• There are no items in your cart

ISO 2781:2008

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Rubber, vulcanized or thermoplastic Determination of density
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

10-01-2018

Published date

04-22-2008

ISO 2781:2008 specifies two methods of test for the determination of the density of solid vulcanized and thermoplastic rubbers.

Such determinations are of importance in the control of the quality of a rubber compound and in the calculation of the mass of rubber required to produce a given volume of material.

The standard does not cover the determination of the relative density of rubber, which is the ratio of the mass of a given volume of rubber to the mass of an equal volume of pure water at a given temperature.

DevelopmentNote
DRAFT ISO/DIS 2781 is also available for this standard. (01/2017)
DocumentType
Standard
Pages
6
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

07/30164024 DC : 0 BS ISO 23233 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF RESISTANCE TO ABRASION USING A DRIVEN, VERTICAL ABRASIVE DISC
BS EN 50655-3:2017 Electric cables. Accessories. Material characterization Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
DIN ISO 4649:2014-03 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010)
00/560909 DC : DRAFT MAR 2000 BS ISO 8871-2 - ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
05/30134209 DC : DRAFT MAY 2005 HD 631.4 S1 ED. 1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36(42) KV
VDE 0212-2 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
DIN ISO 13226:2015-12 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
13/30290552 DC : 0 BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
BS F 159:2006 Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from oil resistant silicone rubber material conforming to BS F 153. Specification
13/30276381 DC : 0 BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS
BS F 152:2006 Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification
BS 7825-3.6:1997 Calibration of rubber and plastics test equipment. Calibration schedules Dimensional properties
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
EN 50655-3:2017 Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
BS F 156:2006 Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification
UNI EN ISO 23936-2 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
I.S. EN 15502-2-1:2012 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
PREN 3747 : 200P1 AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION
ISO 6072:2011 Rubber Compatibility between hydraulic fluids and standard elastomeric materials
I.S. EN ISO 18797-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
I.S. EN 4595:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
HD 631.4 S1:2008 Electrical cables - Accessories - Material characterisation - Part 4: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
NF ISO 13226 : 2011 RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
DIN EN 14241-1:2013-11 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
DIN EN 26:2015-08 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
BS EN 3747:2007 Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
BS EN 13913:2003 Railway applications. Rubber suspension components. Elastomer-based mechanical parts
BS EN 14241-1:2013 Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners
BS EN 12770:2000 Footwear. Test methods for outsoles. Abrasion resistance
BS EN 13597:2003 Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
UNI EN ISO 8871-2 : 2014 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION
I.S. EN 89:2015 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 15502-2-1:2017-09 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016)
NBR 15880 : 2010 DUCTILE IRON FITTINGS AND ACCESSORIES FOR PIPES OF PVC 6,3 AND POLIETILENE PE - REQUIREMENTS
NBR 15803 : 2010 ERRATA 2010 PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR MECHANICAL JOINT COMPRESSION FITTINGS, BRANCH SADDLES AND TAPPING TEE FOR POLYETHYLENE (PE) PIPES FOR NOMINAL OUTSIDE DIAMETERS BETWEEN 20 MM AND 160 MM, WITH MAXIMUM OPERATION PRESSURE UP TO 1.6 MPA
DEFSTAN 93-55/3(2009) : 2009 BUTYL RUBBER, TYPE NBC
NBR 15750 : 2009 PVC-O (ORIENTED UNPLASTICISED POLYVINYL CHLORIDE) PIPING SYSTEMS FOR THE CONVEYANCE OF WATER OR SEWAGE UNDER PRESSURE - REQUIREMENTS AND TEST METHODS
BS EN 61854:1998 Overhead lines. Requirements and tests for spacers
BS F 164:2006 Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from fluorosilicone rubber material released to BS F 154. Specification
BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures
I.S. EN 483:2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
16/30334942 DC : 0 BS ISO 23337 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING THE IMPROVED LAMBOURN TEST MACHINE
BS ISO 24453:2008 Rubber. Acquisition and presentation of comparable single-point data
PREN 50655-3 : DRAFT 2015 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 3: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
XP PREN 3747 : 1995 XP AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION
14/30301115 DC : 0 BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
11/30250546 DC : 0 BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
PREN 549 : DRAFT 2017 RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
PREN 14241-1 : DRAFT 2011 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
BS ISO 19984-2:2017 Rubber and rubber products. Determination of biobased content Biobased carbon content
BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
BS ISO 13628-10 : 2005 AMD 16775 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
NF EN 61854 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
PREN 4594 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
UNE-ISO 13226:2017 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
BS ISO 13226:2011 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
PREN 4691-1 : DRAFT 2015 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
CEI EN 61854 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
I.S. EN ISO 23936-2:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011)
CEI 20-94 : 2010 ELECTRICAL CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV
EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
ASTM D 5963 : 2004 : R2010 : EDT 1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
DIN EN 89:2015-08 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 3050:1998-07 AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION
BS EN ISO 8871-1:2004 Elastomeric parts for parenterals and for devices for pharmaceutical use Extractables in aqueous autoclavates
BS EN 377:1993 Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
BS EN 26:1998 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
EN 61854:1998 Overhead lines - Requirements and tests for spacers
I.S. EN 26:2015 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
I.S. EN 14241-1:2013 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
DIN EN 13597:2008-04 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
I.S. EN 3747:2007 AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION
VDI 3388:2012-03 Materials for trimming and forming dies
BS 4832:1987 Specification for compatibility between elastomeric materials and hydraulic fluids
DIN EN 15502-2-1:2013-01 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures
ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
13/30290592 DC : 0 BS EN 6111 - AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD
BS EN 4595:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance
07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
BS F 157:2006 Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification
BS F 162:2006 Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from ethylene-propylene rubber material conforming to BS F 156. Specification
11/30187339 DC : 0 BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES
ISO 1920-4:2005 Testing of concrete Part 4: Strength of hardened concrete
ASTM D 8115 : 2017 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
BS ISO 4649:2017 Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
DIN ISO 4649 E : 2014 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010)
PD CEN/TR 15990:2010 Data sheets. Footwear tests materials and test adhesives
BS ISO 6072:2011 Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
17/30355087 DC : 0 BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
PREN 3624 : 200P1 AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION
NF ISO 6072 : 2012 RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
CEN/TR 15990:2010/AC:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
ISO 13226:2011 Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
UNI EN 4594 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
I.S. EN 61854:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BS EN 15502-2-1 : 2012 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
I.S. HD 631.4:2008 ELECTRICAL CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV
ISO 24453:2008 Rubber Acquisition and presentation of comparable single-point data
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
ASTM D 5963 : 2004 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures
DIN EN ISO 8871-2:2014-08 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003 + AMD.1:2005)
BS EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN ISO 8871-2:2004/A1:2014 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003/AMD 1:2005)
I.S. EN ISO 8871-2:2004 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003)
ONORM ISO 4649 : 2015 RUBBER, VULCANIZED OR THERMOPLATIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010)
EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
EN 483:1999/A4:2007 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
UNI EN 14241-1 : 2013 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
BS EN ISO 12736:2014 Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
10/30218935 DC : 0 BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
BS F 153:2006 Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification
BS EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers
BS EN 4594:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
DIN EN 61854 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BS ISO 6356:2012 Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test
BS F 154:2006 Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification
10/30196881 DC : 0 BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
BS ISO 23337:2016 Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using the Improved Lambourn test machine
07/30161672 DC : 0 BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
BS 7933-4:2008 Electric cables. Accessories. Material characterisation Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
ASTM D 5963 : 2004 : R2010 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
01/106321 DC : DRAFT AUG 2001 PREN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
PREN 6111 : 200P1 AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD
BS 7677:1993 Recommendations for classification of imperfections in pipe joint rings
ISO 19984-2:2017 Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content
PREN 3207 : 1996 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
17/30328799 DC : 0 BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
I.S. EN ISO 12736:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)
ISO 6356:2012 Textile and laminate floor coverings Assessment of static electrical propensity Walking test
ISO 9691:1992 Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections
ASTM D 5963 : 2004 : R2015 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
ISO 20871:2018 Footwear — Test methods for outsoles — Abrasion resistance
ISO 4649:2017 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
S.R. CEN TR 15990:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
IEC 61854:1998 Overhead lines - Requirements and tests for spacers
DIN EN 13831:2007-12 Closed expansion vessels with built in diaphragm for installation in water
BS EN 3050:1998 O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
BS EN 483 : 2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
ISO 8871-2:2003 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 2: Identification and characterization
UNE-ISO 4649:2013 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
ISO 8871-1:2003 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 1: Extractables in aqueous autoclavates
BS EN 13831:2007 Closed expansion vessels with built-in diaphragm for installation in water
ISO 12736:2014 Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
UNE-EN 89:2016 Gas-fired storage water heaters for the production of domestic hot water
UNE-EN 26:2016 Gas-fired instantaneous water heaters for the production of domestic hot water
BS EN 3207:1998 Rubber compounds. Technical specification
BS EN 4691-1:2017 Aerospace series. Tie rod with integrated bolts Technical specification
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011)
EN 4594:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
EN 15502-2-1:2012+A1:2016 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
EN 13913:2003 Railway applications - Rubber suspension components - Elastomer-based mechanical parts
EN 13597:2003 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
EN 3207 : 1998 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
EN 4595:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
EN ISO 12736:2014 Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014)
EN 3747:2007 Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water
EN ISO 8871-1 : 2004 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 1: EXTRACTABLES IN AQUEOUS AUTOCLAVATES
EN 3050:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
BS 903-3:2003 Physical testing of rubber Acquisition and presentation of comparable single-point data
15/30325656 DC : 0 BS EN 50655-3 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 3: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV
I.S. EN 50655-3:2017 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 3: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV
14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
I.S. EN 4594:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
10/30219184 DC : 0 BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
05/30130019 DC : DRAFT JULY 2005 BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION
BS 7825-3.4:1998 Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of rubber
91/83289 DC : DRAFT DEC 1991 PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION
UNI EN 4595 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
14/30314166 DC : 0 BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION
07/30131694 DC : 0 BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES
NFC 33 009-4 : 2008 ELECTRICAL CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36(42) KV
PREN 4595 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
PREN 6109 : 200P2 AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION
I.S. EN 4691-1:2017 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ISO 23337:2016 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
BS EN ISO 8871:1997 Elastomeric parts for aqueous parenteral preparations
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
BS EN ISO 8871-2 : 2004 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION
EN 12770 : 1999 FOOTWEAR - TEST METHODS FOR OUTSOLES - ABRASION RESISTANCE
DIN EN 483:2000-06 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
DIN EN 13913:2003-08 RAILWAY APPLICATIONS - RUBBER SUSPENSION COMPONENTS - ELASTOMER-BASED MECHANICAL PARTS
ONORM EN ISO 12736 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)

ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.