IEEE 1584-2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
IEEE Guide for Performing Arc Flash Hazard Calculations
PDF , Hardcopy
08-12-2019
English
09-23-2002
1. Overview
2. Normative references
3. Definitions
4. Analysis process
5. Model for incident energy calculations
6. Methods of applying the model
7. Comparison of arc-flash calculation methods
8. Laboratory test programs
9. Development of model
10. Background on the arc-flash hazard
Annex A (informative) - Typical required equipment information
data collection form
Annex B (informative) - Instructions and examples using IEEE
Std 1584-2002 calculators
Annex C (informative) - Description of arc-flash incidents
Annex D (informative) - Test results database
Annex E (informative) - Units of measure
Annex F (informative) - Bibliography
Provides techniques for designers and facility operators to apply in determining the arc flash hazard distance and the incident energy to which employees could be exposed during their work on or near electrical equipment.
| Committee |
Petroleum and Chemical Industry
|
| DevelopmentNote |
Amendment 1 is available separately, see IEEE 1584A. (12/2004) This standard is also available as CD-ROM or document and CD-ROM. (01/2008) Amendment 2 is available separately, see IEEE 1584B. (08/2011) Also included in IEEE 1584 SET. (10/2011)
|
| DocumentType |
Standard
|
| Pages |
122
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SANS 984 : 1ED 2009(R2015) | Identical |
| SANS 984:2009(R2019) | Identical |
| UFC 3-501-01 : 2015 | UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING |
| MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
| IEC 61892-3:2012 | Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
| CSA Z463 : 2013 | GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| IEEE 1566-2015 REDLINE | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
| PIP ELCGL01 : 2013 | ELECTRICAL DESIGN CRITERIA |
| UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
| IEEE C2-2023 REDLINE | 2023 National Electrical Safety Code(R) (NESC(R)) |
| IEEE 1584a-2004 | IEEE Guide for Performing Arc-Flash Hazard Calculations--Amendment 1 |
| IEEE 3007.1 : 2010 | RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE C37.20.7-2007 REDLINE | IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults |
| UFC 3-560-01 : Change 1 | UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY |
| SAE J 2910 : 2014 | Recommended Practice for the Design and Test of Hybrid Electric and Electric Trucks and Buses for Electrical Safety<br> |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| CEI 18-63 : 2013 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 2: SYSTEM DESIGN |
| Z462-18 | Workplace electrical safety |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| NEMA SG 10 : 2013 | GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V |
| NEMA ABP 8:2016 | Avoid Arc-Flash Occurrences by Following Industry Standards |
| 14/30304595 DC : 0 | BS EN 61482-2 - LIVE WORKING - PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC - PART 2: REQUIREMENTS |
| BS ISO 18639-1:2018 | PPE ensembles for firefighters undertaking specific rescue activities General |
| IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
| IEEE DRAFT C37.20.7 : 0 | TESTING METAL-ENCLOSED SWITCHGEAR RATED UP TO 38 KV FOR INTERNAL ARCING FAULTS |
| NASA SSTD 8070 0138 : 2015 | ARC FLASH STANDARD |
| IEEE 3001.2-2017 | IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems |
| CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
| 15/30259978 DC : 0 | BS EN 62477-2 - SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 2: POWER ELECTRONIC CONVERTERS FROM 1000 V A.C. OR 1500 V D.C. UP TO 36 KV A.C. OR 54 KV D.C. |
| C22.10-10 | Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments |
| IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
| IEEE 45.1-2017 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
| ISO 18639-1:2018 | PPE ensembles for firefighters undertaking specific rescue activities — Part 1: General |
| IEEE C37.10-2011 REDLINE | IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures |
| IEEE 1246-2011 REDLINE | IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
| IEC 61482-2:2018 REDLINE | LIVE WORKING - PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC - PART 2: REQUIREMENTS |
| IEC 61892-2:2012 | Mobile and fixed offshore units - Electrical installations - Part 2: System design |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| IEC TS 62933-5-1:2017 | Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification |
| IEEE 1683-2014 | IEEE Guide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical Hazards |
| BS IEC 61892-3:2012 | Mobile and fixed offshore units. Electrical installations Equipment |
| IEEE C62.92.3-2012 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary Systems |
| IEEE 1887-2017 | IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications |
| IEEE 1584.1-2013 | IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM) |
| BS IEC 61892-2:2012 | Mobile and fixed offshore units. Electrical installations System design |
| C22.1-18 | Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations |
| IEC 61482-2:2018 RLV | Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements |
| CEI 18-58 : 2013 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
| IEEE/IEC C37.60-2012 | IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEC 62271-111:2012 | High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE 551 : 2006 | CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASTM F 1506 : 2017-11 | PERFORMANCE SPECIFICATION FOR FLAME RESISTANT AND ELECTRIC ARC RATED PROTECTIVE CLOTHING WORN BY WORKERS EXPOSED TO FLAMES AND ELECTRIC ARCS |
| IEEE C37.20.7-2007 REDLINE | IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults |
| IEEE C37.20.7-2001 | IEEE Guide for Testing Medium-Voltage Metal-Enclosed Switchgear for Internal Arcing Faults |
| IEEE 142-1991 | IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems |
| ASTM F 1959/F1959M : 2014-05 | TEST METHOD FOR DETERMINING THE ARC RATING OF MATERIALS FOR CLOTHING |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.