• There are no items in your cart

ISO 15156-3:2015

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

12-03-2020

Language(s)

English

Published date

08-20-2015

ISO 15156-3:2015 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations.

ISO 15156-3:2015 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC).

ISO 15156-3:2015 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.

Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions.

ISO 15156-3:2015 applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 151561:2015, Clause 5.

ISO 15156-3:2015 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

DevelopmentNote
Supersedes ISO/DIS 15156-3. (08/2015)
DocumentType
Standard
Pages
85
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

API 19G1 CHINESE : 2010 SIDE-POCKET MANDRELS
DIN EN 14161:2015-07 ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN
07/30172770 DC : 0 BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT
07/30159562 DC : 0 BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
15/30328952 DC : 0 BS EN ISO 10418 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - PROCESS SAFETY SYSTEMS
API SPEC 5CRA : 2010 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
BS EN ISO 17781:2017 Petroleum, petrochemical and natural gas industries. Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
API 7-1 : 2006 : INC : ADD 3 : 2011 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
I.S. EN ISO 17781:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - TEST METHODS FOR QUALITY CONTROL OF MICROSTRUCTURE OF FERRITIC/AUSTENITIC (DUPLEX) STAINLESS STEELS (ISO 17781:2017)
BS EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements
07/30168326 DC : DRAFT DEC 2007 BS ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES
06/30159843 DC : 0 BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
API 11B : 2010 SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
CSA Z662.1 : 2013 COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS
EEMUA 194 : 2012 GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT
API 14L CHINESE : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
DIN EN ISO 15156-2:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
CEN ISO/TS 16530-2:2015 Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014)
NF EN ISO 15156-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 1: GENERAL PRINCIPLES FOR SELECTION OF CRACKING-RESISTANT MATERIALS
ONORM EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
I.S. EN ISO 10418:2003 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS
API 14L : 2007 : R2012 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API7-1 RUSSIAN-2006+ADD3-2011(R2015) SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
NF EN ISO 23936-1 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
07/30170577 DC : DRAFT AUG 2007 BS ISO 13623 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
CSA Z662 PACKAGE : 2011 CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS
UNI EN ISO 21457 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
I.S. EN ISO 21457:2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
ISO 10418:2003 Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems
API 19G1 : 2010 SIDE-POCKET MANDRELS
DIN EN ISO 17292:2016-05 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
EN ISO 15156-1:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2015)
I.S. EN ISO 15156-2:2015&LC:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
I.S. EN 14161:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
EN ISO 15156-2:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
I.S. EN ISO 13628-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
I.S. EN ISO 10432:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
I.S. EN ISO 16070:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
I.S. EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
I.S. EN ISO 15156-1:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 1: GENERAL PRINCIPLES FOR SELECTION OF CRACKING-RESISTANT MATERIALS (ISO 15156-1:2015)
DIN EN ISO 21457:2010-12 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
11/30238890 DC : 0 BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES
API 7-1 : 2006 : ADD 3:2011(R2015) SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
18/30350515 DC : 0 BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING
DIN CEN ISO/TS 16530-2;DIN SPEC 91087:2016-05 WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014)
API 5LC : 2015 CRA LINE PIPE
Z245.15-17 Steel valves
API 7-1 : 2006 : INC : ADD 3 : 2011 : R2015 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
API 5CRA : 2010 : INC : ERR 1 : 2011 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
API 17G : 2006 : R2011 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
S.R. CEN ISO/TS 16530-2:2015 WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014)
I.S. EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
CAN/CSA-Z662-15 Oil and gas pipeline systems
ISO 21457:2010 Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
UNI EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
EEMUA 182 : 2004 SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK
EN ISO 13680:2010 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010)
UNI EN ISO 17078-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
UNI EN ISO 10418 : 2005 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
07/30161097 DC : 0 EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS
API SPEC 11B CHINESE : 2010 SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
BS ISO 13628-7 : 2005 AMD 16887 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS
NACE TM 03 16 : 2016 FOUR-POINT BEND TESTING OF MATERIALS FOR OIL AND GAS APPLICATIONS
API 7-1 SPANISH : 2006 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
API 7-1:2006 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
14/30304343 DC : 0 BS EN ISO 17349 - PETROLEUM AND NATURAL GAS INDUSTRIES - GUIDELINES FOR OFFSHORE PLATFORMS HANDLING STREAMS WITH HIGH CONTENT OF CO[2] AT HIGH PRESSURES
10/30196259 DC : 0 BS EN ISO 12212 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS
DIN SPEC 91087 : 2016 WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014)
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
BS EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
09/30154810 DC : 0 BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT
API 17G : 2006 : R2016 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
08/30141132 DC : DRAFT APR 2008 BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
API 5CRA CHINESE : 2011 SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
07/30173429 DC : 0 BS EN ISO 13628-1 AMD2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
API 7-1 : 2006/ADD 4 : 2019 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
UNE-EN ISO 17292:2016 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
BS EN ISO 13680:2010 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
BS EN ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
BS EN ISO 15156-1:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production General principles for selection of cracking-resistant materials
BS EN ISO 15156-2:2015 Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons
BS EN ISO 13628-7:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems
ISO 13628-7:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
BS EN ISO 10418:2003 Petroleum and natural gas industries. Offshore production Installations. Analysis, design, installation and testing of basic surface process safety systems
ISO 16070:2005 Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
BS EN ISO 10424-1:2004 Petroleum and natural gas industries. Rotary drilling equipment Rotary drill stem elements
BS EN ISO 16070:2005 Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
BS EN ISO 17078-1 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
ISO 13628-15:2011 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
BS EN 14161 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
ISO 17078-1:2004 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
EN ISO 10418:2003/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10424-1:2004 Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004)
EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)
EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
EN ISO 16070:2005 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005)
EN ISO 17781:2017 Petroleum, petrochemical and natural gas industries - Test methods for quality control of microstructure of ferritic/austenitic (duplex) stainless steels (ISO 17781:2017)
EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
EN 14161:2011+A1:2015 Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)
API RP 15CLT : 2007 RECOMMENDED PRACTICE FOR COMPOSITE LINED STEEL TUBULAR GOODS
API SPEC 14L : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
08/30146353 DC : DRAFT MAR 2008 BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
07/30140820 DC : 0 BS ISO 25457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
08/30180264 DC : DRAFT JUNE 2008 BS EN 13942 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
09/30167487 DC : 2009 BS ISO 21457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
10/30187796 DC : DRAFT DEC 2010 BS EN 14161 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
API 7-1 CHINESE : 2006 SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS
99/714370 DC : DRAFT SEP 1999 ISO 15156-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIAL FOR USE IN H2S - CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 1: GENERAL PRINCIPLES
07/30150187 DC : DRAFT AUG 2007 BS ISO 17078-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING, PULLING, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
07/30150249 DC : 0 BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
PD CEN ISO/TS 16530-2:2015 Well integrity Well integrity for the operational phase
API 17G:2006 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
API 15CLT : 2007 : R2013 RECOMMENDED PRACTICE FOR COMPOSITE LINED STEEL TUBULAR GOODS
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
NORSOK M 630 : REV 6 MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING
EN ISO 17078-1:2004/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
DIN EN ISO 15156-1:2015-12 PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 1: GENERAL PRINCIPLES FOR SELECTION OF CRACKING-RESISTANT MATERIALS (ISO 15156-1:2015)
ISO 10424-1:2004 Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
I.S. EN ISO 17078-1:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
ISO 15510:2014 Stainless steels Chemical composition
ASTM E 562 : 2011 : REDLINE Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ASTM A 744/A744M : 2013 : REDLINE Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
SAE AMS 2430 : 2015 SHOT PEENING
NACE TM 01 98 : 2016 SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 7539-7:2005 Corrosion of metals and alloys Stress corrosion testing Part 7: Method for slow strain rate testing
AS ISO 27914:2019 Carbon dioxide capture, transportation and geological storage - Geological storage
ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
NACE MR 01 76 : 2012 METALLIC MATERIALS FOR SUCKER-ROD PUMPS FOR CORROSIVE OILFIELD ENVIRONMENTS
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.