ISO 23146:2012
Current
Current
The latest, up-to-date edition.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
12-13-2012
ISO 23146:2012 specifies a method for the determination of the fracture toughness of advanced technical ceramics. The procedure makes use of single-edge V-notched bars, which are loaded in four-point bending until failure. It is applicable to monolithic ceramics with a grain size or major microstructural feature size larger than about 1 µm.
The use of ISO 23146:2012 for yttria tetragonal zirconia polycrystal material (Y-TZP) is not recommended. The method might also be unsuitable for some other very tough or soft ceramics in which a sharp crack does not form at the root of the V-notch.
| Committee |
ISO/TC 206
|
| DevelopmentNote |
Supersedes ISO/DIS 23146. (12/2012)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 23146 E : 2016 | Identical |
| NF EN ISO 23146 : 2016 | Identical |
| NBN EN ISO 23146 : 2016 | Identical |
| NEN EN ISO 23146 : 2016 | Identical |
| NS EN ISO 23146 : 2016 | Identical |
| I.S. EN ISO 23146:2016 | Identical |
| PN EN ISO 23146 : 2016 | Identical |
| SN EN ISO 23146:2016 | Identical |
| UNI EN ISO 23146 : 2016 | Identical |
| BS EN ISO 23146:2016 | Identical |
| EN ISO 23146:2016 | Identical |
| DIN EN ISO 23146:2015-10 (Draft) | Identical |
| UNE-EN ISO 23146:2016 | Identical |
| DIN EN ISO 23146:2016-11 | Identical |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| EN ISO 6872:2015/A1:2018 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015/AMD 1:2018) |
| BS ISO 6474-1:2010 | Implants for surgery. Ceramic materials Ceramic materials based on high purity alumina |
| BS ISO 20507:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Vocabulary |
| BS EN ISO 6872 : 2015 | DENTISTRY - CERAMIC MATERIALS |
| 13/30252145 DC : 0 | BS ISO 20507 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - VOCABULARY |
| 16/30332223 DC : 0 | BS ISO 6474-1 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 1: CERAMIC MATERIALS BASED ON HIGH PURITY ALUMINA |
| 17/30361518 DC : 0 | BS ISO 6474-2 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 2: COMPOSITE MATERIALS BASED ON A HIGH-PURITY ALUMINA MATRIX WITH ZIRCONIA REINFORCEMENT |
| BS EN ISO 17296-3:2016 | Additive manufacturing. General principles Main characteristics and corresponding test methods |
| DIN EN ISO 6872:2015-11 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015) |
| ISO 6872:2015 | Dentistry Ceramic materials |
| 10/30196848 DC : 0 | BS ISO 6474-2 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 2: COMPOSITE MATERIALS BASED ON A HIGH PURITY ALUMINA MATRIX WITH ZIRCONIA REINFORCEMENT |
| BS ISO 17296-3 : 2014 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
| BS ISO 6474-2:2012 | Implants for surgery. Ceramic materials Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| ISO 6474-1:2010 | Implants for surgery Ceramic materials Part 1: Ceramic materials based on high purity alumina |
| 17/30337243 DC : DRAFT SEP 2017 | BS ISO 21113 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMIC THIN PLATES AT ROOM TEMPERATURE |
| 13/30279967 DC : 0 | BS EN ISO 6872 - DENTISTRY - CERAMIC MATERIALS |
| ISO 6474-2:2012 | Implants for surgery Ceramic materials Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| ISO 20507:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Vocabulary |
| ISO 17296-3:2014 | Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
| EN ISO 17296-3:2016 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| PD ISO/TS 18684:2015 | Timekeeping instruments. Watch external parts made of hard materials. General requirements and test methods |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| I.S. EN ISO 17296-3:2016 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
| ISO/TS 18684:2015 | Timekeeping instruments Watch external parts made of hard materials General requirements and test methods |
| I.S. EN ISO 6872:2015 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015) |
| UNE-EN ISO 17296-3:2017 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| ISO 14704:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at room temperature |
| ISO 18756:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
| EN 623-3 : 2001 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - DETERMINATION OF GRAIN SIZE AND SIZE DISTRIBUTION (CHARACTERIZED BY THE LINEAR INTERCEPT METHOD) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
| ISO 24370:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
US$111.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.