ISO 15614-13 : 2012(R2017)

Current

Current The latest, up-to-date edition.

Preview

SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING

Publisher: International Organization for Standardization

Published:

Available Formats: PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preliminary welding procedure specification
5 Welding procedure test
6 Test pieces and test specimens
7 Testing and examination
8 Range of qualification
9 Welding procedure qualification record
Annex A (informative) - Example of welding procedure
qualification - Test certificate
Annex B (informative) - Example of welding procedure
qualifications record form (WPQR)

Abstract - (Show below) - (Hide below)

This part of ISO 15614 specifies tests for the qualification of welding procedure specifications applicable to upset (resistance butt) welding and flash welding of metallic materials, e.g. with solid, tubular, flat or circular cross-section.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 44
Supersedes	ISO/DIS 15614-13 : 60.00 (2012) MIL W 6873 : C ISO 15614-13 : 2005

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 15614-13 : 2012	Identical
NF EN ISO 15614-13 : 2012	Identical
UNE EN ISO 15614-13 : 2013	Identical
NBN EN ISO 15614-13 : 2012	Identical
NEN EN ISO 15614-13 : 2012	Identical
NS EN ISO 15614-13 : 2012	Identical
I.S. EN ISO 15614-13:2012	Identical
PN EN ISO 15614-13 : 2012	Identical
SANS 15614-13 : 1ED 2008(R2013)	Identical
SN EN ISO 15614-13 : 2012	Identical
UNI EN ISO 15614-13 : 2012	Identical
SS-EN ISO 15614-13:2012	Identical
BS EN ISO 15614-13 : 2012	Identical
EN ISO 15614-13 : 2012	Identical
DIN EN ISO 15614-13 : 2012	Identical
DIN EN ISO 15614-13 E : 2012	Identical
DS EN ISO 15614-13 : 2012	Identical
SN EN ISO 15614-13 : 2012	Identical
PN EN ISO 15614-13 : 2012	Identical
SANS 15614-13 : 1ED 2008(R2013)	Identical
SS-EN ISO 15614-13:2012	Identical
GOST R ISO 15614-13 : 2009	Identical
DIN EN ISO 15614-13 : 2012	Identical
DIN EN ISO 15614-13 E : 2012	Identical
BS EN ISO 15614-13 : 2012	Identical
UNE EN ISO 15614-13 : 2013	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNE EN ISO 14732 : 2014	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013)
13/30284265 DC : 0	BS EN ISO 18278-1 - RESISTANCE WELDING - WELDABILITY - PART 1: ASSESSMENT OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS
BS EN ISO 14732 : 2013	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS
DIN EN ISO 14732 : 2013	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013)
04/30127152 DC : DRAFT DEC 2004	EN ISO 17660-1 - WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD BEARING WELDED JOINTS
BS EN ISO 15614-3 : 2008	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS
16/30336440 DC : DRAFT MAR 2016	BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN ISO 15614-3 E : 2008	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS
BIS IS 16003 : 2012	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
DIN EN 1090-2 E : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN ISO 14732 : 2013	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS
DIN EN ISO 14732 E : 2013	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013)
PREN 1090-2 : DRAFT 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
07/30168326 DC : DRAFT DEC 2007	BS ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES
10/30208622 DC : DRAFT JUNE 2010	BS ISO 15609-5 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING
SN EN ISO 15611 : 2004	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PREVIOUS WELDING EXPERIENCE (ISO 15611:2003)
08/30184312 DC : DRAFT SEP 2008	BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
DIN EN ISO 15614-3 : 2008	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS
UNE-EN 1090-2:2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN ISO 14732:2013	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013)
I.S. EN 1090-2:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN ISO 15614-3 : 2008	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS
EN 1092-1 : 2018	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
UNI EN 1092-1 : 2013	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
NF EN 1090-2 : 2009 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1092-1 : 2016	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
15/30320416 DC : 0	BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1092-1 E : 2013	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
I.S. EN ISO 15614-3:2008	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS
EN 1090-2 : 2008 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN ISO 15609-5 : 2012	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING (ISO 15609-5:2011)
BS EN 1090-2 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2 : 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 1092-1:2007	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
UNE EN 12952-6 : 2012	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
DIN EN ISO 17660-1 : 2006	WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS
DIN EN ISO 18278-1 : 2015	RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015)
DIN EN 12952-6 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
DIN EN ISO 17660-1 E : 2006	WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS
DIN EN ISO 18278-1 E : 2015	RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015)
BS EN ISO 17660-1 : 2006	WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS
UNE EN ISO 15609-5 : 2012	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING (ISO 15609-5:2011, CORRECTED VERSION 2011-12-01)
UNE EN ISO 18278-1 : 2015	RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015)
DIN EN 12952-6 E : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
ISO 15614-3 : 2008(R2017)	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS
ISO 15609-5 : 2011(R2016)	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING
ISO 14732 : 2013(R2018)	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS
DIN EN ISO 15609-5 E : 2012	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING (ISO 15609-5:2011)
ISO 17660-1 : 2006(R2010)	WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS
ISO 18278-1 : 2015	RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS
BS EN 12952-6 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
BS EN ISO 18278-1 : 2015	RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS
BS EN ISO 15609-5 : 2011	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING (ISO 15609-5:2011)
ONORM EN 1090-2 : 2012	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES

Standards Referencing This Book - (Show below) - (Hide below)

ISO 14271 : 2017	RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS
ISO 14732 : 2013(R2018)	WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS
ISO 5173 : 2009(R2018)	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
ISO 6520-2 : 2013(R2018)	WELDING AND ALLIED PROCESSES - CLASSIFICATION OF GEOMETRIC IMPERFECTIONS IN METALLIC MATERIALS - PART 2: WELDING WITH PRESSURE
ISO 15607 : 2003	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
ISO 15620 : 2000(R2016)	WELDING - FRICTION WELDING OF METALLIC MATERIALS
ISO 17637 : 2016	NON-DESTRUCTIVE TESTING OF WELDS - VISUAL TESTING OF FUSION-WELDED JOINTS
ISO 17638 : 2016	NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING
ISO 17639 : 2003(R2014)	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS
ISO 17640 : 2017	NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TECHNIQUES, TESTING LEVELS, AND ASSESSMENT
ISO 17643 : 2015	NON-DESTRUCTIVE TESTING OF WELDS - EDDY CURRENT TESTING OF WELDS BY COMPLEX-PLANE ANALYSIS
ISO 20482 : 2013(R2018)	METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST
ISO 15609-5 : 2011(R2016)	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING
ISO 23277 : 2015	NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING - ACCEPTANCE LEVELS
ISO 23278 : 2015	NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS
ISO 23279 : 2017	NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - CHARACTERIZATION OF DISCONTINUITIES IN WELDS
ISO 9015-1 : 2001(R2017)	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS
ISO 9015-2 : 2016	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS
ISO 6892-1 : 2016	METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE
ISO 11666 : 2010	NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - ACCEPTANCE LEVELS
ISO TR 15608 : 2017	WELDING - GUIDELINES FOR A METALLIC MATERIALS GROUPING SYSTEM
ISO 4063 : 2009(R2015)	WELDING AND ALLIED PROCESSES - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS
ISO 4136 : 2012(R2018)	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST

Add To Cart

Product Format

Quantity

add to cart

ISO 15614-13 : 2012(R2017)

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?