ISO 21028-1:2016
Current
Current
The latest, up-to-date edition.
Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
09-20-2016
ISO 21028-1:2016 specifies the toughness requirements of metallic materials for use at a temperature below -80 C to ensure their suitability for cryogenic vessels.
ISO 21028-1:2016 is not applicable to unalloyed steels and cast materials.
| DevelopmentNote |
Supersedes ISO/DIS 21028-1. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 21028-1 E : 2017 | Identical |
| NF EN ISO 21028-1 : 2016 | Identical |
| NEN EN ISO 21028-1 : 2016 | Identical |
| NS EN ISO 21028-1 : 2016 | Identical |
| I.S. EN ISO 21028-1:2016 | Identical |
| PN EN ISO 21028-1 : 2017 | Identical |
| SN EN ISO 21028-1:2017 | Identical |
| UNI EN ISO 21028-1 : 2016 | Identical |
| SS-EN ISO 21028-1 : 2017 | Identical |
| UNE-EN ISO 21028-1:2017 | Identical |
| BS EN ISO 21028-1:2016 | Identical |
| EN ISO 21028-1:2016 | Identical |
| DIN EN ISO 21028-1:2015-03 (Draft) | Identical |
| DIN EN ISO 21028-1:2017-01 | Identical |
| NEN ISO 21028-1 : 2004 | Identical |
| BS ISO 21013-2 : 2007 | CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 2: NON-RECLOSABLE PRESSURE-RELIEF DEVICES |
| BS ISO 21013-1:2008 | Cryogenic vessels. Pressure-relief accessories for cryogenic service Reclosable pressure-relief valves |
| BS ISO 12991:2012 | Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles |
| BS ISO 16924 : 2016 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| 16/30294444 DC : 0 | BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| BS ISO 21011:2008 | Cryogenic vessels. Valves for cryogenic service |
| ISO 21011:2008 | Cryogenic vessels — Valves for cryogenic service |
| 15/30310182 DC : 0 | BS EN ISO 24490 - CRYOGENIC VESSELS - PUMPS FOR CRYOGENIC SERVICE |
| ISO 21013-2:2007 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices |
| BS ISO 20421-1:2006 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
| 04/102832 DC : DRAFT JAN 2004 | ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS |
| DIN EN 1474-2:2009-02 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| ISO 18154:2017 | Ships and marine technology — Safety valve for cargo tanks of LNG carriers — Design and testing requirements |
| 06/30154009 DC : DRAFT JULY 2006 | ISO 21013-2 - CRYOGENIC VESSELS - PRESSURE RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 2: NON RECLOSABLE PRESSURE RELIEF DEVICES |
| BIS IS/ISO 13985 : 2006 | LIQUID HYDROGEN - LAND VEHICLES FUEL TANKS |
| ISO 16924:2016 | Natural gas fuelling stations — LNG stations for fuelling vehicles |
| 06/30154011 DC : DRAFT JULY 2006 | ISO 21013-1 - CRYOGENIC VESSELS - PRESSURE RELIEF ACCESSORIES FOR - CRYOGENIC SERVICE - PART 1: RECLOSABLE PRESSURE RELIEF VALVES |
| BS EN ISO 16924:2018 | Natural gas fuelling stations. LNG stations for fuelling vehicles |
| BS ISO 20421-1:2019 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
| BS ISO 18154:2017 | Ships and marine technology. Safety valve for cargo tanks of LNG carriers. Design and testing requirements |
| 06/30158810 DC : 0 | BS EN 1474-2 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| 13/30271407 DC : DRAFT DEC 2013 | BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| 16/30313951 DC : 0 | BS ISO 18154 - SHIPS AND MARINE TECHNOLOGY - PILOT OPERATED SAFETY VALVES FOR LOW TEMPERATURE APPLICATIONS - DESIGN REQUIREMENTS |
| 04/30118080 DC : DRAFT AUG 2004 | ISO 21012 - CRYOGENIC VESSELS - HOSES |
| DIN EN ISO 24490:2016-08 | CRYOGENIC VESSELS - PUMPS FOR CRYOGENIC SERVICE (ISO 24490:2016) |
| 18/30350515 DC : 0 | BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| BS EN 1474-2:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer hoses |
| SAE AIR 6464 : 2013 | EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES |
| DIN EN ISO 24490 E : 2016 | CRYOGENIC VESSELS - PUMPS FOR CRYOGENIC SERVICE (ISO 24490:2016) |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| I.S. EN 1474-2:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| UNI EN 1474-2 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| ISO 12991:2012 | Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles |
| ISO 20421-1:2006 | Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 1474-2:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| 11/30194638 DC : 0 | BS ISO 12991 - LIQUEFIED NATURAL GAS (LNG) - TRANSPORTABLE TANKS FOR USE ON BOARD VEHICLES |
| 10/30197274 DC : 0 | BS ISO 21013-4 - CRYOGENIC VESSELS - PILOT OPERATED PRESSURE RELIEF DEVICES - PART 4: PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE |
| BS ISO 21012:2006 | Cryogenic vessels. Hoses |
| BS EN ISO 24490:2016 | Cryogenic vessels. Pumps for cryogenic service |
| 06/30153331 DC : DRAFT JULY 2006 | BS ISO 21009-1 - CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| ISO 21013-4:2012 | Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service |
| I.S. EN ISO 16924:2018 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016) |
| ISO 13985:2006 | Liquid hydrogen — Land vehicle fuel tanks |
| BS ISO 21013-4:2012 | Cryogenic vessels. Pilot operated pressure-relief devices Pressure-relief accessories for cryogenic service |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| ISO 24490:2016 | Cryogenic vessels Pumps for cryogenic service |
| ISO 21013-1:2008 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves |
| EN ISO 16924:2018 | Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016) |
| I.S. EN ISO 24490:2016 | CRYOGENIC VESSELS - PUMPS FOR CRYOGENIC SERVICE (ISO 24490:2016) |
| 04/30118084 DC : DRAFT AUG 2004 | ISO 21011 - CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
| UNE-EN ISO 24490:2016 | Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016) |
| BS ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests |
| BS ISO 13985:2006 | Liquid hydrogen. Land vehicle fuel tanks |
| ISO 21012:2018 | Cryogenic vessels Hoses |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| EN ISO 24490:2016 | Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016) |
| EN 1653:1997/A1:2000 | COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 1981:2003 | Copper and copper alloys - Master alloys |
| ISO 6361-3:2014 | Wrought aluminium and aluminium alloys Sheets, strips and plates Part 3: Strips: Tolerances on shape and dimensions |
| ISO 6361-4:2014 | Wrought aluminium and aluminium alloys Sheets, strips and plates Part 4: Sheets and plates: Tolerances on shape and dimensions |
| 2014/68/EU : 2014 COR 1 2015 | DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE |
| ASME PV CODE 2B : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - NONFERROUS MATERIAL SPECIFICATIONS |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| ISO 20421-1:2006 | Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing |
| ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| EN 1652:1997/AC:2003 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.