• There are no items in your cart

ISO 16426:2002

Current
Current

The latest, up-to-date edition.

Fasteners — Quality assurance system
Available format(s)

PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy

Language(s)

English, French, Russian

Published date

11-18-2002

ISO 16426 specifies requirements for a fastener quality assurance system to be met by the fastener manufacturers and distributors. These requirements are intended to reduce or prevent the production of non-conforming fasteners with the objective of approaching zero defects for the characteristics specified.

This International Standard outlines the requirements from receipt of raw material through the manufacturing process to delivery at the distributor or the user, who is the installer.

Committee
ISO/TC 2/SC 7
DevelopmentNote
Supersedes ISO/DIS 16426 (11/2002)
DocumentType
Standard
Pages
12
PublisherName
International Organization for Standardization
Status
Current

12/30259649 DC : 0 BS ISO 1891-2 - FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS
16/30340613 DC : 0 BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
I.S. EN ISO 898-2:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS EN ISO 10683:2014 Fasteners. Non-electrolytically applied zinc flake coatings
UNE-EN ISO 10683:2015 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
UNE-EN ISO 898-1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
BS EN ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws
ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
BS EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress
I.S. EN ISO 3506-4:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS
DIN EN ISO 10683:2001-02 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
ONORM EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
10/30165716 DC : 0 BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
ISO 16228:2017 Fasteners — Types of inspection documents
11/30229160 DC : 0 BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
ISO 8992:2005 Fasteners — General requirements for bolts, screws, studs and nuts
DIN EN ISO 3506-3:2010-04 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
DIN EN ISO 3506-4:2010-04 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
DIN EN ISO 898-1:2013-05 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN ISO 898-5:2012-09 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
BS EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs
BS EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Nuts
I.S. EN ISO 898-1:2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
I.S. EN ISO 898-5:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
I.S. EN ISO 3506-3:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
I.S. EN ISO 16228:2018 FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
DIN ISO 8992:2005-09 Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
15/30280562 DC : 0 BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
ONORM EN 1515-4 : 2010 FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG
10/30165712 DC : 0 BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD
BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread
UNI EN ISO 10683 : 2014 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
UNE-EN ISO 898-2:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017)
DIN EN ISO 10683:2016-07 (Draft) FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws
BS EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
UNE-EN ISO 3506-2:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
UNI EN ISO 3506-2 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS
ONORM EN ISO 3506-2 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
UNI EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
ONORM EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
UNI EN ISO 3506-4 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 4: TAPPING SCREWS
UNI EN ISO 898-1 : 2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN ISO 3506-3 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
UNI EN ISO 898-5 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN ISO 1891-2 : 2015 FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS
UNE-EN ISO 1891-2:2015 Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)
15/30280509 DC : 0 BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY
BS EN ISO 1891-2:2014 Fasteners. Terminology Vocabulary and definitions for coatings
BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN ISO 1891-2:2014 Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)
IS 1367 : Part 3 : 2017 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
DIN EN 1515-4 E : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS EN ISO 16228:2018 Fasteners. Types of inspection documents
UNI EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
EN ISO 10683:2014 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
ASTM F 2688 : 2008 : R2014 : EDT 1 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers (Withdrawn 2019)
ASTM F 2688 : 2008 : R2014 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
I.S. EN ISO 3506-2:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
UNE-EN ISO 3506-3:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
I.S. EN ISO 3506-1:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
ISO 1891-2:2014 Fasteners Terminology Part 2: Vocabulary and definitions for coatings
EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
UNE-EN ISO 3506-4:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
IS 1367 : Part 1 : 2014 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br>
ASTM F 2688 : 2008 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
17/30335249 DC : 0 BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
BS ISO 8992:2005 Fasteners. General requirements for bolts, screws, studs and nuts
I.S. EN ISO 1891-2:2014 FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS (ISO 1891-2:2014)
I.S. EN ISO 10683:2014 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
ISO 10683:2014 Fasteners Non-electrolytically applied zinc flake coatings
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
BS EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
DIN EN ISO 898-2:2012-08 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
ONORM EN ISO 1891-2 : 2015 FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS (ISO 1891-2:2014)

ISO 15330:1999 Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
EN ISO 15330 : 1999 FASTENERS - PRELOADING TEST FOR THE DETECTION OF HYDROGEN EMBRITTLEMENT - PARALLEL BEARING SURFACE METHOD (ISO 15330:1999)
ISO 9001:2015 Quality management systems — Requirements
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 3269:2000 Fasteners Acceptance inspection
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.