ISO 14341 : 2010(R2014)

Add To Cart

Product Format

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Classification
4 Symbols and requirements
5 Mechanical tests
6 Chemical analysis
7 Rounding procedure
8 Retests
9 Technical delivery conditions
10 Examples of designation

Abstract - (Show below) - (Hide below)

This International Standard specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 44
Supersedes	ISO/DIS 14341 : 60.00 (2010) ISO 14341 : 2002

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN ISO 14341 : 2011	Identical
NS EN ISO 14341 : 2011	Identical
EN ISO 14341 : 2011	Identical
PN EN ISO 14341 : 2011	Identical
NF EN ISO 14341 : 2011	Identical
DS EN ISO 14341 : 2011	Identical
BS EN ISO 14341 : 2011	Identical
UNI EN ISO 14341 : 2011	Identical
SS-EN ISO 14341:2011	Identical
UNE EN ISO 14341 : 2011	Identical
DIN EN ISO 14341 E : 2011	Identical
DIN EN ISO 14341 : 2011	Identical
NEN EN ISO 14341 : 2011	Identical
CSA ISO 14341 : 2011	Identical
SN EN ISO 14341 : 2011	Identical
NEN EN ISO 14341 : 2011	Identical
PN EN ISO 14341 : 2011	Identical
CSA ISO 14341 : 2011	Identical
NBN EN ISO 14341 : 2011	Identical
BS EN ISO 14341 : 2011	Identical
UNI EN ISO 14341 : 2011	Identical
SN EN ISO 14341 : 2011	Identical
CSA ISO 14341 : 2011 : R2016	Identical
I.S. EN ISO 14341:2011	Identical
NS EN ISO 14341 : 2011	Identical
UNE EN ISO 14341 : 2011	Identical
CSA ISO 14341 : 2011 : R2016	Identical
NF EN ISO 14341 : 2011	Identical
SANS 14341 : 1ED 2009(R2015)	Identical
DIN EN ISO 14341 : 2011-04	Identical
DIN EN ISO 14341 E : 2011	Identical
DS EN ISO 14341 : 2011	Identical
SS-EN ISO 14341:2011	Identical
CSA ISO 14341 : 2011	Identical
CSA ISO 14341 : 2011	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

14/30312130 DC : 0	BS EN 13479 - WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS
UNI EN 15594 : 2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
DNV-OS C401 : LATEST	FABRICATION AND TESTING OF OFFSHORE STRUCTURES
BS EN 4632-003 : 2010	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
UNE EN ISO 2553 : 2014	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
16/30328759 DC : 0	BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN ISO 2553:2013	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
BS EN ISO 2553 : 2013	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
UNI EN 4632-003 : 2011	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
PREN 1011-8 : DRAFT 2016	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS
UNE EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
14/30287678 DC : 0	BS EN ISO 1071 - WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION
DIN EN 15594 E : 2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
DIN EN 15594 : 2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
DIN EN 1090-2 E : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
15/30320416 DC : 0	BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
16/30336476 DC : 0	BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
PREN 13479 : DRAFT 2014	WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS
BS EN ISO 9606-1 : 2017	QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS
16/30342040 DC : 0	BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION
17/30353044 DC : 0	BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
PREN 1090-2 : DRAFT 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
16/30336473 DC : 0	BS EN 1011-8 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS
BS EN 15594 : 2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
I.S. EN 287-6:2010	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
DNV/GL-OS-C401 : LATEST	FABRICATION AND TESTING OF OFFSHORE STRUCTURES
UNE EN 15594 : 2010	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
UNI EN 287-6 : 2010	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
I.S. EN 1090-2:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN ISO 9606-1:2017	QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013)
I.S. EN ISO 15012-4:2016	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016)
I.S. EN 15594:2009	RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING
PREN 287-6 : DRAFT 2016	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
I.S. EN 1011-8:2004	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS
ISO TR 17671-6 : 2005(R2013)	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING
DIN EN ISO 2553 E : 2014	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
NF EN 1090-2 : 2009 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN ISO 2553 : 2014	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
UNE EN ISO 9606-1 : 2017	QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013)
DIN EN ISO 2553 : 2014	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
DIN EN 287-6 E : 2010	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
I.S. EN 4632-003:2010	AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
ISO 2553 : 2013	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
EN 1011-8 : 2018	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS
BS EN ISO 15012-4 : 2016	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016)
EN 1090-2 : 2008 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
11/30050625 DC : 0	BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED, BRAZED AND SOLDERED JOINTS
EN ISO 2553 : 2013	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
EN 287-6 : 2018	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRONS
DIN EN 287-6 : 2016	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
BS EN 1090-2 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2 : 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
ISO 15012-1 : 2013(R2018)	HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY

Standards Referencing This Book - (Show below) - (Hide below)

ISO 544 : 2011	WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS
ISO 14344 : 2010(R2014)	WELDING CONSUMABLES - PROCUREMENT OF FILLER MATERIALS AND FLUXES
ISO 15792-1 : 2000(R2014)	WELDING CONSUMABLES - TEST METHODS - PART 1: TEST METHODS FOR ALL-WELD METAL TEST SPECIMENS IN STEEL, NICKEL AND NICKEL ALLOYS
ISO 80000-1 : 2009	QUANTITIES AND UNITS - PART 1: GENERAL
ISO 14175 : 2008(R2017)	WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES
ISO 13916 : 2017	WELDING - MEASUREMENT OF PREHEATING TEMPERATURE, INTERPASS TEMPERATURE AND PREHEAT MAINTENANCE TEMPERATURE

Publisher

Category