ISO 14130:1997
Current
Current
The latest, up-to-date edition.
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
12-11-1997
Committee |
ISO/TC 61/SC 13
|
DevelopmentNote |
Supersedes ISO 4585 (04/2001)
|
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN ISO 14130:1999 | Identical |
NF EN ISO 14130 : 1998 | Identical |
NBN EN ISO 14130 : 1998 | Identical |
NEN EN ISO 14130 : 1997 | Identical |
NS EN ISO 14130 : 1ED 1998 | Identical |
I.S. EN ISO 14130:1998 | Identical |
PN EN ISO 14130 : 2001 | Identical |
SN EN ISO 14130 : 1998 | Identical |
UNI EN ISO 14130 : 1999 | Identical |
SS-EN ISO 14130:1998 | Identical |
BS EN ISO 14130:1998 | Identical |
EN ISO 14130 : 1997 | Identical |
DIN EN ISO 14130:1998-02 | Identical |
DIN EN 16582-2:2015-11 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
13/30279623 DC : 0 | BS EN 16582-2 - DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENT INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
BS ISO 2797:2017 | Textile glass. Rovings. Basis for a specification |
BS ISO 1268-4 : 2005 | FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 4: MOULDING OF PREPREGS |
BS ISO 11119-4:2016 | Gas cylinders. Refillable composite gas cylinders. Design, construction and testing Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
I.S. EN 16582-2:2015 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
BS EN 13706-3:2002 | Reinforced plastics composites. Specifications for pultruded profiles Specific requirements |
EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
ONORM EN 12245 : 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
I.S. EN ISO 14692-2:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 2: QUALIFICATION AND MANUFACTURE (ISO 14692-2:2017) |
13/30274822 DC : 0 | BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS |
ISO 11119-4:2016 | Gas cylinders Refillable composite gas cylinders Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
15/30253325 DC : 0 | BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION |
ISO 2797:2017 | Textile glass — Rovings — Basis for a specification |
DIN EN ISO 10350-2:2011-06 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
DIN EN ISO 11439:2013-09 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
I.S. EN ISO 11439:2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
NF EN 12245 : 2009 + A1 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
NBR 15708-5 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
BS ISO 13781:2017 | Implants for surgery. Homopolymers, copolymers and blends on poly(lactide). In vitro degradation testing |
ISO 13781:2017 | Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing |
ISO 15814:1999 | Implants for surgery Copolymers and blends based on polylactide In vitro degradation testing |
ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
ISO 8605:2001 | Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
ISO 14692-2:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture |
DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
BS EN 13706-2:2002 | Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements |
BS EN ISO 10350-2:2011 | Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics |
EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
UNI EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
ONORM EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
I.S. EN ISO 10350-2:2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
UNI EN 12245 : 2011 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
DIN EN 16582-2 E : 2015 | DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS |
07/30165210 DC : 0 | BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
BS ISO 8605:2001 | Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
BS EN 16582-2:2015 | Domestic swimming pools Specific requirements including safety and test methods for inground pools |
15/30296854 DC : 0 | BS ISO 13781 - INPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING |
12/30259634 DC : 0 | BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
EN ISO 14692-2:2017 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017) |
UNE-EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
UNE-EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
BS EN ISO 11439:2013 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
EN 13706-3:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements |
EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
EN 13706-2:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
ISO 1268-4:2005 | Fibre-reinforced plastics Methods of producing test plates Part 4: Moulding of prepregs |
UNE-ISO 1268-4:2012 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs |
ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
EN ISO 12215-1:2000 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
UNE-EN 16582-2:2015 | Domestic swimming pools - Part 2: Specific requirements including safety and test methods for inground pools |
IEC TS 62600-2:2016 | Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems |
ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
UNI EN ISO 11439 : 2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES |
ASME RTP 1 : 2015 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
ASME RTP-1 : 2017 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
ISO 1268:1974 | Plastics Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes |
EN ISO 2818:1996 | PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING |
ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
ISO 5893:2002 | Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification |
ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.