ISO 18153:2003
Current
Current
The latest, up-to-date edition.
In vitro diagnostic medical devices — Measurement of quantities in biological samples — Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
08-25-2003
ISO 18153:2003 specifies how to assure the metrological traceability of values assigned to calibrators and control materials intended to establish or verify trueness of measurement of the catalytic concentration of enzymes.
The calibrators and control materials are those provided by the manufacturers as part of, or to be used together with, in vitro diagnostic medical devices.
The following subjects are outside the scope of ISO 18153:2003: requirements for the design or selection of a reference measurement procedure; quantities involving mass of enzyme or immunoreactivity of enzymes; control materials that do not have an assigned value and are used only for assessing the precision of a measurement procedure, either its repeatability or reproducibility (precision control materials); control materials intended for intralaboratory quality control purposes and supplied with intervals of suggested acceptable values, each interval obtained by interlaboratory consensus with respect to one specified measurement procedure, and with limiting values that are not metrologically traceable; metrological traceability of routine results to the product calibrator and their relations to any medical discrimination limit; properties involving nominal and ordinal scales.
| Committee |
ISO/TC 212
|
| DevelopmentNote |
Supersedes ISO/DIS 18153 (08/2003)
|
| DocumentType |
Standard
|
| Pages |
10
|
| ProductNote |
THIS STANDARD ALSO REFERS TO prEN ISO 17511
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| GOST R ISO 18153 : 2006 | Identical |
| NEN EN ISO 18153 : 2003 | Identical |
| I.S. EN ISO 18153:2003 | Identical |
| PN EN ISO 18153 : 2006 | Identical |
| SN EN ISO 18153 : 2003 | Identical |
| UNE-EN ISO 18153:2004 | Identical |
| UNI EN ISO 18153 : 2004 | Identical |
| SS-EN ISO 18153:2004 | Identical |
| BS EN ISO 18153:2003 | Identical |
| EN ISO 18153:2003 | Identical |
| NF EN ISO 18153 : 2004 | Identical |
| DIN EN ISO 18153:2003-11 | Identical |
| BS EN ISO 18113-2:2011 | In vitro diagnostic medical Devices. Information supplied by the manufacturer (labelling) In vitro diagnostic reagents for professional use |
| UNE-EN ISO 18113-2:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2009) |
| CSA ISO 14971 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| ISO 16142-2:2017 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| I.S. EN ISO 15194:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| I.S. EN ISO 15195:2003 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| 06/30146522 DC : 0 | BS ISO 18113-4 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 4: IN VITRO DIAGNOSTIC REAGENTS FOR SELF-TESTING |
| 06/30146515 DC : 0 | BS ISO 18113-2 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 2: IN VITRO DIAGNOSTIC REAGENTS FOR PROFESSIONAL USE |
| EN ISO 17511:2003 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| ANSI/AAMI/ISO 16142-2:2017 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| CEI UNI EN ISO 14971 : 2013 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| I.S. EN ISO 14971:2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| DIN EN ISO 18113-2:2013-01 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 2: IN VITRO DIAGNOSTIC REAGENTS FOR PROFESSIONAL USE (ISO 18113-2:2009) |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| BS EN ISO 15195:2003 | Laboratory medicine. Requirements for reference measurement laboratories |
| BS EN ISO 14971:2012 | Medical devices. Application of risk management to medical devices |
| ISO 15195:2003 | Laboratory medicine Requirements for reference measurement laboratories |
| EN 14136:2004 | Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
| UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| BS EN ISO 15194:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
| BS ISO 16142-2:2017 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| UNI EN ISO 18113-2 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 2: IN VITRO DIAGNOSTIC REAGENTS FOR PROFESSIONAL USE |
| 07/30157023 DC : 0 | BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| 11/30208525 DC : 0 | BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| 06/30146511 DC : 0 | BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| UNI CEI EN ISO 14971 : 2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| AAMI ISO 14971 : 2007 : R2010 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| NF EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ISO 18113-2:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 2: In vitro diagnostic reagents for professional use |
| BS EN ISO 17511:2003 | In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
| ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
| EN ISO 15194:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| DIN EN ISO 18113-1:2013-01 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| I.S. EN ISO 18113-2:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 2: IN VITRO DIAGNOSTIC REAGENTS FOR PROFESSIONAL USE (ISO 18113-2:2009) |
| CSA ISO 14971 : 2007 : R2017 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 14971 : 2007 : R2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| UNI EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| PREN ISO 15197 : DRAFT 2011 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| EN ISO 15195:2003 | Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| BS EN 14136:2004 | Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
| DIN EN 14136:2004-08 | Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
| DIN EN ISO 15195:2004-01 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| CLSI C49:2018(R2023) | Analysis of Body Fluids in Clinical Chemistry |
| CLSI EP34:2018(R2023) | Establishing and Verifying an Extended Measuring Interval Through Specimen Dilution and Spiking |
| CLSI EP12:2023 | Evaluation of Qualitative, Binary Output Examination Performance |
| EN 12286:1998/A1:2000 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| EN 12287 : 1999 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - DESCRIPTION OF REFERENCE MATERIALS |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.