• There are no items in your cart

INCITS/ISO/IEC 20162 : 2001

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 300 MM OPTICAL DISK CARTRIDGES OF TYPE WORM (WRITE ONCE READ MANY) USING IRREVERSIBLE EFFECTS - CAPACITY: 30 GBYTES PER CARTRIDGE
Available format(s)

Hardcopy , PDF

Withdrawn date

07-23-2013

Language(s)

English

Published date

01-01-2001

Section 1 - General
1 Scope
2 Conformance
   2.1 Optical Disk Cartridge (ODC)
   2.2 Generating System
   2.3 Receiving System
   2.4 Compatibility statement
3 Normative references
4 Terms and definitions
   4.1 case
   4.2 Clamping Reference Area
   4.3 Clamping Zone
   4.4 Cyclic Redundancy Check (CRC)
   4.5 Data Zone
   4.6 defect management
   4.7 Disk Reference Plane
   4.8 entrance surface
   4.9 Error Correction Code (ECC)
   4.10 format
   4.11 hub
   4.12 interleaving
   4.13 Logical Sector
   4.14 Logical Block Address
   4.15 mark
   4.16 mark edge
   4.17 mark edge recording
   4.18 optical disk
   4.19 optical disk cartridge (ODC)
   4.20 polarization
   4.21 prerecorded mark
   4.22 read power
   4.23 recording layer
   4.24 Reed-Solomon code
   4.25 space
   4.26 spindle
   4.27 substrate
   4.28 track
   4.29 track pitch
   4.30 write-inhibit hole
5 Conventions and notations
   5.1 Representation of numbers
   5.2 Names
6 List of acronyms
7 General description of the optical disk cartridge
8 General requirements
   8.1 Environments
   8.2 Temperature shock
   8.3 Safety requirements
   8.4 Flammability
9 Reference Drive
   9.1 Optical system
   9.2 Optical beam
   9.3 Read Channel
   9.4 Tracking
   9.5 Rotation of the disk
Section 2 - Mechanical and physical characteristics
10 Dimensional and physical characteristics of the case
   10.1 General description of the case
   10.2 Relationship of Sides A and B
   10.3 Reference axes of the case
   10.4 Case drawings
   10.5 Dimensions of the case
   10.6 Mechanical characteristics
   10.7 Drop test
11 Dimensional, mechanical and physical characteristics of
   the disk
   11.1 General description of the disk
   11.2 Reference axis and plane of the disk
   11.3 Dimensions of the disk
   11.4 Mechanical characteristics
   11.5 Optical characteristics
12 Interface between cartridge and drive
   12.1 Clamping method
   12.2 Clamping force
   12.3 Capture cylinder
   12.4 Disk position in the operating condition
Section 3 - Format of information
13 General description
14 Track format
   14.1 Track definition
   14.2 Direction of track spiral
   14.3 Track pitch
   14.4 Track numbering
   14.5 Track layout
   14.6 Segment format
   14.7 Servo Field format
   14.8 Address format
   14.9 Recordable Field format
15 Zone organization
   15.1 Logical Sector format
   15.2 CRC and ECC bytes
   15.3 User Area - Format of Data Zones
16 Recording code
   16.1 Termination Field
   16.2 Data recording method for the RLL (1,7) Code
17 Defect Management
   17.1 Defective Sectors recorded in the SDI
   17.2 Reading and writing Procedure
   17.3 Format of the Relocation Area
   17.4 Format of the Dynamic Relocation Maps Sectors
18 Prerecorded Information
   18.1 Prerecorded Information definition
   18.2 Reserved regions
   18.3 Specific Disk Information (SDI)
   18.4 Read Focus Optimization (RFO) Tracks
Section 4 - Characteristics of Prerecorded Information
19 Method of testing
   19.1 Environment
   19.2 Use of the Reference Drive
   19.3 Definition of signals
20 Prerecorded Information signal requirements
   20.1 Modulation Depth of preformatted marks
   20.2 Ratio of minimum and maximum Clock Mark signal
        amplitude with open tracking loop
   20.3 Clock Mark jitter
   20.4 Relative tangential displacement of preformatted marks
   20.5 Variation of QWT Marks signal amplitude
   20.6 Track pitch
   20.7 Radial runout
   20.8 Radial accelerations
   20.9 Tracking Gain
Section 5 - Characteristics of the recording layer
21 Method of testing
   21.1 Test Regions
   21.2 Environment
   21.3 Use of the Reference Drive
   21.4 Write conditions
22 Write characteristics
   22.1 Signal modulation
   22.2 Signal Resolution
   22.3 Write power margin
Section 6 - Characteristics of user data
23 Method of testing
   23.1 Environment
   23.2 Use of the Reference Drive
24 Minimum quality of a Sector
   24.1 Servo Fields
   24.2 User-written data
   24.3 Pre-written data
25 Data interchange requirements
   25.1 Tracking
   25.2 User-written and pre-written data
   25.3 Quality of disk
Annexes
A - Air cleanliness class 100 000
B - Edge distortion test
C - Compliance test
D - Test method for measuring the adsorbent force of the hub
E - Creeping One of Four Code (COF)
F - PBA, LBA formats
G - Interleave, CRC, ECC
H - Content of SDI Sectors
J - SISIC (Selective Inter Symbol Interference Cancellation)
    data detection
K - Requirements for interchange
L - Shape and sequence of write pulses for testing
M - Office environment
N - Derivation of the operating climatic environment
P - Transportation
Q - Track deviation measurement

Describes the characteristics of a 300 mm optical disk cartridge (ODC) of Type WORM (Write Once Read Many) using irreversible effects, with a capacity of 30 Gbytes.

DocumentType
Standard
Pages
88
PublisherName
Information Technology Industry Council
Status
Withdrawn

Standards Relationship
ISO/IEC 20162:2001 Identical

IEC 60950:1999 Safety of information technology equipment
ISO/IEC 646:1991 Information technology ISO 7-bit coded character set for information interchange

View more information
US$95.40
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.