ISO 2719:2016
Current
The latest, up-to-date edition.
Determination of flash point — Pensky-Martens closed cup method
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
06-16-2016
ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
CAUTION - For certain mixtures no flash point, as defined, is observed; instead a significant enlargement of the test flame (not halo effect) and a change in colour of the test flame from blue to yellowish-orange can occur. Continued heating can result in significant burning of vapours outside the test cup, and can be a potential fire hazard.
NOTE 1 Although, technically, kerosene with a flash point above 40 °C can be tested using this International Standard, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592[2].
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of Procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of liquids with solids, liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751[13].
ISO 2719:2016 is not applicable to water-borne paints and varnishes.
NOTE 2 Water-borne paints and varnishes can be tested using ISO 3679[3]. Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.
Committee |
ISO/TC 28
|
DevelopmentNote |
Supersedes ISO/DIS 2719. (06/2016) NEW CHILD AMD 1 2021 IS NOW ADDED
|
DocumentType |
Standard
|
Pages |
22
|
ProductNote |
NEW CHILD AMD 1 2021 IS NOW ADDED
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
14/30301257 DC : 0 | BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
04/101637 DC : DRAFT JAN 2004 | ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
17/30359196 DC : DRAFT SEP 2017 | BS EN 16709 AMD 1 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
PD CEN/TR 16389:2017 | Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination |
BIS IS 546 : 2014 | MUSTARD OIL - SPECIFICATION |
ISO 9950:1995 | Industrial quenching oils — Determination of cooling characteristics — Nickel-alloy probe test method |
09/30213528 DC : 0 | BS EN 60296 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OIL FOR TRANSFORMERS AND SWITCHGEAR |
09/30205523 DC : 0 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
BS EN 60695-1-40:2014 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids |
I.S. EN 15322:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
CEI EN 60076-14 : 2014 | POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
S.R. CWA 15940:2009 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
BS ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems. Specification |
CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
BIS IS 544 : 2014 | GROUNDNUT OIL - SPECIFICATION |
UNE-EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
13/30279896 DC : 0 | BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
11/30249539 DC : 0 | BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
BS EN ISO 10416:2009 | Petroleum and natural gas industries. Drilling fluids. Laboratory testing |
02/207269 DC : 0 | IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT |
BS EN 45545-1:2013 | Railway applications. Fire protection on railway vehicles General |
CEI EN 60695-9-1 : 2014 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE |
S.R. CLC/TR 50503:2010 | GUIDELINES FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS |
BS EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
05/30128501 DC : DRAFT JAN 2005 | IEC 60079-6 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION 'O' |
08/30181966 DC : DRAFT MAY 2008 | BS ISO 13739 - PETROLEUM PRODUCTS - PROCEDURES FOR THE TRANSFER OF BUNKER FUEL TO SHIPS |
12/30263868 DC : 0 | BS EN 60076-14 - POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
12/30268820 DC : 0 | BS EN 60836 - SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES |
CEI EN 61099 : 2011 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
00/106660 DC : DRAFT OCT 2000 | PREN 13924 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
UNE-EN 45545-1:2013 | Railway applications - Fire protection on railway vehicles - Part 1: General |
BIS IS 4277 : 2014 | SUNFLOWER OIL - SPECIFICATION |
UNE-EN 60695-9-1:2013 | Fire hazard testing - Part 9-1: Surface spread of flame - General guidance |
ISO 8217:2017 | Petroleum products Fuels (class F) Specifications of marine fuels |
CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
S.R. CEN/TS 15940:2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
PREN 1825-1 : DRAFT 1995 | INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
I.S. EN 60076-14:2013 | POWER TRANSFORMERS - PART 14: LIQUIDIMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS (IEC 60076-14:2013 (EQV)) |
ISO 15167:1999 | Petroleum products Determination of particulate content of middle distillate fuels Laboratory filtration method |
BS ISO 8178-5:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
UNI CEI EN 45545-1 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
ISO 13739:2010 | Petroleum products Procedures for transfer of bunkers to vessels |
IEC 60296 REDLINE : 4.0 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR |
EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
ASTM D 8175 : 2018 | Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester |
DIN EN 13341:2011-04 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011) |
DIN EN 14998 E : 2005 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: FLUXING OILS - SPECIFICATIONS AND TEST METHODS |
UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
BS EN 14264:2003 | Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Impregnating pitch. Characteristics and test methods |
BS EN 14733 : 2005 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
BS EN 13991:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods |
BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
IEC 60695-1-40:2013 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
EN 60867:1994 | Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons |
CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
EN 62701:2014 | Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears |
DIN EN 982:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
CEN/TS 45545-7:2009 | Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
DIN EN 14998:2005-04 | Derivatives from coal pyrolysis - Coal tar based oils: fluxing oils - Specifications and test methods |
EN 13341:2005+A1:2011 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods |
DIN EN ISO 3672-2:2002-07 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
OVE EN IEC 60296:2023 01 01 | Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment |
BS MA 100:1989 | Specification for petroleum fuels for marine oil engines and boilers |
DEFSTAN 68-251/3(2007) : 2007 | FUEL SOLUBLE LUBRICITY IMPROVING ADDITIVES FOR AVIATION TURBINE FUELS, NATO CODE: S-1747 JOINT SERVICE DESIGNATION: AL-61 |
BS EN ISO 8230-3:2008 | Safety requirements for dry-cleaning machines Machines using combustible solvents |
CEI UNI EN 45545-1 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
DIN EN 15940 E : 2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
PD CEN/TR 16557:2013 | Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination |
CEN/TR 15160:2005 | Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
S.R. CEN/TR 16389:2017 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
BS EN 61099:2010 | Insulating liquids. Specifications for unused synthetic organic esters for electrical purposes |
I.S. EN 60422:2013 | MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV)) |
UNI EN ISO 8230-3 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS |
BS EN 60695-9-1:2013 | Fire hazard testing Surface spread of flame. General guidance |
I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
14/30304007 DC : 0 | BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
BS ISO/TR 13739:1998 | Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships |
11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
12/30261072 DC : 0 | BS ISO 4261 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS |
DIN EN 14214 E : 2003 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
12/30257150 DC : 0 | BS EN 62770 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS LIQUIDS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT |
DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
BS EN 60076-14:2013 | Power transformers Liquid-immersed power transformers using high-temperature insulation materials |
I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
BS ISO/TS 12927:1999 | Lubricants, industrial oils and related products (class L). Family M (metalworking). Guidelines for establishing specifications |
BS EN 60465:1992 | Specification for unused insulating mineral oils for cables with oil ducts |
DIN EN 45545-1:2013-08 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
16/30294369 DC : 0 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
UNE-EN 14188-4:2010 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
03/100561 DC : DRAFT JULY 2003 | IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT |
17/30361296 DC : DRAFT SEP 2017 | BS EN 16734 AMD 1 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
BIS IS 16081 : 2013 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
UNE-EN 60076-14:2014 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
ISO 4113:2010 | Road vehicles Calibration fluids for diesel injection equipment |
BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
BS 684-1.17:1998 | Methods of analysis of fats and fatty oils. Physical methods Flashpoint limit test using Pensky-Martens closed-cup flash tester |
03/309751 DC : DRAFT JUNE 2003 | IEC 60695-9-1 - FIRE HAZARD TESTING - PART 9: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE |
BS 7952:2001 | Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances |
ISO 8178-6:2000 | Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test |
09/30202310 DC : 0 | BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS |
ISO/TR 29662:2009 | Petroleum products and other liquids Guidance for flash point testing |
UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
UNE 206015:2018 | Heat transfer fluids for solar thermal power plants with parabolic trough collector technology. Requirements and tests |
DIN EN 15940:2016-09 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
ISO/TS 11366:2011 | Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
I.S. EN 14188-4:2009 | JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
DIN ISO 8217:2013-12 | PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS (ISO 8217:2012) |
EN 16709:2015/AC:2016 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
S.R. CWA 16379:2011 | FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS |
DIN EN 590:2017-10 | Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017) |
I.S. EN 61039:2008 | CLASSIFICATION OF INSULATING LIQUIDS |
VDE 0370-12 : 1994 | SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS |
BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
IEC TS 60695-1-20:2008 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
IEC TS 60076-14:2009 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
BS EN 14156:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods |
EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
I.S. EN 14023:2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
I.S. EN ISO 8178-5:1998 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS |
I.S. EN 13160-3:2016 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 13341:2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
DIN EN 60867 : 1995 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED LIQUIDS BASED ON SYNTHETIC AROMATIC HYDROCARBONS |
OVE/ONORM EN 60296 : 2013 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012) |
VDE 0372-1 : 1995 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED LIQUIDS BASED ON SYNTHETIC AROMATIC HYDROCARBONS |
BS 3863:1992 | Guide for gas turbines procurement |
VDI 3397 Blatt 2:2014-06 | Maintenance of metalworking fluids for metalcutting and forming operations - Measures for maintaining quality, process improvement, and for reducing solid and liquid waste |
BIS IS 3448 : 2014 | RICE BRAN OIL - SPECIFICATION |
CEI EN 62770 : 2014 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT |
UNI CEI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
DIN EN 15322 E : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping Prevention of cross contamination |
BS 6802:1987 | Specification for unused insulating liquids based on synthetic aromatic hydrocarbons |
BS ISO 4113:2010 | Road vehicles. Calibration fluids for diesel injection equipment |
17/30336222 DC : 0 | BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK |
BS IEC 62899-202:2016 | Printed electronics Materials. Conductive ink |
S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
BS ISO 4020:2001 | Road vehicles. Fuel filters for diesel engines.Test methods |
BS ISO 8178-6:2000 | Reciprocating internal combustion engines. Exhaust emission measurement Report of measuring results and test |
DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
14/30287765 DC : 0 | BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
BS EN 60695-1-20:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance |
BS EN 62770:2014 | Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment |
06/30159746 DC : 0 | BS EN 50503 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - STANDARD FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS |
BS EN 61039:2008 | Classification of insulating liquids |
08/30195180 DC : DRAFT DEC 2008 | BS EN 61099 - SPECIFICATION FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
BS ISO 8217:2017 | Petroleum products. Fuels (class F). Specifications of marine fuels |
BS EN 60296:2012 | Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear |
17/30352956 DC : 0 | BS ISO 8178-6 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST |
DD CEN/TS 45545-7:2009 | Railway applications. Fire protection on railway vehicles Fire safety requirements for flammable liquid and flammable gas installations |
14/30298209 DC : 0 | BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
BS EN 14188-4:2009 | Joint fillers and sealants Specifications for primers to be used with joint sealants |
10/30216699 DC : 0 | BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
BS ISO 10416 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
95/101288 DC : DRAFT FEB 1995 | PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
BS EN 15322:2013 | Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders |
BS ISO 3672-2 : 2000 AMD 13326 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
12/30269145 DC : 0 | BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
DIN EN 13924-1 E : 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
PD ISO/TR 11018:2001 | Essential oils. General guidance on the determination of flashpoint |
10/30215366 DC : 0 | BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE |
BS EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres. Oil immersion \'o\' |
PREN 590 : DRAFT 2011 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
CSA E60079.6 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O" |
14/30310326 DC : 0 | BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
API RP 13I : 2009 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
IEC 62899-202:2016 | Printed electronics - Part 202: Materials - Conductive ink |
I.S. CEN/TR 15160:2005 | PETROLEUM AND RELATED PRODUCTS - APPLICABILITY OF DIESEL FUEL TEST METHODS FOR FATTY ACID METHYL ESTERS (FAME) - INFORMATION AND RESULTS ON ROUND ROBIN TESTS |
I.S. EN 60836:2015 | SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES |
UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
UNI CEN/TR 15367-3 : 2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
PREN 15322 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
I.S. EN 60695-1-40:2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
I.S. EN 15940:2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
DIN EN 16709 E : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
CEI 89-29 : 2010 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
I.S. EN 62701:2014 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - RECYCLED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEARS |
UNI EN 14188-4 : 2009 | JOINT FILLERS AND SEALANTS - PART 4: SPECIFICATIONS FOR PRIMERS TO BE USED WITH JOINT SEALANTS |
DIN EN 60465 : 1994 | SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS |
ISO/TS 12927:1999 | Lubricants, industrial oils and related products (class L) — Family M (Metalworking) — Guidelines for establishing specifications |
NF EN 61099 : 2011 | INSULATING LIQUIDS - SPECIFICATION FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
ISO 15267:1998 | Animal and vegetable fats and oils Flashpoint limit test using Pensky-Martens closed cup flash tester |
ISO 8178-5:2015 | Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels |
UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems Specification |
CEI EN 60296 : 2013 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR |
DIN EN ISO 3672-2 E : 2002 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
IEC 62770:2013 | Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment |
IEC 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
UNE-EN 14733:2006 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
EN 14214:2012+A1:2014/AC:2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
EN 14156:2003 | Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
EN 14998:2005 | Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods |
EN 14260:2003 | Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : road tars - Characteristics and test methods |
EN ISO 8178-5 : 1997 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS |
EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
EN 14188-4:2009 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
UNI EN 13341 : 2011 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
UNI EN 14733 : 2010 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
UNI EN 14023 : 2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
UNI EN 982 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
UNE-EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
UNI EN 15322 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
I.S. CEN TR 15367-3:2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
DIN EN 14188-4:2009-10 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants |
11/30235371 DC : 0 | BS EN 62701 - FLUIDS FOR ELECTRO TECHNICAL APPLICATIONS - RECYCLED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEARS |
BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
BS 4689:1980 | Method for determination of flash and fire points of petroleum products: Cleveland open cup method |
PD CEN/TR 15160:2005 | Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests |
BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
ISO 4020:2001 | Road vehicles — Fuel filters for diesel engines — Test methods |
UNE-EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
BS ISO 13739:2010 | Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM |
CEN/TR 16557:2013 | Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination |
BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
API 13I : 2009 : R2016 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
ISO/TR 13739:1998 | Petroleum products Methods for specifying practical procedures for the transfer of bunker fuels to ships |
API 13I REDLINE : 2009 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
I.S. EN ISO 10416:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
PREN 14214 : DRAFT 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
BS EN 60867:1994 | Insulating liquids. Specifications for unused liquids based on synthetic aromatic hydrocarbons |
13/30267448 DC : 0 | BS EN 60079-6 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
BIS IS 4276 : 2014 | SOYBEAN OIL - SPECIFICATION |
BS EN 60079-6:2007 | Explosive atmospheres Equipment protected by oil immersion \'o\' |
DIN EN ISO 8230-3:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS |
04/30117724 DC : DRAFT AUG 2004 | EN 14023 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK SPECIFICATION FOR POLYMER MODIFIED BITUMENS |
NF EN 50015 : 1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O' |
DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
UNI EN ISO 10416 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
BS 2000-36(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
18/30369065 DC : DRAFT FEB 2018 | BS EN 14214 AMD 2 - LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
I.S. EN 62770:2014 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT |
EN 590:2013 | Automotive fuels - Diesel - Requirements and test methods |
DEFSTAN 91-43/2(1993) : 1993 | LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
I.S. CEN/TR 15138:2005 | PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING |
ISO 18095:2018 | Condition monitoring and diagnostics of power transformers |
I.S. EN 60695-1-20:2016 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
FM 6020 : 2016 | COMPOSITE INTERMEDIATE BULK CONTAINERS (IBCS) |
UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
ISO/TR 11018:1997 | Essential oils General guidance on the determination of flashpoint |
ISO 7628:2010 | Road vehicles Thermoplastics tubing for air braking systems |
DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
S.R. CEN/TS 45545-7:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
DIN EN 14023:2013-04 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
IEC 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
BS EN 14023:2010 | Bitumen and bituminous binders. Specification framework for polymer modified bitumens |
ISO 8230-3:2008 | Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents |
IEC 60695-9-1:2013 | Fire hazard testing - Part 9-1: Surface spread of flame - General guidance |
BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
UNE-EN 60079-6:2016 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
BS EN 14155:2003 | Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods |
BS EN 982 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
UNE-EN 13160-3:2017 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
ISO 3672-2:2000 | Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
ISO 10416:2008 | Petroleum and natural gas industries — Drilling fluids — Laboratory testing |
UNE-EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
IEC 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
UNE-EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
BS EN ISO 8178-5:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Test fuels |
08/30187364 DC : DRAFT JULY 2008 | BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
IEC 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
BS EN 13341 : 2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
IEC 60867:1993 | Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons |
UNE-EN 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
IEC 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
EN ISO 1516:2002 | Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
EN 13924:2006/AC:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
EN ISO 8230-3:2008 | Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
EN 14264:2003 | Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : impregnating pitch - Characteristics and test methods |
EN ISO 3672-2 : 2001 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
EN 14733:2005+A1:2010 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
EN 14155:2003 | Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods |
EN 13991:2003 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: CREOSOTES - SPECIFICATIONS AND TEST METHODS |
EN 15322:2013 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
EN ISO 10416:2009 | Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008) |
EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
I.S. EN 45545-1:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
DD IEC TS 60076-14 : DRAFT 2009 | POWER TRANSFORMERS - PART 14: DESIGN AND APPLICATION OF LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
ISO 19378:2003 | Lubricants, industrial oils and related products (class L) Machine-tool lubricants Categories and specifications |
DD IEC TS 60695-1-20 : DRAFT MAR 2008 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
11/30250572 DC : 0 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
PD CEN/TR 15138:2005 | Petroleum products and other liquids. Guide to flash point testing |
I.S. EN 16900:2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
DIN EN 15322:2013-07 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
UNE-EN 62770:2014 | Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment |
03/100225 DC : DRAFT FEB 2003 | IEC 60836 ED.2 - SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES |
PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
BS ISO 7628:2010 | Road vehicles. Thermoplastics tubing for air braking systems |
SAE J 1696 : 2017 | STANDARD FUEL FILTER TEST FLUID |
BS EN 60422:2013 | Mineral insulating oils in electrical equipment. Supervision and maintenance guidance |
I.S. EN 13924-2:2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
UNI CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
CSA E60079.6 : 2002 : R2011 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O" |
15/30325842 DC : 0 | BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
CEI EN 61039 : 2009 | CLASSIFICATION OF INSULATING LIQUIDS |
01/124221 DC : DRAFT NOV 2001 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
NF EN ISO 10416 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
08/30171587 DC : DRAFT MAY 2008 | BS ISO 7628 - ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS |
BS ISO 4261:2013 | Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications |
09/30206973 DC : 0 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
00/244591 DC : DRAFT OCT 2000 | SPECIFICATION FOR UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR |
13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
CEI EN 60079-6 : 2016 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
03/110060 DC : 0 | BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
BS ISO 19378:2003 | Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications |
BS ISO 4413:1998 | Hydraulic fluid power. General rules relating to systems |
08/30178041 DC : DRAFT FEB 2008 | BS ISO 4113 - ROAD VEHICLES - CALIBRATION FLUIDS FOR DIESEL INJECTION EQUIPMENT |
S.R. CEN/TR 16557:2013 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
CLC/TR 50503 : 2010 | Guidelines for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs |
UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
CEI EN 60695-1-40 : 2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
I.S. EN 60867:1996 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED LIQUIDS BASED ON SYNTHETIC AROMATIC HYDROCARBONS |
ISO 4261:2013 | Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications |
I.S. EN ISO 8230-3:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS |
UNE-EN 61099:2011 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
I.S. EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013 (EQV)) |
I.S. EN 60296:2012 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012 (EQV)) |
UNI ISO 18436-5 : 2013 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
I.S. EN 60079-6:2015 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
I.S. EN 590:2013+A1:2017&LC:2017 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
ISA 12.26.01 : 1998 | ELECTRICAL APPARATUS FOR USE IN CLASS 1, ZONE 1 HAZARDOUS (CLASSIFIED) LOCATIONS: TYPE OF PROTECTION - OIL IMMERSION "O" |
DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
UNE-EN 15322:2014 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
UNE-EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
I.S. EN 61099:2010 | INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
EN 45545-1 : 2013 COR 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
BS EN 14260:2003 | Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Road tars. Characteristics and test methods |
DD ISO/TS 11366:2011 | Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
BS EN 13160-3:2003 | Leak detection systems Liquid systems for tanks |
BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
IEC 61039:2008 | Classification of insulating liquids |
IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
EN 62770:2014 | Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment |
CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
CEN/TR 16389:2017 | Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination |
EN 61039 : 2008 | CLASSIFICATION OF INSULATING LIQUIDS |
CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
DIN EN 14733:2010-12 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
EN 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
EN 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
EN 60695-1-20 : 2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013) |
ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
ISO/TR 29662:2009 | Petroleum products and other liquids Guidance for flash point testing |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
ISO Guide 33:2015 | Reference materials Good practice in using reference materials |
ISO Guide 35:2017 | Reference materials Guidance for characterization and assessment of homogeneity and stability |
ASTM E 2251 : 2014 : REDLINE | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
ISO 13736:2013 | Determination of flash point Abel closed-cup method |
ISO Guide 34:2009 | General requirements for the competence of reference material producers |
ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.