ISO 13065:2015
Current
Current
The latest, up-to-date edition.
Sustainability criteria for bioenergy
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
09-11-2015
ISO 13065:2015 specifies principles, criteria and indicators for the bioenergy supply chain to facilitate assessment of environmental, social and economic aspects of sustainability.
ISO 13065:2015 is applicable to the whole supply chain, parts of a supply chain or a single process in the supply chain. ISO 13065:2015 applies to all forms of bioenergy, irrespective of raw material, geographical location, technology or end use.
ISO 13065:2015 does not establish thresholds or limits and does not describe specific bioenergy processes and production methods. Compliance with ISO 13065:2015 does not determine the sustainability of processes or products.
ISO 13065:2015 is intended to facilitate comparability of various bioenergy processes or products. It can also be used to facilitate comparability of bioenergy and other energy options.
| DevelopmentNote |
Supersedes ISO/DIS 13065. (09/2015)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BS ISO 13065:2015 | Identical |
| SS-ISO 13065:2015 | Identical |
| DIN ISO 13065:2017-06 | Identical |
| NEN ISO 13065 : 2015 | Identical |
| DIN ISO 13065 E : 2017 | Identical |
| BS EN 16751:2016 | Bio-based products. Sustainability criteria |
| I.S. EN 16751:2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| ISO 37101:2016 | Sustainable development in communities — Management system for sustainable development — Requirements with guidance for use |
| ISO 37100:2016 | Sustainable cities and communities — Vocabulary |
| DIN EN 16751 E : 2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| IWA 19:2017 | Guidance principles for the sustainable management of secondary metals |
| PREN 17228 : DRAFT 2018 | PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION |
| DIN EN 16751:2016-06 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| BS ISO 37100:2016 | Sustainable cities and communities. Vocabulary |
| ISO 14055-1:2017 | Environmental management — Guidelines for establishing good practices for combatting land degradation and desertification — Part 1: Good practices framework |
| 18/30361790 DC : 0 | BS EN 17228 - PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION |
| ASTM E 3066 : 2016 | Standard Practice for Assessing Relative Sustainability Involving Energy or Chemicals from Biomass |
| BS ISO 37101:2016 | Sustainable development in communities. Management system for sustainable development. Requirements with guidance for use |
| 17/30341961 DC : 0 | BS EN ISO 14067 - GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION |
| EN 16751 : 2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| UNE-ISO 14055-1:2018 | Environmental management -- Guidelines for establishing good practices for combatting land degradation and desertification -- Part 1: Good practices framework |
| BS ISO 14055-1:2017 | Environmental management. Guidelines for establishing good practices for combatting land degradation and desertification Good practices framework |
| IWA 13:2014 | Multiple resource evaluation guideline |
| ISO/IEC 13273-2:2015 | Energy efficiency and renewable energy sources Common international terminology Part 2: Renewable energy sources |
| ISO 29441:2010 | Water quality Determination of total nitrogen after UV digestion Method using flow analysis (CFA and FIA) and spectrometric detection |
| ISO/TS 14067:2013 | Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication |
| ISO 14255:1998 | Soil quality Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air-dry soils using calcium chloride solution as extractant |
| ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
| AS ISO 37101:2020 | Sustainable development in communities - Management system for sustainable development - Requirements with guidance for use |
| ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
| ISO 14064-1:2006 | Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
| ISO 26000:2010 | Guidance on social responsibility |
| ISO 5961:1994 | Water quality Determination of cadmium by atomic absorption spectrometry |
| ISO 28001:2007 | Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements and guidance |
| ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
| ISO 10498:2004 | Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method |
| ISO 6060:1989 | Water quality — Determination of the chemical oxygen demand |
| ISO 15681-2:2003 | Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA) |
| ASTM D 5128 : 2014 : REDLINE | Standard Test Method for On-Line pH Measurement of Water of Low Conductivity |
| ISO 14046:2014 | Environmental management Water footprint Principles, requirements and guidelines |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| ISO/IEC 13273-1:2015 | Energy efficiency and renewable energy sources Common international terminology Part 1: Energy efficiency |
| ISO 13271:2012 | Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors |
| ASTM D 3591 : 2017 : REDLINE | Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |
| ISO 8689-2:2000 | Water quality Biological classification of rivers Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ASTM D 2974 : 2014 : REDLINE | Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils |
| ISO 14020:2000 | Environmental labels and declarations — General principles |
| ISO 7996:1985 | Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method |
| ASTM D 5907 : 2013-10 | TEST METHODS FOR FILTERABLE MATTER (TOTAL DISSOLVED SOLIDS) AND NONFILTERABLE MATTER (TOTAL SUSPENDED SOLIDS) IN WATER |
| ISO 10390:2005 | Soil quality Determination of pH |
| ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
| ISO 7890-3:1988 | Water quality — Determination of nitrate — Part 3: Spectrometric method using sulfosalicylic acid |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 10707:1994 | Water quality Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds Method by analysis of biochemical oxygen demand (closed bottle test) |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| ISO 13163:2013 | Water quality Lead-210 Test method using liquid scintillation counting |
| AS ISO 37100:2020 | Sustainable cities and communities - Vocabulary |
| ISO 17733:2015 | Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| ISO 10849:1996 | Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics of automated measuring systems |
| ISO 28000:2007 | Specification for security management systems for the supply chain |
| ISO 13824:2009 | Bases for design of structures General principles on risk assessment of systems involving structures |
| ISO 15913:2000 | Water quality Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| ISO 8689-1:2000 | Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates |
| ISO 8760:1990 | Work-place air Determination of mass concentration of carbon monoxide Method using detector tubes for short-term sampling with direct indication |
| ASTM D 3557 : 2017 : REDLINE | Standard Test Methods for Cadmium in Water |
| ISO 15392:2008 | Sustainability in building construction General principles |
| ISO 16883:2007 | Packaging Transport packages for dangerous goods Test methods for large packagings |
| ISO 8186:1989 | Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method |
US$225.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.