ISO 1127:1992
Current
Current
The latest, up-to-date edition.
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
12-17-1992
The outside diameters and thicknesses of the tubes have been selected from ISO 4200. If thicknesses greater than 14,2 mm are needed, they should be choosen from ISO 4200. Specifies the diameters, tolerances and other parameters of tubes. It tabulates conventional masses for austenitic (table 1) and for ferritic and martensitic (table 2) stainless steel tubes.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 1127:2019-03 | Identical |
| NF EN ISO 1127 : 1996 | Identical |
| NBN EN ISO 1127 : 1996 | Identical |
| NEN EN ISO 1127 : 1996 | Identical |
| NS 5583 : 1ED 1981 | Identical |
| NS 5584 : 1ED 1981 | Identical |
| NS EN ISO 1127 : 1ED 1996 | Identical |
| I.S. EN ISO 1127:1996 | Identical |
| PN ISO 1127 : 1996 | Identical |
| PN EN ISO 1127 : 1999 | Identical |
| SN EN ISO 1127 : 1996 | Identical |
| UNE-EN ISO 1127:1996 | Identical |
| UNI ISO 1127 : 1981 | Identical |
| UNI EN ISO 1127 : 1998 | Identical |
| SS-EN ISO 1127:1996 | Identical |
| BS EN ISO 1127:1997 | Identical |
| EN ISO 1127:1996 | Identical |
| DIN EN ISO 1127:1997-03 | Identical |
| IEC 60998-2-5:1996+AMD1:1999 CSV | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices |
| DIN 4935-1 E : 2002 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 1: SIZES DN 40 TO DN 100 THREADED SCREENS WITH CONTINUOUS SLOT |
| BS ISO 8434-1 : 94 AMD 9583 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS |
| BS ISO 8434-2:2007 | Metallic tube connections for fluid power and general use 37° flared connectors |
| DD ENV 1090-6:2001 | Execution of steel structures Supplementary rules for stainless steel |
| ISO 9330-6:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
| S.R. CWA 16519:2012 | DESIGN AND CONSTRUCTION CODE FOR MECHANICAL EQUIPMENTS OF INNOVATIVE NUCLEAR INSTALLATIONS |
| DIN EN ISO 8434-1 E : 2008 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| BS EN 14034-1 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS |
| BS EN ISO 8434-4:2000 | Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples |
| EN 13312-4:2001 | Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes |
| EN 10253-4:2008/AC:2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| DIN EN ISO 15748-2:2002-09 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 2: METHOD OF CALCULATION |
| DIN 4935-3:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 3: SIZES DN 500 TO DN 1000 FLANGED SCREENS WITH CONTINUOUS SLOT |
| EN 10079:2007 | Definition of steel products |
| EN 10297-2:2005/AC:2007 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| EN 10296-2:2005/AC:2007 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1949 : 2013 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| EN 10357:2013 | Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry |
| DIN EN ISO 8434-1:2008-02 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| DIN 4935-3 E : 2002 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 3: SIZES DN 500 TO DN 1000 FLANGED SCREENS WITH CONTINUOUS SLOT |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| 16/30290140 DC : 0 | BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 09/30201899 DC : 0 | BS EN 1949 - SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| DIN 18799-3:1999-08 | LADDERS FOR CONSTRUCTION WORKS - PART 3: LADDERS FOR CHIMNEYS - SAFETY REQUIREMENTS AND TESTS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| BS EN 10253-4:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS ISO 15500-16 : 2012 | ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 16: RIGID FUEL LINE IN STAINLESS STEEL |
| ISO 1609:1986 | Vacuum technology Flange dimensions |
| ISO 2604-5:1978 | Steel products for pressure purposes Quality requirements Part 5: Longitudinally welded austenitic stainless steel tubes |
| UNI ISO 8434-2 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 10297-2 E : 2006 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 1124-3:2009-02 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| DIN EN 10297-2:2006-02 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| DIN EN 10296-2 : 2007-06 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| BS EN 10220:2002 | Seamless and welded steel tubes. Dimensions and masses per unit length |
| BS EN ISO 15748-1:2002 | Ships and marine technology. Potable water supply on ships and marine structures Planning and design |
| I.S. EN 1949:2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 1267:2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| I.S. EN 14034-2:2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| I.S. EN 14034-4:2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| DIN EN 14034-3:2011-04 | Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds (includes Amendment A1:2011) |
| DIN EN 14034-1:2011-04 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure p<(Index)max> of dust clouds (includes Amendment A1:2011) |
| I.S. EN 10296-2:2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 14034-2:2011-04 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)<(Index)max> of dust clouds (includes Amendment A1:2011) |
| DIN EN 14034-4:2011-04 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds (includes Amendment A1:2011) |
| I.S. EN 14034-3:2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| I.S. EN 14034-1:2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS |
| I.S. EN 1124-3:2008 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 14034-1 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE PMAX OF DUST CLOUDS |
| KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
| VDI 2083 Blatt 13.3:2010-10 | Cleanroom technology - Quality, production, and distribution of ultrapure water - Pharmacy and other life-science applications |
| BS 3600:1976 | Specification for dimensions and masses per unit length of welded and seamless steel pipes and tubes for pressure purposes |
| BS 6362:1990 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\' |
| DIN 6656:1997-12 | PNEUMATIC TUBE SYSTEMS - CONVEYOR TUBES, CONVEYOR TUBE BENDS AND SLEEVES FOR PNEUMATIC TUBES LINES IN STEEL AND STAINLESS STEEL |
| I.S. EN ISO 8434-1:2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| BS EN 10253-3:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| DIN EN 10357 E : 2014 | AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY |
| ISO 12614-10:2014 | Road vehicles Liquefied natural gas (LNG) fuel system components Part 10: Rigid fuel line in stainless steel |
| DIN EN 10253-4:2008-06 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| UNI EN 806-4 : 2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| ONORM EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| BS EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption Installation |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS EN 10357:2013 | Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry |
| PREN 1949 : DRAFT 2009 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| UNI EN 10253-4 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10357:2013 | AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY |
| ISO 9329-4:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| UNI EN ISO 8434-1 : 2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN EN 1949:2013-05 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013) |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| DIN EN 10296-2 E : 2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| BS EN ISO 15748-2:2002 | Ships and marine technology. Potable water supply on ships and marine structures Method of calculation |
| UNE-EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| UNE-EN 1949:2011 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| ISO 8434-4:1995 | Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| ISO 15748-2:2002 | Ships and marine technology — Potable water supply on ships and marine structures — Part 2: Method of calculation |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 14198:2017-03 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| EN ISO 15748-1 : 2002 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PLANNING AND DESIGN |
| UNI EN 1267 : 2012 | INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| UNI EN 14034-3 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| ONORM EN 1949 : 2013 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES OTHER VEHICLES |
| UNI EN 14034-2 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| UNI EN 1124-3 : 2008 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS |
| UNI EN 14034-4 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| I.S. EN ISO 8434-4:2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 15500-16:2012 | Road vehicles Compressed natural gas (CNG) fuel system components Part 16: Rigid fuel line in stainless steel |
| BS ISO 12619-13:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Rigid fuel line in stainless steel |
| UNI EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 10253-3:2009-02 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 806-4:2010-06 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| DIN 4935-2 E : 2002 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 2: SIZES DN 100 TO DN 500 THREADED SCREENS WITH CONTINUOUS SLOT |
| BS ISO 8434-4 : 1995 AMD 11038 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| ISO 12619-13:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 13: Rigid fuel line in stainless steel |
| DIN EN 14198:2015-01 (Draft) | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| DIN EN 1267:2012-04 | Industrial valves - Test of flow resistance using water as test fluid |
| EN ISO 8434-1:2007/AC:2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| I.S. EN 806-4:2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| BS EN 1949:2011+A1:2013 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| BS EN 14034-4 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 1124-3:2008 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems System X. Dimensions |
| BS EN 13312-4:2001 | Biotechnology. Performance criteria for piping and instrumentation Tubes and pipes |
| BS EN 10296-2:2005 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 10246-2:2000 | Non-destructive testing of steel tubes Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10079:2007 | Definition of steel products |
| ISO 15748-1:2002 | Ships and marine technology — Potable water supply on ships and marine structures — Part 1: Planning and design |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| BS EN 10297-2:2005 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| DIN EN ISO 15748-1:2002-09 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 1: PLANNING AND DESIGN |
| EN 14034-2:2006+A1:2011 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
| EN ISO 15748-2 : 2002 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 2: METHOD OF CALCULATION |
| EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| EN 14034-3:2006+A1:2011 | Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
| EN 14034-4:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
| EN 14034-1:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
| EN ISO 8434-4 : 2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| I.S. EN 10246-2:2000 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATIC EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) AUSTENITIC AND AUSTENITIC-FERRITIC STEEL TUBES FOR VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS |
| 11/30197571 DC : 0 | BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON |
| 10/30197495 DC : 0 | BS ISO 15500-16 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 16: RIGID FUEL LINE |
| BS ISO 12614-10:2014 | Road vehicles. Liquefied natural gas (LNG) fuel system components Rigid fuel line in stainless steel |
| DIN 28025:2003-02 | NOZZLES OF STAINLESS STEEL - PN 10 TO PN 40 |
| 09/30202711 DC : 0 | BS EN 1267 - INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID |
| ONORM EN ISO 8434-1 : 2009 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| BS 6362:1984 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\' |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 10357 : 2014 | AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY |
| I.S. EN 10253-4:2008 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10253-3:2008 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| BS EN 1949 : 2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| BS EN 14034-3 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| BS EN 14034-2 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| BS EN 1267:2012 | Industrial valves. Test of flow resistance using water as test fluid |
| EN 1124-3:2008 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions |
| DIN EN 10079:2007-06 | Definition of steel products |
| DIN EN 10296-2:2006-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| EN 10246-2:2000 | Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| DIN 4935-1:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 1: SIZES DN 40 TO DN 100 THREADED SCREENS WITH CONTINUOUS SLOT |
| EN 1949:2011+A1:2013 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| DIN EN 10357:2014-03 | Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry |
| DIN 4935-2:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 2: SIZES DN 100 TO DN 500 THREADED SCREENS WITH CONTINUOUS SLOT |
| ASME B32.100 : 2016 | PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
| UNE-EN 14034-4:2005 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
| UNE-EN 14034-2:2006 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
| UNE-EN 14034-1:2005 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
| UNE-EN 14034-3:2006 | Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 5252:1991 | Steel tubes — Tolerance systems |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.