ISO 10961:2010
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
11-15-2019
English, French
10-13-2010
ISO 10961:2010 specifies the requirements for the design, construction, testing and initial inspection of a transportable cylinder bundle. It is applicable to cylinder bundles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to cylinder bundles for acetylene.
It does not apply to packages in which cylinders are manifolded together in a support frame which is designed to be fixed permanently to a road vehicle, to a railway wagon or to the ground as a customer storage vessel. It does not apply to cylinder bundles which are designed for use in extreme environmental or operational conditions when additional and extraordinary requirements are imposed to maintain safety standards, reliability and performance, e.g. offshore cylinder bundles.
Specific requirements for acetylene cylinder bundles containing acetylene in a solvent are included in an annex. ISO 10961 does not, however, cover acetylene cylinder bundles with solvent-free acetylene cylinders.
ISO 10961 is intended primarily for industrial gases other than liquefied petroleum gases (LPGs), but it may also be used for LPGs.
| DevelopmentNote |
Supersedes ISO/DIS 10961. (10/2010)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN ISO 10961 : JUN 2012 | Identical |
| NF EN ISO 10961 : 2012 | Identical |
| NBN EN ISO 10961 : 2012 | Identical |
| NEN EN ISO 10961 : 2012 | Identical |
| NS EN ISO 10961 : 2012 | Identical |
| I.S. EN ISO 10961:2012 | Identical |
| PN EN ISO 10961 : 2012 | Identical |
| SN EN ISO 10961 : 2012 | Identical |
| UNI EN ISO 10961 : 2012 | Identical |
| UNE-EN ISO 10961:2012 | Identical |
| BS EN ISO 10961:2012 | Identical |
| EN ISO 10961:2012 | Identical |
| DIN EN ISO 10961:2012-06 | Identical |
| NEN ISO 10961 : NOV 2010 | Identical |
| DIN EN 15888 E : 2014 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
| 12/30236675 DC : 0 | BS EN ISO 14114 - GAS WELDING EQUIPMENT - ACETYLENE MANIFOLD SYSTEMS FOR WELDING, CUTTING AND ALLIED PROCESSES - GENERAL REQUIREMENTS |
| B341-15 | UN pressure receptacles and multiple-element gas containers for the transport of dangerous goods |
| UNE-EN 15888:2014 | Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing |
| BS EN ISO 14114:2018 | Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements |
| BS EN 13807:2017 | Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing |
| DIN EN 15888:2014-07 | Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing |
| BS EN 15888:2014 | Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing |
| 16/30329281 DC : 0 | BS ISO 20475 - GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
| I.S. EN 15888:2014 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
| EN ISO 14114:2018 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017) |
| ISO 14114:2017 | Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements |
| ONORM EN 15888 : 2014 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
| I.S. EN 13807:2017 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| EN 15888:2014 | Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing |
| I.S. EN ISO 14114:2018 | GAS WELDING EQUIPMENT - ACETYLENE MANIFOLD SYSTEMS FOR WELDING, CUTTING AND ALLIED PROCESSES - GENERAL REQUIREMENTS (ISO 14114:2017) |
| 14/30287821 DC : 0 | BS EN 13807 - TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| ISO 10855-2:2018 | Offshore containers and associated lifting sets Part 2: Design, manufacture and marking of lifting sets |
| ISO 20475:2018 | Gas cylinders — Cylinder bundles — Periodic inspection and testing |
| ISO 10855-1:2018 | Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers |
| ONORM EN ISO 14114 : 2015 | GAS WELDING EQUIPMENT - ACETYLENE MANIFOLD SYSTEMS FOR WELDING, CUTTING AND ALLIED PROCESSES - GENERAL REQUIREMENTS (ISO 14114:2014) |
| DIN EN 13807:2016-02 (Draft) | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| UNE-EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
| PREN 13807 : DRAFT 2014 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| 15/30331867 DC : 0 | BS EN ISO 10855-3 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING |
| 15/30331856 DC : 0 | BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
| ISO 10855-3:2018 | Offshore containers and associated lifting sets Part 3: Periodic inspection, examination and testing |
| B340-14 | Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, class 2 |
| UNE-EN ISO 14114:2014 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2014) |
| EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
| 16/30333447 DC : 0 | BS EN ISO 14114 - GAS WELDING EQUIPMENT - ACETYLENE MANIFOLD SYSTEMS FOR WELDING, CUTTING AND ALLIED PROCESSES - GENERAL REQUIREMENTS |
| UNI EN 15888 : 2014 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - PERIODIC INSPECTION AND TESTING |
| DIN EN 13807:2017-05 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| ISO 7225:2005 | Gas cylinders Precautionary labels |
| ISO 80000-4:2006 | Quantities and units Part 4: Mechanics |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| EN 1593:1999/A1:2003 | NON-DESTRUCTIVE TESTING - LEAK TESTING - BUBBLE EMISSION TECHNIQUES |
| ISO 10298:2010 | Determination of toxicity of a gas or gas mixture |
| ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| ASME B31.3:2016 | PROCESS PIPING |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN 13133:2000 | Brazing - Brazer approval |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| EN 1779:1999/A1:2003 | NON-DESTRUCTIVE TESTING - LEAK TESTING - CRITERIA FOR METHOD AND TECHNIQUE SELECTION |
| ASTM E 390 : 2015 : REDLINE | Standard Reference Radiographs for Steel Fusion Welds |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 10286:2007 | Gas cylinders Terminology |
| EN 13134:2000 | Brazing - Procedure approval |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| EN 1291:1998/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING OF WELDS - ACCEPTANCE LEVELS |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 1290:1998/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS |
| ISO 13769:2007 | Gas cylinders Stamp marking |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.