• There are no items in your cart

IEEE 1100 : 2005

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

POWERING AND GROUNDING ELECTRONIC EQUIPMENT
Withdrawn date

11-01-2023

Published date

05-24-2006

Chapter 1 - Overview
  1.1 Scope
  1.2 Purpose
  1.3 Background
  1.4 Text organization
  1.5 Bibliography
Chapter 2 - Definitions
  2.1 Introduction
  2.2 Alphabetical listing of terms
  2.3 Words avoided
  2.4 Acronyms and abbreviations
  2.5 Normative references
  2.6 Bibliography
Chapter 3 - General needs guidelines
  3.1 Introduction
  3.2 Power quality considerations
  3.3 Grounding considerations
  3.4 Protection of susceptible equipment
  3.5 Information technology equipment (ITE)
  3.6 Shielded, filtered, enclosed EMI/EMC areas
  3.7 Safety systems
  3.8 Coordination with other codes, standards, and agencies
  3.9 Normative references
  3.10 Bibliography
Chapter 4 - Fundamentals
  4.1 Introduction
  4.2 Electric power supplier's distribution system voltage
       disturbances
  4.3 Voltage disturbances - subtractive
  4.4 Voltage surges and interference - Additive
  4.5 Steady-state voltage/current wave shape distortion
  4.6 High- and low-frequency regimes defined
  4.7 Impedance considerations
  4.8 Grounding subsystems
  4.9 Shielding concepts
  4.10 Surge protective devices
  4.11 Normative references
  4.12 Bibliography
Chapter 5 - Instrumentation
  5.1 Introduction
  5.2 Range of available instrumentation
  5.3 Voltage and current measurements
  5.4 Descriptions of site survey tools
  5.5 Measurement considerations
  5.6 Normative references
  5.7 Bibliography
Chapter 6 - Site surveys and site power analyses
  6.1 Introduction
  6.2 Objectives and approaches
  6.3 Coordinating involved parties
  6.4 Conducting a site survey
  6.5 Harmonic current and voltage measurements
  6.6 Applying data to select cost-effective solutions
  6.7 Long-term power monitoring
  6.8 Conclusions
  6.9 Normative references
  6.10 Bibliography
Chapter 7 - Specification and selection of equipment and materials
  7.1 Introduction
  7.2 Commonly used power correction devices
  7.3 Equipment specifications
  7.4 Procurement specifications
  7.5 Verification testing
  7.6 Equipment maintenance
  7.7 Bibliography
Chapter 8 - Recommended design/installation practices
  8.1 Introduction
  8.2 Equipment room wiring and grounding
  8.3 Electrical power system selection considerations
  8.4 Equipment selection and installation considerations
  8.5 Grounding considerations
  8.6 Lightning/surge protection considerations
  8.7 380 Hz to 480 Hz systems
  8.8 Normative references
  8.9 Bibliography
Chapter 9 - Telecommunications, information technology, and
            distributed computing
  9.1 Introduction
  9.2 Vulnerability concerns vs. immunity
  9.3 Environmental exposure
  9.4 Industry guidelines
  9.5 General compliance
  9.6 Principles for establishing recommended practices
  9.7 General considerations
  9.8 Powering
  9.9 Grounding and bonding
  9.10 Evaluations and audits
  9.11 Normative references
  9.12 Bibliography
Annex 9A (normative) General
Annex 9B (normative) Nomenclature
Annex 9C (informative) List of telecommunications-related
         industry guidelines
Annex 9D (informative) Trends and changing responsibilities
Annex 9E (informative) Background on telecommunications
Annex 9F (normative) Industry-described telecommunications
         surge environment
Annex 9G (informative) Impact of technology convergence on ac
         and dc powering
Annex 9H (informative) Factors in selecting large-scale ac and
         dc power
Annex 9I (informative) Highlights of ANSI T1.311 requirements
         for dc power systems
Annex 9J (informative) Understanding telecommunications circuit
         protection
Annex 9K (normative) Fundamental concepts on surge protection
Annex 9L (informative) Additional information on surge
         protection
Chapter 10 - Industrial systems
  10.1 Introduction
  10.2 Basic noise control theory
  10.3 Method of analysis
  10.4 Recommended practices
  10.5 Distance, long power cable runs
  10.6 Bibliography
Chapter 11 - Case histories
  11.1 Introduction
  11.2 Typical utility-sourced power quality problems
  11.3 Premises switching generated surges
  11.4 Electronic loads
  11.5 Premises-wiring-related problems
  11.6 Transient voltage surge suppression network design -
        primary and secondary network design
  11.7 Typical radiated EMI problems
  11.8 Flicker
  11.9 Typical electrical inspection problems
  11.10 Typical life-safety system problems
  11.11 Typical misapplication of equipment problems
  11.12 Normative references
  11.13 Bibliography
Index

This document presents recommended design, installation, and maintenance practices for electrical power and grounding (including both safety and noise control) and protection of electronic loads such as industrial controllers, computers, and other information technology equipment (ITE) used in commercial and industrial applications.

DevelopmentNote
Supersedes IEEE DRAFT 1100. (05/2006)
DocumentType
Standard
PublisherName
Institute of Electrical & Electronics Engineers
Status
Withdrawn
Supersedes

IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
IEEE 902 : 1998 MAINTENANCE, OPERATION, AND SAFETY OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
95/210789 DC : DRAFT AUG 1995 IEC 61000-5-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5: MITIGATION METHODS AND INSTALLATION GUIDELINES - SECTION 6: MITIGATION OF EXTERNAL INFLUENCES - TECHNICAL REPORT TYPE 2
IEEE 1409-2012 IEEE Guide for Application of Power Electronics for Power Quality Improvement on Distribution Systems Rated 1 kV Through 38 kV
IEEE 3001.11-2017 IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems
IEEE 1668-2014 IEEE Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
ISO/IEC 30129:2015 Information technology Telecommunications bonding networks for buildings and other structures
CSA Z463 : 2013 GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS
IEEE DRAFT 1050 : 0 INSTRUMENTATION AND CONTROL EQUIPMENT GROUNDING IN GENERATING STATIONS
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
IEEE 1566-2015 REDLINE IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger
UFC 3-550-07 : 2017 UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS
NFPA 70B:2023 Standard for Electrical Equipment Maintenance
CSA T530 : 0 COMMERCIAL BUILDING STANDARD FOR TELECOMMUNICATIONS PATHWAYS AND SPACES
IEC TR 61000-5-6:2002 Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences
IEEE C57.13.3-2014 REDLINE IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
IEEE 3001.8-2013 IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems
IEEE DRAFT C57.13.3 : D9 2005 GUIDE FOR GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES
NETA ATS : 2017 ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
14/30282403 DC : 0 BS ISO/IEC 30129 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
UFC 3-460-01 : Change 3 UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES
EEE 602 : 2007 ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
IEEE C62.23-1995 IEEE Application Guide for Surge Protection of Electric Generating Plants
IEEE DRAFT 1159 : D6A APR 95 RECOMMENDED PRACTICE ON MONITORING ELECTRIC POWER QUALITY
CSA C22.4 No. 1 : 2009(R2018) OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
IEEE C62.44-2016 IEEE Guide for the Application of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment)
IEEE 1827-2016 IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities
IEEE 3006.7-2013 IEEE Recommended Practice for Determining the Reliability of 7x24 Continuous Power Systems in Industrial and Commercial Facilities
IEEE 1709-2010 IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships
API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 1547.2 : 2008 APPLICATION GUIDE FOR IEEE STD 1547[TM], IEEE STANDARD FOR INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS
IEEE 1662-2008 IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
IEEE C62.72-2007 IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
NASA KSC STD E 0012 : 2013 FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
IEEE 3001.2-2017 IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems
CSA T527 : 0 GROUNDING AND BONDING FOR TELECOMMUNICATIONS IN COMMERCIAL BUILDINGS
CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
IEEE DRAFT 551 : D5 2005 CALCULATING AC SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
IEEE 519-2014 REDLINE IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems
IEEE 1250-2011 REDLINE IEEE Guide for Identifying and Improving Voltage Quality in Power Systems
IEEE 45.1-2017 IEEE Recommended Practice for Electrical Installations on Shipboard--Design
IEEE C37.230-2007 IEEE Guide for Protective Relay Applications to Distribution Lines
API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 45.3-2015 IEEE Recommended Practice for Shipboard Electrical Installations -- Systems Engineering
BS ISO/IEC 30129 : 2015 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
PD IEC TR 61000-5-6:2002 Electromagnetic compatibility (EMC). Installation and mitigation guidelines Mitigation of external EM influences
IEEE 422-2012 IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
IEEE 1585 : 2002 FUNCTIONAL SPECIFICATION OF MEDIUM VOLTAGE (1-35 KV) ELECTRONIC SERIES DEVICES FOR COMPENSATION OF VOLTAGE FLUCTUATIONS
IEEE 1826-2012 IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW
IEEE 551 : 2006 CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 1623-2004 IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
API 14FZ : 2013 RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 1143-2012 IEEE Guide on Shielding Practice for Low Voltage Cables

IEEE 519-2014 REDLINE IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems
ATIS T1.311 : 1998 DC POWER SYSTEMS - TELECOMMUNICATIONS ENVIRONMENT PROTECTION
IEEE 1366-2012 IEEE Guide for Electric Power Distribution Reliability Indices
IEC 60555-1:1982 Disturbances in supply systems caused by household appliances and similar electrical equipment. Part 1: Definitions.
IEEE 241 : 1990 ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
ATIS T1.334 : 2002 ELECTRICAL PROTECTION OF COMMUNICATIONS TOWERS AND ASSOCIATED STRUCTURES
FIPS PUB 94 : 0 GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS
IEEE C62.41-1991 IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits
NEMA MG 1 : 2016 MOTORS AND GENERATORS
NFPA 75 : 2017 FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT
SEMI E10 : 2014E SPECIFICATION FOR DEFINITION AND MEASUREMENT OF EQUIPMENT RELIABILITY, AVAILABILITY, AND MAINTAINABILITY (RAM) AND UTILIZATION
SEMI F47 : 2006(R2012) SPECIFICATION FOR SEMICONDUCTOR PROCESSING EQUIPMENT VOLTAGE SAG IMMUNITY
IEEE C57.12.01-2015 REDLINE IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
IEEE 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
IEC 60801-4:1988 Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
IEEE C62.36-2014 REDLINE IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
CFR 47(PTS0-19) : OCT 2017 TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION
MIL-STD-188-124 Revision B:1992 GROUNDING BONDING AND SHIELDING FOR COMMON LONG HAUL TACTICAL COMMUNICATION SYSTEMS INCLUDING GROUND BASED COMMUNICATIONS ELECTRONICS FACILITIES & EQUIPMENTS
ATIS T1.318 : 2000 ELECTRICAL PROTECTION APPLIED TO TELECOMMUNICATIONS NETWORK PLANT AT ENTRANCES TO CUSTOMER STRUCTURES OR BUILDINGS
SEMI S10 : 2015E SAFETY GUIDELINE FOR RISK ASSESSMENT AND RISK EVALUATION PROCESS
ANSI C84.1 : 2016 ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ)
TIA/EIA 606 : B2012 ADD 1 2015 ADMINISTRATION STANDARD FOR TELECOMMUNICATIONS INFRASTRUCTURE
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
IEEE 142 : 2007 GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
TIA/EIA 571 : C2015 TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT ELECTRICAL, THERMAL MECHANICAL ENVIRONMENTAL PERFORMANCE REQUIREMENTS
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
J-STD-607 : A2002 COMMERCIAL BUILDING GROUNDING (EARTHING) AND BONDING REQUIREMENTS FOR TELECOMMUNICATIONS
CFR 29(PT1910.1000 TO END) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
ISO 9001:2015 Quality management systems — Requirements
UL 96A:13ED 2016-03 Installation Requirements for Lightning Protection Systems
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ATIS T1.316 : 2002 ELECTRICAL PROTECTION OF TELECOMMUNICATIONS OUTSIDE PLANT
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
IEEE 802.3AF : 2003 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT: DATA TERMINAL EQUIPMENT (DTE) POWER VIA MEDIA DEPENDENT INTERFACE (MDI)
CFR 29(PT1926) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
IEEE C57.12.91-2011 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
TIA 758 : B2012 CUSTOMER OWNED OUTSIDE PLANT TELECOMMUNICATIONS INFRASTRUCTURE STANDARD
UL 96:6ED 2016-06 Lightning Protection Components
ATIS T1.338 : 2004 ELECTRICAL COORDINATION OF PRIMARY AND SECONDARY SURGE PROTECTION FOR USE IN TELECOMMUNICATIONS CIRCUITS
IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
IEEE C57.110-2008 REDLINE IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.