• There are no items in your cart

ISO 186:2002

Current
Current

The latest, up-to-date edition.

Paper and board — Sampling to determine average quality
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

03-14-2002

This Iinternational Standard specifies a method of obtaining a representative sample from a lot of paper or board, including solid and corrugated fibreboard (see ISO 4046:1978), for testing to determine whether or not its average quality complies with set specifications.

It defines the conditions which apply when sampling is carried out to resolve disputes between buyer and seller relating to a defined lot of paper or board, which has been or is being delivered.

NOTE If less than 50 % of the lot is available for sampling, then sampling in terms of this International Standard will be invalid in the absence of agreement to the contrary.

The method is unsuitable for determining the variability within a lot.

In cases where International Standards make reference to sampling according to this standard but where such sampling is impossible, impractical or inappropriate, and where no dispute is involved, guidance is given in normative annex A.

Committee
ISO/TC 6/SC 2
DevelopmentNote
Supersedes ISO/FDIS 186 (04/2002)
DocumentType
Standard
Pages
9
PublisherName
International Organization for Standardization
Status
Current
Supersedes

DIN EN ISO 9073-5:2009-01 TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
DIN ISO 16260:2016-10 (Draft) PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016)
AAMI ISO 11607-1 : 2006 : R2010 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS
NF ISO 2493-1 : 2011 PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION
ISO 9895:2008 Paper and board — Compressive strength — Short-span test
I.S. EN ISO 12625-12:2010 TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY
BS 7304-1(1990) : 1990 AMD 7008 METHODS OF TEST FOR NONWOVENS - DETERMINATION OF MASS PER UNIT AREA
BS ISO 20494:2017 Paper. Requirements for stability for general graphic applications
05/30103541 DC : DRAFT MAY 2005 ISO 22891 - PAPER - DETERMINATION OF TRANSMITTANCE BY DIFFUSE REFLECTANCE MEASUREMENT
15/30302582 DC : 0 BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES)
16/30325728 DC : 0 BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY)
14/30287209 DC : 0 BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS)
BS EN 60641-2:2004 Pressboard and presspaper for electrical purposes Methods of tests
NF ISO 16532-3 : 2010 PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS
03/312214 DC : DRAFT AUG 2003 EN 1104 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS
11/30247446 DC : 0 BS EN ISO 12625-11 - TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH
BS EN 16640:2017 Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method
07/30164326 DC : 0 BS ISO 16532-1 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: GREASE PERMEABILITY METHOD
09/30210529 DC : 0 BS ISO 12625-13 - TISSUE PAPER AND TISSUE PRODUCTS - PART 13: DETERMINATION OF THE SPECTRAL REFLECTANCE FACTOR (BRIGHTNESS) AT THE WAVELENGTH R 457 NM WITH AND WITHOUT UV STIMULUS AND OPACITY
ASTM D 585 : 1997 : R2007 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product (Withdrawn 2010)
ISO 13821:2002 Corrugated fibreboard Determination of edgewise crush resistance Waxed edge method
UNI ISO 12830 : 2012 PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM
DIN 53113:1990-06 DETERMINING THE BURSTING STRENGTH OF PAPER
BS ISO 16532-3:2010 Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers
BS ISO 11480:2017 Pulp, paper and board. Determination of total chlorine and organically bound chlorine
14/30287212 DC : 0 BS ISO 11475 - PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, D65/10 DEGREES (OUTDOOR DAYLIGHT)
BS ISO 3781:2011 Paper and board. Determination of tensile strength after immersion in water
DIN EN ISO 12625-12 E : 2010 TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY
BS ISO 16260:2016 Paper and board. Determination of internal bond strength
11/30253304 DC : 0 BS ISO 6588-1 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION
16/30325910 DC : 0 BS EN 233 - WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS
UNI ISO 11108 : 2011 INFORMATION AND DOCUMENTATION - ARCHIVAL PAPER - REQUIREMENTS FOR PERMANENCE AND DURABILITY
NF ISO 29681 : 2010 PAPER, BOARD AND PULPS - DETERMINATION OF PH OF SALTED WATER EXTRACTS
BS ISO 11556:2005 Paper and board. Determination of curl using a single vertically suspended test piece
BS ISO 8791-2:2013 Paper and board. Determination of roughness/smoothness (air leak methods) Bendtsen method
BS EN 60819-2:2002 Non-cellulosic papers for electrical purposes Methods of test
06/30159593 DC : 0 BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
DIN EN 16640:2015-09 (Draft) BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
BS ISO 2470-2:2008 Paper, board and pulps. Measurement of diffuse blue reflectance factor Outdoor daylight conditions (D65 brightness)
EN ISO 638:2008 Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008)
16/30325457 DC : 0 BS ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD
BS ISO 3783:2006 Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model)
16/30325454 DC : 0 BS EN ISO 287 - PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN-DRYING METHOD
02/704679 DC : DRAFT MAY 2002 PREN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD
DIN ISO 3039:2011-06 Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010)
ISO 29681:2009 Paper, board and pulps Determination of pH of salted water extracts
99/123128 DC : DRAFT SEP 99 ISO/DIS 11607 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES
DIN EN 16453:2014-06 PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD
12/30242237 DC : 0 BS ISO 8791-2 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD
BS ISO 16945:2014 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
17/30351717 DC : 0 BS EN ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS
BS ISO 15994:2005 Graphic technology. Testing of prints. Visual lustre
ANSI/AAMI/ISO 11607-1:2006/(R)2015 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS
BS EN ISO 9073-5:2008 Textiles. Test methods for nonwovens Determination of resistance to mechanical penetration (ball burst procedure)
DIN ISO 1924-3:2007-06 Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) (ISO 1924-3:2005)
10/30202469 DC : 0 BS ISO 12192 - PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD
BS EN ISO 12625-11:2012 Tissue paper and tissue products Determination of wet ball burst strength
09/30172818 DC : 0 BS ISO 15320 - PAPER, BOARD AND PULPS - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT
DD ENV 12625-2:1999 Tissue paper and tissue products Procedures for sampling and conditioning
BS 7304-3(1990) : 1990 AMD 7010 METHODS OF TEST FOR NON-WOVENS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION
BS ISO 9073-6 : 2000 AMD 14899 TEXTILES - TEST METHODS FOR NONWOVENS - PART 6: ABSORPTION
UNI ISO 5636-5 : 2014 PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD
BS ISO 14968:1999 Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets
07/30164319 DC : 0 BS ISO 2470-2 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS)
09/30173892 DC : 0 BS ISO 16532-3 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS
I.S. EN 1104:2005 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFF - DETERMINATION OF TRANSFER OF ANTIMICROBIC CONSTITUENTS
AAMI ISO 11607-1 : 2006 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS
ISO 5636-3:2013 Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
ISO 12830:2011 Paper, board and pulps Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
I.S. EN 16785-1:2015 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
ISO 22414:2004 Paper — Cut-size office paper — Measurement of edge quality
I.S. EN ISO 9073-18:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
I.S. EN ISO 1974:2012 PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD (ISO 1974:2012)
S.R. CEN/TS 16640:2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
BIS IS/ISO 2470-2 : 2008 PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS)
I.S. EN ISO 3035:2011 CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 3035:2011)
PREN 646 : DRAFT 2017 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD
ISO 5636-5:2013 Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
DIN EN 1230-2:2010-02 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT)
ISO 19594:2017 Graphic technology Test method for the determination of the binding strength for perfect-bound products Page-pull test working upwards
DIN EN 646:2006-07 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD
UNE-EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
17/30345786 DC : 0 BS EN 646 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD
I.S. EN 16640:2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
UNE-EN ISO 11607-1:2017 Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014)
17/30333593 DC : 0 BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING
ISO 3039:2010 Corrugated fibreboard Determination of grammage of the component papers after separation
UNE-ISO 8787:2012 Paper and board. Determination of capillary rise. Klemm method
ASTM D 585 : 1997 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
I.S. EN ISO 638:2008 PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD
ISO 11475:2017 Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)
ISO 2493-2:2011 Paper and board Determination of bending resistance Part 2: Taber-type tester
ISO 3037:2013 Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
ISO 12625-7:2014 Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight)
EN 60819-2:2001 Non-cellulosic papers for electrical purposes - Part 2: Methods of test
DIN EN ISO 9073-9:2008-06 TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT
EN ISO 12625-7:2014 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
DIN EN ISO 9073-14 E : 2007 TEXTILES - TEST METHODS FOR NONWOVENS - PART 14: COVERSTOCK WETBACK
DIN EN ISO 8254-1 E : 2009 PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
DIN EN 15519 E : 2008 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT
BS EN 29073-1:1992 Methods of test for nonwovens Methods of test for nonwovens. Determination of mass per unit area
BS EN ISO 12625-1:2011 Tissue paper and tissue products General guidance on terms
BS EN ISO 15318:2000 Pulp, paper and board. Determination of 7 specified polychlorinated biphenyls (PCB)
ISO 2759:2014 Board — Determination of bursting strength
ISO 9073-5:2008 Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
UNE-EN ISO 12625-1:2012 Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011)
BS EN ISO 8254-1:2009 Paper and board. Measurement of specular gloss 75 degree gloss with a converging beam, TAPPI method
UNE-EN ISO 12625-7:2015 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014)
BS EN ISO 9862:2005 Geosynthetics. Sampling and preparation of test specimens
BS EN ISO 8254-2:2003 Paper and board. Measurement of specular gloss 75° gloss with a parallel beam, DIN method
BS EN ISO 12625-4:2016 Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
BS EN ISO 2759:2014 Board. Determination of bursting strength
DIN 55468-2:1999-03 CORRUGATED FIBREBOARD - PART 2: WET STRENGTH FIBREBOARD REQUIREMENTS AND TESTING
I.S. EN ISO 12625-9:2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015)
EN 12281:2002 Printing and business paper - Requirements for copy paper for dry toner imaging processes
DIN EN ISO 9073-13:2007-05 Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006)
ONORM EN ISO 12625-7 : 2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014)
DIN ISO 5630-5:2017-03 Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 ?C (ISO 5630-5:2008)
EN ISO 12625-5:2016 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
EN 12283:2002 Printing and business paper - Determination of toner adhesion
EN 1230-1:2009 Paper and board intended to come into contact with foodstuffs — Sensory analysis — Part 1: Odour
CEN/TS 16640 : 2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
EN ISO 12625-6:2016 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
DIN EN ISO 534:2012-02 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
DIN EN ISO 9073-14:2007-05 Textiles - Test methods for nonwovens - Part 14: Coverstock wetback (ISO 9073-14:2006)
EN 16640:2017/AC:2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
EN ISO 12625-4:2016 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
I.S. EN ISO 9073-14:2007 TEXTILES - TEST METHODS FOR NONWOVENS - PART 14: COVERSTOCK WETBACK
ONORM EN ISO 12625-12 : 2010 TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY
I.S. EN ISO 9073-13:2007 TEXTILES - TEST METHODS FOR NONWOVENS - PART 13: REPEATED LIQUID STRIKE-THROUGH TIME
ONORM EN ISO 535 : 2014 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014)
ONORM EN ISO 3037 : 2013 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013)
DIN ISO 3034 E : 2016 CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011)
04/30125003 DC : DRAFT NOV 2004 IEC 60819-3-3 ED.2 - NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS
BS ISO 8791-3:2017 Paper and board. Determination of roughness/smoothness (air leak methods) Sheffield method
07/30130569 DC : 0 BS ISO 22754 - PULP AND PAPER - DETERMINATION OF THE EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC NUMBER) BY INFRARED REFLECTANCE MEASUREMENT
ISO 3783:2006 Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)
BS 7304-4(1990) : AMD 7011 METHODS OF TEST FOR NON-WOVENS - DETERMINATION OF TEAR RESISTANCE
BS ISO 13821:2001 Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
ISO 1924-3:2005 Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min)
UNE-ISO 6588-1:2013 Paper, board and pulps. Determination of pH of aqueous extracts. Part 1: Cold extraction
I.S. EN ISO 9073-15:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
03/309374 DC : DRAFT JUNE 2003 ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION
15/30274545 DC : 0 BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES
NF EN ISO 287 : 2009 PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN-DRYING METHOD
BS ISO 8784-1:2014 Pulp, paper and board. Microbiological examination Enumeration of bacteria and bacterial spores based on disintegration
ISO 2470:1999 Paper, board and pulps Measurement of diffuse blue reflectance factor (ISO brightness)
DIN ISO 5630-4 E : 2017 PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986)
BS ISO 5626:1993 Paper. Determination of folding endurance
15/30323953 DC : 0 BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH
15/30323949 DC : 0 BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION
BS ISO 9416:2017 Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
DIN EN ISO 3035:2012-02 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
NF EN ISO 12625-12 : 2010 TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY
BS EN ISO 1974:2012 Paper. Determination of tearing resistance. Elmendorf method
BS ISO 11108:1996 Information and documentation. Archival paper. Requirements for permanence and durability
ISO 15994:2005 Graphic technology Testing of prints Visual lustre
BS EN ISO 12625-12:2010 Tissue paper and tissue products Determination of tensile strength of perforated lines. Calculation of perforation efficiency
BS EN ISO 12625-16:2015 Tissue paper and tissue products Determination of optical properties. Opacity (paper backing). Diffuse reflectance method
BS ISO 16762:2016 Graphic technology. Post-press. General requirements for transfer, handling and storage
DIN ISO 16260 E : 2017 PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016)
BS EN 1104:2005 Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents
BS ISO 778:2005 Paper, board and pulp. Determination of acid-soluble copper
DIN EN ISO 11607-2:2014-11 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006 + AMD 1.:2014)
I.S. EN ISO 535:2014 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014)
05/30103535 DC : DRAFT MAY 2005 ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR
UNE-ISO 15754:2012 Paper and board - Determination of z-directional tensile strength
UNE-ISO 12192:2017 Paper and board. Determination of compressive strength. Ring crush method
09/30207367 DC : 0 BS ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL PRINCIPLES FOR THE USE OF TERMS
BS EN ISO 9073-15:2008 Textiles. Test methods for nonwovens Determination of air permeability
DIN EN ISO 12625-15:2015-05 TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015)
BS ISO 11476:2010 Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions)
10/30202472 DC : 0 BS ISO 3035 - CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE
DIN ISO 11476:2017-10 PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) (ISO 11476:2016)
BS ISO 12192:2011 Paper and board. Determination of compressive strength. Ring crush method
BS ISO 5636-4:2013 Paper and board. Determination of air permeance (medium range) Sheffield method
07/30169952 DC : DRAFT AUG 2007 ISO 9073-5 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
BS ISO 16532-2:2007 Paper and board. Determination of grease resistance Surface repellency test
11/30218551 DC : 0 BS ISO 8784-1 - PULP, PAPER AND BOARD - MICROBIOLOGICAL EXAMINATION - PART 1: ENUMERATION OF BACTERIA AND BACTERIAL SPORES BASED ON DISINTEGRATION
DIN EN ISO 535:2014-06 Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014)
ISO 6588-1:2012 Paper, board and pulps Determination of pH of aqueous extracts Part 1: Cold extraction
NF ISO 2493-2 : 2011 PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 2: TABER-TYPE TESTER
BS ISO 5636-3:2013 Paper and board. Determination of air permeance (medium range) Bendtsen method
09/30181245 DC : 0 BS ISO 3039 - CORRUGATED FIBREBOARD - DETERMINATION OF GRAMMAGE OF THE COMPONENT PAPERS AFTER SEPARATION
12/30252903 DC : 0 BS ISO 15397 - GRAPHIC TECHNOLOGY - COMMUNICATION OF GRAPHIC PAPER PROPERTIES
ISO 15359:1999 Paper and board Determination of the static and kinetic coefficients of friction Horizontal plane method
03/316095 DC : DRAFT OCT 2003 BS ISO 1924-3 - PAPER AND BOARD - TENSILE STRENGTH, STRAIN AT BREAK, TENSILE ENERGY ABSORPTION AND TENSILE STIFFNESS - PART 3: CONSTANT RATE OF ELONGATION METHOD (100 MM/MIN)
BS ISO 5631:2000 Paper and board. Determination of colour (C/2°). Diffuse reflectance method
BS ISO 2469:2014 Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor)
ISO 8791-4:2007 Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method
04/30094395 DC : DRAFT JUL 2004 ISO 9073-13 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 13: REPEATED LIQUID STRIKE-THROUGH TIME
ISO 16532-3:2010 Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers
ISO 2493:1992 Paper and board Determination of resistance to bending
I.S. EN ISO 7263:2011 CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING
ISO 22891:2013 Paper Determination of transmittance by diffuse reflectance measurement
I.S. EN ISO 11607-2:2017 & LC:2017 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006, INCLUDING AMD 1:2014)
ISO 9416:2017 Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
I.S. EN ISO 9073-11:2005 TEXTILES - TEST METHODS FOR NONWOVENS - PART 11: RUN-OFF
UNE-ISO 5636-3:2015 Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method
BS 1248-3:1990 Wallcoverings in roll form Specification for wallcoverings for subsequent decoration
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
I.S. EN 646:2006 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF COLOUR FASTNESS OF DYED PAPER AND BOARD
ISO/TS 17958:2013 Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s)
I.S. EN 60819-3-3:2011 NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED ARAMID (AROMATIC POLYAMIDE) PAPERS (IEC 60819-3-3:2011)
ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
AAMI ISO 11607-2:2006 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES
ISO 16763:2016 Graphic technology Post-press Requirements for bound products
UNI EN ISO 12625-11 : 2013 TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH
DIN EN ISO 12625-11:2013-04 TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012)
ISO 11476:2016 Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions)
DIN EN 1104:2005-11 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS; DETERMINATION OF TRANSFER OF ANTIMICROBIC CONSTITUENTS
NF ISO 12830 : 2011 PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM
EN ISO 12625-11:2012 Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012)
UNI ISO 6588-1 : 2013 PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION
UNI EN 16453 : 2014 PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD
EN 648:2006 Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board
BS EN 648:2006 Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
ISO 12625-3:2014 Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
DIN EN 14719 E : 2005 PULP, PAPER AND BOARD - DETERMINATION OF THE DIISOPROPYLNAPHTHALENE (DIPN) CONTENT BY SOLVENT EXTRACTION
DIN EN ISO 9706 E : 2010 INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE
DIN EN ISO 534 E : 2012 PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011)
BS EN ISO 15755:2000 Paper and board. Estimation of contraries
UNE-EN ISO 3037:2013 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
UNE-EN ISO 536:2013 Paper and board - Determination of grammage (ISO 536:2012)
UNE-EN 1230-2:2010 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
BS EN ISO 12625-5:2016 Tissue paper and tissue products Determination of wet tensile strength
BS EN ISO 2758:2014 Paper. Determination of bursting strength
I.S. EN ISO 12625-3:2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014)
I.S. EN 233:2016 WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS
I.S. EN ISO 12625-7:2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014)
I.S. EN ISO 12625-5:2016 TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016)
EN ISO 9073-4:1997 TEXTILES - TEST METHODS FOR NONWOVENS - PART 4: DETERMINATION OF TEAR RESISTANCE
DIN 53107:1982-05 DETERMINING THE SMOOTHNESS OF PAPER AND BOARD BY THE BEKK METHOD
DIN 55468-1:1999-03 CORRUGATED FIBREBOARD - PART 1: REQUIREMENTS AND TESTING
I.S. EN 1230-1:2009 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR
I.S. EN ISO 9073-9:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT
I.S. EN ISO 8254-2:2016 PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 2: 75 DEGREE GLOSS WITH A PARALLEL BEAM, DIN METHOD (ISO 8254-2:2016)
I.S. EN ISO 15320:2011 PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT
I.S. EN ISO 12625-8:2010 TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER-ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD
I.S. EN ISO 1924-2:2009 PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN)
I.S. EN ISO 3037:2013 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013)
I.S. EN ISO 12625-6:2016 TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE
I.S. EN ISO 2758:2014 PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014)
I.S. EN ISO 9073-4:1998 TEXTILES - TEST METHODS FOR NONWOVENS - PART 4: DETERMINATION OF TEAR RESISTANCE
I.S. EN ISO 2759:2014 BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014)
I.S. EN ISO 8254-1:2009 PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
I.S. EN ISO 534:2011 PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011)
I.S. EN ISO 12625-4:2016 TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION
UNI ISO 16532-1 : 2009 PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: PERMEABILITY TEST
VDE 0311-35 : 1988 CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - SPECIFICATIONS; SPECIAL PAPERS
DIN EN 16640:2017-08 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
DIN VDE 0311-32 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; CAPACITOR PAPERS
VDE 0311-34 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES - SPECIFICATION; ELECTROLYTIC CAPACITOR PAPERS
DIN VDE 0311-31 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; GENERAL PURPOSE ELECTRICAL PAPERS
BS 2782-8:Method 820A:1996 Methods of testing plastics. Other properties Determination of water vapour transmission rate (dish method)
BS 3631:1984 Method for determination of ash of paper and board
ONORM EN ISO 12625-15 : 2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015)
DIN VDE 0311-34 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; ELECTROLYTIC CAPACITOR PAPERS
VDE 0311-31 : 1988 CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - SPECIFICATIONS; GENERAL PURPOSE ELECTRICAL PAPERS
VDE 0311-32 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES - SPECIFICATIONS; CAPACITOR PAPERS
DIN VDE 0311-35 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; SPECIAL PAPER
DIN VDE 0311-33 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; CRPE PAPERS
VDE 0311-33 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES - SPECIFICATIONS; CREPE PAPERS
ISO 15754:2009 Paper and board Determination of z-directional tensile strength
17/30345789 DC : 0 BS EN 648 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD
BS ISO 5636-5:2013 Paper and board. Determination of air permeance (medium range) Gurley method
BS ISO 2493-1:2010 Paper and board. Determination of bending resistance Constant rate of deflection
DIN EN ISO 535 E : 2014 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014)
DIN EN ISO 12625-16 E : 2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015)
ISO 8254-3:2016 Paper and board Measurement of specular gloss Part 3: 20 degree gloss with a converging beam, TAPPI method
DIN ISO 8784-1 E : 2016 PULP, PAPER AND BOARD - MICROBIOLOGICAL EXAMINATION - PART 1: ENUMERATION OF BACTERIA AND BACTERIAL SPORES BASED ON DISINTEGRATION (ISO 8784-1:2014)
DIN EN ISO 1974:2012-09 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
UNI ISO 2471 : 2009 PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD
04/30101211 DC : DRAFT APR 2004 ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS
16/30330102 DC : 0 BS ISO 16762 - GRAPHIC TECHNOLOGY - POST PRESS - GENERAL REQUIREMENTS FOR TRANSFER, HANDLING AND STORAGE
I.S. EN ISO 12625-11:2012 TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012)
13/30272957 DC : 0 BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY
BS EN 16453:2014 Pulp, paper and paperboard. Determination of phthalates in extracts from paper and paperboard
BS ISO 5636-6:2015 Paper and board. Determination of air permeance (medium range) Oken method
BS ISO 2759 : 2001 AMD 14673 BOARD - DETERMINATION OF BURSTING STRENGTH
BS 4415-2:1986 Determination of the tensile properties of paper and board Constant rate of elongation method
BS 2924-2:1983 Aqueous extracts of paper, board and pulp Method for determination of conductivity
UNE-ISO 5636-5:2015 Paper and board. Determination of air permeance (medium range). Part 5: Gurley method
04/30094399 DC : DRAFT JUL 2004 ISO 9073-14 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 14: WETBACK
ISO 16532-2:2007 Paper and board Determination of grease resistance Part 2: Surface repellency test
ISO 2471:2008 Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method
11/30216364 DC : 0 BS EN ISO 1974 - PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD)
BS 6388-3:1987 Accelerated ageing of paper and board Method for moist heat treatment at 80°C and 65% relative humidity
ISO 3034:2011 Corrugated fibreboard — Determination of single sheet thickness
DIN EN ISO 9073-15:2008-08 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
DIN EN ISO 638 E : 2009 PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD
BS EN ISO 12625-15:2015 Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant
DIN EN ISO 11607-1:2014-11 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014)
PD ISO/TS 17958:2013 Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
11/30196205 DC : 0 BS ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR (DIFFUSE REFLECTANCE FACTOR)
UNI EN 15519 : 2008 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT
UNI EN ISO 12625-12 : 2010 TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY
ISO 12192:2011 Paper and board — Determination of compressive strength — Ring crush method
NF ISO 3034 : 2011 CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS
UNI ISO 6587 : 2009 PAPER, BOARD AND PULPS - DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACTS
BS ISO 5631-2:2015 Paper and board. Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10°)
BS ISO 9197:2006 Paper and board. Determination of water-soluble chlorides
11/30253307 DC : 0 BS ISO 6588-2 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION
BS ISO 6588-1:2012 Paper, board and pulps. Determination of pH of aqueous extracts Cold extraction
ISO 777:2005 Paper, board and pulp Determination of acid-soluble calcium
08/30130536 DC : DRAFT MAR 2008 BS ISO 2470-1 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS)
17/30351720 DC : 0 BS EN ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES
10/30204991 DC : 0 BS ISO 534 - PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME
15/30323163 DC : 0 BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
BS ISO 15359:1999 Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method
BS EN ISO 638:2008 Paper, board and pulps. Determination of dry matter content. Oven-drying method
03/309344 DC : DRAFT JUNE 2003 ISO 1830 - PAPER, BOARD AND PULPS - DETERMINATION OF MANGANESE
DIN ISO 11476 E : 2017 PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) (ISO 11476:2016)
07/30130542 DC : 0 ISO 2471 - PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD
15/30323957 DC : 0 BS EN ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE
BS ISO 2493-2:2011 Paper and board. Determination of bending resistance Taber-type tester
12/30213199 DC : 0 BS ISO 5636-3 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD
09/30190545 DC : 0 BS ISO 2493-1 - PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION
BS ISO 22891:2013 Paper. Determination of transmittance by diffuse reflectance measurement
ISO 8787:1986 Paper and board — Determination of capillary rise — Klemm method
CSA ISO/IEC 15457-3 : 2009 : R2014 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
ISO 15397:2014 Graphic technology Communication of graphic paper properties
BS ISO 15397:2014 Graphic technology. Communication of graphic paper properties
03/309339 DC : DRAFT JUNE 2003 ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD
BS ISO 4046-5:2016 Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board
DIN ISO 5630-6:2016-10 (Draft) PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009)
UNE-EN ISO 3035:2012 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
BS ISO 1830:2005 Paper, board and pulps. Determination of acid-soluble manganese
07/30130545 DC : 0 BS ISO 8254-1 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
14/30304809 DC : 0 BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
BS 7304-2(1990) : AMD 7009 METHODS OF TEST FOR NON-WOVENS - DETERMINATION OF THICKNESS
08/30183287 DC : DRAFT JUNE 2008 BS ISO 12625-12 - TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY
BS ISO 10775:2013 Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method
BS ISO 19594:2017 Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page-pull test working upwards
BS ISO 5630-7:2014 Paper and board. Accelerated ageing Exposure to light
10/30196197 DC : 0 BS ISO 2493-2 - PAPER AND BOARD - DETERMINATION OF RESISTANCE TO BENDING - PART 2:TABER-TYPE TESTER
ISO 20494:2017 Paper — Requirements for stability for general graphic applications
BIS IS/ISO 2470-1 : 2009 PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS)
08/30175646 DC : DRAFT MAR 2008 BS EN 1230-2 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT)
BS ISO 3039:2010 Corrugated fibreboard. Determination of grammage of the component papers after separation
BS EN ISO 11607-2 : 2006 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES
BS ISO 22414:2004 Paper. Cut-size office paper. Measurement of edge quality
ISO 1762:2015 Paper, board and pulps Determination of residue (ash) on ignition at 525 degrees C
12/30196194 DC : 0 BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD
ISO 1924-1:1992 Paper and board Determination of tensile properties Part 1: Constant rate of loading method
UNE-ISO 5631-2:2015 Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º)
UNE-ISO 3039:2013 Corrugated fibreboard. Determination of the grammage of the component papers after separation
I.S. EN ISO 9073-5:2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
ISO 5631:2000 Paper and board Determination of colour (C/2 degrees) Diffuse reflectance method
ISO 5630-5:2008 Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C
INCITS/ISO/IEC 15457-3 : 2002 : R2007 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
ISO 11556:2005 Paper and board — Determination of curl using a single vertically suspended test piece
PREN ISO 3037 : DRAFT 2013 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO/FDIS 3037:2013)
DIN ISO 15754:2010-04 Paper and board - Determination of z-directional tensile strength (ISO 15754:2009)
UNE-ISO 8784-1:2016 Pulp, paper and board. Microbiological examination. Part 1: Enumeration of bacteria and bacterial spores based on disintegration
ISO 5630-7:2014 Paper and board — Accelerated ageing — Part 7: Exposure to light
UNI EN ISO 1974 : 2012 PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD
ONORM EN ISO 12625-11 : 2013 TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012)
AAMI ISO 11607-2 : 2006 : R2010 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES
BS EN ISO 9073-18:2008 Textiles. Test methods for nonwovens Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
17/30348279 DC : 0 BS EN 1104 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS
I.S. EN 648:2006 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD
ISO 16260:2016 Paper and board — Determination of internal bond strength
ISO 5631-3:2015 Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)
ISO 22754:2008 Pulp and paper — Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
ISO 2493-1:2010 Paper and board Determination of bending resistance Part 1: Constant rate of deflection
ISO 5636-4:2013 Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method
ISO 11480:2017 Pulp, paper and board — Determination of total chlorine and organically bound chlorine
ISO 11108:1996 Information and documentation — Archival paper — Requirements for permanence and durability
BS ISO 2470-1:2016 Paper, board and pulps. Measurement of diffuse blue reflectance factor Indoor daylight conditions (ISO brightness)
ISO 9197:2016 Paper, board and pulps Determination of water-soluble chlorides
DIN EN 648:2006-12 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD
UNI EN ISO 535 : 2014 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD
CEI EN 60819-2 : 2002 NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
ISO 17812:2007 Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper
BS ISO 8254-3:2016 Paper and board. Measurement of specular gloss 20° gloss with a converging beam, TAPPI method
ISO 16532-1:2008 Paper and board — Determination of grease resistance — Part 1: Permeability test
CEI EN 60819-3-3 : 2012 NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED ARAMID (AROMATIC POLYAMIDE) PAPERS
UNE-EN ISO 287:2018 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)
ISO 14968:1999 Paper and board Cut-size office paper Measurement of curl in a pack of sheets
BS ISO 12830:2011 Paper, board and pulps. Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
ISO 287:2017 Paper and board — Determination of moisture content of a lot — Oven-drying method
UNI ISO 2470-2 : 2010 PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS)
NF EN ISO 3035 : 2011 CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE
ISO 6588-2:2012 Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction
BS EN ISO 11607-1:2017 Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems
ISO 5631-1:2015 Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees)
ISO 2470-1:2016 Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)
DIN EN ISO 536:2012-11 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012)
DIN EN ISO 7263:2011-05 CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING
DIN EN 259-1:2001-12 WALL COVERINGS IN ROLL FORM - HEAVY DUTY WALLCOVERINGS - PART 1: SPECIFICATIONS
DIN EN ISO 9706:2010-02 Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994)
UNE-EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
BS EN 259:1997 Wallcoverings in roll form. Specification for heavy duty wallcoverings
BS EN 20534:1993 Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board
BS EN 15519:2007 Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract
BS EN ISO 12625-8:2010 Tissue paper and tissue products Water-absorption time and water-absorption capacity, basket-immersion test method
UNE-EN 16640:2017 Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method
ISO 15318:1999 Pulp, paper and board Determination of 7 specified polychlorinated biphenyls (PCB)
BS EN 12281:2002 Printing and business paper. Requirements for copy paper for dry toner imaging processes
UNE-EN ISO 12625-8:2011 Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010)
DIN EN ISO 536 E : 2012 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012)
EN ISO 8254-2:2016 Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
EN ISO 9073-5 : 2008 Textiles - Test methods for nonwovens - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO 9073-5:2008)
EN ISO 15318 : 1999 Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999)
EN ISO 15320:2011 Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011)
UNI EN 1230-1 : 2009 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR
UNI EN ISO 9073-9 : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT
ENV 12625-2 : DRAFT 1999 TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING
UNI EN ISO 7263 : 2011 CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING
UNI EN ISO 12625-8 : 2011 TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER- ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD
UNI EN ISO 12625-7 : 2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT)
UNI EN ISO 1924-2 : 2009 PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN)
UNI EN ISO 2758 : 2014 PAPER - DETERMINATION OF BURSTING STRENGTH
UNI EN 1230-2 : 2009 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT)
UNI EN ISO 15320 : 2011 PULP, PAPER AND BOARD - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT
UNI EN ISO 8254-1 : 2009 PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
UNI EN ISO 534 : 2012 PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME
UNI EN ISO 3037 : 2013 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD)
UNI EN ISO 2759 : 2014 BOARD - DETERMINATION OF BURSTING STRENGTH
UNI EN ISO 12625-3 : 2014 TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK
UNI EN ISO 12625-1 : 2011 TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS
03/309373 DC : DRAFT JUNE 2003 ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY
UNE-ISO 9416:2011 Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
CSA ISO 11607-1 : 2016 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS
UNI EN ISO 9073-18 : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
UNI ISO 5636-4 : 2014 PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD
DIN ISO 9961:1994-03 DRAUGHTING MEDIA FOR TECHNICAL DRAWINGS - NATURAL TRACING PAPER
BS ISO 17812:2007 Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper
BS ISO 18522:2016 Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles
DIN ISO 3781:2012-07 Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011)
17/30357546 DC : 0 BS EN ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS
DIN VDE 0311-20 : 1988 CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; METHODS OF TEST
BS ISO 6588-2:2012 Paper, board and pulps. Determination of pH of aqueous extracts Hot extraction
16/30325731 DC : 0 BS ISO 11480 - PULP, PAPER AND BOARD - DETERMINATION OF TOTAL CHLORINE AND ORGANICALLY BOUND CHLORINE
ISO 11607-2:2006 Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes
06/30145155 DC : DRAFT JAN 2006 ISO 16532-2 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 2: SURFACE REPELLENCY TEST
BS ISO 2758 : 2001 AMD 14672 PAPER - DETERMINATION OF BURSTING STRENGTH
13/30277424 DC : 0 BS EN ISO 3037 - CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD)
07/30140460 DC : 0 BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY)
UNI ISO 5636-3 : 2014 PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD
03/306708 DC : DRAFT APR 2003 ISO 15994 - GRAPHIC TECHNOLOGY - TESTING OF PRINTS AND PRINTING PAPER - DETERMINATION OF THE VISUAL GLOSS NUMBER
11/30239244 DC : 0 BS EN ISO 12625-7 - TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR
04/30118282 DC : DRAFT AUG 2004 EN ISO 12625-8 - TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER ABSORPTION TIME AND RESIDUAL WATER ABSORPTION CAPACITY, MANUAL AND AUTOMATED BASKET IMMERSION TEST METHOD
BS ISO 9073-11:2002 Textiles. Test methods for nonwovens Run-off
DIN EN ISO 12625-16:2015-05 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
BS ISO 15754:2009 Paper and board. Determination of z-directional tensile strength
BS ISO 5630-5:2008 Paper and board. Accelerated ageing Exposure to elevated temperature at 100 °C
BS ISO 16763:2016 Graphic technology. Post-press. Requirements for bound products
I.S. EN ISO 15318:2000 PULP, PAPER AND BOARD - DETERMINATION OF 7 SPECIFIED POLYCHLORINATED BIPHENYLS (PCB)
DIN EN ISO 9073-18 E : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
07/30165293 DC : 0 BS EN ISO 7263 - CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING
DIN EN ISO 12625-12:2010-05 Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010)
10/30205404 DC : 0 BS ISO 5628 - PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS
DIN ISO 5630-5:2016-10 (Draft) PAPER AND BOARD - ACCELERATED AGEING - PART 5: EXPOSURE TO ELEVATED TEMPERATURE AT 100 DEGREES C (ISO 5630-5:2008)
BS ISO 5631-1:2015 Paper and board. Determination of colour by diffuse reflectance Indoor daylight conditions (C/2°)
13/30247449 DC : 0 BS ISO 16945 - CORRUGATING MEDIUM - DETERMINATION OF THE EDGE CRUSH RESISTANCE AFTER LABORATORY FLUTING
13/30283973 DC : 0 BS EN ISO 12625-15 - TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT
DIN ISO 5630-6 E : 2017 PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009)
CEI EN 60641-2 : 2005 PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
07/30167166 DC : 0 BS EN ISO 287 - PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT-OVEN-DRYING METHOD
15/30311310 DC : 0 BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 DEGREES)
BS EN ISO 535:2014 Paper and board. Determination of water absorptiveness. Cobb method
01/203394 DC : DRAFT MAY 2001 IEC 60641-2 - PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BIS IS 15891-9 : 2012 TEXTILES - TEST METHODS FOR NON-WOVENS - PART 9: DETERMINATION OF DRAPABILITY INCLUDING COEFFICIENT
DIN ISO 5630-4:2016-10 (Draft) PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986)
12/30196191 DC : 0 BS ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD
DIN EN 16453 E : 2014 PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD
15/30311307 DC : 0 BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES)
BS ISO 1762:2015 Paper, board and pulps. Determination of residue (ash) on ignition at 525 °C
16/30328581 DC : 0 BS ISO 19594 - GRAPHIC TECHNOLOGY - TEST METHODS FOR THE DETERMINATION OF THE BINDING STRENGTH FOR PERFECT BOUND PRODUCTS - PAGE PULL TEST WORKING UPWARDS
DIN EN ISO 12625-15 E : 2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015)
01/121198 DC : DRAFT MAR 2001 BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREES GLOSS
BS EN 16785-1:2015 Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis
ISO 8791-3:2017 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
BS ISO/IEC 15457-3:2008 Identification cards. Thin flexible cards Test methods
BS ISO 5631-3:2015 Paper and board. Determination of colour by diffuse reflectance Indoor illumination conditions (D50/2°)
DIN EN 16785-1 E : 2016 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
13/30286354 DC : 0 BS EN ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH
08/30175643 DC : DRAFT MAR 2008 BS EN 1230-1 - PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 1: ODOUR
15/30326869 DC : 0 BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
03/306710 DC : DRAFT APR 2003 ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD
UNE-ISO 2493-2:2014 Paper and board. Determination of resistance to bending. Part 2: Taber-type tester
NF ISO 5628 : 2012 PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS
BS EN 60819-3-3:2011 Non-cellulosic papers for electrical purposes Specifications for individual materials. Sheet 3: Unifilled aramid (aromatic polyamide) papers
UNE-ISO 16945:2015 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
UNI ISO 17812 : 2009 PAPER, BOARD AND PULPS - DETERMINATION OF TOTAL MAGNESIUM, TOTAL CALCIUM, TOTAL MANGANESE, TOTAL IRON AND TOTAL COPPER
UNE-EN ISO 12625-11:2013 Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012)
UNI CEN/TS 16640 : 2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
UNI ISO 6588-2 : 2013 PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION
ASTM D 585 : 1997 : R2002 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
DIN EN ISO 9073-18:2008-08 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)
DIN ISO 5630-7:2016-10 (Draft) PAPER AND BOARD - ACCELERATED AGEING - PART 7: EXPOSURE TO LIGHT (ISO 5630-7:2014)
03/309336 DC : DRAFT JUNE 2003 ISO 22414 - PAPER - CUT-SIZE OFFICE PAPER - MEASUREMENT OF EDGE QUALITY
BS ISO 5629:2017 Paper and board. Determination of bending stiffness. Resonance method
INCITS/ISO/IEC 15457-3 : 2002 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
CSA ISO 11607-2 : 2016 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES
ISO 1830:2005 Paper, board and pulps Determination of acid-soluble manganese
PREN 17163 : DRAFT 2017 PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD
I.S. EN ISO 11607-1:2017 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006, INCLUDING AMD 1:2014)
ISO 2470-2:2008 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness)
ONORM EN ISO 638 : 2009 PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD
ISO/TS 20460:2015 Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges
BS 1248-1:1990 Wallcoverings in roll form Terms and symbols
PREN 233 : DRAFT 2016 WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR FINISHED WALLPAPERS, WALL VINYLS AND PLASTICS WALLCOVERINGS
BS EN ISO 11607-1 : 2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS
EN 1104:2005 Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents
ISO 4046-5:2002 Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board
UNE-EN ISO 11607-2:2017 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006, including Amd 1:2014)
EN 1230-2:2009 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
UNI EN ISO 11607-1 : 2014 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS
ISO 11607-1:2006 Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems
ISO 12625-1:2011 Tissue paper and tissue products Part 1: General guidance on terms
ISO 16762:2016 Graphic technology Post-press General requirements for transfer, handling and storage
ISO 779:2005 Paper, board and pulp Determination of acid-soluble iron
ISO 5636-6:2015 Paper and board Determination of air permeance (medium range) Part 6: Oken method
ISO 5631-2:2015 Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)
I.S. EN 1230-2:2009 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - SENSORY ANALYSIS - PART 2: OFF-FLAVOUR (TAINT)
ISO/IEC 15457-3:2008 Identification cards — Thin flexible cards — Part 3: Test methods
EN 234:1989/AC:1997 WALLCOVERINGS IN ROLL FORM - SPECIFICATION FOR WALLCOVERINGS FOR SUBSEQUENT DECORATION
ISO 7263:2011 Corrugating medium Determination of the flat crush resistance after laboratory fluting
EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012)
BS EN ISO 11607-1:2020 Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems
DIN EN ISO 12625-9:2015-05 TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015)
DIN EN ISO 3037:2013-12 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
DIN EN ISO 2759:2014-10 Board - Determination of bursting strength (ISO 2759:2014)
DIN EN ISO 12625-8:2011-04 Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010)
DIN EN ISO 12625-3:2014-09 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014)
DIN EN ISO 2758:2014-12 PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014)
DIN EN ISO 12625-7:2014-08 Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014)
BS EN 12283:2002 Printing and business paper. Determination of toner adhesion
ISO 1924-2:2008 Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
UNE-EN ISO 12625-4:2017 Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016)
BS EN ISO 9073-13:2007 Textiles. Test methods for nonwovens Repeated liquid strike-through time
BS EN ISO 3037:2013 Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS EN ISO 12625-3:2014 Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk
BS EN ISO 536:2012 Paper and board. Determination of grammage
BS EN 29073-3:1992 Methods of test for nonwovens Methods of test for nonwovens. Determination of tensile strength and elongation
ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method
BS EN ISO 12625-9:2005 Tissue paper and tissue products Determination of ball burst strength
ISO 12625-12:2010 Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency
ISO 9073-11:2002 Textiles — Test methods for nonwovens — Part 11: Run-off
ISO 12625-8:2010 Tissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method
ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method
BS EN ISO 15320:2011 Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract
UNI EN ISO 536 : 2012 PAPER AND BOARD - DETERMINATION OF GRAMMAGE
UNE-ISO 2493-1:2014 Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection
BS EN ISO 534:2011 Paper and board. Determination of thickness, density and specific volume
BS EN ISO 12625-6:2016 Tissue paper and tissue products Determination of grammage
BS EN 14086:2003 Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method
BS EN ISO 9706:2000 Information and documentation. Paper for documents. Requirements for permanence
UNE-EN 233:2017 Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings
UNE-EN ISO 12625-5:2017 Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
UNE-EN ISO 15320:2012 Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011)
ISO 9862:2005 Geosynthetics — Sampling and preparation of test specimens
BS EN ISO 9073-9:2008 Textiles. Test methods for nonwovens Determination of drapability including drape coefficient
ISO 9706:1994 Information and documentation — Paper for documents — Requirements for permanence
ISO 12625-16:2015 Tissue paper and tissue products Part 16: Determination of optical properties Opacity (paper backing) Diffuse reflectance method
IEC 60819-2:2001 Non-cellulosic papers for electrical purposes - Part 2: Methods of test
BS EN ISO 7263:2011 Corrugating medium. Determination of the flat crush resistance after laboratory fluting
ISO 9073-9:2008 Textiles Test methods for nonwovens Part 9: Determination of drapability including drape coefficient
ISO 8254-1:2009 Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method
UNE-EN 1230-1:2010 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour
UNE-EN ISO 534:2012 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
UNE-EN ISO 12625-3:2015 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
BS EN 1230-1:2001 Paper and board intended for contact with foodstuffs. Sensory analysis Odour
ISO 15755:1999 Paper and board Estimation of contraries
UNE-EN ISO 12625-9:2015 Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)
ISO 9073-7:1995 Textiles — Test methods for nonwovens — Part 7: Determination of bending length
ISO 9073-8:1995 Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine)
BS EN 1230-2:2009 Paper and board intended to come into contact with foodstuffs. Sensory analysis Off-flavour (taint)
BS EN ISO 12625-7:2014 Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight)
ISO 9073-14:2006 Textiles — Test methods for nonwovens — Part 14: Coverstock wetback
ISO 8254-2:2016 Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method
ISO 15320:2011 Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract
UNE-EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
BS EN ISO 9073-8:1998 Textiles. Test methods for nonwovens Determination of liquid strike-through time (simulated urine)
ISO 2758:2014 Paper Determination of bursting strength
ISO 638:2008 Paper, board and pulps Determination of dry matter content Oven-drying method
BS EN ISO 1924-2:2008 Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min)
ISO 536:2012 Paper and board Determination of grammage
ISO 12625-9:2015 Tissue paper and tissue products Part 9: Determination of ball burst strength
UNE-EN ISO 12625-6:2017 Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
ISO 9073-18:2007 Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
UNE-EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014)
UNE-ISO 3781:2015 Paper and board - Determination of tensile strength after inmersion in water
ISO 12625-4:2016 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
ONORM EN ISO 536 : 2013 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012)
ISO 9073-15:2007 Textiles Test methods for nonwovens Part 15: Determination of air permeability
BS EN ISO 9073-14:2007 Textiles. Test methods for nonwovens Coverstock wetback
BS EN 14719:2005 Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction
ISO 9073-13:2006 Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time
ISO 6588:1981 Paper, board and pulps Determination of pH of aqueous extracts
EN ISO 535:2014 Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014)
EN 14719:2005 Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction
EN ISO 9073-13:2007 Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006)
EN 233:1999 Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings
EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
EN ISO 1974:2012 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
EN 16785-1:2015 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
EN ISO 12625-16:2015 Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
EN ISO 9073-15:2008 Textiles - Test methods for nonwovens - Part 15: Determination of air permeability (ISO 9073-15:2007)
EN ISO 534:2011 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
EN ISO 9073-6:2003 Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000)
EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
EN 29073-3:1992 Textiles - Test methods for nonwovens - Part 3: Determination of tensile strength and elongation
EN ISO 3035:2011 Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
EN ISO 2759:2014 Board - Determination of bursting strength (ISO 2759:2014)
EN ISO 9073-9:2008 Textiles - Test methods for nonwovens - Part 9: Determination of drapability including drape coefficient (ISO 9073-9:2008)
EN 14086:2003 Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method
EN ISO 9073-2 : 1996 TEXTILES - TEST METHODS FOR NONWOVENS - PART 2: DETERMINATION OF THICKNESS
EN ISO 12625-8:2010 Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010)
EN ISO 12625-9:2015 Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)
EN ISO 12625-12:2010 Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010)
EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)
EN ISO 9073-14:2007 Textiles - Test methods for nonwovens - Part 14: Coverstock wetback (ISO 9073-14:2006)
EN 27023 : 1992 PACKAGING - SACKS - METHOD OF SAMPLING EMPTY SACKS FOR TESTING
EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015)
EN ISO 9073-7:1998 Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995)
EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
EN ISO 1924-2:2008 Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008)
EN ISO 3037:2013 Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)
EN 259:1991/AC:1997 WALL COVERINGS IN ROLL FORM - SPECIFICATION FOR HEAVY DUTY WALL COVERINGS
EN ISO 9706:1998 Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994)
EN ISO 15755:1999 Paper and board - Estimation of contraries (ISO 15755:1999)
EN ISO 8254-1:2009 Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)
EN ISO 12625-1:2011 Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011)
EN ISO 9073-18:2008 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007)
EN 753-3 : 1999 IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS
EN 29073-1:1992 Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area
EN ISO 2758:2014 Paper - Determination of bursting strength (ISO 2758:2014)
EN 16453:2014 Pulp, paper and paperboard - Determination of phthalates in extracts from paper and paperboard
EN 647:1993 Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract
EN ISO 9073-8:1998 Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995)
EN ISO 9073-11:2004 Textiles - Test methods for nonwovens - Part 11: Run-off (ISO 9073-11:2002)
ISO 778:2005 Paper, board and pulp Determination of acid-soluble copper
ISO 10775:2013 Paper, board and pulps Determination of cadmium content Atomic absorption spectrometric method
BS ISO 9895:2008 Paper and board. Compressive strength. Short-span test
BS ISO 779:2005 Paper, board and pulp. Determination of acid-soluble iron
UNE-ISO 6588-2:2013 Paper, board and pulps. Determination of pH of aqueous extracts. Part 2: Hot extraction
UNE-EN ISO 12625-12:2010 Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010)
UNE-ISO 2470-1:2012 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
03/310720 DC : DRAFT JUNE 2003 ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE
UNI EN ISO 638 : 2009 PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD
DIN EN 16640 E : 2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
ISO 10716:1994 Paper and board Determination of alkali reserve
BS ISO 3034:2011 Corrugated fibreboard. Determination of single sheet thickness
17/30323191 DC : DRAFT JAN 2017 BS ISO 20494 - PAPER - REQUIREMENTS FOR STABILITY FOR GENERAL, GRAPHIC APPLICATIONS
NF ISO 12192 : 2011 PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD
07/30140452 DC : 0 BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES)
BS ISO 22754:2008 Pulp and paper. Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
I.S. EN ISO 9862:2005 GEOSYNTHETICS - SAMPLING AND PREPARATION OF TEST SPECIMENS
BS EN ISO 287:2017 Paper and board. Determination of moisture content of a lot. Oven-drying method
PREN 1104 : DRAFT 2017 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE TRANSFER OF ANTIMICROBIAL CONSTITUENTS
DIN EN 16785-1:2016-03 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
14/30219261 DC : 0 BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD
ISO 8784-1:2014 Pulp, paper and board Microbiological examination Part 1: Enumeration of bacteria and bacterial spores based on disintegration
06/30099592 DC : DRAFT JAN 2006 ISO 17812 - PAPER, BOARD AND PULP - DETERMINATION OF MAGNESIUM, CALCIUM, MANGANESE, IRON AND COPPER
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
DIN ISO 5630-5 E : 2017 PAPER AND BOARD - ACCELERATED AGEING - PART 5: EXPOSURE TO ELEVATED TEMPERATURE AT 100 DEGREES C (ISO 5630-5:2008)
13/30283977 DC : 0 BS EN ISO 12625-16 - TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE FACTOR
BS ISO 1924-3:2005 Paper and board. Determination of tensile properties Constant rate of elongation method (100 mm/min)
07/30140456 DC : 0 BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 )
DIN ISO 3034:2016-08 CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011)
15/30284739 DC : 0 BS ISO 16763 - GRAPHIC TECHNOLOGY - POST PRESS - REQUIREMENTS FOR BOUND PRODUCTS
17/30353869 DC : DRAFT SEP 2017 BS EN 17163 - PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD
03/306705 DC : DRAFT APR 2003 ISO 6588-2 - PAPER, BOARD AND PULPS - DETERMINATION OF PH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION
BS ISO 11475:2017 Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight)
DIN ISO 5630-7 E : 2017 PAPER AND BOARD - ACCELERATED AGEING - PART 7: EXPOSURE TO LIGHT (ISO 5630-7:2014)
PD CEN/TS 16640:2014 Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method
BS ISO 9198:2001 Paper, board and pulp. Determination of water-soluble sulfates
06/30148429 DC : DRAFT JULY 2006 ISO 9073-17 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 17: EVALUATION OF WATER PENETRATION (SPRAY IMPACT TEST)
09/30198874 DC : DRAFT SEP 2009 BS ISO 12830 - PAPER, BOARD AND PULPS - DETERMINATION OF ACID-SOLUBLE MAGNESIUM, CALCIUM, MANGANESE, IRON, COPPER, SODIUM AND POTASSIUM
PREN ISO 12625-3 : DRAFT 2013 TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013)
BS ISO 16532-1:2008 Paper and board. Determination of grease resistance Permeability test
BS ISO 5630-6:2009 Paper and board. Accelerated ageing Exposure to atmospheric pollution (nitrogen dioxide)
ISO 5629:2017 Paper and board — Determination of bending stiffness — Resonance method
UNI EN ISO 3035 : 2012 CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE
BS ISO 2471:1998 Paper and board. Determination of opacity (paper backing). Diffuse reflectance method
BS ISO 8791-4:2007 Paper and board. Determination of roughness/smoothness (air leak methods) Print-surf method
BS ISO 10716:1994 Paper and board. Determination of alkali reserve
UNE-ISO 15359:2014 Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method
BS ISO 29681:2009 Paper, board and pulps. Determination of pH of salted water extracts
15/30302564 DC : 0 BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
13/30230645 DC : 0 BS ISO 16260 - PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH
DIN EN ISO 9073-11 E : 2005 TEXTILES - TEST METHODS FOR NONWOVENS - PART 11: RUN-OFF
BS ISO 777:2005 Paper, board and pulp. Determination of acid-soluble calcium
BS 6428:1983 Method for sampling empty sacks for testing
03/310738 DC : DRAFT JULY 2003 EN 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS
06/30154504 DC : DRAFT AUG 2006 ISO 9073-9 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 9: EVALUATION OF DRAPABILITY INCLUDING DRAPE COEFFICIENT
UNI ISO 8791-2 : 2014 PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD
BS ISO 2528:2017 Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method
08/30181295 DC : DRAFT APR 2008 BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES)
BS ISO 9706 : 94 AMD 10518 INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE
07/30122297 DC : 0 BS ISO 15754 - PAPER AND BOARD - DETERMINATION OF Z-DIRECTIONAL TENSILE STRENGTH
BS EN ISO 3035:2011 Corrugated fibreboard. Determination of flat crush resistance
BS ISO 8254-1 : 99 AMD 14259 PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1 - 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
BS ISO 536 : 1995 AMD 9309 PAPER AND BOARD - DETERMINATION OF GRAMMAGE
03/310721 DC : DRAFT JUNE 2003 ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH
01/648266 DC : DRAFT MAY 2001 ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
04/30101215 DC : DRAFT APR 2004 ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES
UNI EN ISO 9073-5 : 2009 TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE)
09/30193349 DC : DRAFT FEB 2009 BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREE (INDOOR ILLUMINATION CONDITIONS)
CSA ISO/IEC 15457-3 : 2009 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
DIN ISO 8784-1:2016-05 PULP, PAPER AND BOARD - MICROBIOLOGICAL EXAMINATION - PART 1: ENUMERATION OF BACTERIA AND BACTERIAL SPORES BASED ON DISINTEGRATION (ISO 8784-1:2014)
DIN EN ISO 9073-15 E : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
ISO 8791-2:2013 Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method
I.S. EN 16453:2014 PULP, PAPER AND PAPERBOARD - DETERMINATION OF PHTHALATES IN EXTRACTS FROM PAPER AND PAPERBOARD
UNI EN ISO 9073-15 : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY
EN ISO 287:2017 Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)
UNE-ISO 3036:2013 Board. Determination of puncture resistance.
I.S. EN ISO 287:2017 PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN-DRYING METHOD (ISO 287:2017)
I.S. EN 60641-2:2004 SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - METHODS OF TEST
ISO 2528:2017 Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
UNE-EN ISO 1974:2013 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
I.S. EN ISO 12625-16:2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015)
I.S. EN ISO 12625-15:2015 TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015)
UNI ISO 9895 : 2009 PAPER AND BOARD - COMPRESSIVE STRENGTH - SHORT-SPAN TEST
ISO 16945:2014 Corrugating medium Determination of the edge crush resistance after laboratory fluting
BS ISO 2470:1999 Paper, board and pulps. Measurement of diffuse blue reflectance factor (ISO brightness)
ONORM EN ISO 7263 : 2011 CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING
BS EN 646:2006 Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
EN 646:2006 Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board
UNI EN ISO 11607-2 : 2014 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES
BS ISO 2144:2015 Paper, board and pulps. Determination of residue (ash) on ignition at 900 °C
UNE-ISO 5631-1:2015 Paper and board. Determination of colour by diffuse reflectance. Part 1: Indoor daylight conditions (C/2º)
UNE-ISO 11475:2010 Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight)
UNE-ISO 16532-3:2017 Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers
UNE-EN ISO 12625-15:2015 Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015)
PREN 648 : DRAFT 2017 PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - DETERMINATION OF THE FASTNESS OF FLUORESCENT WHITENED PAPER AND BOARD
NF ISO 5630-6 : 2009 PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE)
I.S. EN ISO 12625-1:2011 TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS
ISO 8226-1:1994 Paper and board Measurement of hygroexpansivity Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %
I.S. ENV 12625-2:1999 TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING
ISO 5630-6:2009 Paper and board Accelerated ageing Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
I.S. EN ISO 536:2012 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012)
DIN EN 1230-1:2010-02 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour
DIN EN ISO 1924-2:2009-05 PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN)
DIN EN ISO 9862 E : 2005 GEOSYNTHETICS - SAMPLING AND PREPARATION OF TEST SPECIMENS
DIN EN ISO 9073-2:1997-02 TEXTILES - TEST METHODS FOR NONWOVENS - PART 2: DETERMINATION OF THICKNESS
DIN EN ISO 9073-13 E : 2007 TEXTILES - TEST METHODS FOR NONWOVENS - PART 13: REPEATED LIQUID STRIKE-THROUGH TIME
BS EN 13676:2001 Polymer coated paper and board intended for food contact. Detection of pinholes
IEC 60641-2:2004 Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
BS EN 20535:1994 Paper and board. Determination of water absorptiveness. Cobb method
ISO 12625-6:2016 Tissue paper and tissue products Part 6: Determination of grammage
ISO 12625-5:2016 Tissue paper and tissue products — Part 5: Determination of wet tensile strength
BS EN 233:2016 Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
BS EN 12858:1999 Paper. Printing and business paper. Requirements for continuous stationery
BS EN ISO 9073-7:1998 Textiles. Test methods for nonwovens Determination of bending length
IEC 60819-3-3:2011 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers
BS EN 753-3:1999 Identification card systems. Intersector thin flexible cards Test methods
ISO 9073-4:1997 Textiles Test methods for nonwovens Part 4: Determination of tear resistance
BS EN ISO 9073-6:2003 Textiles. Test methods for nonwovens Absorption
ISO 534:2011 Paper and board — Determination of thickness, density and specific volume
ISO 12625-15:2015 Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant
ISO 3035:2011 Corrugated fibreboard — Determination of flat crush resistance
ISO 7023:1983 Packaging Sacks Method of sampling empty sacks for testing
DIN EN 14719:2005-10 Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction
DIN ISO 5630-4:2017-03 PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986)
DIN EN ISO 9073-11:2005-03 TEXTILES - TEST METHODS FOR NONWOVENS - PART 11: RUN-OFF
DIN ISO 5630-6:2017-03 Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide) (ISO 5630-6:2009)
DIN EN ISO 15320:2011-11 Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011)
DIN EN ISO 9862:2005-05 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
DIN EN ISO 638:2009-01 Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008)
DIN EN ISO 8254-1:2009-09 PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD
DIN EN ISO 2759:2003-11 BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014)
EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
DIN EN 15519:2008-01 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
EN 60819-3-3:2011 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers
DIN ISO 8791-4:2008-05 Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2007)
DIN ISO 5630-7:2017-03 Paper and board - Accelerated ageing - Part 7: Exposure to light (ISO 5630-7:2014)
EN 60641-2:2004 Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
I.S. EN 29073-1:1993 TEXTILES - TEST METHODS FOR NONWOVENS - PART 1: DETERMINATION OF MASS PER UNIT AREA
BS 6036(1995) : 1995 AMD 9160 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD)
BS 3433(1986) : AMD 8175 METHOD FOR DETERMINATION OF MOISTURE CONTENT OF PAPER AND BOARD BY THE OVEN-DRYING METHOD
ONORM EN ISO 9073-18 : 2008 TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST
BS 4419:1980 Methods for determination of folding endurance of paper
BS 3983(1989) : AMD 7810 METHOD FOR DETERMINATION OF THICKNESS AND APPARENT BULK DENSITY OR APPARENT SHEET DENSITY OF PAPER AND BOARD
BS 4468(1990) : 90 AMD 8176 METHOD FOR DETERMINATION OF THE INTERNAL TEARING RESISTANCE OF PAPER
BS 2644(1991) : AMD 8174 METHOD FOR DETERMINATION OF WATER ABSORPTIVENESS OF PAPER AND BOARD (COBB METHOD)
BS 3432:1980 Method for determination of grammage of paper and board

ISO 2859-3:2005 Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming
AS 1301.450:2019 Methods of test for pulp and paper Compression strength of paper and board - Short span test (ISO 9895:2008, MOD)
ISO 2859-2:1985 Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
AS 1301.566:2019 Methods of test for pulp and paper Tensile strength of paper and paperboard (constant rate of elongation method, 100 mm/min) (ISO 1924-3:2005, MOD)
AS 1301.403:2019 Methods of test for pulp and paper Bursting strength of paper (ISO 2758:2014, MOD)
AS/NZS 1301.421:2020 Method of test for pulp and paper Paper, board and pulps - Determination of pH of aqueous extracts - Cold extraction
AS 1301.439:2019 Methods of test for pulp and paper Bendtsen roughness of paper and paperboard (ISO 8791-2:2013, MOD)
ISO 4046:1978 Paper, board, pulp and related terms — Vocabulary
AS 1301.437:2019 Methods of test for pulp and paper Tensile strength of wetted paper and paperboard (ISO 3781:2011, MOD)
AS 1301.438:2019 Methods of test for pulp and paper Bursting strength of board (ISO 2759:2014, MOD)
AS 1301.448:2019 Methods of test for pulp and paper Tensile strength of paper and paperboard (constant rate of elongation method, 20 mm/min) (ISO 1924-2:2008, MOD)
AS 1301.420:2019 Methods of test for pulp and paper Gurley air permeance of paper (ISO 5636-5:2013, MOD)
AS/NZS 1301.422:2020 Method of test for pulp and paper Paper, board and pulps - Determination of pH of aqueous extracts - Hot extraction

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.