ISO 16750-2:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-12-2023
English
11-05-2012
ISO 16750-2:2012 applies to electric and electronic systems/components for road vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle.
ISO 16750-2:2012 describes the electrical loads. Electromagnetic compatibility (EMC) is not covered by ISO 16750-2:2012. Electrical loads are independent from the mounting location, but can vary due to the electrical resistance in the vehicle wiring harness and connection system.
Committee |
ISO/TC 22/SC 32
|
DevelopmentNote |
Supersedes ISO/DIS 16750-2. (11/2012)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
UNE-ISO 16750-2:2015 | Identical |
SS-ISO 16750-2:2012 | Identical |
BS ISO 16750-2:2012 | Identical |
SN ISO 16750-2 : 2005 | Identical |
NEN ISO 16750-2 : 2006 | Identical |
10/30208924 DC : 0 | BS ISO 8854 - ROAD VEHICLES - ALTERNATORS WITH REGULATORS - TESTS METHODS AND GENERAL REQUIREMENTS |
PD IEC/TR 60601-4-2:2016 | Medical electrical equipment Guidance and interpretation. Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
BS ISO 8854:2012 | Road vehicles. Alternators with regulators. Test methods and general requirements |
12/30265053 DC : 0 | BS ISO 19072-2 - ROAD VEHICLES - CONNECTION INTERFACE FOR PYROTECHNIC DEVICES, TWO-WAY AND THREE-WAY CONNECTIONS - PART 2: TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
BS EN ISO 25197 : 2012 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE |
BS ISO 22902-7:2006 | Road vehicles. Automotive multimedia interface Physical specification |
PD CEN/TR 16152:2011 | Electronic fee collection. Personalisation and mounting of first mount OBE |
08/30174645 DC : DRAFT SEP 2008 | BS ISO 7637-2 - ROAD VEHICLES - ELECTRICAL DISTURBANCES FROM CONDUCTION COUPLING - PART 2: ELECTRICAL TRANSIENT CONDUCTION ALONG SUPPLY LINES ONLY |
06/30134245 DC : 0 | ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT APPLICATION PROGRAMMER INTERFACE (D-PDU API) |
BS ISO 16750-1:2006 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment General |
I.S. EN ISO 25197:2012 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012) |
OIML R 134-1 : 2006 | AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
ISO 22900-2:2017 | Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit (D-PDU API) |
ISO 19072-2:2013 | Road vehicles Connection interface for pyrotechnic devices, two-way and three-way connections Part 2: Test methods and general performance requirements |
ISO 27145-6:2015 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment |
UNE-EN 12645:2015 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
BS EN 12645:2014 | Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
EN 12645:2014 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
CEN/TR 16152:2011 | Electronic fee collection - Personalisation and mounting of first mount OBE |
DEFSTAN 23-6/4(2005) : 2005 | TECHNOLOGY GUIDANCE FOR MILITARY LOGISTICS VEHICLES |
ISO 21848:2005 | Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads |
01/714098 DC : DRAFT OCT 2001 | ISO 16750-1 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERAL |
11/30210815 DC : 0 | BS ISO 10924-2 - ROAD VEHICLES - CIRCUIT BREAKERS - PART 2: USER'S GUIDE |
UNE-ISO 16750-1:2013 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 1: General. |
ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
08/30185306 DC : DRAFT JULY 2008 | BS ISO 17386 - TRANSPORT INFORMATION AND CONTROL SYSTEMS - MANOEUVRING AIDS FOR LOW SPEED OPERATION (MALSO) - PERFORMANCE REQUIREMENTS AND TEST PROCEDURES |
BS ISO 15031-4:2014 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics External test equipment |
01/714407 DC : DRAFT OCT 2001 | ISO/DIS 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
06/30134242 DC : 0 | ISO 22900-1 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 1: HARDWARE DESIGN REQUIREMENTS |
BS ISO 16750-4:2010 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment Climatic loads |
I.S. EN 50436-1:2014 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
BS EN 50436-1:2014 | Alcohol interlocks. Test methods and performance requirements Instruments for drink-driving-offender programs |
OIML R 80-2 : 2017 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS |
DIN EN 12645:2015-02 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
I.S. EN 12645:2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
BS ISO 22900-2:2017 | Road vehicles. Modular vehicle communication interface (MVCI) Diagnostic protocol data unit (D-PDU API) |
13/30268103 DC : 0 | BS ISO 27145-6 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 6: EXTERNAL TEST EQUIPMENT |
11/30219766 DC : 0 | BS ISO 15031-4 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 4: EXTERNAL TEST EQUIPMENT |
BS ISO 22900-1:2008 | Road vehicles. Modular vehicle communication interface (MVCI) Hardware design requirements |
SAE J 1978 : 2002 | OBD 2 SCAN TOOL |
15/30300864 DC : 0 | BS ISO 19689 - MOTORCYCLES AND MOPEDS - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR DIAGNOSTICS - DIAGNOSTIC CONNECTOR AND RELATED ELECTRICAL CIRCUITS, SPECIFICATION AND USE |
ISO 19689:2016 | Motorcycles and mopeds Communication between vehicle and external equipment for diagnostics Diagnostic connector and related electrical circuits, specification and use |
05/30116650 DC : DRAFT MAY 2005 | ISO 16750-1 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERAL |
BS ISO 19072-2:2013 | Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections Test methods and general performance requirements |
16/30320037 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL |
17/30360159 DC : DRAFT JUL 2017 | BS ISO 16750-1 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERAL |
ISO 13766-1:2018 | Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions |
ISO 22902-7:2006 | Road vehicles Automotive multimedia interface Part 7: Physical specification |
ISO 10924-2:2014 | Road vehicles Circuit breakers Part 2: User's guide |
STANAG 2601 : 2017 | STANDARDIZATION OF ELECTRICAL SYSTEMS IN TACTICAL LAND VEHICLES |
SAE J 1962 : 2016 | DIAGNOSTIC CONNECTOR |
I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
UNI EN ISO 25197 : 2015 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE |
OIML R 126 : 2012 | EVIDENTIAL BREATH ANALYZERS |
CAN/CSA-Z627-16 | Breath alcohol ignition interlock devices |
ISO 8854:2012 | Road vehicles — Alternators with regulators — Test methods and general requirements |
ISO 26262-5:2011 | Road vehicles Functional safety Part 5: Product development at the hardware level |
DIN EN ISO 25197:2015-03 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012 + AMD 1:2014) |
IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
UNI EN 12645 : 2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
11/30211658 DC : 0 | BS EN ISO 25197 - SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEM FOR STEERING, SHIFT AND THROTTLE |
11/30227758 DC : 0 | BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API) |
12/30260709 DC : 0 | BS EN 50436-1 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
16/30316581 DC : 0 | BS EN ISO 13766-2 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMC REQUIREMENTS UNDER THE ASPECT OF FUNCTIONAL SAFETY |
16/30316578 DC : 0 | BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS |
09/30179100 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT: HARDWARE LEVEL |
08/30173382 DC : DRAFT AUG 2008 | BS ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
OIML R 117-1 : 2007 | DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
OIML R 21 : 2007 | TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT |
IEC TR 60601-4-2:2016 | Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
07/30134250 DC : 0 | BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API) |
BS ISO 19689:2016 | Motorcycles and mopeds. Communication between vehicle and external equipment for diagnostics. Diagnostic connector and related electrical circuits, specification and use |
14/30291315 DC : 0 | BS ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT (D-PDU API) |
05/30116657 DC : DRAFT MAY 2005 | ISO 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
UNE-EN ISO 25197:2013 | Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) |
ISO 22900-1:2008 | Road vehicles — Modular vehicle communication interface (MVCI) — Part 1: Hardware design requirements |
ISO 15031-4:2014 | Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 4: External test equipment |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
ISO/IEC/IEEE 8802-3:2017 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet |
ISO 25197:2012 | Small craft Electrical/electronic control systems for steering, shift and throttle |
ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
SAE USCAR 33 : 2013 | SPECIFICATION FOR TESTING AUTOMOTIVE LED MODULES |
BS ISO 27145-6:2015 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements External test equipment |
BS ISO 7637-2:2011 | Road vehicles. Electrical disturbances from conduction and coupling Electrical transient conduction along supply lines only |
ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
01/714406 DC : DRAFT OCT 2001 | ISO/DIS 16750-3 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 3: MECHANICAL LOADS |
BS ISO 26262-5:2011 | Road vehicles. Functional safety Product development at the hardware level |
OIML R 146-1 : 2016 | PROTEIN MEASURING INSTRUMENTS FOR CEREAL GRAIN AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
BS ISO 10924-2:2014 | Road vehicles. Circuit breakers User\'s guide |
PREN 50436-1 : DRAFT 2012 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
EN ISO 25197:2012/A1:2014 | SMALL CRAFT - ELECTRICAL/ELECTRONIC CONTROL SYSTEMS FOR STEERING, SHIFT AND THROTTLE (ISO 25197:2012/AMD 1:2014) |
S.R. CEN/TR 16152:2011 | ELECTRONIC FEE COLLECTION - PERSONALISATION AND MOUNTING OF FIRST MOUNT OBE |
BS ISO 21848:2005 | Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads |
EN 50436-1 : 2014 COR 2016 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
CISPR 12:2007+AMD1:2009 CSV | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
ISO 8854:2012 | Road vehicles — Alternators with regulators — Test methods and general requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.