ISO 15590-3 : 2004(R2016)

Add To Cart

Product Format

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Designation of flanges
6 Pressure class and design
7 Information to be supplied by the purchaser
   7.1 Principal information
   7.2 Supplementary information
8 Manufacturing
   8.1 Manufacturing procedure specification
   8.2 Starting material
   8.3 Hubs
   8.4 Heat treatment
9 Testing and inspection
   9.1 General requirements
   9.2 Extent of testing and inspection
   9.3 Chemical composition
   9.4 Physical testing
   9.5 NDT
   9.6 Dimensions
   9.7 Hydrostatic testing
   9.8 Weldability
   9.9 Repair welding
10 Documentation
   10.1 Inspection document
   10.2 Manufacturing record book
11 Marking
Bibliography

Abstract - (Show below) - (Hide below)

ISO 15590-3:2004 applies to weldneck and blind flanges (full face, raised face, and RTJ groove) as well as anchor, swivel-ring flanges and orifice flanges.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 67
Supersedes	ISO/DIS 15590-3 : 60.00 (2004)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN ISO 15590-3 : 2004	Identical
NEN ISO 15590-3 : 2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 14161 : 2015	ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN
PREN 1594 : DRAFT 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
14/30286899 DC : 0	PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
09/30172965 DC : 0	BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
UNI EN ISO 13628-15 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
13/30271116 DC : 0	BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
16/30342676 DC : 0	BS ISO 13623 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
10/30187796 DC : DRAFT DEC 2010	BS EN 14161 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
BS EN ISO 13628-15 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
DIN EN 14161 E : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
07/30170577 DC : DRAFT AUG 2007	BS ISO 13623 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
API 17P : 2013	DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
07/30173429 DC : 0	BS EN ISO 13628-1 AMD2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
NBR 15280-1 : 2017	ONSHORE PIPELINE - PART 1: DESIGN
BS PD8010-1(2015) : 2015	PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE
BS PD8010-2(2015) : 2015	PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
I.S. EN ISO 13628-15:2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
ISO 13628-15 : 2011(R2016)	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 6507-1 : 2005	METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD
ISO 3183-3 : 1999	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINES - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
ASME B16.36 : 2015	ORIFICE FLANGES
ISO 15590-1 : 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
ISO 9712 : 2012	NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL
ASTM E 415 : 2017 : REDLINE	Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ISO 14313 : 2007R(2018)	PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
ISO 4885 : 2017	FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY
ISO 6892 : 1998	METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE
ISO 783 : 1999	METALLIC MATERIALS - TENSILE TESTING AT ELEVATED TEMPERATURE
ISO 3183-2 : 1996	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINES - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENTS CLASS B
ISO 11496 : 1993	SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE PURPOSES - ULTRASONIC TESTING OF TUBE ENDS FOR THE DETECTION OF LAMINAR IMPERFECTIONS
ISO 148-1 : 2016	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
ISO TR 7705 : 1991	BASIC RULES FOR SPECIFYING IMPACT STRENGTH IN STEEL SPECIFICATIONS
ISO 15156-2 : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS
ISO 13664 : 1997	SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE PURPOSES - MAGNETIC PARTICLE INSPECTION OF THE TUBE ENDS FOR THE DETECTION OF LAMINAR IMPERFECTIONS
ASTM E 112 : 2014-02	TEST METHODS FOR DETERMINING AVERAGE GRAIN SIZE
ASME PV CODE 8 DIV 1 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ISO 15590-2:2003(R2016)	PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS
ISO 2566-1 : 1984(R2016)	STEEL - CONVERSION OF ELONGATION VALUES - PART 1: CARBON AND LOW ALLOY STEELS
ISO 10474 : 2013(R2018)	STEEL AND STEEL PRODUCTS - INSPECTION DOCUMENTS
ASME B16.47 : 2017	LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
ASME B31.3:2016	PROCESS PIPING
MSS SP 44 : 2016	STEEL PIPELINE FLANGES
ISO 13665 : 1997	SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE PURPOSES - MAGNETIC PARTICLE INSPECTION OF THE TUBE BODY FOR THE DETECTION OF SURFACE IMPERFECTIONS
ASME B16.5 : 2017	PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ISO 3183-1 : 1996	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINES - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
ASTM A 370 : 2017-01	TEST METHODS AND DEFINITIONS FOR MECHANICAL TESTING OF STEEL PRODUCTS
ISO 7005-1 : 2011(R2017)	PIPE FLANGES - PART 1: STEEL FLANGES FOR INDUSTRIAL AND GENERAL SERVICE PIPING SYSTEMS
ISO 9327-1 : 1999(R2013)	STEEL FORGINGS AND ROLLED OR FORGED BARS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - GENERAL REQUIREMENTS
ISO 377 : 2017	STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING
ISO 13623 : 2017	PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
ISO 12095 : 1994	SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE PURPOSES - LIQUID PENETRANT TESTING

Publisher

Category