Name: IEEE 488.1 : 2003
Brand: IEEE

IEEE 488.1 : 2003

Withdrawn

STANDARD FOR HIGHER PERFORMANCE PROTOCOL FOR THE STANDARD DIGITAL INTERFACE FOR PROGRAMMABLE INSTRUMENTATION

Amended by

IEEE 488.1 : 2003 : ERR 1

Withdrawn date

10-17-2023

Published date

01-01-2003

Publisher

Institute of Electrical & Electronics Engineers

1 Overview
  1.1 Scope
  1.2 Object
  1.3 Interface system overview
2 References
3 Definitions
  3.1 General system terms
  3.2 Units connected via the interface system
  3.3 Signals and paths
4 Functional specifications
  4.1 Functional partition
  4.2 Notation used to specify interface functions
  4.3 Source handshake (SH) interface function
  4.4 Acceptor handshake (AH) and extended acceptor handshake
       (AHE) interface functions
  4.5 Talker (T) interface function (Includes serial poll
       capabilities)
  4.6 Listener (L) interface function
  4.7 Service request (SR) interface function
  4.8 Remote local (RL) interface function
  4.9 Parallel poll (PP) interface function
  4.10 Device clear (DC) interface function
  4.11 Device trigger (DT) interface function
  4.12 Controller (C) interface function
  4.13 Remote message coding and transfer
  4.14 Configuration (CF) interface function
5 Electrical specifications
  5.1 Application
  5.2 Logical and electrical state relationships
  5.3 Driver requirements
  5.4 Receiver requirements
  5.5 Composite device load requirements
  5.6 Ground requirements
  5.7 Cable characteristics
  5.8 State transition timing values
6 Mechanical specifications
  6.1 Application
  6.2 Connector type
  6.3 Connector contact assignments
  6.4 Device connector mounting
  6.5 Cable assembly
7 System applications and guidelines for the designer
  7.1 System compatibility
  7.2 Data rate consideration
  7.3 Device capabilities
  7.4 AND and OR logic operations
  7.5 Address assignment
  7.6 Typical combinations of interface functions
  7.7 Unimplemented interface message handling
8 System requirements and guidelines for the user
  8.1 System compatibility
  8.2 System installation requirements
  8.3 Address assignment
  8.4 Cabling restrictions
  8.5 Operational sequence guidelines
Annex A (informative) - Typical instrument system
Annex B (informative) - Handshake process timing sequence
Annex C (informative) - Interface function-allowable subsets
Annex D (informative) - Interface message reference list
Annex E (informative) - Multiline interface messages: ISO code
        representation
Annex F (informative) - Logic circuit implementation
Annex G (informative) - Parallel polling sequence
Annex H (informative) - Description of interface parameters on
        data sheets
Annex I (informative) - Holdoff considerations for noninterlocked
        transfers
Annex J (informative) - Address switch labeling and interface status
        indicators
Annex K (informative) - Recommended methods for reducing the effects
        of radiated and conducted interference for devices specified
        in this standard

Specifies interface systems used to interconnect both programmable and nonprogrammable electronic measuring apparatus with other apparatus and accessories necessary to assemble instrumentation systems. It applies to the interface of instrumentation systems, or portions of them, in which the: a) Data exchanged among the interconnected apparatus is digital (as distinct from analog); b) Number of devices that may be interconnected by one contiguous bus does not exceed 15; c) Total transmission path lengths over the interconnecting cables does not exceed 20 m; d) Data rate among devices does not exceed 8 000 000 B/s.

Committee	TC-8
DevelopmentNote	Supersedes IEEE DRAFT 488.1 (12/2003) Also numbered as IEC 60488-1. (07/2004)
DocumentType	Standard
ProductNote	NEW CHILD ERR 1 IS NOW ADDED
PublisherName	Institute of Electrical & Electronics Engineers
Status	Withdrawn

14/30316052 DC : 0	BS EN 61000-4-23 ED 2.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
BS ISO/IEC 18047-2:2012	Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications below 135 kHz
IEC 61000-4-23:2016	Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances
DEFSTAN 59-188(PT2)/1(2010) : 2010	HIGH ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND BASED COMMUNICATION FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS - PART 2: TRANSPORTABLE AND MOBILE SYSTEMS
DEFSTAN 59-188(PT2)/2(2017) : 2017	HIGH ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND BASED COMMUNICATION FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS - PART 2: TRANSPORTABLE AND MOBILE SYSTEMS
DEFSTAN 66-031(PT8)/2(2016) : 2016	REQUIREMENTS FOR ELECTRONIC AND ELECTRICAL TEST AND MEASUREMENT EQUIPMENT - PART 8: REQUIREMENTS FOR AUTOMATIC TEST SYSTEMS UTILISING AN OPEN SYSTEM ARCHITECTURE
MIL T 28800 : E	TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR
A-A-59273 Revision B:2005	GENERATOR, SIGNAL (300 KHZ TO 2 GHZ)
CEI EN 61000-4-23 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
DIN EN 61000-4-23 : 2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES - TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
BS EN 61000-4-23:2001	Electromagnetic compatibility (EMC). Testing and measurement techniques Test methods for protective devices for HEMP and other radiated disturbances
MIL-PRF-28800 Revision F:1996	TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
NASA KSC STD E 0021 : 2002	KSC TELECOMMUNICATION PREMISES DISTRIBUTION SYSTEMS, DESIGN OF, STANDARD FOR
VDE 0847-4-23 : 2001	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-23: TESTING AND MEASUREMENT TECHNIQUES; TEST METHODS FOR PROTECTIVE DEVICES FOR HEMP AND OTHER RADIATED DISTURBANCES
IEC 60488-2:2004	Standard digital interface for programmable instrumentation - Part 2: Codes, formats, protocols and common commands
NEMA ICS 16:2001	Motion/Position Control Motors, Controls and Feedback Devices
NEMA MG 7 : 93 REV 1 96	MOTION/POSITION CONTROL MOTORS AND CONTROLS
ISO/IEC TR 18047-2:2006	Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz
IEEE DRAFT 1174 : D3.0 99	DRAFT STANDARD SERIAL INTERFACE FOR PROGRAMMABLE INSTRUMENTATION
IEEE 488.2 : 1992	STANDARD CODES, FORMATS, PROTOCOLS, AND COMMON COMMANDS FOR USE WITH IEEE 488.1-1987, IEEE STANDARD DIGITAL INTERFACE FOR PROGRAMMABLE INSTRUMENTATION
PD ISO/IEC TR 18047-2:2006	Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications below 135 kHz
CAN/CSA-ISO/IEC 18047-2:13 (R2017)	Information technology - Radio frequency identification device conformance test methods - Part 2: Test methods for air interface communications below 135 kHz (Adopted ISO/IEC 18047-2:2012, first edition, 2012-01-15)
CSA ISO/IEC TR 18047-2 : 2006	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 2: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ
BS EN 61326:1998	Electrical equipment for measurement, control and laboratory use. EMC requirements
I.S. EN 61326:1998
ASTM D 3380 : 2014 : REDLINE	Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
IEEE 1671.1-2009	IEEE Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML: Exchanging Test Descriptions
10/30216008 DC : 0	BS EN 61326-1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS
IEEE DRAFT 1226.4 : D2.0 DEC 95	A BROAD BASED ENVIRONMENT FOR TEST (ABBET) SOFTWARE INTERFACE FOR INSTRUMENT DRIVERS
CSA ISO/IEC 18047-2 : 2013	INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 2: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ
IEEE 1155 : 1992	VMEBUS EXTENSIONS FOR INSTRUMENTATION: VXIBUS
TR 102 021-9 : 1.2.1	TERRESTRIAL TRUNKED RADIO (TETRA); USER REQUIREMENT SPECIFICATION TETRA RELEASE 2.1; PART 9: PERIPHERAL EQUIPMENT INTERFACE
ISO/IEC 18047-2:2012	Information technology — Radio frequency identification device conformance test methods — Part 2: Test methods for air interface communications below 135 kHz
EN 61326:1997/A3:2003

IEC 60348:1978	Safety requirements for electronic measuring apparatus
IEC 60359:2001	Electrical and electronic measurement equipment - Expression of performance
MIL-STD-202 Revision H:2015	ELECTRONIC AND ELECTRICAL COMPONENT PARTS