IN STANDARDS
ISO 14001:2015	ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
ISO 9001:2015	QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS
ISO 9000 : 2015	QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
ISO GUIDE 64 : 2008(R2016)	GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
ISO 14040 : 2006(R2016)	ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK
ISO 14050 : 2009(R2017)	ENVIRONMENTAL MANAGEMENT - VOCABULARY
IEC GUIDE 114 : 1.0	ENVIRONMENTALLY CONSCIOUS DESIGN - INTEGRATING ENVIRONMENTAL ASPECTS INTO DESIGN AND DEVELOPMENT OF ELECTROTECHNICAL PRODUCTS