ISO 1514 : 2016

PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING

International Organization for Standardization

Preview

Current

Add To Cart

Product Format

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Steel panels
4 Tinplate panels
5 Zinc- and zinc-alloy-coated panels
6 Aluminium panels
7 Coil-coating panels of steel or aluminium
8 Plastics panels
9 Glass-fibre reinforced plastic composite panels (GRP)
10 Carbon-fibre reinforced plastic composite panels (CFRP)
11 Glass panels
12 Hardboard
13 Gypsum plasterboards panels and gypsum boards with
fibrous reinforcement panels
14 Fibre-reinforced cement panels
Annex A (informative) - General guidelines on preparation of
steel panels by blast-cleaning
Annex B (informative) - Common substrate panels
Bibliography

Abstract - (Show below) - (Hide below)

This International Standard specifies several types of standard panels and describes procedures for their preparation prior to painting.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 35
Supersedes	ISO/DIS 1514 : 60.00 (2016)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS 3900-A3(2004) : 2004	Identical
BS 3900-A3(1997) : 1997	Identical
DIN 53227 : 1978	Similar to
UNI EN ISO 1514 : 2016	Identical
I.S. EN 605:1993	Identical
DIN EN 605 : 1992	Corresponds
SS-EN ISO 1514 : 2016	Identical
SANS 175 : 2ED 2006(R2012)	Identical
UNE 4198029 : 1980	Identical
PN EN ISO 1514 : 2016	Identical
DS EN ISO 1514 : 2016	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

EN ISO 2812-1 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017)
PREN 1871 : DRAFT 2012	ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
BS 3900-C3(1990) : AMD 7501	METHODS OF TEST FOR PAINTS - THROUGH DRY TEST
DIN EN ISO 9117-1 E : 2009	PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME
BS 3900-A17(1986) : 1986	METHODS OF TEST FOR PAINTS - PART A17: COATING OF TEST PANELS AT A SPECIFIED SPREADING RATE
BS 3900-C2(1994) : 1994 AMD 8609	METHODS OF TEST FOR PAINTS - SURFACE-DRYING TEST (BALLOTINI METHOD)
BS 3900-F15(1995) : 1995	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO HUMIDITY (INTERMITTENT CONDENSATION)
10/30206990 DC : 0	BS EN ISO 6272-1 - PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER
AFAP-5 : 2010	NATO REACTION-TO-FIRE TESTS FOR MATERIALS - HEAT RELEASE RATE
I.S. EN ISO 20567-3:2012	PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
DIN ISO 1520 : 1982	PAINTS AND VARNISHES - CUPPING TEST
14/30289467 DC : 0	BS EN ISO 3248 - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT
01/121972 DC : DRAFT MAY 2001	BS 3900-E12.3 - PAINTS AND VARNISHES - DETERMINATION OF MICRO-INDENTATION HARDNESS - PART 3: DETERMINATION OF UNIVERSAL HARDNESS AND RELATED PROPERTIES USING A VICKERS INDENTOR
12/30249839 DC : 0	BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
BS 3900-B17(1991) : 1991	METHODS OF TEST FOR PAINTS - PREPARATION OF ACID EXTRACTS FROM DRIED PAINT FILMS
BS EN ISO 12137 : 2011	PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE (ISO 12137:2011)
BS 3900-E2(1992) : 1992 AMD 12091	METHODS OF TEST FOR PAINTS - SCRATCH TEST
BS EN ISO 11997-1 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017)
16/30335981 DC : 0	BS ISO 6270-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 3: CONDENSATION (IN-CABINET EXPOSURE WITH HEATED, BUBBLING WATER RESERVOIR)
BS EN ISO 9117-4 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER (ISO 9117-4:2012)
BS 3900-F19(2000) : 2000 AMD 16874	METHODS OF TEST FOR PAINT - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
ISO 12013-1 : 2012(R2018)	PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE DAMPED OSCILLATION METHOD - PART 1: START TEMPERATURE OF THE CURING REACTION
BS EN ISO 2812-5 : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
BS 3900-F8(1993) : 1993 AMD 9930	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
ISO 11659-3 : 2004	TEXTILE MACHINERY AND ACCESSORIES - MACHINE PARTS IN CONTACT WITH TEXTILE PROCESSING OILS - PART 3: DETERMINATION OF THE IMPACT ON LACQUERS
BS EN ISO 2812-1 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER
BS EN ISO 9117-3 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI
BS 3900-E6(2007) : 2007	PAINTS AND VARNISHES - CROSS-CUT TEST
BS 3900-G5(1993) : 1993 AMD 8355	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO LIQUIDS - GENERAL METHODS
BS 3900-J12(1998) : 1998	METHODS OF TEST FOR PAINTS - TESTING OF COATING POWDERS - DETERMINATION OF COMPATIBILITY OF COATING POWDERS
UNE EN ISO 9117-6 : 2013	PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012)
DIN EN ISO 20567-3 : 2013	PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
16/30323865 DC : DRAFT APR 2016	BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
14/30309764 DC : 0	BS EN ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING
BS 3900-F13(1986) : AMD 8610	METHODS OF TEST FOR PAINTS - DURABILITY TESTS ON PAINT FILMS - FILIFORM CORROSION TEST ON STEEL
DIN EN ISO 9117-2 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY
BS 3900-F18(1998) : 1998	METHODS OF TEST FOR PAINTS - PART F18: DETERMINATION OF RESISTANCE TO CORROSION UNDER A WET (SALT FOG)/DRY/HUMIDITY CYCLE
06/30148614 DC : 0	EN ISO 17132 - PAINTS AND VARNISHES - T-BEND TEST
BS 3900-F12(1997) : 1997 AMD 13288	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
DIN EN ISO 16474-1 E : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
BS 3900-F14(2004) : 2004	PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION
NF EN ISO 9117-2 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY
UNE EN ISO 16927 : 2014	PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
DIN EN ISO 15184 E : 2013	PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012)
08/30189484 DC : DRAFT OCT 2008	BS EN ISO 9117-2 - PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY
UNI EN ISO 9117-1 : 2009	PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME
BS 3900-F18(2005) : 2005	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY
17/30350881 DC : DRAFT SEP 2017	BS ISO 14993 - CORROSION OF METALS AND ALLOYS - ACCELERATED TESTING INVOLVING CYCLIC EXPOSURE TO SALT MIST, DRY AND WET CONDITIONS
10/30197383 DC : 0	BS ISO 12013-1 - PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE-DAMPED OSCILLATION METHOD - PART 1: START TEMPERATURE OF REACTION
UNI EN ISO 9117-3 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI
UNI EN ISO 16474-3 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
AEP-64 : 2012	PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT
09/30196695 DC : 0	BS ISO 1519 - PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL)
BS 3900-E1(1995) : 1995	METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL)
11/30215685 DC : 0	BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
BS 3900-D1(1998) : 1998 AMD 13287	METHODS OF TEST FOR PAINTS - VISUAL COMPARISON OF THE COLOUR OF PAINTS
12/30243830 DC : 0	BS EN ISO 16474-1 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
UNI EN ISO 1518-1 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD
11/30217714 DC : 0	BS EN ISO 15184 - PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST
12/30254917 DC : DRAFT JAN 2012	BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
14/30266805 DC : 0	BS EN ISO 4624 - PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION
10/30210869 DC : 0	BS EN ISO 9117-4 - PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER
11/30229694 DC : 0	BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
BS 3900-E10(2003) : 2003	PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION
14/30266791 DC : 0	BS EN ISO 7784-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: METHOD WITH ABRASIVE RUBBER WHEELS AND ROTATING TEST PANEL
ONORM EN ISO 2812-3 : 2012	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
DIN EN ISO 15184 : 2013	PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012)
AFAP-2 : 2010	NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SMOKE GENERATION
96/120232 DC : DRAFT FEB 1996	BS 3900-E20: METHODS OF TEST FOR PAINTS - DETERMINATION OF PENCIL HARDNESS
DIN EN ISO 16927 E : 2014	PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
BS EN ISO 8130-12 : 2010	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
BS 3900-E12.1(2000) : 2000	METHODS OF TEST FOR PAINTS - DETERMINATION OF KNOOP HARDNESS BY MEASUREMENT OF THE INDENTATION LENGTH USING A MICROSCOPE
BS 3900-F19(2006) : 2006	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
08/30189495 DC : DRAFT OCT 2008	BS EN ISO 9117-3 - PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI
10/30197386 DC : 0	BS ISO 12013-2 - PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE-DAMPED OSCILLATION METHOD - PART 2: GLASS-TRANSITION TEMPERATURE
DIN EN ISO 9117-2 E : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY
ISO 2812-2 : 2007(R2010)	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
BS 3900-D1(1978) : 1978	METHODS OF TEST FOR PAINTS - OPTICAL TESTS ON PAINT FILMS - VISUAL COMPARISON OF THE COLOUR OF PAINTS
12/30229691 DC : 0	BS EN ISO 2813 - PAINTS AND VARNISHES - DETERMINATION OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20 DEGREES, 60 DEGREES AND 85 DEGREES
BS EN ISO 20567-3 : 2012	PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY
17/30327456 DC : DRAFT SEP 2017	BS ISO 20266 - PAINTS AND VARNISHES - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE)
BS EN ISO 16927 : 2014	PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
10/30229700 DC : 0	BS EN ISO 9117-6 - PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST
11/30217720 DC : 0	BS EN ISO 20567-3 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY
BS EN ISO 8130-8 : 2010	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
ONORM EN ISO 1518-2 : 2012	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
DIN 53150 : 2002	PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD)
BS 3900-E12(1986) : 1986	METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - INDENTATION TEST (SPHERICAL OR PYRAMIDAL)
BS 3900-E12.2(2000) : 2000	METHODS OF TEST FOR PAINTS - DETERMINATION OF KNOOP HARDNESS BY MEASUREMENT OF THE INDENTATION DEPTH
BS EN ISO 15110 : 2017	PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
01/122232 DC : DRAFT JUNE 2001	BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES
DIN EN ISO 16474-3 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
BS 3900-E6(1992) : 1992 AMD 8353	METHODS OF TEST FOR PAINTS - CROSS CUT TEST
NF EN ISO 9117-3 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI
14/30289470 DC : 0	BS ISO 3668 - PAINTS AND VARNISHES - VISUAL COMPARISON OF THE COLOUR OF PAINTS
17/30361500 DC : 0	BS EN ISO 4623-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
UNI EN ISO 9117-4 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER
10/30207417 DC : 0	BS EN ISO 2409 - PAINTS AND VARNISHES - CROSS-CUT TEST
DIN ISO 8130-8 : 2005	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
EN IEC 62631-3-11 : 2018	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-11: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - METHOD FOR IMPREGNATION AND COATING MATERIALS (IEC 62631-3-11:2018)
DIN EN ISO 9117-3 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI
NF EN ISO 8130-8 : 2011	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
DIN ISO 8130-12 E : 2005	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
14/30309761 DC : 0	BS EN ISO 11997-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY
14/30309767 DC : 0	BS EN ISO 20567-2 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY
BS ISO 27667 : 2011	ROAD VEHICLES - BRAKE LINING FRICTION MATERIALS - EVALUATION OF CORROSION EFFECTS ON PAINTED BACKING PLATES AND BRAKE SHOES
DIN EN ISO 9227 E : 2017	CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017)
BS EN ISO 1518-2 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
BS 3900-F16(1997) : 1997 AMD 13289	METHODS OF TEST FOR PAINTS - RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER)
ISO 4623-1 : 2000	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
DIN EN ISO 2812-2 : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
DIN EN ISO 1518-2 : 2012	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
BS EN ISO 9117-6 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012)
DIN EN ISO 9117-1 : 2009	PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME
14/30309758 DC : 0	BS EN ISO 4623-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES
14/30298283 DC : 0	BS ISO 18314-1 - ANALYTICAL COLORIMETRY - PART 1: PRACTICAL COLOUR MEASUREMENT
DIN ISO 8130-8 E : 2005	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
DIN EN ISO 9117-5 E : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012)
VDI/VDE 2616-2 : 2014	HARDNESS TESTING OF PLASTICS AND ELASTOMERS
DIN EN ISO 9117-6 E : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012)
BS 3900-C7(1982) : 1982	METHODS OF TEST FOR PAINTS - TESTS ASSOCIATED WITH PAINT FILM FORMATION - PRESSURE TEST FOR STACKABILITY
DIN EN ISO 12137 : 2012	PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE (ISO 12137:2011)
DIN EN ISO 9117-3 E : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI
15/30268151 DC : 0	BS EN ISO 14577-4 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS
04/30012206 DC : DRAFT AUG 2004	PREN 4592 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF INFRARED REFLECTANCE
BS 3900-E11(1985) : 1985 AMD 8612	METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - BEND TEST (CONICAL MANDREL)
10/30206970 DC : 0	BS EN ISO 6272-2 - PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER
UNE EN ISO 9117-4 : 2013	PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER (ISO 9117-4:2012)
97/700599 DC : DRAFT JAN 1997	PREN 4160 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE
17/30361497 DC : 0	BS EN ISO 2812-5 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
BS 3900-F14(1995) : 1995 AMD 9931	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING BY EXPOSURE TO FILTERED XENON-ARC RADIATION
BS EN ISO 15184 : 2012	PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012)
BS ISO 18314-1 : 2015	ANALYTICAL COLORIMETRY - PART 1: PRACTICAL COLOUR MEASUREMENT
ONORM EN ISO 1518-1 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD
BS 3900-E1(2002) : 2002	PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL)
UNI EN ISO 8130-8 : 2011	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
10/30210872 DC : 0	BS EN ISO 9117-5 - PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST
BS EN ISO 17132 : 2007	PAINTS AND VARNISHES - T-BEND TEST
BS 3900-E15(1997) : 1997	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL)
DIN ISO 8130-12 : 2005	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
BS ISO 6272-2 : 2002 AMD 16866	PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER
BS 3900-F20(2004) : 2004	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES
BS 3900-E13(1993) : 1993 AMD 8354	METHODS OF TEST FOR PAINTS - FALLING WEIGHT RESISTANCE (IMPACT)
BS EN ISO 16474-3 : 2013	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
DIN EN ISO 9117-5 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012)
BS ISO 12013-1 : 2012	PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE DAMPED OSCILLATION METHOD - PART 1: START TEMPERATURE OF THE CURING REACTION
BS 3900-F16(2007) : 2007	PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER
ISO 16151 : 2005	CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TEST WITH EXPOSURE TO ACIDIFIED SALT SPRAY, DRY AND WET CONDITIONS
ISO/DIS 8130-12 : 40.20 (2018)	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
BS 3900-F9(1982) : AMD 8611	METHODS OF TEST FOR PAINTS - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO HUMIDITY (CONTINUOUS CONDENSATION)
BS 3900-G8(1993) : 1993 AMD 8356	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO LIQUIDS. WATER IMMERSION METHOD
DIN EN ISO 17132 E : 2008	PAINTS AND VARNISHES - T-BEND TEST
BS 3900-F9(2001) : 2001	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 1: CONTINUOUS CONDENSATION
DIN EN ISO 2812-5 E : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
BS 3900-E14(2006) : 2006	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: ROTATING ABRASIVE-PAPER-COVERED WHEEL METHOD
BS ISO 20567-1 : 2005 AMD 16853	PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING
BS 3900-E14(1997) : 1997 AMD 16870	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL)
BS ISO 12013-2 : 2012	PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE DAMPED OSCILLATION METHOD - PART 2: GLASS TRANSITION TEMPERATURE
BS ISO 15710 : 2002 AMD 16861	PAINTS AND VARNISHES - CORROSION TESTING BY ALTERNATE IMMERSION IN AND REMOVAL FROM A BUFFERED SODIUM CHLORIDE SOLUTION
DIN EN ISO 9117-4 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER (ISO 9117-4:2012)
BS 3900-E4(1995) : 1995	METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - PAINTS AND VARNISHES - CUPPING TEST
DIN EN ISO 12137 E : 2012	PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE (ISO 12137:2011)
18/30371134 DC : DRAFT APR 2018	BS EN ISO 8130-12 - COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
DIN EN ISO 17132 : 2008	PAINTS AND VARNISHES - T-BEND TEST
95/101288 DC : DRAFT FEB 1995	PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
BS 3900-E9(2003) : 2003	PAINTS AND VARNISHES - BUCHHOLZ INDENTATION TEST
12/30229888 DC : 0	BS EN ISO 16474-3 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS
BS 3900-A16(1986) : 1986	METHODS OF TEST FOR PAINTS - PART A16: DETERMINATION OF NATURAL SPREADING RATE BY BRUSH APPLICATION
BS 3900-F12(1985) : 1985	METHODS OF TEST FOR PAINTS - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY
07/30174613 DC : 0	BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES
BS 3900-C5(1992) : 1992	METHODS OF TEST FOR PAINTS - DETERMINATION OF FILM THICKNESS
BS 3900-J4(1995) : 1995	METHODS OF TEST FOR PAINTS - DETERMINATION OF THE STORAGE STABILITY OF COATING POWDERS
14/30266788 DC : 0	BS EN ISO 7784-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST PANEL
DIN EN ISO 8130-8 E : 2011	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
BS 3900-E18(1997) : 1997 AMD 16862	METHODS OF TEST FOR PAINTS - DETERMINATION OF MAR RESISTANCE USING A POINTED STYLUS
BS 3900-E11(2006) : 2006	PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL)
I.S. EN ISO 15184:2012	PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012)
DIN EN ISO 20567-3 E : 2013	PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
11/30233262 DC : 0	BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
BS 3900-E13(2004) : 2004	PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER
BS 3900-E19(1999) : 1999	METHODS OF TEST FOR PAINTS - DETERMINATION OF FILM HARDNESS BY PENCIL TEST
BS 3900-C8(1978) : 1978 AMD 8613	METHODS OF TEST FOR PAINTS - TESTS ASSOCIATED WITH PAINT FILM FORMATION - PRINT-FREE TEST
14/30298904 DC : 0	BS EN ISO 7784-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 3: METHOD WITH ABRASIVE-PAPER COVERED WHEEL AND LINEARLY RECIPROCATING TEST PANEL
BS 3900-E10(1979) : 1979	METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - PULL-OFF TEST FOR ADHESION
BS EN ISO 9117-2 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY
NF EN ISO 1518-1 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD
BS EN ISO 9117-5 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST
17/30344544 DC : 0	BS EN ISO 2812-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
BS EN ISO 4623-1 : 2002	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
BS EN IEC 62631-3-11 : 2018	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-11: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - METHOD FOR IMPREGNATION AND COATING MATERIALS
16/30337293 DC : 0	BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES
NF EN ISO 1518-2 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD
IEC 62631-3-11 : 1ED 2018	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-11: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - METHOD FOR IMPREGNATION AND COATING MATERIALS
BS 3900-E4(2001) : 2001	PAINTS AND VARNISHES - CUPPING TEST
02/123757 DC : DRAFT OCT 2002	ISO 20567-2 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 2: SINGLE IMPACT TEST
BS ISO 11997-1 : 2005 AMD 16875	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY
BS ISO 20567-2 : 2005 AMD 16852	PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY
I.S. EN ISO 9117-4:2012	PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER (ISO 9117-4:2012)
BS 3900-E16(2000) : 2000 AMD 16868	METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (RECIPROCATING TEST PANEL METHOD)
BS 3900-E5(1998) : 1998 AMD 12090	METHODS OF TEST FOR PAINTS - PENDULUM DAMPING TESTING
BS 3900-E15(2006) : 2006	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: ROTATING ABRASIVE RUBBER WHEEL METHOD
BS ISO 16862 : 2003 AMD 16867	PAINTS AND VARNISHES - EVALUATION OF SAG RESISTANCE
DIN EN ISO 2812-3 E : 2012	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
UNE EN ISO 15184 : 2013	PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012)
BS 3900-G7(1998) : 1998 AMD 12096	METHODS OF TEST FOR PAINTS - DETERMINATION OF THE EFFECT OF HEAT
BS 5629-2(1979) : 1979	INSULATING VARNISHES CONTAINING SOLVENT - TEST METHODS
02/122653 DC : DRAFT JUN 2002	BS EN ISO 6860 - PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL)
02/123756 DC : DRAFT OCT 2002	ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 1: MULTI IMPACT TEST
VDI 3958-13 : 2014(R2019)	ENVIRONMENTAL SIMULATION - TROPICALISATION OF PAINT COATINGS FOR OUTDOOR USE - TEST METHODS
ONORM EN ISO 2812-5 : 2008	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
BS EN ISO 2812-4 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS
DIN EN ISO 1518-1 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD
ISO 11997-2 : 2013(R2018)	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
UNI EN ISO 9117-2 : 2010	PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY
DIN EN ISO 16474-3 E : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
BS EN 60464-2 : 2001	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
DIN EN ISO 9117-4 E : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER (ISO 9117-4:2012)
I.S. EN ISO 9117-5:2012	PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012)
STANAG 2836 : 0	REMOVABLE PAINTS FOR CAMOUFLAGE
DIN EN ISO 1518-2 E : 2012	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
AEP-61 : 2009	PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS
UNE EN ISO 12137 : 2012	PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE (ISO 12137:2011)
ISO 11997-1 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY
AEP-65 : 2012	PERFORMANCE REQUIREMENTS AND TEST METHOD FOR PAINT SYSTEMS RESISTANT TO CHEMICAL WARFARE AGENTS
UNE EN ISO 1518-1 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD (ISO 1518-1:2011)
UNE EN ISO 8130-12 : 2011	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
I.S. EN ISO 2812-2:2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
I.S. EN ISO 9117-2:2010	PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY
I.S. EN ISO 1518-2:2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
I.S. EN ISO 8130-12:2010	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
I.S. EN ISO 12137:2011	PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE (ISO 12137:2011)
DIN EN ISO 8130-12 : 2011	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
I.S. EN ISO 2812-5:2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
UNE EN ISO 20567-3 : 2013	PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012)
I.S. EN ISO 11997-1:2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017)
UNI EN ISO 9117-5 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST
I.S. EN ISO 16474-3:2013	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
I.S. EN ISO 16474-1:2013	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
DIN EN ISO 1518-1 E : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD (ISO 1518-1:2011)
I.S. EN ISO 9117-6:2012	PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012)
I.S. EN ISO 2812-4:2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017)
PREN 1825-1 : DRAFT 1995	INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
ISO 11503 : 1995(R2017)	PAINTS - DETERMINATION OF RESISTANCE TO HUMIDITY (INTERMITTENT CONDENSATION)
DIN EN ISO 8130-12 E : 2011	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
I.S. EN ISO 16927:2014	PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
I.S. EN IEC 62631-3-11:2018	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-11: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - METHOD FOR IMPREGNATION AND COATING MATERIALS
AEP-60 : 2009	PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS
DIN EN ISO 2812-5 : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
I.S. EN ISO 8130-8:2010	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
DIN EN ISO 16474-1 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
ISO 20340 : 2009	PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES
ISO 12013-2 : 2012(R2018)	PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE DAMPED OSCILLATION METHOD - PART 2: GLASS TRANSITION TEMPERATURE
UNI EN ISO 15184 : 2013	PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST
AEP-63 : 2009	PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS
ISO 12944-9 : 2018	PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES
AFAP-4 : 2010	NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SURFACE SPREAD OF FLAME
UNE EN ISO 16474-1 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
EN ISO 11997-1 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017)
UNI EN ISO 16474-1 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
ONORM EN ISO 16474-1 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013)
BS EN ISO 2812-2 : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
BS EN ISO 16474-1 : 2013	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
UNE EN ISO 2812-3 : 2013	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
DIN EN ISO 2812-2 E : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHODS
EN ISO 2812-5 : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
UNI EN ISO 12137 : 2011	PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE
EN ISO 4623-1 : 2002	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
NF EN ISO 8130-12 : 2011	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
BS 3900-F13(2002) : 2002	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
UNI EN ISO 8130-12 : 2011	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
BS EN ISO 2812-3 : 2012	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
UNE EN ISO 9117-5 : 2013	PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012)
ISO 2812-5 : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD
UNE EN ISO 2812-4 : 2018	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017)
UNE EN ISO 15110 : 2018	PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
I.S. EN ISO 12944-9:2018	PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018)
UNI EN ISO 16927 : 2014	PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING
ISO 3668 : 2017	PAINTS AND VARNISHES - VISUAL COMPARISON OF COLOUR OF PAINTS
UNI EN ISO 2812-3 : 2012	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM
EN ISO 2812-3 : 2012	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
CEI EN 61086-2 : 2005	COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
UNI EN ISO 9117-6 : 2012	PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST
UNI EN ISO 1518-2 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE- LOADING METHOD
NF EN ISO 12137 : 2011	PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE
I.S. EN ISO 4623-1:2002	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
ISO 16474-1 : 2013	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
ISO 15110 : 2017	PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
EN ISO 2812-4 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017)
I.S. EN ISO 2812-1:2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017)
ISO 6270-3 : 2018	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART 3: CONDENSATION (IN-CABINET EXPOSURE WITH HEATED, BUBBLING WATER RESERVOIR)
I.S. EN ISO 17132:2007	PAINTS AND VARNISHES - T-BEND TEST
DIN EN ISO 16927 : 2014	PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014)
ISO 27667 : 2011(R2018)	ROAD VEHICLES - BRAKE LINING FRICTION MATERIALS - EVALUATION OF CORROSION EFFECTS ON PAINTED BACKING PLATES AND BRAKE SHOES
BS EN ISO 9117-1 : 2009	PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME
12/30245694 DC : 0	BS EN ISO 16927 - PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING
DIN EN ISO 8130-8 : 2011	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
12/30266874 DC : 0	BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
SAE AMS 3095 : 2004	PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM
15/30284318 DC : 0	BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
10/30229703 DC : 0	BS EN ISO 2812-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM
BS 3900-E17(1997) : 1997 AMD 16863	METHODS OF TEST FOR PAINTS - DETERMINATION OF MAR RESISTANCE USING A CURVED STYLUS
I.S. EN ISO 15110:2017	PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
I.S. EN ISO 9117-3:2010	PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI
BS EN ISO 1518-1 : 2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD
UNE EN ISO 16474-3 : 2014	PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 16474-3:2013)
UNE EN ISO 1518-2 : 2012	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011)
UNE EN ISO 8130-8 : 2011	COATING POWDERS - PART 8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS
EN ISO 2812-2 : 2007	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD
ISO 7724-2 : 1984	PAINTS AND VARNISHES - COLORIMETRY - PART 2: COLOUR MEASUREMENT
EN ISO 15110 : 2017	PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
ISO 6441-2 : 1999	PAINTS AND VARNISHES - DETERMINATION OF MICRO-INDENTATION HARDNESS - PART 2: KNOOP HARDNESS BY MEASUREMENT OF INDENTATION DEPTH UNDER LOAD
ISO 2812-4 : 2017	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS
ISO 6441-1 : 1999	PAINTS AND VARNISHES - DETERMINATION OF MICRO-INDENTATION HARDNESS - PART 1: KNOOP HARDNESS BY MEASUREMENT OF INDENTATION LENGTH
EN ISO 8130-12 : 2010	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
ISO 18314-1 : 2015	ANALYTICAL COLORIMETRY - PART 1: PRACTICAL COLOUR MEASUREMENT
DIN EN ISO 2812-3 : 2012	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
EN ISO 12944-9 : 2018	PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018)
ISO 8130-12 : 1998(R2014)	COATING POWDERS - PART 12: DETERMINATION OF COMPATIBILITY
I.S. EN ISO 9117-1:2009	PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME
I.S. EN 61086-2:2004	COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
I.S. EN ISO 1518-1:2011	PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD
I.S. EN ISO 2812-3:2012	PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012)
I.S. EN 60464-2:2002	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
ISO 4624 : 2016	PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION
I.S. ISO 6441:1988	PAINTS AND VARNISHES - INDENTATION TEST (SPHERICAL OR PYRAMIDAL)
IEC 60464-2 : 2.1	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST