ISO 16750-5:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-13-2023
English
04-06-2010
ISO 16750-5:2010 applies to electrical and electronic systems/components for road vehicles. ISO 16750-5:2010 describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle.
ISO 16750-5:2010 describes chemical loads. It is not designed to evaluate whether an electrical/electronic system/component is suitable for performing during continuous contact with an agent, such as a fuel pump immersed continuously in fuel.
Committee |
ISO/TC 22/SC 32
|
DevelopmentNote |
Supersedes ISO/DIS 16750-5. (04/2010)
|
DocumentType |
Standard
|
Pages |
7
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
SN ISO 16750-5:2013 | Identical |
SS-ISO 16750-5:2010 | Identical |
BS ISO 16750-5:2010 | Identical |
NEN ISO 16750-5 : 2004 | Identical |
ISO 19453-5:2018 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 5: Chemical loads |
ISO 10924-4:2015 | Road vehicles Circuit breakers Part 4: Medium circuit breakers with tabs (Blade type), Form CB15 |
12/30265053 DC : 0 | BS ISO 19072-2 - ROAD VEHICLES - CONNECTION INTERFACE FOR PYROTECHNIC DEVICES, TWO-WAY AND THREE-WAY CONNECTIONS - PART 2: TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
DIN EN 16882 E : 2017 | ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES |
BS ISO 22902-7:2006 | Road vehicles. Automotive multimedia interface Physical specification |
BS ISO 19453-5:2018 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Chemical loads |
UNE-ISO 6722-1:2013 | Road vehicles. 60 V and 600 V single-core cables. Part 1: Dimensions, test methods and requirements for copper conductor cables |
BS ISO 16750-1:2006 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment General |
ISO 19072-2:2013 | Road vehicles Connection interface for pyrotechnic devices, two-way and three-way connections Part 2: Test methods and general performance requirements |
IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
DEFSTAN 23-6/4(2005) : 2005 | TECHNOLOGY GUIDANCE FOR MILITARY LOGISTICS VEHICLES |
DIN ISO 8820-1:2011-05 | ROAD VEHICLES - FUSE-LINKS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
01/714098 DC : DRAFT OCT 2001 | ISO 16750-1 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERAL |
14/30291876 DC : 0 | BS ISO 10924-4 - ROAD VEHICLES - CIRCUIT BREAKERS - PART 4: MEDIUM CIRCUIT BREAKERS WITH TABS (BLADE TYPE), FORM CB15 |
07/30156264 DC : 0 | BS ISO 8820-1 - ROAD VEHICLES - FUSE-LINKS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
BS ISO 6856:2005 | Road vehicles. Unscreened high-voltage ignition cable assemblies. Test methods and general requirements |
BS ISO 19453-1:2018 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles General |
BS ISO 6722-1:2011 | Road vehicles. 60 V and 600 V single-core cables Dimensions, test methods and requirements for copper conductor cables |
BS EN 16882:2016 | Road vehicles. Security of the mechanical seals used on tachographs. Requirements and test procedures |
BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
UNE-ISO 16750-1:2013 | Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 1: General. |
08/30185306 DC : DRAFT JULY 2008 | BS ISO 17386 - TRANSPORT INFORMATION AND CONTROL SYSTEMS - MANOEUVRING AIDS FOR LOW SPEED OPERATION (MALSO) - PERFORMANCE REQUIREMENTS AND TEST PROCEDURES |
BS ISO 10924-5:2016 | Road vehicles. Circuit breakers Circuit breakers with bolt with rated voltage of 450 V |
01/714407 DC : DRAFT OCT 2001 | ISO/DIS 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
ISO 6856:2005 | Road vehicles Unscreened high-voltage ignition cable assemblies Test methods and general requirements |
DIN EN 16882:2017-06 | ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES |
17/30295957 DC : DRAFT MAR 2017 | BS ISO 19453-1 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT FOR DRIVE SYSTEM OF ELECTRIC PROPULSION VEHICLES - PART 1: GENERAL |
17/30336601 DC : DRAFT MAR 2017 | BS ISO 19453-5 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT FOR DRIVE SYSTEM OF ELECTRIC PROPULSION VEHICLES - PART 5: CHEMICAL LOADS |
ISO 6722-1:2011 | Road vehicles — 60 V and 600 V single-core cables — Part 1: Dimensions, test methods and requirements for copper conductor cables |
BS ISO 13044-2:2013 | Road vehicles. Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations 50 mm fifth wheel couplings. Electrical and pneumatic interface |
BS ISO 10924-1:2016 | Road vehicles. Circuit breakers Definitions and general test requirements |
05/30116650 DC : DRAFT MAY 2005 | ISO 16750-1 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERAL |
BS ISO 19072-2:2013 | Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections Test methods and general performance requirements |
13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
16/30320037 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL |
17/30360159 DC : DRAFT JUL 2017 | BS ISO 16750-1 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERAL |
BS ISO 10924-4:2015 | Road vehicles. Circuit breakers Medium circuit breakers with tabs (Blade type), Form CB15 |
BIS IS 2577-1 : 2012 | ROAD VEHICLES - FUSE-LINKS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
ISO 22902-7:2006 | Road vehicles Automotive multimedia interface Part 7: Physical specification |
I.S. EN 16882:2016 | ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES |
I.S. EN 62752:2016&AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
ISO 13044-2:2013 | Road vehicles Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations Part 2: 50 mm fifth wheel couplings Electrical and pneumatic interface |
ISO 26262-5:2011 | Road vehicles Functional safety Part 5: Product development at the hardware level |
ISO/PAS 19363:2017 | Electrically propelled road vehicles Magnetic field wireless power transfer Safety and interoperability requirements |
16/30316581 DC : 0 | BS EN ISO 13766-2 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMC REQUIREMENTS UNDER THE ASPECT OF FUNCTIONAL SAFETY |
09/30179100 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT: HARDWARE LEVEL |
15/30322686 DC : 0 | BS EN 16882 - ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES |
ISO 19453-1:2018 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 1: General |
08/30183427 DC : DRAFT DEC 2008 | BS ISO 10924-1 - ROAD VEHICLES - CIRCUIT BREAKERS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
ISO 10924-1:2016 | Road vehicles Circuit breakers Part 1: Definitions and general test requirements |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
DIN EN 16882:2015-09 (Draft) | ROAD VEHICLES - SECURITY OF THE MECHANICAL SEALS USED ON TACHOGRAPHS - REQUIREMENTS AND TEST PROCEDURES |
ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
UNE-EN 16882:2017 | Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures |
EN 16882:2016 | Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures |
ISO 8820-1:2014 | Road vehicles Fuse-links Part 1: Definitions and general test requirements |
12/30210808 DC : DRAFT MAR 2012 | BS ISO 13044-2 - ROAD VEHICLES - FULLY AUTOMATIC COUPLING SYSTEMS 24 V (FACS) FOR HEAVY COMMERCIAL VEHICLE COMBINATIONS - PART 2: 50 MM FIFTH WHEEL COUPLINGS - ELECTRICAL AND PNEUMATIC INTERFACE |
CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
13/30278246 DC : 0 | BS ISO 8820-1 - ROAD VEHICLES - FUSE-LINKS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
BS ISO 26262-5:2011 | Road vehicles. Functional safety Product development at the hardware level |
BS ISO 8820-1:2014 | Road vehicles. Fuse-links Definitions and general test requirements |
15/30291873 DC : 0 | BS ISO 10924-1 - ROAD VEHICLES - CIRCUIT BREAKERS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
14/30291870 DC : 0 | BS ISO 10924-5 - ROAD VEHICLES - CIRCUIT BREAKERS - PART 5: CIRCUIT BREAKERS WITH TABS WITH RATED VOLTAGE OF 450 V |
ISO 10924-5:2016 | Road vehicles Circuit breakers Part 5: Circuit breakers with bolt with rated voltage of 450 V |
UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
ISO/IEC/IEEE 8802-3:2017 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet |
ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
ISO 4926:2006 | Road vehicles Hydraulic braking systems Non-petroleum-base reference fluids |
DIN 51635:1999-05 | MINERAL SPIRITS - FAM STANDARD MINERAL SPIRIT - REQUIREMENTS |
DIN 51524-3:2016-08 (Draft) | PRESSURE FLUIDS - HYDRAULIC OILS - PART 3: HVLP HYDRAULIC OILS, MINIMUM REQUIREMENTS |
ISO 22241-1:2006 | Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements |
DIN 53160:1974-06 | TESTING OF COLOURED TOYS FOR RESISTANCE TO SALIVA AND PERSPIRATION |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.