• There are no items in your cart

ISO 13715:2017

Current
Current

The latest, up-to-date edition.

Technical product documentation Edges of undefined shape Indication and dimensioning
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

03-17-2017

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.

In cases where the geometrically defined shape of an edge (for example, 1 45) is required, the general dimensioning principles given in ISO 1291 apply.

DevelopmentNote
Supersedes ISO/DIS 13715. (03/2017)
DocumentType
Standard
Pages
22
PublisherName
International Organization for Standardization
Status
Current
Supersedes

DIN EN ISO 10135:2010-02 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
BS ISO 10889-1:2004 Tool holders with cylindrical shank Cylindrical shank, location bore. Technical delivery conditions
DIN EN ISO 10209:2012-11 TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED DOCUMENTATION (ISO 10209:2012)
DIN 2285-2:2008-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - 'GO' SCREW RING GAUGES FOR ISO METRIC SCREW THREADS - PART 2: NOMINAL DIAMETER OVER 50 MM UP TO 200 MM, PRECISION MECHANICS
05/30123222 DC : DRAFT JAN 2005 ISO 3547-1 - PLAIN BEARINGS - WRAPPED BUSHES - PART 1: DIMENSIONS
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
15/30321493 DC : 0 BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
13/30286407 DC : 0 BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS ISO 9748:2000 Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
05/30123225 DC : DRAFT JAN 2005 ISO 3547-2 - PLAIN BEARINGS - WRAPPED BUSHES - PART 2: TEST DATA FOR OUTSIDE AND INSIDE DIAMETER
BS ISO 9736:2000 Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope. Dimensions and loads
DIN ISO 23480:2014-03 TOOLS FOR PRESSING - SLIDING PLATES (ISO 23480:2013)
BS ISO 10135:1994 Technical drawings. Simplified representation of moulded, cast and forged parts
BS EN ISO 4210-2:2015 Cycles. Safety requirements for bicycles Requirements for city and trekking, young adult, mountain and racing bicycles
08/30174605 DC : DRAFT SEP 2008 BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
BS ISO 9749:2000 Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
PREN 15194 : DRAFT 2015 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
BS ISO 3547-1:2006 Plain bearings. Wrapped bushes Dimensions
ISO 8279:2008 Aerospace Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 250 MPa (at ambient temperature)/235 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C Dimensions
I.S. EN ISO 10135:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
ISO 9748:2000 Aerospace — Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
ISO 10889-1:2004 Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditions
I.S. EN ISO 14405-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
ISO 8399-2:1998 Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions
ISO 6195:2013 Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances
ISO 9749:2000 Aerospace — Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
DIN 2285-2:1989-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GO SCREW RING GAUGES FOR ISO METRIC SCREW THREADS - PART 2: NOMINAL DIAMETERS OVER 50 MM UP TO 200 MM FOR PRECISION ENGINEERING
DIN ISO 3547-2:2015-12 PLAIN BEARINGS - WRAPPED BUSHES - PART 2: TEST DATA FOR EXTERNAL AND INTERNAL DIAMETERS (ISO 3547-2:2006)
DIN EN ISO 1101:2017-09 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
DIN SPEC 91184 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
16/30340339 DC : 0 BS ISO 3547-2 - PLAIN BEARINGS - WRAPPED BUSHES - PART 2: TEST DATA FOR OUTSIDE AND INSIDE DIAMETERS
ISO 3547-1:2006 Plain bearings Wrapped bushes Part 1: Dimensions
BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
BS ISO 8279:2008 Aerospace. Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/ 235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 °C, 1250 MPa(at ambient temperature)/235 °C and 1550 MPa (at ambient temperature)/600 °C.\'
BS ISO 10110-1:2006 Optics and photonics. Preparation of drawings for optical elements and systems General
DIN ISO 128-22:1999-11 Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999)
ISO 9759:2000 Aerospace — Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
ISO 23481:2013 Tools for pressing Cam driver plates
BS ISO 9759:2000 Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
DIN 2285-1:2008-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - 'GO' SCREW RING GAUGES FOR ISO METRIC SCREW THREADS - PART 1: NOMINAL DIAMETER FROM 1 MM UP TO 200 MM, GENERAL PURPOSE
DIN ISO 10110-1:2007-08 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 1: GENERAL
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
DIN EN ISO 4210-2:2015-12 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES - PART 2: REQUIREMENTS FOR CITY AND TREKKING, YOUNG ADULT, MOUNTAIN AND RACING BICYCLES (ISO 42102:2015)
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
07/30144373 DC : 0 BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
06/30154618 DC : DRAFT AUG 2006 ISO 16367 - TOOLS FOR PRESSING - GUIDE PLATES - U- AND V-BLOCKS
BS ISO 9757:2000 Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads
UNI EN ISO 10135 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
BS ISO 9747:2000 Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
BS ISO 3547-2:2017 Plain bearings. Wrapped bushes Test data for outside and inside diameters
BS EN 15194:2017 Cycles. Electrically power assisted cycles. EPAC Bicycles
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
ISO 8399-1:1998 Aerospace — Accessory drives and mounting flanges (Metric series) — Part 1: Design criteria
ISO 9758:2000 Aerospace — Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope — Dimensions and loads
ISO 12667:1993 Commercial vehicles and buses Cross-tooth propeller shaft flanges, type T
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
DIN EN ISO 14405-2:2012-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
ISO 9757:2000 Aerospace — Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels — Dimensions and loads
I.S. EN ISO 1101:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
VDI 3357:2014-01 Sliding elements in large stamping dies
VDI 3387:2014-09 Heel guidings in large stamping and forming dies
DIN ISO 3601-2:2010-08 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
BS AU 259:1995 Specification for components for commercial vehicles and buses. Cross-tooth propeller shaft flanges, type T
BS ISO 9737:2000 Eye-ends, in corrosion resisting steel, swaged on aircraft control wire rope. Dimensions and loads
I.S. EN ISO 4210-2:2015 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES - PART 2: REQUIREMENTS FOR CITY AND TREKKING, YOUNG ADULT, MOUNTAIN AND RACING BICYCLES (ISO 4210-2:2015)
BS ISO 128-22:1999 Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines
15/30321305 DC : 0 BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
DIN ISO 3547-1:2015-12 Plain bearings - Wrapped bushes - Part 1: Dimensions (ISO 3547-1:2006)
17/30338768 DC : 0 BS ISO 20929 - TOOLS FOR PRESSING - HEEL GUIDE PLATES IN LARGE STAMPING AND FORMING DIES
BS ISO 16367:2008 Tools for pressing. Guide plates. U- and V-blocks
UNI EN ISO 10209 : 2012 TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED DOCUMENTATION
DIN ISO 23481:2014-11 Tools for pressing - Cam driver plates (ISO 23481:2013)
ISO 10110-1:2006 Optics and photonics Preparation of drawings for optical elements and systems Part 1: General
S.R. CEN ISO/TS 8062-2:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
I.S. EN ISO 8015:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
UNI EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
UNE-EN ISO 8015:2012 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
DIN ISO 3547-2 E : 2015 PLAIN BEARINGS - WRAPPED BUSHES - PART 2: TEST DATA FOR EXTERNAL AND INTERNAL DIAMETERS (ISO 3547-2:2006)
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 5597:2010 Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 10766:2014 Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
ISO 23480:2013 Tools for pressing — Sliding plates
I.S. EN 15194:2017 CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES
ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
06/30151671 DC : DRAFT JUN 2006 BS ISO 16366 - TOOLS FOR PRESSING - L-SHAPED GUIDES
DIN ISO 16367:2010-09 Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008)
BS ISO 23480:2013 Tools for pressing. Sliding plates
I.S. EN ISO 10209:2012 TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED DOCUMENTATION (ISO 10209:2012)
BS EN ISO 10209:2012 Technical product documentation. Vocabulary. Terms relating to technical drawings, product definition and related documentation
BS A 328-1:1999 Accessory drives and mounting flanges (Metric sizes) Design criteria
BS ISO 9760:2000 Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings. Dimensions and loads
BS ISO 9761:2000 Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles. Dimensions
BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
10/30197395 DC : 0 BS ISO 10209 - TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED PRODUCTS
UNI CEN ISO/TS 8062-2 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
ISO 9738:2000 Aerospace — Turnbarrels, for aircraft control wire rope — Dimensions and loads
12/30260087 DC : 0 BS EN ISO 4210-2 - CYCLES - SAFETY REQUIREMENTS FOR BICYCLES - PART 2: REQUIREMENTS FOR CITY AND TREKKING, YOUNG ADULT, MOUNTAIN AND RACING BICYCLES
BS EN ISO 8015:2011 Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
BS ISO 23481:2013 Tools for pressing. Cam driver plates
BS ISO 10766:2014 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
06/30152154 DC : DRAFT JUNE 2006 BS ISO 23481 - TOOLS FOR PRESSING - CAM DRIVER PLATES
BS ISO 3601-2:2016 Fluid power systems. O-rings Housing dimensions for general applications
DIN ISO 10889-1:2006-01 Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore; Technical delivery conditions (ISO 10889-1:2004)
BS ISO 9758:2000 Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads
BS ISO 9738:2000 Turnbarrels, for aircraft control wire rope. Dimensions and loads
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
DIN 4547-2:2012-04 WARDROBES AND COMPARTMENT CUPBOARD OF STEEL - PART 2: FUNCTIONAL AND SAFETY REQUIREMENTS AND TESTING
BS ISO 16366:2008 Tools for pressing. L-shaped guides
08/30184522 DC : DRAFT JUNE 2008 BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
BS ISO 6195:2013 Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
DIN ISO 3547-1 E : 2015 PLAIN BEARINGS - WRAPPED BUSHES - PART 1: DIMENSIONS (ISO 3547-1:2006)
BS A 328-2:1999 Accessory drives and mounting flanges (Metric sizes) Dimensions
ISO 9157:2002 Aerospace Nuts, spline-drive, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 550 MPa (at ambient temperature)/235 degrees C, 1 550 MPa (at ambient temperature)/425 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C Dimensions
ISO 9219:2002 Aerospace — Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated — Dimensions and masses
ISO 129-1:2018 Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
UNI ISO 129-1 : 2011 TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
ISO 14405-2:2011 Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
ISO 16366:2008 Tools for pressing — L-shaped guides
ISO 16367:2008 Tools for pressing — Guide plates — U- and V-blocks
ISO 9747:2000 Aerospace — Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
BS EN ISO 1101:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
ISO 10209:2012 Technical product documentation — Vocabulary — Terms relating to technical drawings, product definition and related documentation
ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
EN ISO 10209:2012 Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation (ISO 10209:2012)
EN ISO 4210-2:2015 Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015)
EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles
EN ISO 10135:2009 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
ISO 7995:2002 Aerospace Nuts, hexagonal, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C Dimensions
16/30340342 DC : 0 BS ISO 3547-1 - PLAIN BEARINGS - WRAPPED BUSHES - PART 1: DIMENSIONS
DIN EN ISO 4210-2:2015-12 Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015)
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
ISO 9761:2000 Aerospace — Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles — Dimensions
10/30200334 DC : 0 BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
UNI EN ISO 8015 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
DIN ISO 16366:2010-11 Tools for pressing - L-shaped guides (ISO 16366:2008)
04/30125936 DC : DRAFT NOV 2004 ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
12/30265672 DC : 0 BS ISO 23481 - TOOLS FOR PRESSING - CAM DRIVER PLATES
06/30151787 DC : DRAFT JUN 2006 BS ISO 23480 - TOOLS FOR PRESSING - SLIDING PLATES
ISO 9736:2000 Aerospace — Eye-ends, in steel, threaded, for aircraft control wire rope — Dimensions and loads
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
ISO 8940:2002 Aerospace Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/120 degrees C, 900 MPa (at ambient temperature)/175 degrees C and 900 MPa (at ambient temperature)/235 degrees C Dimensions
NF EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
ISO 9737:2000 Aerospace — Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
UNE-EN ISO 4210-2:2015 Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015)
ISO 3547-2:2017 Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
ISO 3601-2:2016 Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
CEN ISO/TS 8062-2 : 2013 COR 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO/TS 8062-2:2013 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
ISO 4210-2:2015 Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles

ISO 128-24:2014 Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO 3098-1:2015 Technical product documentation Lettering Part 1: General requirements
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules
ISO 128-22:1999 Technical drawings General principles of presentation Part 22: Basic conventions and applications for leader lines and reference lines
ISO 128-20:1996 Technical drawings General principles of presentation Part 20: Basic conventions for lines
ISO 129-1:2004 Technical drawings Indication of dimensions and tolerances Part 1: General principles

View more information
US$150.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.