ISO 11201:2010
Current
Current
The latest, up-to-date edition.
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
05-06-2010
ISO 11201:2010 specifies a method for determining the emission sound pressure levels of machinery or equipment, at a work station and at other specified positions nearby, in an essentially free field over a reflecting plane. A work station is occupied by an operator and may be located in open space, in the room where the source under test operates, in a cab fixed to the source under test, or in an enclosure remote from the source under test. One or more specified positions may be located in the vicinity of a work station, or in the vicinity of an attended or unattended machine. Such positions are sometimes referred to as bystander positions.
Emission sound pressure levels are determined as A-weighted levels. Additionally, levels in frequency bands and C-weighted peak emission sound pressure levels can be determined in accordance with ISO 11201:2010, if required.
With the method specified in ISO 11201:2010, results of accuracy grade 1 (precision grade) or accuracy grade 2 (engineering grade) are obtained. Corrections are applied for background noise, but not for the acoustic environment. Instructions are given for the mounting and operation of the source under test and for the choice of microphone positions for the work station and for other specified positions. One purpose of the measurements is to permit comparison of the performance of different units of a given family of machines, under defined environmental conditions and standardized mounting and operating conditions.
The method specified in ISO 11201:2010 is suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001.
The method specified in ISO 11201:2010 is applicable to all types and sizes of noise sources.
The type of test environment influences the accuracy of the determination of emission sound pressure levels. For the application of ISO 11201:2010 an essentially free field over a reflecting plane (indoors or outdoors) is required.
ISO 11201:2010 is applicable to work stations and other specified positions where emission sound pressure levels are to be measured.
Appropriate positions where measurements may be made include the following: a) work station located in the vicinity of the source under test; this is the case for many industrial machines and domestic appliances; b) work station within a cab which is an integral part of the source under test; this is the case for many industrial trucks and earth-moving machines; c) work station within a partial or total enclosure (or behind a screen) supplied by the manufacturer as an integral part of the source under test; d) work station partially or totally enclosed by the source under test; this situation may be encountered with some large industrial machines; e) bystander positions occupied by individuals not responsible for the operation of the source under test, but who may be in its immediate vicinity, either occasionally or continuously; f) other specified positions, not necessarily work stations or bystander positions.
The work station may also lie on a specified path along which an operator moves.
| DevelopmentNote |
Supersedes ISO 6081. (04/2001) Supersedes ISO/DIS 11201. (05/2010)
|
| DocumentType |
Standard
|
| Pages |
35
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SANS 11201:2013(R2019) | Identical |
| NBN EN ISO 11201 : 2010 | Identical |
| NEN EN ISO 11201 : 2010 | Identical |
| NS EN ISO 11201 : 2010 | Identical |
| I.S. EN ISO 11201:2010 | Identical |
| PN EN ISO 11201 : 2012 | Identical |
| SANS 11201 : 2ED 2013 | Identical |
| SN EN ISO 11201 : AUG 2010 | Identical |
| UNI EN ISO 11201 : 2010 | Identical |
| SS-EN ISO 11201:2010 | Identical |
| SAC GB/T 17248.2 : 2018 | Identical |
| UNE-EN ISO 11201:2010 V2 | Identical |
| BS EN ISO 11201:2010 | Identical |
| UNE-EN ISO 11201:2010 | Identical |
| EN ISO 11201:2010 | Identical |
| NF EN ISO 11201 : 2010 | Identical |
| DIN EN ISO 11201:2010-10 | Identical |
| GOST ISO 11201 : 2016 | Identical |
| BS EN 15774:2010 | Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements |
| I.S. EN 15997:2011 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 13684 : 2010 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| 04/30111135 DC : DRAFT MARCH 2004 | ISO 6394 - EARTH MOVING MACHINERY - DETERMINATION OF THE EMISSION SOUND PRESSURE LEVEL AT THE OPERATOR'S POSITION - STATIONARY TEST CONDITIONS |
| 08/30193440 DC : 0 | BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE |
| DIN EN 15503 E : 2016 | GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY |
| 14/30297515 DC : 0 | BS EN 16704-2-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGY - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS) |
| BS EN 15895 : 2011 | CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS |
| INCITS/ISO/IEC 21118 : 2013 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - DATA PROJECTORS |
| PREN 12733 : DRAFT 2016 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| 13/30266413 DC : 0 | BS ISO 13105-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION |
| 12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 08/30191994 DC : 0 | BS ISO 8566-1 - CRANES - CABINS AND CONTROL STATIONS - PART 1: GENERAL |
| UNE-EN 60745-2-16:2011 | Hand-held motor-operated electric tools - Safety -- Part 2-16: Particular requirements for tackers |
| ECMA 341 : 4ED 2010 | ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS |
| 07/30158774 DC : 0 | BS EN 791 AMD1 - DRILL RIGS - SAFETY |
| ISO 19085-1:2017 | Woodworking machines Safety Part 1: Common requirements |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 16/30337092 DC | BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements |
| 09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 16486 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| DIN EN 16564 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| BS EN 16029:2012 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads. Single-track two-wheel motor vehicles. Safety requirements and test methods |
| BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
| UNE-EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| I.S. EN 50569:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| 04/30111141 DC : DRAFT MARCH 2004 | ISO 6396 - EARTH MOVING MACHINERY - DETERMINATION OF EMISSION SOUND PRESSURE LEVEL AT OPERATOR'S POSITION - DYNAMIC TEST CONDITIONS |
| UNI ISO 8566-1 : 2010 | CRANES - CABINS AND CONTROL STATIONS - PART 1: GENERAL |
| DIN EN 14958:2010-10 | Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| BS ISO 6396:2008 | Earth-moving machinery. Determination of emission sound pressure level at operator\'s position. Dynamic test conditions |
| ONORM EN ISO 22868 : 2011 | FORESTRY AND GARDEN MACHINERY - NOISE TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - ENGINEERING METHOD (GRADE 2 ACCURACY) |
| I.S. EN ISO 11553-3:2013 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013) |
| UNE-EN 16851:2017 | Cranes - Light crane systems |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| IEC 60335-2-69 REDLINE : 5.0 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE |
| 12/30262897 DC : DRAFT JUNE 2012 | BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
| I.S. EN 16230-1:2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| BS EN 16252:2012 | Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements |
| ONORM EN 15746-2 : 2013 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN ISO 16089 E : 2016 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
| BS EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory |
| 00/706811 DC : DRAFT MAR 2000 | BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 16474:2015 | Plastics and rubber machines. Tyre curing machines. Safety requirements |
| DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 60335-2-67:2012 | Household and similar electrical appliances. Safety Particular requirements for floor treatment machines for commercial use |
| 03/114108 DC : DRAFT AUG 2003 | EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 08/30182206 DC : DRAFT SEP 2008 | BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY |
| I.S. EN 415-9:2009 | SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3 |
| BS EN 15503 : 2009 | GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY |
| I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
| 11/30251971 DC : 0 | BS EN 12041 - FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 07/30163506 DC : 0 | BS ISO 20474-13 - EARTH-MOVING MACHINERY - SAFETY - PART 13: REQUIREMENTS FOR ROLLERS |
| BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
| 10/30216247 DC : 0 | BS EN 60335-2-67 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE |
| 09/30181670 DC : 0 | BS EN 13035-7:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| 09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| PREN ISO 11200 : DRAFT 2012 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
| BS EN 13035-11 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| CEI EN 60335-2-67 : 2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE |
| CEI EN 60745-2-16 : 2011 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR TACKERS |
| UNI EN 12012-4 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| ISO 10517:2009 | Powered hand-held hedge trimmers Safety |
| DIN EN 15774:2011-10 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| ISO 10494:1993 | Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method |
| DIN EN 15861:2013-06 | Food processing machinery - Smokehouses - Safety and hygiene requirements |
| DIN EN 14886 E : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| DIN EN 16486:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| BS EN 50570:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers |
| BS EN 12042:2014 | Food processing machinery. Automatic dough dividers. Safety and hygiene requirements |
| I.S. EN 16486:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| 15/30304107 DC : DRAFT MAY 2015 | BS EN 13684 - GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| I.S. EN ISO 3740:2000 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| CSA ISO 9703-2 : 0 | ANAESTHESIA AND RESPIRATORY CARE ALARM SIGNALS - PART 2: AUDITORY ALARM SIGNALS |
| I.S. EN 12649:2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| CEI EN 50569 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| BS EN 50416 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| I.S. EN 16500:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 50570:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| BS EN 60335-2-75 : 2004 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| 16/30342849 DC : 0 | BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| BS EN 16230-1 : 2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| I.S. EN 15861:2012 | FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 10517:2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009) |
| ISO 8124-1:2018 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
| ISO 5395-1:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| 17/30362886 DC : 0 | BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS |
| 17/30354108 DC : 0 | BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 16/30322398 DC : 0 | BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS |
| NF EN ISO 19085-1 : 2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNE-EN 16500:2015 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| UNE-EN ISO 19085-1:2018 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
| 16/30314039 DC : 0 | BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| BS EN 50569:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric spin extractors |
| UNE-EN 15997:2013 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
| EN ISO 4254-1:2015 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
| PREN 16770 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 1114-3:2001 | RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| DIN EN 1673:2010-10 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 12409:2011-12 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| DIN EN 14910 E : 2009 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| DIN EN 415-7:2009-12 | Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008) |
| DIN EN 14985 E : 2012 | CRANES - SLEWING JIB CRANES |
| DIN EN 415-5:2010-04 | Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009) |
| DIN EN ISO 9902-4 E : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 13288:2010-10 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 13525:2010-05 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| DIN EN ISO 9906 E : 2013 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| DIN EN ISO 22868:2011-06 | Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011); German version EN ISO 22868:2011 |
| DIN EN 14238 E : 2010 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| DIN EN 12852:2011-02 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13683:2013-08 | Garden equipment - Integrally powered shredders/chippers - Safety |
| DIN EN ISO 9902-1 E : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 500-6:2009-05 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS |
| DIN EN 13591:2010-10 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 12012-3:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| DIN EN ISO 11200:2014-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
| DIN EN 13418:2013-08 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| DIN EN 13570:2011-02 | Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13389:2010-10 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009) |
| BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| BS EN 13570 : 2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 500-6 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS |
| BS EN 786 : 1996 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| BS EN ISO 19432:2012 | Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements |
| BS EN 13035-3 : 2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| UNE-EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 13954 : 2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| BS EN 12852 : 2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 500-4:2011 | Mobile road construction machinery. Safety Specific requirements for compaction machines |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| UNE-EN ISO 11205:2010 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| BS EN 13418:2013 | Plastics and rubber machines. Winding machines for film or sheet. Safety requirements |
| UNE-EN 60335-2-69:2013 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
| ISO 11205:2003 | Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| BS EN ISO 11690-2:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures |
| BS EN 14462:2015 | Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3 |
| ISO 9902-3:2001 | Textile machinery — Noise test code — Part 3: Nonwoven machinery |
| BS EN 454:2014 | Food processing machinery. Planetary mixers. Safety and hygiene requirements |
| DIN EN 13042-1:2010-04 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009) |
| BS EN 13886 : 2005 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12409 : 2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| BS EN ISO 9902-3 : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY |
| BS EN 12853 : 2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| BS EN ISO 4254-1:2015 | Agricultural machinery. Safety General requirements |
| BS EN 15067:2007 | Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 1678 : 1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1673 : 2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12463:2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| EN 13870:2015 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| I.S. EN 13871:2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| EN 12463:2014 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| I.S. EN 14910:2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| I.S. EN 13570:2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 4871:2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| I.S. EN 454:2014 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 12545:2000+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 60745-2-16:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR TACKERS |
| EN 1265:1999+A1:2008 | Safety of machinery - Noise test code for foundry machines and equipment |
| EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| DIN EN 15067:2008-03 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
| EN 1114-1:2011 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
| EN 12012-4:2006+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory |
| EN 12469:2000 | Biotechnology - Performance criteria for microbiological safety cabinets |
| DIN EN ISO 9902-1:2001-07 | TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014) |
| EN ISO 22868:2011 | Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
| ONORM EN 12463 : 2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 13020:2015 | Road surface treatment machines - Safety requirements |
| EN 15997:2011/AC:2012 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 9902-2:2001-07 | TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014) |
| EN 13112:2002+A1:2009 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
| DIN EN 1114-3:2010-01 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| EN 16228-7:2014 | Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment |
| EN 12852:2001+A1:2010 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| DIN EN 1114-2:2010-01 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| EN 13208:2003+A1:2010 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
| EN 12043:2014 | Food processing machinery - Intermediate provers - Safety and hygiene requirements |
| EN 50636-2-94:2014 | Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears |
| EN 12041:2014 | Food processing machinery - Moulders - Safety and hygiene requirements |
| EN 13035-7:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 13114:2002+A1:2009 | Tannery machines - Rotating process vessels - Safety requirements |
| EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| EN 12268:2014 | Food processing machinery - Band saw machines - Safety and hygiene requirements |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| UNI EN 12463 : 2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 4871:2009-11 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 12012-2:2001+A2:2008 | Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers |
| EN 13035-6:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
| EN 1114-2:1998+A1:2008 | Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers |
| EN 13113:2002+A1:2010 | Tannery machines - Roller coating machines - Safety requirements |
| EN 50636-2-100:2014 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
| EN 12854:2003+A1:2010 | Food processing machinery - Beam mixers - Safety and hygiene requirements |
| EN 13035-9:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
| EN 12649:2008+A1:2011 | Concrete compactors and smoothing machines - Safety |
| EN 13042-1:2007+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder |
| EN 12012-3:2001+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 50570:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| I.S. EN 1501-4:2007 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 4: NOISE TEST CODE FOR REFUSE COLLECTION VEHICLES |
| OVE/ONORM EN 50636-2-91 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS (IEC 60335-2-91:2008, MODIFIED) |
| ONORM EN 12355 : 2011 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| NF EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| EN 50144-2-16:2003 | Safety of hand-held electric motor operated tools - Part 2-16: Particular requirements for tackers |
| OVE/ONORM EN 50636-2-92 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS (IEC 60335-2-92:2002, MODIFIED + COR.: 2003) |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| I.S. EN 16252:2012 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| BS EN 691-1:2012 | Safety of woodworking machines Common requirements |
| 10/30236476 DC : 0 | BS ISO/IEC 21118 - INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - DATA PROJECTORS |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS ISO 18564:2016 | Machinery for forestry. Noise test code |
| BS EN 415-9:2009 | Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| ISO 13105-2:2014 | Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification |
| 15/30326831 DC : 0 | BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| IEC 60335-2-107:2017 | Household and similar electrical appliances - Safety - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers |
| 11/30249083 DC : 0 | BS EN 60335-2-58:2005/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| UNE-EN 13684:2005 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 16500 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| 11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| CSA M4254.1 : 2007 | AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 62075:2012 | Audio/video, information and communication technology equipment. Environmentally conscious design |
| 16/30277594 DC : 0 | BS ISO 20474-13 - EARTH-MOVING MACHINERY - SAFETY - PART 13: REQUIREMENTS FOR ROLLERS |
| 17/30341100 DC : 0 | BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
| 14/30285286 DC : 0 | BS EN 14439 - CRANES - SAFETY - TOWER CRANES |
| 14/30302844 DC : 0 | BS EN 60335-2-72 ED 3.0/AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE |
| 12/30260942 DC : 0 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 1672-1 : DRAFT 2012 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| UNI EN 13035-11 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| BS EN 50636-2-100:2014 | Household and similar electrical appliances. Safety Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
| I.S. EN 15503:2009 | GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY |
| 14/30274816 DC : 0 | BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| 09/30211102 DC : 0 | BS EN 60335-2-107 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 107: PARTICULAR REQUIREMENTS FOR ROBOTIC LAWNMOWERS |
| 13/30291469 DC : 0 | BS EN 13870 - FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS ISO 9296:2017 | Acoustics. Declared noise emission values of information technology and telecommunications equipment |
| 09/30181673 DC : 0 | BS EN 13035-9:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| BS EN 16500:2014 | Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
| PREN 1114-3 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| 12/30259421 DC : 0 | BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 03/111126 DC : DRAFT JULY 2003 | PREN 60335-2-75 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| 12/30255086 DC : 0 | BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 14958 E : 2010 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
| UNE-EN 691-1:2013 | Safety of woodworking machines - Part 1: Common requirements |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| 11/30251968 DC : 0 | BS EN 454 - FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 18738-2:2012 | Measurement of ride quality Part 2: Escalators and moving walks |
| 15/30295265 DC : 0 | BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| UNI EN ISO 10821 : 2010 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| 12/30259995 DC : 0 | BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| PREN 12012-1 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| 14/30279098 DC : 0 | BS ISO 18564 - MACHINERY FOR FORESTRY - NOISE TEST CODE |
| 12/30270038 DC : 0 | BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| DIN EN ISO 11553-3:2013-07 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013) |
| BS ISO 6394:2008 | Earth-moving machinery. Determination of emission sound pressure level at operator\'s position. Stationary test conditions |
| 09/30181664 DC : 0 | BS EN 13035-4:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| BS ISO/IEC 21118:2012 | Information technology. Office equipment |
| BS EN 16743:2016 | Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
| BS EN 16486:2014 | Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 14462 : DRAFT 2012 | SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| 17/30359986 DC : 0 | BS EN ISO 7779 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
| NF EN ISO 10517 : 2009 AMD 1 2013 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| ANSI S12.10:2002(R2007) | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| BS 7140:1995 | Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines |
| CEI EN 60335-2-69 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE |
| I.S. EN 60745-2-16:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR TACKERS |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 15861 E : 2013 | FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13035-7:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009) |
| ISO 18564:2016 | Machinery for forestry Noise test code |
| DIN EN 15997:2012-10 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 16252 : 2013 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| DIN EN 13035-1 E : 2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY |
| UNI EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| IEC 60335-2-91:2008 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| I.S. EN 12999:2011 | CRANES - LOADER CRANES |
| BS EN 13035-7 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| BS EN 12733 : 2001 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 16704-2-1:2016 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGIES - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS) |
| I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| I.S. EN 50636-2-91:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
| BS EN 60335-2-69:2012 | Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| ISO 3743-2:2018 | Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms |
| PREN 12041 : DRAFT 2011 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 50570 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| ECMA 370 : 5ED 2015 | TED - THE ECO DECLARATION |
| I.S. EN 50636-2-92:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS |
| ANSI/ASA S12.54/ISO 3744 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| I.S. EN 13035-1:2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY |
| UNI EN 415-9 : 2010 | SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3 |
| DIN EN 12042:2014-07 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 691-1:2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNE-EN 15861:2013 | Food processing machinery - Smokehouses - Safety and hygiene requirements |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN ISO 7779 : 2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| UNI EN 12042 : 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 50569:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors |
| DIN EN 12999:2013-02 | CRANES - LOADER CRANES |
| EN 12999:2011+A2:2018 | Cranes - Loader cranes |
| UNI EN 15774 : 2011 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 289 : DRAFT 2012 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN ISO 9612:2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| UNI EN 71-1 : 2015 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| EN ISO 3740:2000 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
| EN ISO 5395-1:2013/A1:2018 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS - AMENDMENT 1: ANNEX G (VIBRATION TEST CODE - HAND-ARM VIBRATION AND WHOLE-BODY VIBRATION) (ISO 5395-1:2013/AMD 1:2017) |
| BS EN ISO 3740:2001 | Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 1494:2009-05 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| DIN EN 1678:2011-02 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12268:2015-01 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13000:2014-11 | CRANES - MOBILE CRANES |
| DIN EN 13114:2010-03 | Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009) |
| DIN EN 1674:2015-12 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13112:2011-03 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009) |
| DIN EN ISO 9902-7 E : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY (ISO 9902-7:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 12463:2015-02 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 12301:2015-12 (Draft) | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| DIN EN 1547:2010-02 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009) |
| DIN EN ISO 4254-1:2016-09 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
| DIN EN 14957 E : 2010 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1417:2015-03 | Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014 |
| DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
| DIN EN 1265:2009-07 | SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT |
| DIN EN 15027 E : 2010 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| DIN EN ISO 9902-3 E : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 12159:2013-03 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| DIN EN 14462 E : 2015 | SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| DIN EN 12001:2012-11 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 12041:2015-02 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 536:2016-01 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 15027:2010-03 | Transportable wall saw and wire saw equipment for job site - Safety (includes Amendment A1:2009) |
| DIN EN 14439:2010-03 | Cranes - Safety - Tower cranes (includes Amendment A2:2009) |
| DIN EN 14910:2009-08 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| DIN EN 13035-4:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (includes Amendment A1:2009) |
| DIN EN 14655:2010-11 | Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13042-1 E : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER |
| DIN EN 13042-5 E : 2009 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS -SAFETY REQUIREMENTS - PART 5: PRESSES |
| DIN EN ISO 9902-5:2014-10 | TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 13035-3:2010-02 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| DIN EN 14238:2010-02 | Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009) |
| BS EN 774:1996 | Garden equipment. Hand held, integrally powered hedge trimmers. Safety |
| DIN EN ISO 9902-3:2014-10 | TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014) |
| UNE-EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 14238 : 2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| BS EN ISO 9902-2 : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY |
| BS EN ISO 22868:2011 | Forestry and garden machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy) |
| UNE-EN 60335-2-72:2013 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| BS EN ISO 11546-1:1996 | Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes) |
| BS EN 12043:2014 | Food processing machinery. Intermediate provers. Safety and hygiene requirements |
| ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
| BS EN ISO 3744:2010 | Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane |
| UNE-EN 13020:2016 | Road surface treatment machines - Safety requirements |
| DIN EN 13042-2:2009-12 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (includes Amendment A1:2009) |
| BS EN 13218 : 2002 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| UNE-EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| BS EN 836 : 1997 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| EN 16851:2017 | Cranes - Light crane systems |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| I.S. EN 13114:2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| I.S. EN ISO 22868:2011 | FORESTRY AND GARDENING MACHINERY - NOISE TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - ENGINEERING METHOD (GRADE 2 ACCURACY) |
| I.S. EN 13042-2:2004 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING |
| I.S. EN 289:2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN ISO 19432:2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| I.S. EN 13035-9:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| DIN EN 12012-2:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| I.S. EN 13954:2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 12001:2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE |
| I.S. EN ISO 21649:2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13288:2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13113:2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 13885:2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13042-5:2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES |
| I.S. EN 1846-2:2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| UNI EN 1673 : 2010 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| I.S. EN 14439:2006 | CRANES - SAFETY - TOWER CRANES |
| I.S. EN 14238:2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 786:1996 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| I.S. EN 1494:2000 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| I.S. EN ISO 3745:2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012) |
| ONORM EN 16564 : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN ISO 11204:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| ONORM EN 12042 : JUN 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13042-1:2007 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER |
| I.S. EN 500-3:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILISING MACHINES AND RECYCLING MACHINES |
| DIN EN ISO 11200:1996-07 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014) |
| I.S. EN 13886:2005 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13621:2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13035-3:2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| DIN EN 13218:2010-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| EN 1673:2000+A1:2009 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
| I.S. EN 12043:2014 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13035-4:2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 14957:2006 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1265:2000 | SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT |
| I.S. EN 13852-1:2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
| I.S. EN 13208:2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12409:2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| DIN EN ISO 7779:2011-01 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| I.S. EN 13732:2013 | FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
| I.S. EN ISO 9902-4:2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001) |
| DIN EN ISO 10517:2014-03 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009 + AMD 1:2013) |
| I.S. EN 13683:2003 | GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY |
| I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
| I.S. EN 1114-1:2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| I.S. EN 13418:2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| ONORM EN 15571 : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 1915-4:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| I.S. EN 453:2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| EN ISO 11690-1 : 1996 | ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES |
| DIN EN 13218:2002-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| I.S. EN 12355:2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12268:2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 500-2:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES |
| I.S. EN 1547:2001 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| I.S. EN 12852:2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 11546-1:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
| I.S. EN ISO 3744:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| I.S. EN ISO 11546-2:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
| I.S. EN 13591:2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 12545:2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS |
| I.S. EN 201:2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12041:2014 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1674:2015 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12012-3:2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| I.S. EN 15027:2007 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| I.S. EN 13389:2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| I.S. EN 13870:2015 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 9906:2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| I.S. EN 12012-2:2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| I.S. EN 415-5:2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| I.S. EN 12853:2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1417:2014 | PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| EN ISO 9902-6:2001/A2:2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001/AMD 2:2014) |
| I.S. EN 1114-2:1998 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| I.S. EN ISO 4254-1:2015 | AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013) |
| DIN EN ISO 10821:2013-02 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009) |
| I.S. EN 12854:2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 11205:2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY |
| I.S. EN ISO 2151:2008 | ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
| I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| ONORM EN 1673 : OCT 2010 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13112:2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 12012-2:2004-03 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| I.S. EN 500-4:2011 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES |
| I.S. EN 12001:2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| I.S. EN 14655:2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 500-6:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS |
| I.S. EN 1678:1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14462:2015 | SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| I.S. EN ISO 11202:2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
| DIN EN 957-6:2001-11 | STATIONARY TRAINING EQUIPMENT - PART 6: TREADMILLS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 957-6:2010 | STATIONARY TRAINING EQUIPMENT - PART 6: TREADMILLS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 3746:2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
| I.S. EN 13390:2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| I.S. EN 13020:2015 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| I.S. EN ISO 9902-6:2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001) |
| I.S. EN 415-7:2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| ONORM EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| I.S. EN 12053:2001 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS |
| I.S. EN 1673:2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 11689 : 1998 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
| UNI EN 500-4 : 2011 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES |
| UNI EN 453 : 2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13390 : 2010 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ONORM EN 13885 : 2011 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| OVE/ONORM EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS (IEC 60335-2-77:2002, MODIFIED) |
| ONORM EN 13732 : 2013 | FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
| DIN EN 15572 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| I.S. EN ISO 5395-1:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013) |
| DIN EN 16474 E : 2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| UNI EN 15861 : 2012 | FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 691-1 : 2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 415-9:2010-02 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| DIN EN ISO 9612 E : 2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| DIN EN 13035-7 E : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| UNI EN 415-8 : 2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| BS ISO 15664:2001 | Acoustics. Noise control design procedures for open plant |
| DIN EN 16252:2013-03 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| CEI EN 50571 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
| DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| BS ISO 13105-2 : 2014 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION |
| BS EN 60335-2-77:2010 | Safety of household and similar appliances Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| PREN 13871 : DRAFT 2012 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13379 : DRAFT 2016 | PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 12733:2016-08 (Draft) | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| BS EN ISO 9612:2009 | Acoustics. Determination of occupational noise exposure. Engineering method |
| 10/30211872 DC : 0 | BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNE-EN 16029:2013 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| 11/30246444 DC : 0 | BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| BS EN 60335-2-58 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| 11/30251965 DC : 0 | BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN 12999 : 2011 | CRANES - LOADER CRANES |
| ISO 8566-1:2010 | Cranes Cabins and control stations Part 1: General |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 16704-2-1:2016 | Railway applications. Track. Safety protection on the track during work Common solutions and technologies. Technical requirements for Track Warning Systems (TWS) |
| ECMA 109 : 7ED 2016 | DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| 14/30301841 DC : 0 | BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| UNE-EN 60335-2-77:2011 | Safety of household and similar appliances -- Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| BS EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory |
| PREN 13204 : DRAFT 2015 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| 17/30317170 DC : 0 | BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| 09/30181706 DC : 0 | BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 415-8:2008 | Safety of packaging machines Strapping machines |
| 09/30181679 DC : 0 | BS EN 13042-1:2007/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER |
| 11/30249027 DC : 0 | BS ISO 15442 - CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES |
| 07/30137110 DC : 0 | ISO 9612 - ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| I.S. EN 50636-2-100:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-100: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS |
| 11/30249086 DC : 0 | BS EN 60335-2-64:2000/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-64: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC KITCHEN MACHINES |
| 09/30181676 DC : 0 | BS EN 13035-11:2006/A - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| 05/30133728 DC : DRAFT MAY 2005 | EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 50571:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines |
| 00/562811 DC : DRAFT JUN 2000 | BS ISO 11205 - ACOUSTICS - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY |
| UNI EN ISO 10517 : 2014 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| I.S. EN 50571:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
| DIN EN 16743:2016-05 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 11553-3:2013 | Safety of machinery. Laser processing machines Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) |
| BS EN 50636-2-94:2014 | Household and similar electrical appliances. Safety Particular requirements for scissors type grass shears |
| 06/30139190 DC : DRAFT MAR 2006 | ISO 8124-1 AMD 2 - SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 50434:2014 | Safety of household and similar appliances. Particular requirements for mains operated shredders and chippers |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| UNE-EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| 12/30260302 DC : 0 | BS EN 12268 - FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| 08/30182209 DC : DRAFT SEP 2008 | BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| BS EN 50636-2-92:2014 | Household and similar electrical appliances. Safety Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| 08/30183861 DC : DRAFT SEP 2008 | BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
| UNE-EN 71-1:2015 | Safety of toys - Part 1: Mechanical and physical properties |
| UNI EN 15895 : 2011 | CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS |
| 07/30169701 DC : 0 | EN ISO 28139 - AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION ENGINE DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS |
| 09/30182215 DC : 0 | BS EN 12001:2003/A1 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 16474:2015-08 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| BS EN 13035-6 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| 04/301784 DC : DRAFT JAN 2004 | EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES |
| UNE-EN 16228-7:2015 | Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment |
| BS EN 60335-2.77 : 2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| ANSI S12.10 : 2002 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| DIN EN 13035-6 E : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| UNI EN ISO 5395-1 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS |
| EN 16252:2012 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| PREN 71-1 : DRAFT 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
| EN 50569:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| IEC 60335-2-69:2016 RLV | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
| S.R. CEN ISO/TR 22100-1:2017 | SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015) |
| I.S. EN 14958:2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14958 : 2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50636-2-107:2015 | Safety of household and similar appliances Particular requirements for robotic battery powered electrical lawnmowers |
| EN ISO 10517:2009/A1:2013 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009/AMD 1:2013) |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 50636-2-94:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| I.S. EN 16228-7:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 7: INTERCHANGEABLE AUXILIARY EQUIPMENT |
| I.S. EN 50416:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| I.S. EN 16743:2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13684:2004 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| 16/30338566 DC : 2016-06 | BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| EN 15895:2011+A1:2018 | Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools |
| ISO/IEC 21118:2012 | Information technology Office equipment Information to be included in specification sheets Data projectors |
| EN 12042 : 2014 COR 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| EN 50636-2-107 : 2015 AMD 1 2018 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| DIN EN 13684:2015-05 (Draft) | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| BS EN ISO 7779:2010 | Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment |
| ONORM EN 12733 : 2011 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| ISO 16089:2015 | Machine tools Safety Stationary grinding machines |
| ASTM F 963 : 2017 : REDLINE | Standard Consumer Safety Specification for Toy Safety |
| PREN 1459-1 : DRAFT 2014 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| PREN 12301 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| PREN 60335-2-72 : DRAFT 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE |
| UNI EN 13035-7 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| EN ISO 19085-1:2017/AC:2018 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
| ONORM EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| ISO 9296:2017 | Acoustics — Declared noise emission values of information technology and telecommunications equipment |
| UNI EN 12733 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| DIN EN 71-1:2015-02 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| NF EN ISO 7779 : 2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| UNI EN 12012-1 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| ISO 7779:2010 | Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment |
| I.S. EN 12301:2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
| IEC 60335-2-94:2008 | Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears |
| IEC 60335-2-69:2016 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
| I.S. EN 14886:2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| BS EN 13684 : 2004 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| ISO 20474-13:2017 | Earth-moving machinery — Safety — Part 13: Requirements for rollers |
| DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
| DIN EN 13208:2011-02 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12853:2012-02 | Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12355:2011-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12649:2011-09 | Concrete compactors and smoothing machines - Safety |
| DIN EN ISO 9902-5 E : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 1915-4:2009-06 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| DIN EN 12545:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements (includes Amendment A1:2009) |
| DIN EN 13020:2016-02 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| DIN EN 12854:2010-12 | Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13113:2011-05 | Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010) |
| DIN EN 13035-3 E : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| DIN EN 786:2012-01 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| DIN EN 13035-9 E : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| DIN EN 13954:2010-12 | Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| DIN EN ISO 19432 E : 2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| DIN EN 13870:2015-12 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| DIN EN 454:2015-02 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| DIN EN 13885:2011-02 | Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 15067 E : 2008 | PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS |
| UNI EN ISO 11202 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS |
| DIN EN 14655 E : 2010 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 12043:2015-02 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13035-9:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010) |
| DIN EN 14462:2015-08 | SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| DIN EN 12053:2009-07 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS |
| ISO 11546-1:1995 | Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes) |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| BS EN 1417:2014 | Plastics and rubber machines. Two-roll mills. Safety requirements |
| ISO 9612:2009 | Acoustics Determination of occupational noise exposure Engineering method |
| BS EN 1114-2 : 1998 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| UNE-EN ISO 11203:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
| BS EN 12355 : 2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| UNE-EN 60335-2-67:2013 | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use |
| BS EN 957-6 : 2010 | STATIONARY TRAINING EQUIPMENT - PART 6: TREADMILLS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN ISO 9906:2012 | Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
| DIN EN ISO 9906:2013-03 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| DIN EN 13042-2 E : 2009 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING |
| DIN EN 14957:2010-11 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010) |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 12649 : 2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| ONORM EN 13525 : 2010 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| ASA/ANSI S12.10 PART 2:2011(R2020) | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 2: DECLARATION OF NOISE EMISSION LEVELS |
| UNI EN 13525 : 2010 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| ANSI/ASA S12.10 PART 1:2010(R2020) | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL |
| UL 60335-2-67:1ED 2017-12 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
| UL 60335-2-72:1ED 2017-09 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
| UNI EN ISO 11203 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
| I.S. EN ISO 11203:2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
| EN 16486:2014 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
| EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
| EN ISO 19432:2012 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| UNI EN 13042-2 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING |
| UNI EN 12001 : 2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| UNI EN 14655 : 2010 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 13035-9 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| UNI EN 1265 : 2009 | SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT |
| UNI EN 786 : 2010 | GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY |
| UNI EN 13288 : 2010 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 3744 : 2010 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| UNI EN 13035-4 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| UNI EN 500-3 : 2009 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILISING MACHINES AND RECYCLING MACHINES |
| UNI EN 13683 : 2011 | GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY |
| UNI EN 13042-1 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER |
| UNI EN 1846-2 : 2013 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| UNI EN 500-2 : 2009 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES |
| UNI EN 14957 : 2010 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13113 : 2010 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12854 : 2010 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1114-3 : 2009 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| UNI EN ISO 11205 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY |
| UNI EN ISO 11204 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| UNI EN 12545 : 2009 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS |
| UNI EN 14910 : 2010 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 12053 : 2008 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS |
| ONORM EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 13621 : 2010 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13886 : 2010 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNI EN 13954 : 2010 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 15027 : 2009 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| UNI EN 1114-2 : 2008 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 13208 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1114-1 : 2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| UNI EN 15067 : 2008 | PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS |
| UNI EN ISO 12001 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE |
| UNI EN ISO 9902-2 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY |
| UNI EN 13035-3 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| UNI EN ISO 4871 : 2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| UNI EN 12852 : 2010 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13871 : 2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12649 : 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| UNI EN 14439 : 2009 | CRANES - SAFETY - TOWER CRANES |
| UNI EN 13389 : 2010 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 9906 : 2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
| UNI EN 201 : 2010 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12012-3 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| UNI EN 13418 : 2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| ONORM EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNI EN ISO 9902-7 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY |
| UNI EN 13112 : 2010 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| UNI EN ISO 3746 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
| UNI EN ISO 9902-3 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| UNI EN 996 : 2009 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN ISO 9902-5 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY |
| UNI EN ISO 9902-1 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS |
| UNI EN 12043 : 2015 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 19432 : 2013 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 415-5 : 2010 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| UNI EN 1678 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13885 : 2010 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1915-4 : 2012 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| UNI EN 454 : 2015 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 957-6 : 2014 | STATIONARY TRAINING EQUIPMENT - PART 6: TREADMILLS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 9902-4 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY |
| UNI EN 12409 : 2011 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12041 : 2015 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13218 : 2008 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 14238 : 2009 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| UNI EN 836 : 2011 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| UNI EN 13042-5 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES |
| UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
| UNI EN ISO 2151 : 2008 | ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
| EN 500-3:2006+A1:2008 | Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines |
| EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| UNI EN 13852-1 : 2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNI EN ISO 11546-1 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| UNI EN 12853 : 2010 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 500-6 : 2009 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 1494 : 2009 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| UNI EN 12012-2 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| UNI EN 14886 : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
| UNI EN 12268 : 2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ONORM EN 16228-7 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 7: INTERCHANGEABLE AUXILIARY EQUIPMENT |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 12355 : 2010 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13570 : 2010 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 415-7 : 2008 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| UNI EN ISO 11546-2 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
| UNI EN 14958 : 2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 289 : 2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 13591 : 2010 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| ONORM EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| UNI EN 13114 : 2010 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| UNI EN 1547 : 2009 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| BS ISO 15442:2012+A1:2015 | Cranes. Safety requirements for loader cranes |
| ONORM EN 12999 : 2013 | CRANES - LOADER CRANES |
| DIN EN ISO 11202:2010-10 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ONORM EN ISO 9902-6 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014) |
| 18/30369931 DC : 0 | BS EN ISO 9902-6 - TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 60335-2-72:2012 | Household and similar electrical appliances. Safety Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| DIN EN 12012-1:2015-05 (Draft) | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| 04/30124330 DC : 0 | EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS |
| 14/30291684 DC : 0 | BS ISO 9296 - ACOUSTICS - DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS |
| UNI EN 16228-7 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 7: INTERCHANGEABLE AUXILIARY EQUIPMENT |
| 99/710387 DC : DRAFT JUN 99 | EN ISO 15744 - HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
| UNI EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| 15/30296047 DC : 0 | BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS |
| DIN EN ISO 3744:2011-02 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| BS EN 50636-2-91:2014 | Household and similar electrical appliances. Safety Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| 02/706849 DC : DRAFT MAY 2002 | BS EN 1915-4 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS |
| 13/30255092 DC : 0 | BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| BS EN 60745-2-16:2010 | Hand-held motor-operated electric tools. Safety Particular requirements for tackers |
| BS EN 12012-1 : 2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| 14/30302140 DC : 0 | BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| 10/30207841 DC : 0 | BS EN 500-4 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES |
| PREN 13684 : DRAFT 2015 | GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY |
| 10/30216251 DC : 0 | BS EN 60335-2-68 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES FOR COMMERCIAL USE |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| 10/30216260 DC : 0 | BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
| 07/30172338 DC : DRAFT DEC 2007 | BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| 08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN ISO 7779:2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| DIN EN 16029:2012-08 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
| PREN 13870 : DRAFT 2013 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| 11/30232159 DC : 0 | BS EN ISO 4254-1 - AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13035-2:2008-10 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY |
| 14/30293310 DC : 0 | BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| 12/30268301 DC : 0 | BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| 02/560773 DC : DRAFT FEB 2002 | BS EN ISO 11205.2 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY |
| DIN EN 15503:2016-04 | GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY |
| DIN EN 15571 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 10/30216256 DC : 0 | BS EN 60335-2-69 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE |
| 17/30356590 DC : DRAFT AUG 2017 | BS ISO 10494 - TURBINES AND TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD |
| BS EN 16851:2017 | Cranes. Light crane systems |
| PREN 15180 : DRAFT 2011 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 60335-2-69:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH FOR COMMERCIAL USE (IEC 60335-2-69:2012 (MOD)) |
| 09/30181661 DC : 0 | BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| DIN EN 16500:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| ANSI S12.54:2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| 11/30251974 DC : 0 | BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| BS EN 14886:2008 | Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements |
| PREN 13525 : DRAFT 2016 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
| CSA C22.2 No. 60335-2-67 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE |
| 04/30117319 DC : 0 | BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE |
| DIN EN 13035-6:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009) |
| DIN EN 16500 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| UNI EN 16029 : 2012 | RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN ISO 19085-1:2017 | Woodworking machines. Safety Common requirements |
| BS EN 71-1 : 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| ANSI S12.50 : 2002 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
| I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| DIN EN ISO 11204:2010-10 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS |
| PREN 1459-7 : DRAFT 2017 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION |
| PREN 13378 : DRAFT 2016 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| CEN ISO/TR 22100-1:2017 | Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015) |
| I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
| PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| I.S. EN 16029:2012 | RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
| 14/30301874 DC : 0 | BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
| PD CEN ISO/TR 22100-1:2017 | Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards |
| EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| CEI EN 50636-2-92 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS |
| UNE-EN 12999:2011 | Cranes - Loader cranes |
| DIN EN ISO 5395-1:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013) |
| CEI EN 60335-2-72 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE |
| ECMA/TR 107 : 3ED 2017 | AN OPTIONAL ALTERNATE BACKGROUND NOISE CORRECTION SENSITIVE TO THE STEADINESS OF BACKGROUND NOISE |
| PREN 454 : DRAFT 2011 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 12042 : DRAFT 2011 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| BS EN ISO 5395-1 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013) |
| ISO/TR 22100-1:2015 | Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards |
| ISO 10843:1997 | Acoustics — Methods for the description and physical measurement of single impulses or series of impulses |
| EN 12012-1:2007+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
| IEC 60335-2-72:2016 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| ISO 16368:2010 | Mobile elevating work platforms Design, calculations, safety requirements and test methods |
| BS EN 12301 : 2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| IEC 60335-2-67:2012+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse |
| I.S. EN 62075:2012 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV)) |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| I.S. EN 13035-7:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS |
| I.S. EN 71-1:2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| I.S. EN 60335-2-58:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| EN 13035-3:2003 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
| EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| I.S. EN ISO 11200:2014 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012) |
| ONORM EN 12301 : 2009 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| DIN EN ISO 9902-2 E : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN ISO 9902-6 E : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN ISO 21649 E : 2010 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| DIN EN 500-3:2009-05 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILISING MACHINES AND RECYCLING MACHINES |
| DIN EN 13732:2013-10 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
| DIN EN 201:2010-02 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN ISO 11689:1997-03 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT |
| DIN EN 14439:2010-03 | CRANES - SAFETY - TOWER CRANES |
| DIN EN ISO 2151:2009-01 | ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
| DIN EN 13886:2011-02 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1114-1:2012-01 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| DIN EN 13852-1:2014-01 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| DIN EN 1114-3:2015-12 (Draft) | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| DIN EN 836:2012-07 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| 12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 2151:2004 | Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2) |
| BS EN 415-5 : 2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| BS EN 13885 : 2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 14655:2006 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| BS EN ISO 11689 : 1997 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
| ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
| UNE-EN 15503:2010 | Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety |
| BS EN ISO 10821 : 2005 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| BS EN 453:2014 | Food processing machinery. Dough mixers. Safety and hygiene requirements |
| ISO 19432:2012 | Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements |
| BS EN 13683 : 2003 | GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY |
| BS EN ISO 9902-7 : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY |
| ISO 10821:2005 | Industrial sewing machines Safety requirements for sewing machines, units and systems |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| BS EN 13525 : 2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 13389 : 2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13621 : 2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13871:2014 | Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements |
| BS EN 13035-4 : 2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| ISO 11553-3:2013 | Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) |
| BS EN 12268:2014 | Food processing machinery. Band saw machines. Safety and hygiene requirements |
| BS EN 1547 : 2001 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT |
| DIN EN ISO 9902-6:2014-10 | Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001 + Amd 1:2009 + Amd 2:2014) |
| BS EN 12463:2014 | Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| BS EN 12053 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS |
| ISO 4254-1:2013 | Agricultural machinery — Safety — Part 1: General requirements |
| BS EN ISO 11690-1:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies |
| BS EN ISO 9902-5 : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY |
| ISO 9902-5:2001 | Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery |
| BS EN 13208 : 2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 13288:2006 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| BS EN 13112 : 2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| BS EN ISO 11546-2:2009 | Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes) |
| EN 13525:2005+A2:2009 | Forestry machinery - Wood chippers - Safety |
| BS EN 1501-4:2007 | Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Noise test code for refuse collection vehicles |
| BS EN 1553:2000 | Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements |
| BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| BS EN 1674:2015 | Food processing machinery. Dough sheeters. Safety and hygiene requirements |
| BS EN 12012-3 : 2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| UNE-EN 12649:2009 | Concrete compactors and smoothing machines - Safety |
| UNI EN ISO 11200 : 2014 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
| ISO 9902-1:2001 | Textile machinery — Noise test code — Part 1: Common requirements |
| BS EN 201:2009 | Plastics and rubber machines. Injection moulding machines. Safety requirements |
| BS EN 500-2 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES |
| BS EN 13042-1 : 2007 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER |
| BS EN 1915-4 : 2004 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| DIN EN ISO 9902-4:2014-10 | TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014) |
| BS EN 1746:1999 | Safety of machinery. Guidance for the drafting of the noise clauses of safety standards |
| BS EN 996 : 1996 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNE-EN 12001:2013 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
| ISO 12001:1996 | Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code |
| CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 500-4:2011 | Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
| UNE-EN 13114:2002 | Tannery machines- Rotating process vessels - Safety requirements. |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| BS EN 13288 : 2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 9902-1 : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS |
| BS EN 12041:2014 | Food processing machinery. Moulders. Safety and hygiene requirements |
| BS EN 415-7 : 2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| UNE-EN 454:2015 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| UNE-EN ISO 19432:2013 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| BS EN ISO 9902-6 : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY |
| BS EN 1265 : 1999 | SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT |
| ISO 9902-4:2001 | Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery |
| UNE-EN ISO 3744:2011 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| BS EN 12545 : 2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS |
| UNE-EN ISO 12001:2010 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| UNE-EN 1846-2:2011 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
| UNE-EN ISO 11546-2:2010 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| IEC 62075:2012 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO 22868:2011 | Forestry and gardening machinery Noise test code for portable hand-held machines with internal combustion engine Engineering method (Grade 2 accuracy) |
| ISO 9902-7:2001 | Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery |
| UNI EN 12301 : 2008 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| ISO 9902-2:2001 | Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery |
| BS EN 13035-9 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| BS EN ISO 3746:2009 | Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane |
| UNE-EN 50571:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
| BS EN 15027 : 2007 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| UNE-EN 13112:2002 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements. |
| BS EN 12469:2000 | Biotechnology. Performance criteria for microbiological safety cabinets |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 12409:2009 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| ISO 9902-6:2001 | Textile machinery Noise test code Part 6: Fabric manufacturing machinery |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| BS EN 13114 : 2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| DIN EN ISO 19432:2012-12 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| UNE-EN 13591:2006 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| BS EN ISO 11204:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| BS EN ISO 11200:2014 | Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| BS EN 13042-5 : 2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES |
| I.S. EN 13525:2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 13113 : 2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| BS EN 1114-3 : 2001 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| ISO 11546-2:1995 | Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes) |
| BS EN 1846-2 : 2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| BS EN 13870:2015 | Food processing machinery. Portion cutting machines. Safety and hygiene requirements |
| UNE-EN 13525:2005 | Forestry machinery - Wood chippers - Safety |
| BS EN 14439 : 2006 | CRANES - SAFETY - TOWER CRANES |
| BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
| BS EN ISO 4871:2009 | Acoustics. Declaration and verification of noise emission values of machinery and equipment |
| UNE-EN 13389:2006 | Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements. |
| UNE-EN 13871:2015 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| BS EN 1494 : 2001 | MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT |
| BS EN ISO 12001:2009 | Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code |
| UNE-EN ISO 10517:2010 | Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
| BS EN 13591 : 2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 13870:2016 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| UNE-EN 50570:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers |
| BS EN 12854 : 2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 13113:2002 | Tannery machines - Roller coating machines - Safety requirements. |
| UNE-EN ISO 4871:2010 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| UNE-EN 1114-1:2012 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| UNE-EN 13852-1:2014 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| DIN EN ISO 9902-1:2014-10 | TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 13042-5:2009-12 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (includes Amendment A1:2009) |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| EN 1417:2014 | Plastics and rubber machines - Two-roll mills - Safety requirements |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 691-1:2012 | Safety of woodworking machines - Part 1: Common requirements |
| EN ISO 9902-3:2001/A2:2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001/AMD 2:2014) |
| EN 13885:2005+A1:2010 | Food processing machinery - Clipping machines - Safety and hygiene requirements |
| EN 15503:2009+A2:2015 | Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
| EN 15774:2010 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 15067:2007 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
| EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| EN 1494:2000+A1:2008 | Mobile or movable jacks and associated lifting equipment |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 415-7:2006+A1:2008 | Safety of packaging machines - Part 7: Group and secondary packaging machines |
| EN ISO 3745:2012/A1:2017 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017) |
| EN 15027:2007+A1:2009 | Transportable wall saw and wire saw equipment for job site - Safety |
| EN ISO 2151:2008 | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) |
| EN ISO 9902-2:2001/A2:2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001/AMD 2:2014) |
| EN 415-8:2008 | Safety of packaging machines - Part 8: Strapping machines |
| EN 13683:2003+A2:2011/AC:2013 | GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 14910:2007+A1:2009 | Garden equipment - Walk-behind combustion engine powered trimmers - Safety |
| EN ISO 9612:2009 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
| EN 1547:2001+A1:2009 | Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 16029:2012 | Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
| EN 957-6:2010+A1:2014 | Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods |
| EN 14238:2004+A1:2009 | Cranes - Manually controlled load manipulating devices |
| EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN 13591:2005+A1:2009 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| EN 14957:2006+A1:2010 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN 453:2014 | Food processing machinery - Dough mixers - Safety and hygiene requirements |
| EN ISO 11689:1996/AC:2009 | Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007) |
| EN ISO 10821:2005/A1:2009 | Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01) |
| EN 500-2:2006+A1:2008 | Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines |
| EN 454:2014 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| EN ISO 9902-1:2001/A2:2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001/AMD 2:2014) |
| EN 16704-2-1:2016 | Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS) |
| EN 13621:2004+A1:2010 | Food processing machinery - Salad dryers - Safety and hygiene requirements |
| EN 13954:2005+A1:2010 | Food processing machinery - Bread slicers - Safety and hygiene requirements |
| EN 13218:2002+A1:2008/AC:2010 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| EN 14492-1:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN 15333-1:2006/AC:2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| EN ISO 11553-3:2013 | Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) |
| EN 774:1996/A3:2001 | GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| EN 1915-4:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 500-6:2006+A1:2008 | Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers |
| EN 13871:2014 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| EN ISO 9906:2012 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
| EN ISO 11546-1:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| ONORM EN 13870 : 2015 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 14439:2006+A2:2009 | Cranes - Safety - Tower cranes |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN 13035-4:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
| EN ISO 11546-2:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| EN 14462:2015 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
| EN 13732:2013 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
| EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| EN ISO 9902-7:2001/A2:2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY (ISO 9902-7:2001/AMD 2:2014) |
| EN 13042-5:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses |
| EN 14886:2008 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 14655:2005+A1:2010 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| EN 415-5:2006+A1:2009 | Safety of packaging machines - Part 5: Wrapping machines |
| EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| EN 1501-4:2007 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles |
| EN 16230-1:2013+A1:2014 | Leisure karts - Part 1: Safety requirements and test methods for karts |
| EN 15861:2012 | Food processing machinery - Smokehouses - Safety and hygiene requirements |
| EN 14492-2:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
| EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| EN 415-9:2009 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
| EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
| EN 786:1996+A2:2009 | Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 13886:2005+A1:2010 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| EN 13390:2002+A1:2009 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
| EN ISO 9902-4:2001/A2:2014 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014) |
| EN ISO 11205:2009 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
| EN 500-4:2011 | Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
| EN 1846-2:2009+A1:2013 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
| EN 1678:1998+A1:2010 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
| EN 836:1997+A4:2011 | Garden equipment - Powered lawnmowers - Safety |
| EN ISO 9902-5:2001/A2:2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001/AMD 2:2014) |
| I.S. EN 12012-4:2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| 10/30094845 DC : 0 | BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS |
| UNE-EN 62075:2013 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| DIN EN 13035-11:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010) |
| BS EN 50144-2-16:2003 | Safety of hand-held electric motor operated tools Particular requirements for tackers |
| I.S. EN 60335-2-75:2004 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| DIN EN 691-1:2013-01 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| 12/30240135 DC : 0 | BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS |
| CEI EN 50636-2-94 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| I.S. EN 13035-11:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| 12/30272422 DC : 0 | BS EN 14462 - SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3 |
| 03/301050 DC : DRAFT JAN 2003 | ISO 4254-1 ED.3 - AGRICULTURAL MACHINERY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 1: GENERAL |
| I.S. EN 50636-2-107:2015 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| I.S. EN 774:1996 | GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY |
| CEI EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| BS ISO 23600:2007 | Assistive products for persons with vision impairments and persons with vision and hearing impairments. Acoustic and tactile signals for pedestrian traffic lights |
| DIN EN 16228-7:2014-10 | Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment |
| 04/30111716 DC : DRAFT MAR 2004 | EN 14910 - GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| PREN 13289 : DRAFT 2015 | PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS PD ISO/TR 22100-1 : 2015 | SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS |
| I.S. EN 12042:2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 11203:2010-01 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| BS EN 15861:2012 | Food processing machinery. Smokehouses. Safety and hygienerequirements |
| BS EN 15997:2011 | All terrain vehicles (ATVs - Quads). Safety requirements and test methods |
| UNI EN ISO 9902-6 : 2014 | TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY |
| I.S. EN 15774:2010 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| ECMA 74 : 14ED 2017 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| UNE-EN 16704-2-1:2017 | Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS) |
| PREN 500-4 : DRAFT 2010 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES |
| DIN EN 16743 E : 2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 7779:2011 | Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010) |
| 15/30329716 DC | BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements |
| 14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 50416:2005 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric conveyor dishwashing machines |
| DIN EN ISO 9612:2009-09 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| BS ISO 18738-2:2012 | Measurement of ride quality Escalators and moving walks |
| PREN 14439 : DRAFT 2014 | CRANES - SAFETY - TOWER CRANES |
| DIN EN ISO 3745:2012-07 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
| DIN EN 16230-1:2015-04 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| BS ISO 20474-13:2017 | Earth-moving machinery. Safety Requirements for rollers |
| UNI EN ISO 11553-3 : 2013 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) |
| DIN EN 415-8:2011-06 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| 14/30299146 DC : 0 | BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 9612 : 2011 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| NF EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| 11/30247562 DC : 0 | BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 16228-7:2014 | Drilling and foundation equipment. Safety Interchangeable auxiliary equipment |
| I.S. EN 16474:2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
| ONORM EN ISO 7779 : 2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| UNE-EN 415-9:2010 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| 10/30186120 DC : 0 | BS EN 5395-1 - POWER LAWN-MOWERS, LAWN TRACTORS, LAWN AND GARDEN TRACTORS, PROFESSIONAL MOWERS, AND LAWN AND GARDEN TRACTORS WITH MOWING ATTACHMENTS - DEFINITIONS, SAFETY REQUIREMENTS AND TEST PROCEDURES |
| DIN EN 15180 E : 2015 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 50636-2-107 : 2016 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| 09/30193226 DC : 0 | BS EN ISO 22868 - FORESTRY MACHINERY - NOISE TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - ENGINEERING METHOD (GRADE 2 ACCURACY) |
| 95/710815 DC : DRAFT AUG 1995 | PREN 12076 - MEASUREMENT OF NOISE EMISSION FROM COMPRESSORS AND VACUUM PUMPS (ENGINEERING METHOD) |
| 09/30181667 DC : 0 | BS EN 13035-6:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| 08/30195341 DC : 0 | BS EN 60335-2-67 FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT AND FLOOR CLEANING MACHINES, FOR INDUSTRIAL AND COMMERCIAL USE |
| CAN/CSA-B354.6:17 | Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations) |
| 08/30175655 DC : DRAFT APR 2008 | BS EN 1265 AMD 1 - SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT |
| 08/30179926 DC : DRAFT MAR 2008 | BS EN 60335-2-77 - SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| CEI EN 50636-2-100 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS |
| CEI EN 62075 : 2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| DIN EN 13035-2 E : 2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY |
| DIN EN ISO 3746:2011-03 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| I.S. EN 60335-2-67:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE (IEC 60335-2-67:2012 (MOD)) |
| ISO 6394:2008 | Earth-moving machinery Determination of emission sound pressure level at operator's position Stationary test conditions |
| EN 13684:2004+A3:2009 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
| UNE-EN 16252:2013 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| I.S. EN 13035-2:2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY |
| BS EN ISO 10517 : 2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| I.S. EN 60335-2-72:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE (IEC 60335-2-72:2012 (MOD)) |
| ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
| I.S. EN 50434:2014 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PARTICULAR REQUIREMENTS FOR MAINS OPERATED SHREDDERS AND CHIPPERS |
| EN 60335-2-77:2010 | Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| EN ISO 7779:2010 | Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010) |
| I.S. EN ISO 19085-1:2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
| ISO 23600:2007 | Assistive products for persons with vision impairments and persons with vision and hearing impairments Acoustic and tactile signals for pedestrian traffic lights |
| I.S. EN 415-8:2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| PREN 453 : DRAFT 2011 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN ISO 16089:2016-06 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
| ANSI/ASA S12.10 PART 2 : 2011 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 2: DECLARATION OF NOISE EMISSION LEVELS |
| 16/30337481 DC : 0 | BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| ANSI S12.50 : 2002 : R2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
| 17/30364315 DC : 0 | BS EN 1459-7 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION |
| UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| ANSI S12.55 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
| ANSI/ASA S12.50/ISO 3740 : 2002(R2017) | Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards - Nationally Adopted International Standards |
| ANSI S12.50 : 2002 : R2007 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS |
| UNI EN 13035-6 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| ANSI/ASA S12.56/ISO 3746 : 2011(R2016) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
| 15/30314036 DC : 0 | BS EN 12012-1 - PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
| ANSI/ASA S12.10 PART 1 : 2010 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL |
| ANSI S12.56 : 2011 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE |
| CEI EN 50636-2-91 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
| PREN 1417 : DRAFT 2013 | PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| NF EN 60745-2-16 : 2011 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR TACKERS |
| ISO 15442:2012 | Cranes — Safety requirements for loader cranes |
| EN 12301:2000+A1:2008 | Plastics and rubber machines - Calenders - Safety requirements |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| EN 12733:2001+A1:2009 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
| I.S. EN 15895:2011 | CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS |
| ISO 6396:2008 | Earth-moving machinery Determination of emission sound pressure level at operator's position Dynamic test conditions |
| I.S. EN 13035-6:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| I.S. EN 60335-2-77:2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| I.S. EN 12012-1:2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| ONORM EN 1114-3 : 2010 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| UNE-EN 12463:2006 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 13390:2011-02 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 13621:2011-02 | Food processing machinery - Salad dryers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN ISO 11205:2009-12 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
| EN 50571:2013/A1:2018 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
| DIN EN 12012-4:2010-01 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| DIN EN 500-4:2011-06 | Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
| DIN EN 1501-4:2008-01 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 500-2:2009-05 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES |
| DIN EN 957-6:2014-06 | STATIONARY TRAINING EQUIPMENT - PART 6: TREADMILLS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 453:2015-04 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13035-4 E : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| DIN EN 289:2014-09 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 13871:2015-01 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 13020:2015 | Road surface treatment machines. Safety requirements |
| UNE-EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| BS EN 12012-2 : 2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| BS EN ISO 11202:2010 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| BS EN 12012-4 : 2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| ISO 11690-1:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| BS EN 14957 : 2006 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 4254-1:2016 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
| ISO 2151:2004 | Acoustics Noise test code for compressors and vacuum pumps Engineering method (Grade 2) |
| BS EN 13732:2013 | Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene |
| DIN EN 12301:2010-02 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| BS EN 1114-1:2011 | Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders |
| BS EN 1454:1997 | Portable, hand-held, internal combustion cutting-off machines. Safety |
| BS EN ISO 3745 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS |
| BS EN 500-3 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILIZING MACHINES AND RECYCLING MACHINES |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| BS EN 13852-1:2013 | Cranes. Offshore cranes General-purpose offshore cranes |
| BS EN 13042-2 : 2004 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING |
| BS EN ISO 9902-4 : 2001 | TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY |
| BS EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar. Safety requirements |
| BS EN 14655 : 2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14910 : 2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| BS EN ISO 11205:2009 | Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| BS EN 13390 : 2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN ISO 9902-2:2014-10 | TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014) |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN ISO 9902-7:2014-10 | Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001 + Amd 1:2009 + Amd 2:2014) |
| EN 12853:2001+A1:2010/AC:2010 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1846-2:2013-05 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance (includes Amendment A1:2013) |
| EN 1114-3:2001+A1:2008 | Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs |
| DIN EN ISO 9902-6:2001-07 | TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN ISO 3745:2017-10 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017) |
| EN 13288:2005+A1:2009 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| DIN EN ISO 9902-7:2001-07 | TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY (ISO 9902-7:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN ISO 9902-3:2001-07 | TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014) |
| EN 62075:2012/AC:2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012) |
| DIN EN 13035-1:2008-06 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 12001:2010-01 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN 13042-2:2004+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding |
| EN 13035-11:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
| DIN EN 16851:2017-06 | Cranes - Light crane systems |
| DIN EN ISO 9902-4:2001-07 | TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014) |
| EN 50636-2-92:2014 | Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| DIN EN 1114-2:1998-06 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| DIN EN 14886:2008-06 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| UNI EN ISO 22868 : 2011 | FORESTRY AND GARDENING MACHINERY - NOISE TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - ENGINEERING METHOD (GRADE 2 ACCURACY) |
| EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
| EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
| EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
| EN 12053:2001+A1:2008 | Safety of industrial trucks - Test methods for measuring noise emissions |
| EN 50416 : 2005 AMD 1 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| EN 60335-2-72:2012 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| EN 13570:2005+A1:2010 | Food processing machinery - Mixing machines - Safety and hygiene requirements |
| DIN EN 836 A1 : 1998 | GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY |
| DIN EN 15895:2011-08 | CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS |
| DIN EN ISO 11546-2:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| EN 50434:2014 | Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers |
| DIN EN ISO 11546-1:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| DIN EN ISO 9902-5:2001-07 | TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014) |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| EN 13389:2005+A1:2009 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
| EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| EN 60335-2-69:2012 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
| DIN EN 12012-1:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
| EN 60335-2-67:2012 | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use |
| EN 60335-2-75:2004/A12:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| EN 60335-2-58:2005/A12:2016 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES (IEC 60335-2-58:2002, MODIFIED) |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| EN 50636-2-91:2014 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| DIN EN 996:2010-02 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNE-EN 13390:2002 | Food processing machinery- Pie and tart machines - Safety and hygiene requirements. |
| UNE-EN 957-6:2011 | Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods |
| UNE-EN ISO 22868:2011 | Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) |
| ONORM EN 1417 : 2015 | PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| UNE-EN 1673:2001 | Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements. |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| UNE-EN ISO 11204:2010 V2 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| UNE-EN ISO 11202:2010 V2 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| UNE-EN 415-5:2007 | Safety of packaging machines - Part 5: Wrapping machines |
| OVE/ONORM EN 60335-2-75 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 12001:1996 | Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code |
| AS 5337:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO/TR 11690-3:1997 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| ISO/TR 25417:2007 | Acoustics Definitions of basic quantities and terms |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| AS 5336:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| AS 5335:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| AS ISO 9296:2019 | Acoustics - Declared noise emission values of information technology and telecommunications equipment |
| ISO 9613-2:1996 | Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 7574-1:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions |
| ISO 11205:2003 | Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
| AS/NZS ISO 8124.1:2019 | Safety of toys Safety aspects related to mechanical and physical properties |
| ISO 6926:2016 | Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| ISO 1996-1:2016 | Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| AS 5333.2:2019 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
| AS/NZS ISO 6394:2019 | Earth-moving machinery - Determination of emission sound pressure level at operator’s position - Stationary test conditions |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
US$175.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.