• There are no items in your cart

ISO 16063-21:2003

Current
Current

The latest, up-to-date edition.

Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

08-19-2003

ISO 16063-21:2003 describes the calibration of rectilinear vibration transducers by comparison. Although it mainly describes calibration using direct comparison to a standard calibrated by primary methods, the methods described can be applied between other levels in the calibration hierarchy.

ISO 16063-21:2003 specifies procedures for performing calibrations of rectilinear vibration transducers by comparison in the frequency range from 0,4 Hz to 10 kHz. It is primarily intended for those who are required to meet ISO standardized methods for the measurement of vibration under laboratory conditions, where the uncertainty of measurement is relatively small. It can also be used under field conditions, where the uncertainty of measurement may be relatively large.

From knowledge of all significant sources of uncertainty affecting the calibration, the expanded uncertainty can be evaluated using the methods given in ISO 16063-21. It also covers the assessment of uncertainties for calibrations performed using a check standard.

DevelopmentNote
Supersedes ISO/DIS 16063-21 (08/2003) Supersedes ISO 5347-3 (09/2003)
DocumentType
Standard
Pages
29
PublisherName
International Organization for Standardization
Status
Current
Supersedes

BS ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers In-situ calibration of transducers with built in calibration coil
BS ISO 16063-22 : 2005 METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER
16/30341458 DC : 0 BS ISO 16063-45 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 45: IN-SITU CALIBRATION OF TRANSDUCERS WITH BUILT IN CALIBRATION COIL
09/30191459 DC : 0 BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS
BS EN 15657:2017 Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
DIN EN 15657 E : 2017 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
UNI EN 15657-1 : 2009 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE
I.S. EN 15657-1:2009 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
DKD-R 3-1-1 : 2010 KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 1: GRUNDLAGEN
DIN EN 14366 E : 2005 LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS
BS EN ISO 10846-2:2008 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN ISO 10846-4:2003 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion
BS ISO 10302-2:2011 Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements
ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil
05/30064424 DC : DRAFT NOV 2005 ISO 10846-5 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: LOW FREQUENCY DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION (DRIVING POINT METHOD)
BS ISO 16063-43:2015 Methods for the calibration of vibration and shock transducers Calibration of accelerometers by model-based parameter identification
DIN EN 14366:2005-02 LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS
ECMA 275 : 3ED 2015 MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES
I.S. EN ISO 10846-2:2008 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
DIN EN 15657-1:2009-10 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
DKD-R 3-1-3 : 2003 KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - TEIL 3: SINUS- UND MULTISINUS-ANREGUNG
DIN EN 15657:2016-02 (Draft) ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
14/30313008 DC : 0 BS ISO 16063-43 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 43: CALIBRATION OF ACCELEROMETERS BY MODEL-BASED PARAMETER IDENTIFICATION
BS ISO 13373-2:2016 Condition monitoring and diagnostics of machines. Vibration condition monitoring Processing, analysis and presentation of vibration data
16/30341489 DC : 0 BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS
DIN EN ISO 10846-5:2009-07 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
ANSI S12.11-2 : 2013 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS
ISO 10846-2:2008 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
I.S. EN 14366:2005 LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS
EN 15657:2017 Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
UNI EN ISO 10846-5 : 2009 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
UNI EN ISO 10846-2 : 2008 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
03/315162 DC : DRAFT SEP 2003 ISO 16063-22 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22 - SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER
04/302070 DC : DRAFT JAN 2004 BS ISO 13373-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 2: PROCESSING, PRESENTATION AND ANALYSIS OF VIBRATION DATA
ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity
05/30103114 DC : DRAFT NOV 2005 ISO 10846-2 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION - DIRECT METHOD
DKD-R 3-1-4 : 2005 KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 4: PRIMAERKALIBRIERUNG VON SCHWINGUNGSMESSGERAE-TEN MIT SINUSFOERMIGER ANREGUNG UND INTERFEROMETRISCHER MESSUNG DER SCHWIN-GUNGSGROESSE
DIN ISO 16063-22 E : 2015 METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-22:2005 + AMD.1:2014)
I.S. EN 15657:2017 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
I.S. EN ISO 10846-5:2009 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
ISO 16063-22:2005 Methods for the calibration of vibration and shock transducers Part 22: Shock calibration by comparison to a reference transducer
ISO 10302-2:2011 Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements
ISO 13373-2:2016 Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data
DIN EN ISO 10846-4:2004-02 Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-4:2003
ISO 10846-5:2008 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
ISO 10846-4:2003 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
EN 15657-1:2009 Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
EN 14366:2004 Laboratory measurement of noise from waste water installations
EN ISO 10846-4 : 2003 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 4: DYNAMIC STIFFNESS OF ELEMENTS OTHER THAN RESILIENT SUPPORTS FOR TRANSLATORY MOTION (ISO 10846-4:2003)
EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
DIN ISO 16063-22:2015-04 METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-22:2005 + AMD.1:2014)
BS EN 15657-1:2009 Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
BS EN ISO 10846-5:2009 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
BS ISO 16063-41:2011 Methods for the calibration of vibration and shock transducers Calibration of laser vibrometers
17/30289056 DC : 0 BS ISO 16063-33 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 33: TESTING OF MAGNETIC FIELD SENSITIVITY
ISO 16063-43:2015 Methods for the calibration of vibration and shock transducers Part 43: Calibration of accelerometers by model-based parameter identification
ISO 16063-41:2011 Methods for the calibration of vibration and shock transducers Part 41: Calibration of laser vibrometers
BS ISO 21289:2008 Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data
BS ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers Testing of transverse vibration sensitivity
16/30333609 DC : 0 BS EN 15657 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
NF EN ISO 10846-5 : 2009 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
BS EN 14366:2004 Laboratory measurement of noise from waste water installations
ISO 21289:2008 Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data
DIN EN ISO 10846-2:2008-11 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
DIN EN 15657:2017-10 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS

ISO 266:1997 Acoustics — Preferred frequencies
ECA 4-02 : 2013 EVALUATION OF THE UNCERTAINTY OF MEASUREMENT IN CALIBRATION
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
ISO 16063-1:1998 Methods for the calibration of vibration and shock transducers Part 1: Basic concepts
ISO 16063-11:1999 Methods for the calibration of vibration and shock transducers Part 11: Primary vibration calibration by laser interferometry
ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
US$175.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.