• There are no items in your cart

IEEE 802.3AH : 2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

IEEE STANDARD FOR INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT: MEDIA ACCESS CONTROL PARAMETERS, PHYSICAL LAYERS, AND MANAGEMENT PARAMETERS FOR SUBSCRIBER ACCESS
Available format(s)

Hardcopy , PDF

Superseded date

12-09-2005

Language(s)

English

Published date

01-01-2004

1 Introduction
   1.2 Notation
   1.3 Normative References
   1.4 Definitions
   1.5 Abbreviations
22 Reconciliation Sublayer (RS) and Media Independent
   Interface (MII)
30 10 Mb/s, 100 Mb/s, 1000 Mb/s and 10 Gb/s Management
   30.1 Overview
   30.11 Layer Management for Physical Medium Entity (PME)
45 Management Data Input/Output (MDIO) Interface
   45.1 Overview
   45.2 MDIO interface registers
   45.5 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 45, MDIO/MDC management interface
Annex A (informative) Bibliography
Annex 30A (normative) GDMO specification for IEEE 802.3
          managed object classes
Annex 30B (normative) GDMO and ASN.1 definitions for
          management
Annex 31A (normative) MAC Control opcode assignments
Annex 43B (normative) Requirements for support of Slow
          Protocols
56 Introduction to Ethernet for subscriber access networks
   56.1 Overview
   56.2 State diagrams
   56.3 Protocol Implementation Conformance Statement (PICS)
         proforma
57 Operations, Administration, and Maintenance (OAM)
   57.1 Overview
   57.2 Functional specifications
   57.3 Detailed functions and state diagrams
   57.4 OAM PDUs
   57.5 OAM TLVs
   57.6 Variables
   57.7 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 57, Operations, Administration,
         and Maintenance (OAM)
58 Physical Medium Dependent (PMD) sublayer and medium, type
   100BASE-LX10 (Long Wavelength) and 100BASE-BX10 (BiDirectional
   Long Wavelength)
   58.1 Overview
   58.2 PMD functional specifications
   58.3 PMD to MDI optical specifications for 100BASE-LX10
   58.4 PMD to MDI optical specifications for 100BASE-BX10
   58.5 Illustrative 100BASE-LX10 and 100BASE-BX10 channels
         and penalties (informative)
   58.6 Jitter at TPI and TP4 for 100BASE-LX10 and
         100BASE-BX10 (informative)
   58.7 Optical measurement requirements
   58.8 Environmental safety and labeling
   58.9 Characteristics of the fiber optic cabling
   58.10 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 58, Physical Medium Dependent
         (PMD) sublayer and medium, type 100BASE-LX10 (Long
         Wavelength) and 100BASE-BX10 (BiDirectional Long
         Wavelength)
59 Physical Medium Dependent (PMD) sublayer and medium,
   type 1000BASE-LX10 (Long Wavelength) and 1000BASE-BX10
   (BiDirectional Long Wavelength)
   59.1 Overview
   59.2 PMD functional specifications
   59.3 PMD to MDI optical specifications for 1000BASE-LX10
   59.4 PMD to MDI optical specifications for 1000BASE-BX10-D
         and 1000BASE-BX10-U
   59.5 Illustrative 1000BASE-LX10 and 1000BASE-BX10 channels
         and penalties (informative)
   59.6 Jitter specifications
   59.7 Optical measurement requirements
   59.8 Environmental, safety and labeling specifications
   59.9 Characteristics of the fiber optic cabling
   59.10 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 59, Physical Medium Dependent
         (PMD) sublayer and medium, type 1000BASE-LX10 (Long
         Wavelength) and 1000BASE-BX10 (Bidirectional Long
         Wavelength)
60 Physical Medium Dependent (PMD) sublayer and medium, type
   1000BASE-PX10 and 1000BASE-PX20 (long wavelength passive
   optical networks)
   60.1 Overview
   60.2 PMD functional specifications
   60.3 PMD to MDI optical specifications for 1000BASE-PX10-D
         and 1000BASE-PX10-U
   60.4 PMD to MDI optical specifications for 1000BASE-PX20-D
         and 1000BASE-PX20-U
   60.5 Illustrative 1000BASE-PX10 and 1000BASE-PX20 channels
         and penalties (informative)
   60.6 Jitter at TPI-4 for 1000BASE-PX10 and 1000BASE-PX20
         (informative)
   60.7 Optical measurement requirements
   60.8 Environmental, safety, and labeling
   60.9 Characteristics of the fiber optic cabling
   60.10 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 60, Physical Medium Dependent
         (PMD) sublayer and medium, type 1000BASE-PX10 and
         1000BASE-PX20 (long wavelength passive optical
         networks)
61 Physical Coding Sublayer (PCS), Transmission Convergence
   (TC) sublayer, and common specifications, type 10PASS-TS
   and type 2BASE-TL
   61.1 Overview
   61.2 PCS functional specifications
   61.3 TC sublayer functional specifications
   61.4 Handshaking and PHY control specification for type
         2BASE-TL and 10PASS-TS
   61.5 Link segment characteristics
   61.6 MDI specification
   61.7 System considerations
   61.8 Environmental specifications
   61.9 PHY labeling
   61.10 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 61, Physical Coding Sublayer (PCS),
         Transmission Convergence (TC) sublayer, and common
         specifications type 10PASS-TS, 2BASE-TL
62 Physical Medium Attachment (PMA) and Physical Medium
   Dependent (PMD), type 10PASS-TS
   62.1 Overview
   62.2 PMA functional specifications
   62.3 PMD functional specifications
   62.4 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 62, Physical Medium Attachment
         (PMA) and Physical Medium Dependent (PMD), type
         10PASS-TS
63 Physical Medium Attachment (PMA) and Physical Medium
   Dependent (PMD), type 2BASE-TL
   63.1 2BASE-TL Overview
   63.2 2BASE-TL PMA functional specifications
   63.3 2BASE-TL PMD functional specifications
   63.4 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 63, Physical Medium Attachment
         (PMA) and Physical Medium Dependent (PMD), type
         2BASE-TL
64 Multi-point MAC Control
   64.1 Overview
   64.2 Multi-point MAC Control operation
   64.3 Multi-point Control Protocol (MPCP)
   64.4 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 64, Multi-point MAC Control
65 Extensions of the Reconciliation Sublayer (RS) and Physical
   Coding Sublayer (PCS)/Physical Media Attachment (PMA) for
   1000BASE-X for Multi-Point Links and Forward Error Correction
   65.1 Extensions of the Reconciliation Sublayer (RS) for
         Point to Point Emulation
   65.2 Extensions of the physical coding sublayer for data
         detection and forward error correction
   65.3 Extensions to PMA for 1000BASE-PX
   65.4 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 65, Extensions of the Reconciliation
         Sublayer (RS) and Physical Coding Sublayer (PCS)/Physical
         Media Attachment (PMA) for 1000BASE-X for Multi-Point
         Links and Forward Error Correction
66 Extensions of the 10 Gb/s Reconciliation Sublayer (RS),
   100BASE-X PHY, and 1000BASE-X PHY for unidirectional transport
   66.1 Modifications to the physical coding sublayer (PCS) and
         physical medium attachment (PMA) sublayer, type
         100BASE-X
   66.2 Modifications to the physical coding sublayer (PCS) and
         physical medium attachment (PMA) sublayer, type
         1000BASE-X
   66.3 Modifications to the reconciliation sublayer (RS) for
         10 Gb/s operation
   66.4 Protocol Implementation Conformance Statement (PICS)
         proforma for Clause 66, Extensions of the 10 Gb/s
         Reconciliation Sublayer (RS), 100BASE-X PHY, and
         1000BASE-X PHY for unidirectional transport
67 System considerations for Ethernet subscriber access
   networks
   67.1 Overview
   67.2 Discussion and examples of EFM P2MP topologies
   67.3 Hybrid Media topologies
   67.4 Topology limitations
   67.5 Deployment restrictions for subscriber access
         copper
   67.6 Operations, Administration, and Maintenance
Annex 4A (normative) Simplified full duplex media access
         control
Annex 22D (informative) Clause 22 access to Clause 45 MMD
          registers
Annex 58A (informative) Frame based testing
Annex 61A (informative) EFM copper examples
Annex 61B (normative) Handshake codepoints for 2BASE-TL and
          10PASS-TS
Annex 62A (normative) PMD profiles for 10PASS-TS
Annex 62B (normative) Performance guidelines for 10PASS-TS
          PMD profiles
Annex 62C (informative) 10PASS-TS Examples
Annex 63A (normative) PMD Profiles for 2BASE-TL
Annex 63B (normative) Performance guidelines for 2BASE-TL PMD
          profiles
Annex 67A (informative) Environmental characteristics for
          Ethernet subscriber access networks

Specifies the concept of Ethernet Passive Optical Networks (EPONs), in which a point to multi-point (P2MP) network topology is implemented with passive optical splitters, along with optical fiber PMDs that support this topology.

DevelopmentNote
This is an Amendment to IEEE 802.3 (09/2004)
DocumentType
Standard
Pages
640
PublisherName
Institute of Electrical & Electronics Engineers
Status
Superseded
SupersededBy
Supersedes

I.S. EN 61753-086-2:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
TS 101 569-1 : 1.1.1 INTEGRATED BROADBAND CABLE TELECOMMUNICATION NETWORKS (CABLE); CABLE NETWORK TRANSITION TO IPV6; PART 1: IPV6 TRANSITION REQUIREMENTS
IEC 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style of OTDR reflecting devices for category C - Controlled environments
EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment
EN 61784-5-3:2013 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
BS EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode OTDR reflecting device for category C. Controlled environment
11/30244755 DC : 0 BS EN 61753-041-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORISED SINGLE-MODE FTTX REFLECTOR DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
BS EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C. Controlled environment
TS 102 973 : 1.1.1 ACCESS TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); NETWORK TERMINATION (NT) IN NEXT GENERATION NETWORK ARCHITECTURES
TR 101 546 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); INTEGRATED BROADBAND CABLE AND TELEVISION NETWORKS; CONVERGED CABLE ACCESS PLATFORM ARCHITECTURE
I.S. EN 61753-087-6:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT (IEC 61753-087-6:2012 (EQV))
I.S. EN 61753-041-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 041-2: NON-CONNECTORIZED SINGLE-MODE OTDR REFLECTING DEVICE FOR CATEGORY C - CONTROLLED ENVIRONMENT
BS EN 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C. Controlled environment
09/30191277 DC : DRAFT MAY 2009 BS EN 61753-087-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 61753-086-6:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
IEC 61753-382-2:2015 Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments
09/30191285 DC : DRAFT MAY 2009 BS EN 61753-086-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 086-6: NON-CONNECTORISED SINGLE-MODE BI-DIRECTIONAL 1490/1550 NM DOWNSTREAM AND 1310 NM UPSTREAM WWDM DEVICES FOR CATEGORY O - CONTROLLED ENVIRONMENT
10/30227070 DC : 0 BS EN 61753-087-6 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-6: NON-CONNECTORISED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY O - UNCONTROLLED ENVIRONMENT
IEEE 1904.1-2013 IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON)
I.S. EN 61784-5-3:2013 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
I.S. EN 61753-042-2:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 042-2: PLUG-PIGTAIL-STYLE AND PLUG-RECEPTACLE-STYLE OTDR REFLECTING DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENTS
IEC 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
IEC 61753-087-2:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category C - Controlled environment
IEC 61753-086-2:2009 Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
BS EN 61784-5-3:2013 Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 3
IEC 61753-086-6:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
IEC 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
IEC 61753-089-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
EN 61753-086-6 : 2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
BS EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C. Controlled environment
I.S. EN 61753-089-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 089-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL OTDR MONITORING WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-089-2:2013 (EQV))
I.S. EN 60728-13:2010 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
BS EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions
BS EN 61753-086-6:2011 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream and 1310 nm upstream WWDM devices for category O. Uncontrolled environment
BS EN 61753-087-6:2012 Fibre optic interconnecting devices and passive components. Performance standard Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment
BS EN 61753-042-2:2014 Fibre optic interconnecting devices and passive components. Performance standard Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments
I.S. EN 61753-087-2:2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 087-2: NON-CONNECTORIZED SINGLE-MODE BIDIRECTIONAL 1310 NM UPSTREAM AND 1490 NM DOWNSTREAM WWDM DEVICES FOR CATEGORY C - CONTROLLED ENVIRONMENT
EN 61753-089-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
EN 61753-087-2:2011 Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment
EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment

TIA 455-95 : A2000(R2005) FOTP-95 - ABSOLUTE OPTICAL POWER TEST FOR OPTICAL FIBERS AND CABLES
IEC 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
TIA 455-127 : A2006(R2014) FOTP-127-A - BASIC SPECTRAL CHARACTERIZATION OF LASER DIODES
IEC 61754-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance

View more information
US$420.55
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.