• There are no items in your cart

ISO 13943:2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Fire safety — Vocabulary
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

09-15-2023

Language(s)

English, French

Published date

08-03-2017

ISO 13943:2017 defines terminology relating to fire safety as used in ISO and IEC fire standards.

Committee
ISO/TC 92
DevelopmentNote
Supersedes ISO/IEC GUIDE 52 (04/2000) Supersedes ISO/DIS 13943. (08/2017)
DocumentType
Standard
Pages
53
PublisherName
International Organization for Standardization
Status
Superseded
Supersedes

ISO 834-10:2014 Fire resistance tests Elements of building construction Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
DIN EN 13381-9:2015-09 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS
I.S. EN 45545-1:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
IEC 60695-11-2 : 3.0 FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
UNE-EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
14/30300270 DC : 0 BS ISO 16733-1 - FIRE SAFETY ENGINEERING - SELECTION OF DESIGN FIRE SCENARIOS AND DESIGN FIRES - PART 1: SELECTION OF DESIGN FIRE SCENARIOS
04/101637 DC : DRAFT JAN 2004 ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
08/30186620 DC : DRAFT OCT 2008 BS EN 13381-7 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS
BS ISO 23932:2009 Fire safety engineering. General principles
BS EN 1366-10 : 2011 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
BS ISO 30021:2013 Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
UNE-EN 50200:2016 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
PD CEN ISO/TS 80004-6:2015 Nanotechnologies. Vocabulary Nano-object characterization
13/30255888 DC : 0 BS ISO 5660-1 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 1: HEAT RELEASE RATE (CONE CALORIMETER METHOD) AND SMOKE PRODUCTION RATE (DYNAMIC MEASUREMENT)
BS EN ISO 12863 : 2010 STANDARD TEST METHOD FOR ASSESSING THE IGNITION PROPENSITY OF CIGARETTES (ISO 12863:2010)
DIN EN 13381-5:2015-02 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
BS ISO 24678-6:2016 Fire safety engineering. Requirements governing algebraic formulae Flashover related phenomena
DIN EN 15882-3:2009-07 EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
DIN EN 13381-8:2013-08 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS
16/30319046 DC : 0 BS EN ISO 4589-3 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST
DD IEC/TS 60695-8-3:2008 Fire hazard testing Heat release. Heat release of insulating liquids used in electrotechnical products
DIN EN 15269-2:2012-12 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
12/30258984 DC : 0 BS ISO 834-10 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 10: SPECIFIC REQUIREMENTS TO DETERMINE THE CONTRIBUTION OF APPLIED FIRE PROTECTION MATERIALS TO STRUCTURAL ELEMENTS
ISO/TS 16732:2005 Fire safety engineering Guidance on fire risk assessment
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
PD ISO/TR 10295-3:2012 Fire tests for building elements and components. Fire testing of service installations Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
I.S. EN 15269-1:2010 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
UNE-EN 45545-4:2013 Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design
UNE-EN 13381-3:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
DIN EN 1364-1:2015-09 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS
DIN 18232-1:2002-02 SMOKE AND HEAT CONTROL SYSTEMS - PART 1: TERMS, SAFETY OBJECTIVES
CEN/TR 14819-2:2005 Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations
BS EN 60695-1-40:2014 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids
15/30302470 DC : 0 BS EN 13501-5 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS
I.S. EN 15269-7:2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS
07/30169692 DC : 0 BS EN 60695-2-12 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
ISO 16735:2006 Fire safety engineering — Requirements governing algebraic equations — Smoke layers
BS EN 60695-7-3:2011 Fire hazard testing Toxicity of fire effluent. Use and interpretation of test results
DIN EN 15269-20:2009-12 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
BS ISO 12136:2011 Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
ISO 10294-4:2001 Fire resistance tests Fire dampers for air distribution systems Part 4: Test of thermal release mechanism
ISO 16405:2015 Room corner and open calorimeter Guidance on sampling and measurement of effluent gas production using FTIR technique
CEN ISO/TS 80004-6:2015 NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013)
ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
BS PD ISO/TS 80004-6 : 2013 NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION
CEI EN 60695-1-30 : 2010 FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES
I.S. EN 15269-5:2014 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
16/30342722 DC : 0 BS ISO 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES
UNE-EN 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
UNI EN 13381-5 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF - STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
09/30206172 DC : 0 BS EN 60695-7-3 ED.1 - FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS
BS EN 1364-5:2017 Fire resistance tests for non-loadbearing elements Air transfer grilles
ISO 6944-1:2008 Fire containment — Elements of building construction — Part 1: Ventilation ducts
BS EN 60695-1-10:2017 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines
DIN EN 13381-9 E : 2015 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS
ISO/TR 13387-8:1999 FIRE SAFETY ENGINEERING - PART 8: LIFE SAFETY - OCCUPANT BEHAVIOUR, LOCATION AND CONDITION
BS EN 13381-8:2013 Test methods for determining the contribution to the fire resistance of structural members Applied reactive protection to steel members
NF EN 60695-7-1 : 2011 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
PD ISO/TR 15657:2013 Fire resistance tests. Guidelines for computational structural fire design
BS EN 2826:2011 Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
CEI EN 60695-9-1 : 2014 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE
PD ISO/TR 22899-2:2013 Determination of the resistance to jet fires of passive fire protection Guidance on classification and implementation methods
GOST R IEC 61034-2 : 2005 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS
CEI 89-38 : 2014 FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE CHARACTERISTIC HEAT FLUX FOR IGNITION FROM A NON-CONTACTING FLAME SOURCE
I.S. CEN TS 13381-1:2006 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
DIN EN ISO 9239-1:2010-11 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
14/30301908 DC : 0 BS ISO 16730-1 - FIRE SAFETY ENGINEERING - PROCEDURES AND REQUIREMENTS FOR VERIFICATION AND VALIDATION OF CALCULATION METHODS - PART 1: GENERAL
06/30151267 DC : 0 BS ISO CD 10840 - PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS
99/540249 DC : DRAFT MAR 1999 PREN 13501-2 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS (EXCLUDING PRODUCTS FOR USE IN VENTILATION SYSTEMS)
13/30267101 DC : 0 BS EN 15269-11 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE OF OPERABLE FABRIC CURTAINS
08/30166841 DC : DRAFT MAR 2008 BS EN 13381-8 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS
BS EN 13381-9:2015 Test methods for determining the contribution to the fire resistance of structural members Applied fire protection systems to steel beams with web openings
13/30275218 DC : 0 BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE
06/30117321 DC : DRAFT SEP 2006 ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY
BS ISO 16732-1:2012 Fire safety engineering. Fire risk assessment General
10/30216696 DC : 0 BS EN 45545-6 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS
09/30171916 DC : DRAFT JAN 2009 BS EN ISO 9239-1 - REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE
PREN 15254-4 : DRAFT 2016 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
BS ISO 17554:2014 Reaction to fire tests. Mass loss measurement
BS EN 13381-3:2015 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete members
DD CLC/TS 45545-5:2009 Railway applications. Fire protection on railway vehicles Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
12/30255984 DC : 0 BS ISO 16405 - MEASUREMENT OF TOXIC GAS PRODUCTION USING FTIR TECHNIQUE FOR ROOM CORNER TEST AND OPEN CALORIMETRY
PD ISO/TS 29761:2015 Fire safety engineering. Selection of design occupant behavioural scenarios
DD ISO/TS 14934-4:2007 Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests
DD IEC/TS 60695-11-3:2004 Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods
BS ISO 19701:2013 Methods for sampling and analysis of fire effluents
PREN 13501-5 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS
BS EN 60695-2-11:2014 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
ISO 834-1:1999 Fire-resistance tests Elements of building construction Part 1: General requirements
DD IEC/TS 60695-11-40:2002 Fire hazard testing. Test flames Confirmatory tests. Guidance
06/30151123 DC : DRAFT JUN 2006 BS ISO 22899-1 - DETERMINATION OF THE RESISTANCE TO JET FIRES OF PASSIVE FIRE PROTECTION MATERIALS - GENERAL REQUIREMENTS
06/30153111 DC : DRAFT JULY 2006
BS ISO 14697:2007 Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
09/30201231 DC : 0 BS EN 15080-13 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 13: LOADBEARING COLUMNS
ISO/TR 13387-7:1999 Fire safety engineering Part 7: Detection, activation and suppression
IEC 60695-11-5:2016 RLV Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
05/30127785 DC : DRAFT JAN 2005 IEC 60695-2-12 ED.2 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW WIRE FLAMMABILITY TEST METHODS FOR MATERIALS
I.S. EN 15269-20:2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS
I.S. EN 13381-3:2015 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
PREN 1364-3 : DRAFT 2011 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
DIN EN 1364-5:2017-09 Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
UNE-EN 45545-1:2013 Railway applications - Fire protection on railway vehicles - Part 1: General
PREN 1364-4 : DRAFT 2011 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
UNE-EN 60695-9-1:2013 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
ENV 13381-4:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members
GOST R IEC 61034-1 : 2005 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS
ASTM E 162 : 2016 : REDLINE Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ISO/TR 13387-5:1999 Fire safety engineering Part 5: Movement of fire effluents
ISO 24473:2008 Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
DIN EN ISO 1716:2010-11 REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE)
ISO 16737:2012 Fire safety engineering — Requirements governing algebraic equations — Vent flows
BIS IS 11000-2-1 : 2008(R2015) FIRE HAZARD TESTING - PART 2: TEST METHODS - SECTION 1: GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
ISO 16733-1:2015 Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios
PREN 1366-2 : DRAFT 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS
I.S. EN 60695-11-20:2015 FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS
S.R. CEN/TS 1187:2012 TEST METHODS FOR EXTERNAL FIRE EXPOSURE TO ROOFS
ISO 13344:2015 Estimation of the lethal toxic potency of fire effluents
BS EN 50553 : 2012 RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK
ISO 13785-2:2002 Reaction-to-fire tests for faades Part 2: Large-scale test
I.S. EN 61034-1:2005 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS
I.S. EN 13501-1:2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
I.S. EN 60332-1-2:2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME
BS EN 50575 : 2014 POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
UNE-EN 15882-4:2013 Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
IWA 13:2014 Multiple resource evaluation guideline
I.S. EN 50577:2015 ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION)
PREN 15650 : DRAFT 2017 VENTILATION FOR BUILDINGS - FIRE DAMPERS
ISO 9705-1:2016 Reaction to fire tests Room corner test for wall and ceiling lining products Part 1: Test method for a small room configuration
UNI CEI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
CEI UNI EN 45545-3 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
CEI EN 60695-1-21 : 1ED 2017 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
UNI EN ISO 25762 : 2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
ISO 21927-1:2008 Smoke and heat control systems — Part 1: Specification for smoke barriers
BS EN 60695-10-2:2014 Fire hazard testing Abnormal heat. Ball pressure test method
BS ISO 20902-1:2018 Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries General requirements
I.S. EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
UNI EN 13501-6 : 2014 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
ISO 12992:2017 Plastics — Vertical flame spread determination for film and sheet
I.S. EN 60695-2-10:2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013 (EQV))
UNI EN ISO 1716 : 2010 REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE)
I.S. EN 60695-2-11:2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOTWIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
NF EN 60695-1-30 : 2017 FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES
NF EN 60695-5-1 : 2003 FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE
NF ISO 19706 : 2011 GUIDELINES FOR ASSESSING THE FIRE THREAT TO PEOPLE
NF ISO 16110-1 : 2009 HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
UNI EN 13381-8 : 2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS
NF EN 1366-9 : 2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
ASTM E 1537 : 2016 : REDLINE Standard Test Method for Fire Testing of Upholstered Furniture
BS EN 15269-11:2018 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance for operable fabric curtains
I.S. EN 50200:2015 METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS
S.R. CEN/TS 16459:2013 EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187
ASTM E 1546 : 2015 : REDLINE Standard Guide for Development of Fire-Hazard-Assessment Standards
ISO 5660-2:2002 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
EN 1366-11:2018 Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
ASTM E 906 : 2009 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
UNE-EN 13501-2:2009 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
UNE-EN 13501-5:2007 Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
DIN EN 1364-3:2014-05 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
DIN EN ISO 4589-1 E : 1999 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
EN 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
BS EN 14470-2:2006 Fire safety storage cabinets Safety cabinets for pressurised gas cylinders
03/318326 DC : DRAFT NOV 2003
BS EN 1634-3:2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware Smoke control test for door and shutter assemblies
BS EN 1366-6:2004 Fire resistance tests for service installations Raised access and hollow core floors
UNE-EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
BS EN 14390:2007 Fire test. Large-scale room reference test for surface products
IEC 60332-1-1:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulatedwire or cable - Apparatus
UNE-CEN/TS 1187:2013 Test methods for external fire exposure to roofs
BS EN 13501-3 : 2005 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS
BS EN ISO 5659-2:2017 Plastics. Smoke generation Determination of optical density by a single-chamber test
BS EN 1365-1:2012 Fire resistance tests for loadbearing elements Walls
IEC 60695-7-1:2010 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
IEC 60695-1-40:2013 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
I.S. EN 1364-3:2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
I.S. EN ISO 9239-1:2010 REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE
EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 60332-1-3:2004/A1:2015 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES (IEC 60332-1-3:2004/A1:2015)
EN 12101-1:2005/A1:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
EN 13501-3:2005+A1:2009 Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
EN 60695-7-2:2011 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
EN 60695-7-3 : 2011 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011)
EN 13381-3:2015 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
EN 50575:2014/A1:2016 POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60695-1-10:2016 RLV Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 13381-2:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
CEN/TS 45545-4:2009 Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for railway rolling stock design
EN 60695-1-11:2015 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
UNI EN 1366-4 : 2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
EN 12101-6:2005/AC:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS
EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
CEN/TS 45545-7:2009 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
EN 60695-11-4 : 2011 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011)
DIN EN ISO 4589-3:2017-08 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
EN 60695-1-30:2017 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
CEN/TS 45545-6:2009 Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems
EN 13381-8:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
EN 60695-2-12:2010/A1:2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014)
EN 45545-3:2013 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 13501-5:2016 Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
EN 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections
EN 1366-7:2004 Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
EN 13381-5:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
CLC/TS 45545-5:2009 Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
ONORM EN 1366-10 : 2011 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
OVE/ONORM EN 60695-2-10 : 2014 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013)
ONORM EN 15269-3 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE TIMBER FRAMED WINDOWS
OVE/ONORM EN 60695-7-2 : 2013 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011)
10/30183696 DC : 0 BS ISO 12136 - REACTION TO FIRE TESTS - MEASUREMENT OF FUNDAMENTAL MATERIAL PROPERTIES USING A FIRE PROPAGATION APPARATUS
UNE-ISO 16730-1:2017 Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General
DD ENV 1363-3:2000 Fire resistance tests Verification of furnace performance
17/30335581 DC : 0 BS ISO 24678-7 - FIRE SAFETY ENGINEERING - REQUIREMENTS GOVERNING ALGEBRAIC EQUATIONS - PART 7: RADIATION HEAT FLUX RECEIVED FROM AN OPEN POOL FIRE
ISO 834-8:2002 Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements
DIN EN 15882-4:2012-07 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
ISO 21927-2:2006 Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators
12/30259157 DC : 0 BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
CEI UNI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
CEI UNI EN 45545-4 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN
DIN EN ISO 1182:2010-10 REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST
UNI EN 15269-3 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE TIMBER FRAMED WINDOWS
ISO 12136:2011 Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
DD ENV 13381-3:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete members
PD ISO/TR 26368:2012 Environmental damage limitation from fire-fighting water run-off
11/30248570 DC : 0 BS ISO 12468-1 - EXTERNAL EXPOSURE OF ROOFS TO FIRE - PART 1: TEST METHOD
BS ISO 26367-2:2017 Guidelines for assessing the adverse environmental impact of fire effluents Methodology for compiling data on environmentally significant emissions from fires
I.S. EN 50553:2012 RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK
UNE-EN 15882-1:2013 Extended application of results from fire resistance tests for service installations - Part 1: Ducts
03/311411 DC : 0 IEC 60695-1-11 ED.1 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
BS EN 60695-7-1:2010 Fire hazard testing Toxicity of fire effluent. General guidance
BS ISO 12472:2003 Fire resistance of timber door assemblies. Method of determining the efficacy of intumescent seals
IEC TS 60695-1-40:2002 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
UNE-EN 15269-10:2015 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
ISO 834-7:2000 Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns
ISO 17554:2014 Reaction to fire tests Mass loss measurement
DD CEN/TS 1187:2012 Test methods for external fire exposure to roofs
14/30301149 DC : 0 BS EN 1366-2 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS
06/30116005 DC : DRAFT MAY 2006 ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS
UNI EN 15269-7 : 2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS
16/30319040 DC : 0 BS EN ISO 4589-1 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GUIDANCE
DIN EN 15650 E : 2010 VENTILATION FOR BUILDINGS - FIRE DAMPERS
BS EN 60695-11-10:2013 Fire hazard testing Test flames. 50 W horizontal and vertical flame test methods
DIN EN 15269-10:2011-07 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
04/19990095 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
BS EN 60695-9-1:2013 Fire hazard testing Surface spread of flame. General guidance
03/308232 DC : DRAFT JUNE 2003 EN 50399-2-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-1: PROCEDURE FOR CLASSIFICATION IN EUROCLASSES C AND D
03/308233 DC : DRAFT JUNE 2003 EN 50399-2-2 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-2: PROCEDURE FOR CLASSIFICATION IN EUROCLASS B
PD ISO/IEC GUIDE 37:2012 Instructions for use of products by consumers
08/30189150 DC : 0 BS EN 13381-4 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION PRODUCTS TO STEEL MEMBERS
BS EN 12101-7:2011 Smoke and heat control systems Smoke duct sections
PREN 45545-3 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
BS EN 45545-4:2013 Railway applications. Fire protection on railway vehicles Fire safety requirements for rolling stock design
DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
CEI EN 60695-11-3 : 2013 FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS
CEI EN 60695-11-5 : 2006 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
ONORM EN 1366-5 : 2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
BS ISO 16737:2012 Fire safety engineering. Requirements governing algebraic equations. Vent flows
10/30216684 DC : 0 BS EN 45545-1 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
ASTM D 3675 : 2017 : REDLINE TEST METHOD FOR SURFACE FLAMMABILITY OF FLEXIBLE CELLULAR MATERIALS USING A RADIANT HEAT ENERGY SOURCE
07/30169693 DC : 0 BS EN 60695-11-11 - FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE IGNITION CHARACTERISTIC HEAT FLUX FROM A NON-CONTACTING FLAME SOURCE
07/30169691 DC : 0 BS EN 60695-2-13 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY (GWIT) TEST METHOD FOR MATERIALS
ISO 13784-2:2002 Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
BS EN 60332-1-1 : 2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS
PREN 1365-2 : DRAFT 2012 FIRE RSISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS
DIN EN 13501-6:2014-07 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
16/30287218 DC : 0 BS ISO 19021 - TEST METHOD FOR DETERMINATION OF GAS CONCENTRATIONS IN ISO 5659-2 USING FOURIER TRANSFORM INFRARED SPECTROSCOPY
ISO 13785-1:2002 Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
DIN EN 45545-1:2013-08 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
BS ISO 871:2006 Plastics. Determination of ignition temperature using a hot-air furnace
DIN EN 1366-9:2008-08 Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
PD 476-3:2012 Classification rules for the end-use application of test results arising from BS 476-3, \'Classification and method of test for external fire exposure of roofs\'
BS ISO 16733-1:2015 Fire safety engineering. Selection of design fire scenarios and design fires Selection of design fire scenarios
06/30117323 DC : 0 ISO 20632 - ROOM TEST FOR PIPE INSULATION
12/30273535 DC : 0 IEC 60695-2-11 ED 2.0 - FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END PRODUCTS
BS EN 45545-1:2013 Railway applications. Fire protection on railway vehicles General
ISO/TR 13387-4:1999 Fire safety engineering Part 4: Initiation and development of fire and generation of fire effluents
ASTM E 906/E906M : 2017 : REDLINE Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
11/30252464 DC : 0 BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
09/30183765 DC : 0 BS EN 60695-6-1 A1 ED.2 - FIRE HAZARD TESTING - PART 6-1: SOME OBSCURATION - GENERAL GUIDANCE
15/30300929 DC : 0 BS EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
DD CEN/TS 45545-1:2009 Railway applications. Fire protection on railway vehicles General
BS EN 15650:2010 Ventilation for buildings. Fire dampers
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters Primary calibration methods
UNE-EN 45545-3:2013 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
12/30254408 DC : 0 BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
BS ISO 3009:2003 Fire resistance tests. Elements of building construction. Glazed elements
BS EN 60695-2-12 : 2010 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
BS ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests
I.S. EN ISO 1716:2010 REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE)
ENV 13381-6:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
ISO/TR 12468-3:2014 External exposure of roofs to fire Part 3: Commentary
ISO 30021:2013 Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
BS ISO 22899-1:2007 Determination of the resistance to jet fires of passive fire protection materials General requirements
07/30169689 DC : 0 BS EN 60695-1-10 - FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
DD ENV 13381-6:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns
CEI EN 60695-4 : 2013 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS
UNE-EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
09/30205350 DC : 0 BS EN 60695-7-2 ED.1 - FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS
05/19971310 DC : DRAFT JAN 2005 EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
04/30111082 DC : DRAFT MARCH 2004 IEC 61034-1 ED.3 - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1 - TEST APPARATUS
ASTM E 2957 : 2017 : REDLINE Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
S.R. CEN ISO/TS 80004-6:2015 NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013)
DIN EN 16035:2013-03 HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTERCHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
NF EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
DIN EN 15269-1:2010-07 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
EN 1366-5:2010 Fire resistance tests for service installations - Part 5: Service ducts and shafts
I.S. EN 13381-2:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
ISO/TR 16738:2009 Fire-safety engineering Technical information on methods for evaluating behaviour and movement of people
DD CEN/TS 45545-6:2009 Railway applications. Fire protection on railway vehicles Fire control and management systems
ISO/TR 26368:2012 Environmental damage limitation from fire-fighting water run-off
UNI EN 13381-2 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
UNE-EN ISO 12863:2011 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010/Cor 1:2011)
I.S. EN 13381-5:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
AFAP-1 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS
PD IEC/TR 62757:2015 Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible ac transmission systems (FACTS) and their valve halls
BS EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware General requirements
I.S. EN 16035:2012 HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
UNI EN 15269-10 : 2011 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES
NF EN 61034-2 : 2005 AMD 1 2013 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS
CEI EN 60695-1-10 : 2012 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
BS EN 15882-1 : 2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS
S.R. CEN/TS 45545-6:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS
I.S. EN 13381-1:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
BS EN 60695-6-1 : 2005 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
I.S. EN 60695-4:2012 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012 (EQV))
BS EN 61034-1 : 2005 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS
I.S. EN 13381-9:2015 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS
ISO 5658-2:2006 Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
CLC/TR 50670:2016 External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s)
EN 15882-1:2011+A1:2017 Extended application of results from fire resistance tests for service installations - Part 1: Ducts
PREN 50553 : DRAFT 2010 RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK
ISO 3009:2003 Fire-resistance tests Elements of building construction Glazed elements
I.S. EN 60695-10-3:2016 FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
ISO 26367-2:2017 Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Methodology for compiling data on environmentally significant emissions from fires
EN ISO 19353:2016 Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)
PREN 15269-1 : DRAFT 2017 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
ISO 7076-6:2016 Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems
ISO 19703:2010 Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
S.R. CEN/TS 45545-4:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR RAILWAY ROLLING STOCK DESIGN
DIN EN 13501-6 E : 2014 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
CEI EN 60695-7-1 : 2013 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
I.S. EN 1364-5:2017 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
I.S. EN 60695-7-3:2011 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011)
I.S. EN 60695-7-2:2011 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011)
ISO 834-11:2014 Fire resistance tests Elements of building construction Part 11: Specific requirements for the assessment of fire protection to structural steel elements
UNE-EN 50399:2012 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
I.S. CEN TR 14819-2:2006 SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS
CEI EN 60695-10-2 : 2015 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
I.S. EN 60695-1-11:2015 FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
UNI EN 15269-20 : 2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS
NF ISO 23932 : 2009 FIRE SAFETY ENGINEERING - GENERAL PRINCIPLES
UNI EN 13381-1 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
UNI EN 1366-9 : 2008 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
NF EN 60695-2-13 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
NF ISO 16732-1 : 2012 FIRE SAFETY ENGINEERING - FIRE RISK ASSESSMENT - PART 1: GENERAL
S.R. CEN/TS 45545-2:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
ASTM D 350 : 2013 : REDLINE Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
ASTM E 2102 : 2017 : REDLINE Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
EN 60695-6-1:2005/A1:2010 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
IEC TS 60695-6-31:2013 Fire hazard testing - Part 6-31: Smoke obscuration - Small-scale static test - Materials
IEC TS 60695-1-20:2008 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
IEC TS 60695-1-14:2017 Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products
ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
ISO 5660-1:2015 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
DIN EN 1366-6:2005-02 Fire resistance tests for service installations - Part 6: Raised access and hollow core floors; German version EN 1366-6:2004
I.S. EN 60695-9-2:2014 FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
DIN EN 1365-6:2005-02 Fire resistance tests for loadbearing elements - Part 6: Stairs; German version EN 1365-6:2004
DIN EN ISO 5659-2:2016-02 (Draft) PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
DIN EN 12101-6:2005-09 Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits
DIN EN 1366-3:2009-07 Fire resistance tests for service installations - Part 3: Penetration seals
DIN EN 1366-2:2015-09 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS
DIN EN 12101-1:2006-06 Smoke and heat control systems - Part 1: Specification for smoke barriers
DIN EN 1364-4:2014-05 Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
DIN EN ISO 4589-3 E : 2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
CEI EN 60695-6-2 : 2013 FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS
DIN EN ISO 4589-3:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
DIN EN ISO 4589-1:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
DIN EN 14390:2007-04 Fire test - Large-scale room reference test for surface products
IEC 60695-8-1:2016 Fire hazard testing - Part 8-1: Heat release - General guidance
BS EN 1366-4 : 2006 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
DIN EN ISO 4589-2:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
PD IEC/TR 62222:2012 Fire performance of communication cables installed in buildings
UNE-EN 1364-3:2015 Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
PD IEC/TR 60695-1-21:2008 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
IEC 60695-7-2:2011 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
UNE-EN 13238:2011 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
I.S. EN 1366-1:2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
EN 1366-1:2014 Fire resistance tests for service installations - Part 1: Ventilation ducts
I.S. EN 13238:2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES
I.S. EN 1365-1:2012 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS
I.S. EN 1366-4:2006 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
I.S. EN ISO 4589-1:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
DIN EN 1363-1:2012-10 FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS
ONORM EN 15269-20 : 2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS
I.S. EN 1365-2:2014 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS
I.S. EN 1364-4:2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
I.S. EN 1634-3:2004 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
I.S. EN 1364-1:2015 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS
I.S. EN 13501-3:2006 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS
I.S. EN ISO 4589-2:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN 1366-1:2014-12 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
I.S. EN ISO 5659-2:2017 PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
I.S. EN 13501-2:2016 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES
I.S. EN ISO 15791-1:2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014)
I.S. EN 1366-2:2015 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS
I.S. EN ISO 340:2013 CONVEYOR BELTS - LABORATORY SCALE FLAMMABILITY CHARACTERISTICS - REQUIREMENTS AND TEST METHOD (ISO 340:2013)
I.S. EN ISO 13927:2015 PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR (ISO 13927:2015)
EN 1366-4:2006+A1:2010 Fire resistance tests for service installations - Part 4: Linear joint seals
I.S. EN 13501-5:2016 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS
DIN EN 13238:2010-06 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
I.S. EN ISO 4589-3:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
EN 60332-1-2:2004/A11:2016 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015)
DIN EN 15269-7:2010-04 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
I.S. EN 1366-3:2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
NBR IEC 60695-2-10 : 2015 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
NBR IEC 60695-2-12 : 2013 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
OVE/ONORM EN 60695-9-2 : 2015 FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-9-2:2014)
CEI EN 60695-7-2 : 2013 FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS
NBR IEC 60695-2-13 : 2013 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
OVE/ONORM EN 60695-6-1 : 2011 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE (IEC 60695-6-1:2005 + A1:2010)
OVE/ONORM EN 60695-4 : 2013 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012)
UNE-EN 13381-2:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
UNE-EN 1634-1:2016 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
DIN EN 1366-10:2011-07 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
12/30250116 DC : 0 BS ISO 834-11 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 11: SPECIFIC REQUIREMENTS FOR THE ASSESSMENT OF FIRE PROTECTION TO STRUCTURAL STEEL ELEMENTS
I.S. EN 12101-8:2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS
PREN 45545-6 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS
14/30291693 DC : 0 BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS
16/30319043 DC : 0 BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST
DD CEN/TS 13381-1:2005 Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes
ISO/IEC Guide 37:2012 Instructions for use of products by consumers
08/30183661 DC : DRAFT SEP 2008 BS ISO 29473 - FIRE TESTS - UNCERTAINTY OF MEASUREMENTS IN FIRE TESTS
BS ISO 19706:2011 Guidelines for assessing the fire threat to people
BS EN 60695-11-4:2011 Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method
10/30216690 DC : 0 BS EN 45545-3 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
BS EN 15080-8:2009 Extended application of results from fire resistance tests Beams
10/30216687 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
UNI CEN/TS 16459 : 2014 EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187
13/30234849 DC : 0 BS EN ISO 13927 - PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR
BS EN 16733:2016 Reaction to fire tests for building products. Determination of a building product\'s propensity to undergo continuous smouldering
PD CEN/TR 14819-2:2005 Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations
16/30340523 DC : 0 BS EN 17020-4 - EXTENDED APPLICATION OF TEST RESULTS ON DURABILITY OF SELFCLOSING FOR DOORSETS AND OPENABLE WINDOWS - PART 4: DURABILITY OF SELF-CLOSING OF FIRE RESISTANCE HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
NF ISO 26367-1 : 2011 GUIDELINES FOR ASSESSING THE ADVERSE ENVIRONMENTAL IMPACT OF FIRE EFFLUENTS - PART 1: GENERAL
UNE-EN 60695-1-30:2017 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
PREN 13381-10 : DRAFT 2016 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION
DIN EN 15882-4 E : 2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
ISO 22899-1:2007 Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements
16/30284262 DC : 0 BS ISO 26367-2 - GUIDELINES FOR ASSESSING THE ADVERSE ENVIRONMENTAL IMPACT OF FIRE EFFLUENTS - PART 2: METHODOLOGY FOR COMPILING DATA ON ENVIRONMENTALLY SIGNIFICANT EMISSIONS FROM FIRES
BS ISO 10294-5:2005 Fire-resistance tests. Fire dampers for air distribution systems Intumescent fire dampers
BS EN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance for steel sliding doorsets
14/30287830 DC : 0 BS EN 16733 - BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCTS PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
ASTM E 2280 : 2017 : REDLINE Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
BS EN 15269-2:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted steel doorsets
DD ENV 1187:2002 Test methods for external fire exposure to roofs
UNE-EN 50577:2016 Electric cables - Fire resistance test for unprotected electric cables (P classification)
18/30369843 DC : DRAFT APR 2018 BS ISO 11907-1 - PLASTICS - SMOKE GENERATION - DETERMINATION OF THE CORROSIVITY OF FIRE EFFLUENTS - PART 1: GENERAL REQUIREMENTS AND APPLICABILITY
BS EN 16035:2012 Hardware performance sheet (HPS). Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
BS EN 50200:2015 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
17/30347436 DC : 0 BS EN 15269-1 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
14/30287765 DC : 0 BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
BS EN 60695-1-20:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
BS EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations Penetration seals
BS EN 60695-1-11:2015 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment
05/30127781 DC : DRAFT JAN 2005 IEC 60695-2-11 ED.2 - FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW WIRE FLAMMABILITY TEST METHODS FOR END PRODUCTS
15/30302476 DC : 0 BS EN 13501-2 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES
BS EN 15269-20:2009 Extended application of test results for fire resistance and/ or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
I.S. EN 50399:2011 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
13/30281097 DC : 0 BS EN 60695-1-11 ED 2.0 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
UNE-EN 16733:2016 Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering
UNE-EN 60695-10-3:2017 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
NF EN 60695-2-12 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
DIN EN 16733:2016-07 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
PD ISO/TS 5660-4:2016 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release
I.S. EN 1366-10:2011 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
17/30359807 DC : DRAFT SEP 2017 BS ISO 24679-1 - FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE - PART 1: GENERAL
12/30258900 DC : 0 BS ISO 12468-2 - EXTERNAL FIRE EXPOSURE TO ROOFS - PART 2: CLASSIFICATION OF ROOFS
11/30252238 DC : 0 BS EN 1364-1 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS
09/30171920 DC : DRAFT JAN 2009 BS EN ISO 11925-2 - REACTION TO FIRE TESTS - IGNITABILITY OF BUILDING PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
NFPA 270 : 2018 STANDARD TEST METHOD FOR MEASUREMENT OF SMOKE OBSCURATION USING A CONICAL RADIANT SOURCE IN A SINGLE CLOSED CHAMBER
BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests
BS ISO 10295-1:2007 Fire tests for building elements and components. Fire testing of service installations Penetration seals
DD CEN/TS 45545-7:2009 Railway applications. Fire protection on railway vehicles Fire safety requirements for flammable liquid and flammable gas installations
I.S. EN 45545-4:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN
BS ISO 12828-1:2011 Validation method for fire gas analysis Limits of detection and quantification
IEC 60695-11-2:2017 RLV Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
14/30231508 DC : 0 BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY
12/30230305 DC : 0 BS EN 60695-10-2 ED 3.0 - FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST
16/30347433 DC : 0 BS EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
UNE-EN 12101-7:2013 Smoke and heat control systems - Part 7: Smoke duct sections
CEI EN 60695-8-1 : 2009 FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE
10/30216699 DC : 0 BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
I.S. EN 60695-8-2:2017 FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
BS ISO 16730-1:2015 Fire safety engineering. Procedures and requirements for verification and validation of calculation methods General
BS ISO 834-10:2014 Fire resistance tests. Elements of building construction Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
BS PD CLC/TR 50670 : 2016 EXTERNAL FIRE EXPOSURE TO ROOFS IN COMBINATION WITH PHOTOVOLTAIC (PV) ARRAYS - TEST METHOD(S)
BS EN 45545-3:2013 Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers
UNE-EN 60695-7-1:2011 Fire hazard testing -- Part 7-1: Toxicity of fire effluent - General guidance
BS ISO 16405:2015 Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique
14/30291624 DC : 0 BS ISO 21927-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS
BS EN 61034-2 : 2005 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS PART 2: TEST PROCEDURE AND REQUIREMENTS
BS EN 12101-8:2011 Smoke and heat control systems Smoke control dampers
12/30269145 DC : 0 BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
BS ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
UNE-EN 13381-4:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
UNE-EN 60695-8-1:2017 Fire hazard testing - Part 8-1: Heat release - General guidance
BS EN 13381-2:2014 Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes
CEI 89-37 : 2014 FIRE HAZARD TESTING - PART 8-3: HEAT RELEASE - HEAT RELEASE OF INSULATING LIQUIDS USED IN ELECTROTECHNICAL PRODUCTS
PREN 1364-1 : DRAFT 2011 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS
UNI CEN/TS 13381-1 : 2006 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
PREN 15269-20 : DRAFT 2017 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS
BS EN 60684-2:2011 Flexible insulating sleeving Methods of test
BS ISO 13927 : 2001 AMD 14411 PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR
05/30137099 DC : 0 ISO 5925-1 - FIRE TESTS - SMOKE CONTROL DOOR AND SHUTTER ASSEMBLIES - PART 1: AMBIENT AND MEDIUM TEMPERATURE LEAKAGE TEST PROCEDURE
NF EN 61034-1 : 2005 AMD 1 2014 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS
I.S. EN 1366-12:2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK
BS EN 60695-10-3:2016 Fire hazard testing Abnormal heat. Mould stress relief distortion test
ISO 12828-1:2011 Validation method for fire gas analysis — Part 1: Limits of detection and quantification
EN 50577:2015 Electric cables - Fire resistance test for unprotected electric cables (P classification)
XP ISO/TS 14934-4 : 2007 XP FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS
CEI EN 60695-11-2 : 2014 FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
I.S. EN 15254-7:2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
BS EN 1366-5:2010 Fire resistance tests for service installations Service ducts and shafts
PREN 50577 : DRAFT 2012 ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION)
UNE-EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
ISO/TR 13387-1:1999 FIRE SAFETY ENGINEERING - PART 1: APPLICATION OF FIRE PERFORMANCE CONCEPTS TO DESIGN OBJECTIVES
DD ENV 13381-2:2002 Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes
IEC 60695-1-12:2015 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
UNE-EN 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
UNE-EN 13381-5:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
I.S. EN 15080-8:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
ASTM E 2707 : 2015 : REDLINE Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
ISO/TR 15657:2013 Fire resistance tests Guidelines for computational structural fire design
ISO 20632:2008 Reaction-to-fire tests — Small room test for pipe insulation products or systems
I.S. ENV 1363-3:1999 FIRE RESISTANCE TESTS - PART 3: VERIFICATION OF FURNACE PERFORMANCE
PREN 13381-1 : DRAFT 2011 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
BS EN 13501-6:2014 Fire classification of construction products and building elements Classification using data from reaction to fire tests on electric cables
BS ISO 5658-2 : 2006 REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION
NF EN 60695-2-10 : 2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/OUT-WIRE BASED TEST METHOD - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
I.S. EN 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
EN ISO 12863:2010/A1:2016 STANDARD TEST METHOD FOR ASSESSING THE IGNITION PROPENSITY OF CIGARETTES (ISO 12863:2010)
BS EN 1634-1 : 2014 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 1: FIRE RESISTANCE TEST FOR DOOR AND SHUTTER ASSEMBLIES AND OPENABLE WINDOWS
BS ISO 10294-4 : 2001 FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 4: TEST OF THERMAL RELEASE MECHANISM
ISO/TS 29761:2015 Fire safety engineering — Selection of design occupant behavioural scenarios
BS EN 50399:2011 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
UNI EN 15254-6 : 2014 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
I.S. EN 15269-3:2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE
DIN EN 1366-12:2014-12 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK
ISO 10294-5:2005 Fire resistance tests Fire dampers for air distribution systems Part 5: Intumescent fire dampers
PREN 13501-6 : DRAFT 2017 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
I.S. EN 60695-1-40:2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials — Their development and application
ISO 16312-1:2016 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria
ISO/TS 14934-4:2007 Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
ISO/TR 16312-2:2007 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models
UNE-EN 15254-6:2015 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling
BIS IS 11000-1-40 : 2015 FIRE HAZARD TESTING - PART 1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - SECTION 40: INSULATING LIQUIDS
UNE-EN 15269-3:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
PREN 45545-1 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
I.S. EN 60695-11-10:2013 FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013 (EQV))
CEI 89-29 : 2010 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
UNI EN 13501-1 : 2009 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
EN 1364-2:2018 Fire resistance tests for non-loadbearing elements - Part 2: Ceilings
I.S. EN 13501-6:2014 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
I.S. ENV 1187:2002 TEST METHODS FOR EXTERNAL FIRE EXPOSURE TO ROOFS
UNI EN 16035 : 2013 HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
PREN 13381-5 : DRAFT 2011 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
I.S. EN 60695-6-2:2011 FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011)
ASTM D 1230 : 2017 : REDLINE Standard Test Method for Flammability of Apparel Textiles
UNE-EN 15269-5:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
ASTM E 2632/E2632M : 2013 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
UNI CEI EN 45545-3 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
CEI EN 60695-10-3 : 2004 FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST
ASTM E 1822 : 2017 : REDLINE Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 1776 : 2016 : REDLINE Standard Guide for Development of Fire-Risk-Assessment Standards
ASTM F 1870 : 2016 : REDLINE Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ISO 14934-4:2014 Fire tests Calibration and use of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
IEC TS 60695-8-3:2008 Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products
ONORM EN 1366-12 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK
ISO/TS 5660-3:2012 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
ISO 12949:2011 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
ISO/TR 834-2:2009 Fire-resistance tests Elements of building construction Part 2: Guidance on measuring uniformity of furnace exposure on test samples
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
ISO 21367:2007 Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
EN 15269-11:2018 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains
BS EN 13501-1 : 2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
ISO/TR 5659-3:1999 Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method
ISO 16730-1:2015 Fire safety engineering Procedures and requirements for verification and validation of calculation methods Part 1: General
ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire effluents Part 1: General
ISO 871:2006 Plastics Determination of ignition temperature using a hot-air furnace
ISO 10295-2:2009 Fire tests for building elements and components Fire testing of service installations Part 2: Linear joint (gap) seals
IEC TR 60695-8-2:2008 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
EN 60695-2-13:2010/A1:2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014)
DIN EN 1366-4:2010-08 Fire resistance tests for service installations - Part 4: Linear joint seals (includes Amendment A1:2010)
DIN EN 1365-1:2013-08 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS
DIN EN 1366-7:2004-09 Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
DIN EN 1365-5:2005-02 Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways; German version EN 1365-5:2004
DIN EN 1365-2:2015-02 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS
DIN EN ISO 4589-2 E : 2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN 1634-3:2005-01 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
DIN EN 14470-2:2006-11 Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
DIN EN ISO 13927:2015-08 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
DIN EN 14470-1:2004-07 Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids
BS EN 60695-1-21:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
BS EN 1365-5:2004 Fire resistance tests for loadbearing elements Balconies and walkways
UNE-EN 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
IEC TS 60695-9-2:2005 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
IEC 60695-6-2:2011 Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
IEC 60695-5-1:2002 Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
BS EN ISO 4589-3:2017 Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test
IEC 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
UNE-EN 1365-1:2016 Fire resistance tests for loadbearing elements - Part 1: Walls
IEC 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
ISO/TR 10093:2017 Plastics Fire tests Standard ignition sources
IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
UNE-EN 60332-1-3:2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
I.S. EN ISO 1182:2010 REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST
ONORM EN 13381-1 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
UNI EN 1366-1 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
UNE-EN 15269-1:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
ONORM EN 1366-1 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
UNE-EN 13501-4:2007 Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems
UNE-EN 60332-1-2:2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
ASTM E 603 : 2017 : REDLINE Standard Guide for Room Fire Experiments
ASTM D 6113 : 2016 : REDLINE Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ONORM EN 15269-1 : 2010 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
EN 15269-20:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
I.S. EN 13823:2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
ONORM EN ISO 1182 : 2010 REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST
UNI EN ISO 1182 : 2010 REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST
UNI EN 13823 : 2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
EN 1366-2:2015 Fire resistance tests for service installations - Part 2: Fire dampers
I.S. EN 12101-6:2005 SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS
UNI EN 1366-8 : 2005 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 8: SMOKE EXTRACTION DUCTS
UNI EN ISO 15791-1 : 2014 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
ENV 1363-3:1998 Fire resistance tests - Part 3: Verification of furnace performance
UNI EN ISO 340 : 2013 CONVEYOR BELTS - LABORATORY SCALE FLAMMABILITY CHARACTERISTICS - REQUIREMENTS AND TEST METHOD
UNI EN 1634-3 : 2005 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
UNI EN 1364-3 : 2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
UNI EN 1365-6 : 2005 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 6: STAIRS
UNI EN ISO 9239-1 : 2010 REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE
UNI EN 1364-4 : 2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
UNI EN 13501-3 : 2009 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS
UNI EN 1365-2 : 2014 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS
CLC/TS 45545-5:2009 Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
UNI EN 13238 : 2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES
UNE-EN 1366-10:2016 Fire resistance tests for service installations - Part 10: Smoke control dampers
08/30186613 DC : DRAFT OCT 2008 BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
DD IEC/TS 60695-2-20:2004 Fire hazard testing Glowing/hot wire based test methods - Hot-wire coil ignitability. Apparatus, test method and guidance
DIN 18230-3:2002-08 STRUCTURAL FIRE PROTECTION IN INDUSTRIAL BUILDINGS - PART 3: VALUES FOR CALCULATION
I.S. EN 15269-11:2018+AC:2019 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE FOR OPERABLE FABRIC CURTAINS
DD ENV 13381-5:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet composite members
BS EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns
I.S. EN 60695-1-21:2016 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
ENV 13381-2:2002 Test methods for determining the contribution to the fire resistance of stuctural members - Part 2: Vertical protective membranes
ENV 13381-3:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
09/30206609 DC : 0 BS EN 60695-11-10 ED.2 - FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS
12/30255590 DC : 0 BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES
BS ISO 9772:2012 Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame
13/30267104 DC : 0 BS EN 13381-9 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS
UNI CEI CEN/TS 45545-3 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
DIN EN 1364-5 E : 2017 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
16/30321760 DC : 0 BS ISO 12992 - PLASTICS - VERTICAL FLAME SPREAD DETERMINATION FOR FILM AND SHEET
ISO/TR 834-3:2012 Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
UNE-EN 60695-1-40:2014 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
08/30186609 DC : DRAFT OCT 2008 BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
I.S. EN 60684-2:2011 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
PREN 50399-2-2 : DRAFT 2003 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-2: PROCEDURE FOR CLASSIFICATION IN EUROCLASS B
UNI EN 13381-4 : 2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
03/110116 DC : DRAFT JULY 2003 EN ISO 340 - CONVEYOR BELTS - LABORATORY-SCALE FLAMMABILITY CHARACTERISTICS - REQUIREMENTS AND TEST METHOD
BS ISO 21927-7:2017 Smoke and heat control systems Smoke ducts sections
BS ISO 13344:2015 Estimation of the lethal toxic potency of fire effluents
I.S. EN 60695-2-13:2010 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
DIN EN 13381-2:2014-12 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
08/30186617 DC : DRAFT OCT 2008 BS EN 13381-6 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
ISO 19706:2011 Guidelines for assessing the fire threat to people
17/30348256 DC : 0 BS EN 13501-6 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
ASTM E 2067 : 2015 : REDLINE Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
09/30186600 DC : 0 BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
BS ISO 12992:2017 Plastics. Vertical flame spread determination for film and sheet
BS EN 60695-2-13 : 2010 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
I.S. EN 50575:2014 POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
BS EN 15269-3:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
DD CEN/TS 45545-4:2009 Railway applications. Fire protection on railway vehicles Fire safety requirements for railway rolling stock design
BS EN 60695-4:2012 Fire hazard testing Terminology concerning fire tests for electrotechnical products
10/30207740 DC : 0 BS ISO 12949 - STANDARD TEST METHOD FOR MEASURING THE HEAT RELEASE RATE OF LOW FLAMMABILITY MATTRESSES AND MATTRESS SET
ISO/TR 13387-2:1999 Fire safety engineering Part 2: Design fire scenarios and design fires
BS EN 60332-1-3 : 2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES
DIN EN 13381-6:2012-09 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
09/30202122 DC : 0 BS ISO 12863 - STANDARD TEST METHOD FOR MEASURING THE IGNITION PROPENSITY OF CIGARETTES
BS EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes
ASTM E 2257 : 2017 : REDLINE Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
17/30348262 DC : 0 BS EN 13501-1 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS
BS EN 15377-1:2008 Heating systems in buildings. Design of embedded water based surface heating and cooling systems Determination of the design heating and cooling capacity
ISO/TS 17431:2006 Fire tests Reduced-scale model box test
UNI EN 15080-8 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
PREN 50200 : DRAFT 2013 METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS
DIN EN 13381-4:2013-08 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
16/30323587 DC : DRAFT JAN 2016 BS EN ISO 5659-2 - PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST
PD ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace
I.S. EN 60695-11-4:2011 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011)
03/110059 DC : 0 BS EN 45545-4 - RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS OF RAILWAY ROLLING STOCK DESIGN
ISO 10295-1:2007 Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals
DD ISO/TS 22269:2005 Reaction to fire tests. Fire growth. Full-scale test for stairs and stair coverings
12/30271389 DC : 0 BS EN 1365-2 - FIRE RSISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS
14/30280977 DC : 0 BS ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY
BS ISO/TR 5659-3:1999 Plastics. Smoke generation Determination of optical density by a dynamic flow method
ISO 834-12:2012 Fire resistance tests Elements of building construction Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
04/30124505 DC : 0 EN 15080-8 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
BS ISO 834-11:2014 Fire resistance tests. Elements of building construction Specific requirements for the assessment of fire protection to structural steel elements
BS EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members Applied passive protection products to steel members
BS EN 1366-12:2014 Fire resistance tests for service installations Non-mechanical fire barrier for ventilation ductwork
DD ENV 13381-7:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to timber members
PD ISO/TS 13447:2013 Fire safety engineering. Guidance for use of fire zone models
UNI CEI CEN/TS 45545-2 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
11/30252455 DC : 0 BS EN 1364-4 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
DIN EN 12101-8:2011-08 Smoke and heat control systems - Part 8: Smoke control dampers
BS EN 60695-11-5:2017 Fire hazard testing Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance
ISO/TR 22899-2:2013 Determination of the resistance to jet fires of passive fire protection Part 2: Guidance on classification and implementation methods
ISO 21927-3:2006 Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators
03/308231 DC : 0 EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS
05/30127789 DC : DRAFT JAN 2005 IEC 60695-2-13 ED.2 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY TEST METHOD FOR MATERIALS
I.S. EN 1366-9:2008 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
12/30259154 DC : 0 BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
11/30196234 DC : 0 BS EN ISO 5659-2 - PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST
DIN EN 45545-4:2015-11 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN
11/30252458 DC : 0 BS EN 1364-3 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
PD ISO/TR 16576:2017 Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria
BS EN 60695-7-2:2011 Fire hazard testing Toxicity of fire effluent. Summary and relevance of test methods
07/30169687 DC : 0 BS EN 60695-1-11 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT
UNI CEI CLC/TS 45545-5 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
UNI EN 12101-8 : 2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS
BS EN ISO 19353:2016 Safety of machinery. Fire prevention and fire protection
09/30206605 DC : 0 BS EN 60695-2-10 ED.2 - FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
UNI EN 15650 : 2010 VENTILATION FOR BUILDINGS - FIRE DAMPERS
BS EN 60695-11-20:2015 Fire hazard testing Test flames. 500 W flame test methods
UNI CEI CEN/TS 45545-1 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 1: GENERAL
I.S. EN 60695-6-1:2005 FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE
ISO/TR 13387-3:1999 Fire safety engineering Part 3: Assessment and verification of mathematical fire models
ASTM E 1740 : 2015 : REDLINE Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
I.S. CLC/TR 50670:2016 EXTERNAL FIRE EXPOSURE TO ROOFS IN COMBINATION WITH PHOTOVOLTAIC (PV) ARRAYS - TEST METHOD(S)
UNI EN 15882-3 : 2009 EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
UNI EN 2826 : 2012 AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF GAS COMPONENTS IN THE SMOKE
PD IEC/TS 60695-1-14:2017 Fire hazard testing Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products
UNE-EN 60695-11-4:2012 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
BS EN ISO 1716:2010 Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
DD CEN/TS 45545-2:2009 Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components
ISO 12468-2:2013 External exposure of roofs to fire Part 2: Classification of roofs
UNI EN 15882-4 : 2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
ASTM E 1590 : 2017 : REDLINE Standard Test Method for Fire Testing of Mattresses
BS ISO 21927-2 : 2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS
ISO/TS 24679:2011 Fire safety engineering Performance of structures in fire
UNE-EN 60695-2-11:2015 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
I.S. EN 15254-6:2014 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
I.S. EN ISO 25762:2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
I.S. EN 13381-8:2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS
UNE-EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
ISO 6944-2:2009 Fire containment Elements of building construction Part 2: Kitchen extract ducts
S.R. CLC/TS 45545-5:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
I.S. EN 60695-1-10:2017 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
I.S. EN 60695-11-3:2012 FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS (IEC 60695-11-3:2012 (EQV))
ISO 13571:2012 Life-threatening components of fire Guidelines for the estimation of time to compromised tenability in fires
ISO 12472:2003 Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
ISO/TS 13447:2013 Fire safety engineering — Guidance for use of fire zone models
I.S. EN 60695-1-20:2016 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
I.S. EN 15882-4:2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
S.R. CEN/TS 45545-3:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
I.S. EN 60695-8-1:2017 FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE
ISO/TR 17252:2008 Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering
ISO 5658-4:2001 Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
UNE-EN 60695-7-3:2012 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
I.S. EN 12101-7:2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
EN 60695-4:2012 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012)
I.S. EN ISO 12863:2010 STANDARD TEST METHOD FOR ASSESSING THE IGNITION PROPENSITY OF CIGARETTES
ISO 3008:2007 Fire-resistance tests Door and shutter assemblies
ISO/TS 5660-4:2016 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release
16/30324101 DC : 0 BS EN 13381-10 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
PREN 45545-4 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN
16/30324104 DC : 0 BS EN 1364-6 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 6: CAVITY BARRIERS
BS EN 60695-1-30:2017 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process. General guidelines
17/30304297 DC : 0 BS EN 17084 - RAILWAY APPLICATIONS - FIRE PROTECTION IN RAILWAY VEHICLES - TOXICITY TEST OF MATERIALS AND COMPONENTS
UNI EN 1366-5 : 2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
EN 13501-6:2014 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
17/30296747 DC : 0 BS EN 15650 - VENTILATION FOR BUILDINGS - FIRE DAMPERS
ISO/TR 24679-4:2017 Fire safety engineering — Performance of structures in fire — Part 4: Example of a fifteen-storey steel-framed office building
BS ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire effluents General
15/30327624 DC : 0 BS EN 15269-6 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 6: FIRE RESISTANCE OF SLIDING TIMBER DOORSETS
DIN EN ISO 19353 E : 2016 SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015)
ISO/TS 15791-2:2017 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
PREN 13501-4 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
CEI EN 60695-7-3 : 2013 FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS
ASTM E 2632/E2632M : 2013 : EDT 1 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
ISO 21927-8:2017 Smoke and heat control systems — Part 8: Smoke control dampers
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
ISO 5660-4:2008 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility
ISO/TR 13571-2:2016 Life-threatening components of fire Part 2: Methodology and examples of tenability assessment
ISO 5925-1:2007 Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests
ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
ISO/TR 15658:2009 Fire resistance tests Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation
IEC 60695-2-11 REDLINE : 2ED 2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT)
ISO 19701:2013 Methods for sampling and analysis of fire effluents
ISO 14934-3:2012 Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
ISO 13784-1:2014 Reaction to fire test for sandwich panel building systems — Part 1: Small room test
S.R. CEN/TS 45545-7:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
ISO 14696:2009 Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
IEC TS 60695-11-40:2002 Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance
IEC TS 60695-11-11:2016 Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source
IEC TS 60695-11-3:2004 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
ISO/TS 22269:2005 Reaction to fire tests Fire growth Full-scale test for stairs and stair coverings
IEC TR 60695-1-21:2008 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
I.S. EN 60695-7-1:2010 FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENTS - GENERAL GUIDANCE
I.S. EN 15882-3:2009 EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
I.S. EN 61034-2:2005 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS (IEC 61034-2:2005 (EQV))
DIN EN 13823:2015-02 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
IEC 60695-1-30:2017 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
IEC TS 60695-11-21:2005 Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials
I.S. CEN/TS 15447:2006 MOUNTING AND FIXING IN REACTION TO FIRE TESTS UNDER THE CONSTRUCTION PRODUCTS DIRECTIVE
ISO 16730:2008 Fire safety engineering Assessment, verification and validation of calculation methods
I.S. EN 2826:2011 AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF GAS COMPONENTS IN THE SMOKE
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
DIN EN 1366-8:2004-10 Fire resistance tests for service installations - Part 8: Smoke extraction ducts; German version EN 1366-8:2004
ISO 16732-1:2012 Fire safety engineering Fire risk assessment Part 1: General
UNE-EN ISO 13927:2016 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
BS EN 13823:2010+A1:2014 Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
DIN EN 14390 E : 2007 FIRE TEST - LARGE-SCALE ROOM REFERENCE TEST FOR SURFACE PRODUCTS
BS EN 12101-6:2005 Smoke and heat control systems Specification for pressure differential systems. Kits
IEC 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
UNE-EN ISO 11925-2:2011 Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010)
BS EN 14135:2004 Coverings. Determination of fire protection ability
BS EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test
IEC 60695-11-4:2011 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
ONORM EN 1363-1 : 2012 FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS
ISO 13927:2015 Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
ISO/TS 80004-6:2013 Nanotechnologies Vocabulary Part 6: Nano-object characterization
IEC 60695-9-1:2013 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance
IEC TS 60695-7-3:2004 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
BS EN 1366-1:2014 Fire resistance tests for service installations Ventilation ducts
DD IEC TS 60695-9-2 : DRAFT 2005 FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
IEC 60332-1-3:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for determination of flamingdroplets/particles
BS IEC/TS 60695-8-2:2001 Fire hazard testing. Heat release Summary and relevance of test methods
EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
BS EN ISO 4589-1:2017 Plastics. Determination of burning behaviour by oxygen index General requirements
UNI EN 1363-1 : 2012 FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS
BS EN 13501-2 : 2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES
UNE-EN 15650:2010 Ventilation for buildings - Fire dampers
BS IEC TS 60695-9.2 : 2001 FIRE HAZARD TESTING - PART 9-2 - SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
BS EN 1364-4:2014 Fire resistance tests for non-loadbearing elements Curtain walling. Part configuration
BS EN 60695-9-2:2014 Fire hazard testing Surface spread of flame. Summary and relevance of test methods
BS EN 60695-8-2:2017 Fire hazard testing Heat release. Summary and relevance of test methods
BS EN 1366-3:2009 Fire resistance tests for service installations Penetration seals
UNE-EN 1366-3:2011 Fire resistance tests for service installations - Part 3: Penetration seals
BS EN ISO 11925-2:2010 Reaction to fire tests. Ignitability of products subjected to direct impingement of flame Single-flame source test
IEC 60695-1-11:2014 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
UNE-EN 1366-1:2016 Fire resistance tests for service installations - Part 1: Ventilation ducts
09/30193524 DC : 0 BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY
UNE-EN 1365-2:2016 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
UNE-EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
I.S. EN ISO 11925-2:2010 REACTION TO FIRE TESTS - IGNITABILITY OF BUILDING PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
BS EN 1363-1:2012 Fire resistance tests General requirements
IEC 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
ISO 21542:2011 Building construction Accessibility and usability of the built environment
UNE-EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements
IEC 60695-6-1:2005+AMD1:2010 CSV Fire hazard testing - Part 6-1: Smoke obscuration - General guidance
IEC 60695-4:2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
IEC TS 62933-5-1:2017 Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification
IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
CEN/TS 16459:2013 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187
IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
UNE-EN ISO 5659-2:2018 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
UNE-ISO 21542:2012 Building construction. Accessibility and usability of the built environment.
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
ISO 4589-3:2017 Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
BS EN 1366-8:2004 Fire resistance tests for service installations Smoke extraction ducts
BS EN 1365-6:2004 Fire resistance tests for loadbearing elements Stairs
IEC TR 62222:2012 Fire performance of communication cables installed in buildings
ISO 4589-1:2017 Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
BS EN 1364-3:2014 Fire resistance tests for non-loadbearing elements Curtain walling. Full configuration (complete assembly)
IEC 60695-1-10:2016 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
BS EN ISO 13927:2015 Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
UNE-EN 1364-4:2015 Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
UNE-EN 60695-7-2:2012 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
BS EN 1364-1:2015 Fire resistance tests for non-loadbearing elements Walls
BS EN ISO 1182:2010 Reaction to fire tests for products. Non-combustibility test
UNE-EN 60695-11-20:2016 Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods
UNE-EN ISO 19353:2016 Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)
UNE-EN 60695-11-10:2014 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
BS EN 12101-1 : 2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
UNE-EN ISO 9239-1:2011 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
ISO 25762:2009 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
UNE-EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017)
UNE-EN 1366-2:2015 Fire resistance tests for service installations - Part 2: Fire dampers
BS EN 1365-2:2014 Fire resistance tests for loadbearing elements Floors and roofs
UNE-EN 60695-4:2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
EN 1365-2:2014 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
EN 15269-10:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
EN 15882-4:2012 Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
EN 14135:2004 Coverings - Determination of fire protection ability
EN 1365-6:2004 Fire resistance tests for loadbearing elements - Part 6: Stairs
EN 15269-3:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
EN 1366-12:2014 Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
EN 15269-5:2014+A1:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
EN 1366-8:2004 Fire resistance tests for service installations - Part 8: Smoke extraction ducts
UNI EN 1366-3 : 2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
EN 15254-6 : 2014 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
EN 14470-1:2004 Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids
EN ISO 9239-1:2010 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
EN ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017)
EN 1364-3:2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
EN 1634-3:2004/AC:2006 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
EN 14470-2:2006 Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
EN 2826:2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke
EN 1366-9:2008 Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
EN 1364-4:2014 Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
EN 1365-1:2012/AC:2013 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS
EN 1365-5:2004 Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
EN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
EN 16035:2012 Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
EN 14390:2007 Fire test - Large-scale room reference test for surface products
EN 1366-10:2011+A1:2017 Fire resistance tests for service installations - Part 10: Smoke control dampers
EN ISO 4589-3:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
EN 15080-8:2009 Extended application of results from fire resistance tests - Part 8: Beams
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN 1364-1:1999 Fire resistance tests for non-loadbearing elements - Part 1: Walls
EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
EN 15269-2 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
EN ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
EN 16733:2016 Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering
EN ISO 340:2013 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013)
EN 1366-6:2004 Fire resistance tests for service installations - Part 6: Raised access and hollow core floors
EN 15650:2010 Ventilation for buildings - Fire dampers
EN 1364-5:2017 Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
ISO 3008-2:2017 Fire-resistance tests — Part 2: Lift landing door assemblies
S.R. CEN/TS 45545-1:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
ISO/TR 12470-1:2017 Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 1: Loadbearing elements and vertical and horizontal separating elements
DIN EN 13381-3:2015-06 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
BS ISO 10295-2:2009 Fire tests for building elements and components. Fire testing of service installations Linear joint (gap) seals
UNE-EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
07/30172821 DC : 0 BS ISO 10295-2 - FIRE TESTS FOR BUILDING ELEMENTS AND COMPONENTS - FIRE TESTING OF SERVICE INSTALLATIONS - PART 2: LINEAR JOINT (GAP) SEALS
13/30282376 DC : 0 BS EN 50200 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS
BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
DD IEC TS 60695-1-20 : DRAFT MAR 2008 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
12/30260450 DC : 0 BS EN 50577 - ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION)
BS EN 60695-8-1:2017 Fire hazard testing Heat release. General guidance
ISO 23932:2009 Fire safety engineering General principles
DD ISO/TS 24679:2011 Fire safety engineering. Performance of structures in fire
DD ENV 13381-4:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to steel members
NF ISO 13344 : 2016 ESTIMATION OF THE LETHAL TOXIC POTENCY OF FIRE EFFLUENTS
13/30292037 DC : 0 BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS
PREN 13501-1 : DRAFT 2017 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS
06/30090268 DC : DRAFT FEB 2006 ISO 21489 - FIRE TESTS - METHOD OF MEASUREMENT OF GASES USING FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR) IN CUMULATIVE SMOKE TEST
01/208798 DC : DRAFT JAN 2002 IEC 60695-5-3 TS - FIRE HAZARD TESTING - PART 5-3: CORROSION DAMAGEEFFECTS OF FIRE EFFLUENT - LEAKAGE CURRENT AND METAL LOSS TEST METHOD
BS EN 60695-11-2:2017 Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
10/30216236 DC : DRAFT JAN 2010 BS EN 60695-11-4 - FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHODS
16/30331280 DC (published 2016-04) BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies
BS ISO 27368:2008 Analysis of blood for asphyxiant toxicants. Carbon monoxide and hydrogen cyanide
XP ISO/TS 24679 : 2011 XP FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE
UNI CEI EN 45545-4 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN
I.S. ENV 13381-7:2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS
BS ISO/TR 13387-3:1999 Fire safety engineering Assessment and verification of mathematical fire models
IEC TS 60695-8-2:2000 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
UNE-EN 15269-2:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
10/30216933 DC : 0 BS EN 50553 - RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK
UNE-EN 60695-11-3:2013 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
UNE-EN 12101-8:2015 Smoke and heat control systems - Part 8: Smoke control dampers
DD IEC/TS 60695-11-4:2004 Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method
DIN EN 45545-3:2013-08 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
BS EN 50577:2015 Electric cables. Fire resistance test for unprotected electric cables (P classification)
I.S. EN 15269-2:2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
BS ISO 21927-3 : 2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS
DD CEN/TS 15447:2006 Mounting and fixing in reaction to fire tests under the Construction Products Directive
EN 15254-7:2018 Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
PREN 13501-2 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES
04/30115497 DC : 0 EN 45545-6 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS
DIN EN 16733 E : 2016 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT&#39;S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
CEI EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
UNI CEI CEN/TS 45545-6 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS
ONORM EN 1366-4 : 2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
10/30198657 DC : 0 BS EN 60695-7-1 - FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE
I.S. EN 13381-6:2012 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
04/30111085 DC : DRAFT MARCH 2004 IEC 61064-2 ED.3 - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2 - TEST PROCEDURE AND REQUIREMENTS
12/30211334 DC : 0 BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO/DIS 15791-1:2012)
10/30219810 DC : 0 BS EN 45545-5 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
08/30154274 DC : DRAFT MAR 2008 BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES
UNI EN 1366-12 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK
DIN EN 12101-7:2011-08 Smoke and heat control systems - Part 7: Smoke duct sections
14/30255905 DC : 0 BS ISO 9705-1 - REACTION TO FIRE TESTS - ROOM CORNER TEST FOR WALL AND CEILING LINING PRODUCTS - PART 1: TEST METHOD FOR SMALL ROOM CONFIGURATION
PD ISO/TS 5660-3:2012 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement
DIN EN 13381-1:2014-12 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
PREN 50399-2-1 : DRAFT 2003 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-1: PROCEDURE FOR CLASSIFICATION IN EUROCLASSES C AND D
PD ISO/TR 24679-4:2017 Fire safety engineering. Performance of structures in fire Example of a fifteen-storey steel-framed office building
08/30167713 DC : DRAFT JUNE 2008 BS ISO 6944-2 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - KITCHEN EXTRACT DUCTS
UNE-EN 60695-2-13:2011 Fire hazard testing -- Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
17/30357883 DC : 0 BS IEC 60695-2-14 ED.1.0 - FIRE HAZARD TESTING - PART 2-14: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE TEST METHOD FOR END PRODUCTS (GWITEP)
DIN EN 15650:2010-09 Ventilation for buildings - Fire dampers
PD ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials. Their development and application
10/30216693 DC : 0 BS EN 45545-4 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN
05/30135949 DC : DRAFT JUL 2005 IEC 60695-1-30 ED 2 - FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - USE OF PRESELECTION TESTING PROCEDURES
08/30192184 DC : 0 ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY
BS EN 13381-5:2014 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet steel composite member
UNE-EN 13381-6:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
UNE-ISO 16733-1:2017 Fire safety engineering.Selection of design fire scenarios and design fires.Part 1: Selection of design fire scenarios
DIN EN 1366-5:2010-06 Fire resistance tests for service installations - Part 5: Service ducts and shafts
IEC TS 60695-6-30:2013 Fire hazard testing - Part 6-30: Smoke obscuration - Small-scale static method - Apparatus
BS EN 15269-5 : 2014 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
BS ISO 5660-1:2015 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
DIN EN 15269-3:2012-10 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
18/30370902 DC BS ISO 3008-1. Fire resistance tests. Door and shutter assemblies Part 1. General requirements
I.S. EN ISO 19353:2016 SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015)
PD ISO/TR 12470-2:2017 Fire-resistance tests. Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Non-loadbearing elements
UNI CEI CEN/TS 45545-4 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR RAILWAY ROLLING STOCK DESIGN
BS EN 1366-9:2008 Fire resistance tests for service installations Single compartment smoke extraction ducts
UNI EN 1366-10 : 2011 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS
BS EN 60695-2-10:2013 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
ASTM F 1550 : 2016 : REDLINE Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
NF ISO 19703 : 2010 GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES
FD ISO/TR 16738 : 2009 FD FIRE-SAFETY ENGINEERING - TECHNICAL INFORMATION ON METHODS FOR EVALUATING BEHAVIOUR AND MOVEMENT OF PEOPLE
12/30252461 DC : DRAFT JAN 2012 BS EN 13501-6 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES
ISO 9239-2:2002 Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
08/30171902 DC : 0 BS EN ISO 1182 - REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - NON-COMBUSTIBILITY TEST
BS EN 60332-1-2 : 2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004)
BS EN 15882-4:2012 Extended application of results from fire resistance tests for service installations Linear joint seals
06/30153120 DC : DRAFT JULY 2006
UNE-EN 60695-1-11:2016 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
16/30291954 DC : 0 BS ISO 24678 - FIRE SAFETY ENGINEERING - REQUIREMENTS GOVERNING ALGEBRAIC EQUATIONS - PART 6: FLASHOVER RELATED PHENOMENA
BS EN 15254-6:2014 Extended application of results from fire resistance tests. Non-loadbearing walls Curtain walling
ISO 27368:2008 Analysis of blood for asphyxiant toxicants — Carbon monoxide and hydrogen cyanide
UNE-EN 50575:2015 Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
04/30090250 DC : DRAFT APR 2004 BS ISO 14934-2 - REACTION TO FIRE TESTS - CALIBRATION AND USE OF HEAT FLUX METERS - PART 2: PRIMARY CALIBRATION METHODS
BS ISO 21927-8:2017 Smoke and heat control systems Smoke control dampers
ENV 13381-5:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members
UNE-EN 1366-12:2015 Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
13/30246948 DC : 0 BS ISO 17554 - REACTION TO FIRE TESTS - MASS LOSS MEASUREMENT
10/30216139 DC : 0 BS EN 60695-11-3 - FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS
06/30144845 DC : DRAFT JAN 2006 IEC 60695-1-21 - FIRE HAZARD TESTING - PART 1-21: IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
ASTM E 2335 : 2017 : REDLINE Standard Guide for Laboratory Monitors
BS EN 15269-10:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware Fire resistance of steel rolling shutter assemblies
BS ISO 25762 : 2009 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
05/30134009 DC : DRAFT MAY 2005 EN 15254-1 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 1: GENERAL
DD CEN/TS 45545-3:2009 Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers
08/30171906 DC : 0 BS EN ISO 1716 - REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF THE HEAT OF COMBUSTION
03/110060 DC : 0 BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
CEI EN 60695-8-2 : 2ED 2017 FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
ENV 13381-7:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
BS ISO 21927-1:2008 Smoke and heat control systems Specification for smoke barriers
IEC TS 60695-11-4:2004 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
UNI EN 12101-7 : 2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
UNE-EN 15269-7:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
I.S. EN 60695-2-12:2010 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
ISO 24678-6:2016 Fire safety engineering — Requirements governing algebraic formulae — Part 6: Flashover related phenomena
UNI EN 13381-6 : 2012 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
UNE-EN 13381-1:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
I.S. EN 60332-1-1:2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS
ISO 834-5:2000 Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements
CEI EN 60695-1-40 : 2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
ISO/TR 16576:2017 Fire safety engineering Examples of fire safety objectives, functional requirements and safety criteria
I.S. EN 13381-4:2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
UNE-ISO 23932:2017 Fire safety engineering. General principles
I.S. EN 15269-10:2011 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES
I.S. EN 15882-1:2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS
ISO 12468-1:2013 External exposure of roofs to fire Part 1: Test method
ISO 14934-1:2010 Fire tests Calibration and use of heat flux meters Part 1: General principles
ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace
I.S. EN 45545-3:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
I.S. EN 16733:2016 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT&#39;S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
UNE-EN 15080-8:2011 Extended application of results from fire resistance tests - Part 8: Beams
I.S. EN 60695-9-1:2013 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013 (EQV))
ISO/TR 13387-6:1999 Fire safety engineering Part 6: Structural response and fire spread beyond the enclosure of origin
I.S. EN 60332-1-3:2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES
DIN EN 13501-1:2010-01 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
PD CEN/TS 16459:2013 External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187
IEC 60695-1-10 REDLINE : 2ED 2016 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
UNE-EN 60695-6-2:2012 Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
UNI EN 15269-1 : 2010 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
UNE-EN 60695-2-12:2011 Fire hazard testing -- Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
ISO/TR 12470-2:2017 Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 2: Non-loadbearing elements
ISO 834-4:2000 Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements
ISO/TR 10295-3:2012 Fire tests for building elements and components Fire testing of service installations Part 3: Single component penetration seals Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
ISO 21927-7:2017 Smoke and heat control systems — Part 7: Smoke ducts sections
UNI EN 15269-2 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
17/30359220 DC : 0 BS EN 15269-20 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS
ISO 3008-3:2016 Fire resistance tests Part 3: Door and shutter assemblies horizontally oriented
ISO 19353:2015 Safety of machinery Fire prevention and fire protection
UNE-EN 13381-9:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
ISO 29473:2010 Fire tests — Uncertainty of measurements in fire tests
I.S. EN 1366-5:2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
EN 15254-5:2018 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction
ISO 29904:2013 Fire chemistry Generation and measurement of aerosols
ISO 14934-2:2013 Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
I.S. EN 15254-5:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
ISO 15928-4:2017 Houses — Description of performance — Part 4: Fire safety
I.S. EN 1364-2:2018 FIRE RESISTANCE FOR TESTS FOR NON-LOADBEARING ELEMENTS - PART 2: CEILINGS
I.S. EN 15650:2010 VENTILATION FOR BUILDINGS - FIRE DAMPERS
IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
I.S. EN 60695-1-30:2017 FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES
BS EN 13823 : 2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 1363-1:2012 Fire resistance tests - Part 1: General Requirements
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN 50553 : 2012 AMD 1 2016 RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK
EN 61034-2:2005/A1:2013 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS (IEC 61034-2:2005/A1:2013)
EN 61034-1:2005/A1:2014 MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS (IEC 61034-1:2005/A1:2013)
EN 45545-1 : 2013 COR 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
CEN/TS 45545-1:2009 Railway applications - Fire protection on railway vehicles - Part 1: General
DIN EN ISO 15791-1:2014-05 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
DIN EN 13501-3:2010-02 Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers (includes Amendment A1:2009)
DIN EN ISO 340 E : 2013 CONVEYOR BELTS - LABORATORY SCALE FLAMMABILITY CHARACTERISTICS - REQUIREMENTS AND TEST METHOD (ISO 340:2013)
I.S. EN 1363-1:2012 FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS
BS EN 1366-7:2004 Fire resistance tests for service installations Conveyor systems and their closures
BS EN 14470-1:2004 Fire safety storage cabinets Safety storage cabinets for flammable liquids
BS EN ISO 340:2013 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
13/30277762 DC : 0 BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
UNI EN ISO 11925-2 : 2010 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
UNE-EN 60695-1-21:2017 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
BS EN 13501-5:2016 Fire classification of construction products and building elements Classification using data from external fire exposure to roofs tests
BS EN 1366-2:2015 Fire resistance tests for service installations Fire dampers
ISO 9239-1:2010 Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
BS EN 60695-6-2:2011 Fire hazard testing Smoke obscuration. Summary and relevance of test methods
ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
BS EN 13238:2010 Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
PD IEC/TR 60695-8-2:2008 Fire hazard testing Heat release. Summary and relevance of test methods
ISO 5659-2:2017 Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
BS EN ISO 9239-1:2010 Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source
04/30111706 DC : DRAFT MAR 2004 IEC 60695-9-2 ED.2 - FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
DIN EN ISO 340:2013-10 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013)
CEN/TS 1187:2012 Test methods for external fire exposure to roofs
EN 1366-3:2009 Fire resistance tests for service installations - Part 3: Penetration seals
EN 60695-7-1:2010 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance
DIN EN ISO 4589-1:1999-09 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
CEN/TS 13381-1:2005 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
CEN/TS 15447:2006 Mounting and fixing in reaction to fire tests under the Construction Products Directive
CEN/TS 45545-2:2009 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
EN 12101-8:2011 Smoke and heat control systems - Part 8: Smoke control dampers
DIN EN 14135:2004-11 Coverings - Determination of fire protection ability; German version EN 14135:2004
EN 60695-1-40:2014 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
EN 45545-4:2013 Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design
IEC 60695-11-2:2017 Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
DIN EN ISO 11925-2:2011-02 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
EN 50399 : 2011 AMD 1 2016 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
DIN EN ISO 19353:2016-07 SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015)
EN 60695-6-2 : 2011 FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011)
CEN/TS 45545-3:2009 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
EN 60332-1-1:2004/A1:2015 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
EN 13381-9:2015 Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
ENV 1187:2002/A1:2005 TEST METHODS FOR EXTERNAL FIRE EXPOSURE TO ROOFS
EN 60695-1-20 : 2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
EN 60695-8-1:2017 Fire hazard testing - Part 8-1: Heat release - General guidance
IEC 60695-11-5:2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
EN 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
EN 60695-9-1:2013 FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013)
EN 50200:2015 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
UNE-EN 13823:2012 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
UNE-EN 13501-3:2007 Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers

ISO 6182-7:2004 Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers
ISO 6707-1:2017 Buildings and civil engineering works Vocabulary Part 1: General terms
ISO 871:2006 Plastics Determination of ignition temperature using a hot-air furnace
IEC 60695-4:2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
ISO 14934-1:2010 Fire tests Calibration and use of heat flux meters Part 1: General principles
ISO 80000-7:2008 Quantities and units Part 7: Light
ISO 10241-1:2011 Terminological entries in standards — Part 1: General requirements and examples of presentation
ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire effluents Part 1: General
ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.