ISO 287:2017
Current
Current
The latest, up-to-date edition.
Paper and board — Determination of moisture content of a lot — Oven-drying method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
11-02-2017
ISO 287:2017 specifies an oven-drying method for the determination of the moisture content of a lot of paper and board. The procedure in Clause 8, describing how the test pieces are drawn from the lot, is performed at the time of sampling.
ISO 287:2017 is applicable to every type of lot of paper and board, including corrugated board and solid board, provided that the paper or board does not contain any substances, other than water, that are volatile at the temperature specified in this document.
NOTE For determination of the dry matter content of a sample of paper or board, e.g. for calculation of the dry mass of the sample, ISO 638[1] can be used.
| Committee |
ISO/TC 6/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 287. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| I.S. EN ISO 12625-12:2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| 03/309374 DC : DRAFT JUNE 2003 | ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| BS EN 60641-2:2004 | Pressboard and presspaper for electrical purposes Methods of tests |
| NF ISO 20369 : 2010 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
| 11/30247446 DC : 0 | BS EN ISO 12625-11 - TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| BS ISO 11480:2017 | Pulp, paper and board. Determination of total chlorine and organically bound chlorine |
| 17/30353869 DC : DRAFT SEP 2017 | BS EN 17163 - PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD |
| DIN EN ISO 12625-12 E : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| EN ISO 638:2008 | Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008) |
| 09/30172818 DC : 0 | BS ISO 15320 - PAPER, BOARD AND PULPS - DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT |
| DD IEC/TS 62332-1:2011 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components General requirements |
| NF EN 60554-2 : 2003 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BS 5626-2:1979 | Cellulosic papers for electrical purposes Methods of test |
| I.S. EN 60554-2:2002 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| I.S. EN 60641-2:2004 | SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| DIN EN ISO 12625-11:2013-04 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| I.S. EN ISO 638:2008 | PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD |
| DIN EN 15519 E : 2008 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT |
| BS EN ISO 12625-1:2011 | Tissue paper and tissue products General guidance on terms |
| UNE-EN ISO 12625-1:2012 | Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011) |
| BS EN ISO 12625-4:2016 | Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| I.S. EN ISO 12625-9:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| EN 12281:2002 | Printing and business paper - Requirements for copy paper for dry toner imaging processes |
| EN ISO 12625-5:2016 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| EN ISO 12625-6:2016 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| EN ISO 12625-4:2016 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| 13/30272957 DC : 0 | BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| DIN VDE 0311-20 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; METHODS OF TEST |
| TAPPI T 550 : 2013 | DETERMINATION OF EQUILIBRIUM MOISTURE IN PULP, PAPER AND PAPERBOARD FOR CHEMICAL ANALYSIS |
| 15/30323953 DC : 0 | BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| 15/30323949 DC : 0 | BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION |
| BS EN ISO 12625-12:2010 | Tissue paper and tissue products Determination of tensile strength of perforated lines. Calculation of perforation efficiency |
| BS ISO 778:2005 | Paper, board and pulp. Determination of acid-soluble copper |
| 09/30207367 DC : 0 | BS ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL PRINCIPLES FOR THE USE OF TERMS |
| 08/30182464 DC : DRAFT JUNE 2008 | BS ISO 20370 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
| BS 2924-4:1990 | Aqueous extracts of paper, board and pulp General method for determination of water-soluble chlorides |
| BS 5354-2:1994 | Specification for laminated pressboard for electrical purposes Methods of test |
| BS ISO 15361:2000 | Pulps. Determination of zero-span tensile strength, wet or dry |
| 03/310719 DC : DRAFT JUNE 2003 | ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| PREN 17163 : DRAFT 2017 | PULP, PAPER AND BOARD - DETERMINATION OF PRIMARY AROMATIC AMINES (PAA) IN A WATER EXTRACT BY A LC/MS/MS METHOD |
| CEI EN 60763-2 : 2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| UNI EN ISO 12625-11 : 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| EN ISO 12625-11:2012 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| I.S. EN 60763-2:2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| IEC TS 62332-1:2011 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements |
| ISO 12625-3:2014 | Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk |
| DIN EN 14719 E : 2005 | PULP, PAPER AND BOARD - DETERMINATION OF THE DIISOPROPYLNAPHTHALENE (DIPN) CONTENT BY SOLVENT EXTRACTION |
| BS EN 645:1994 | Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract |
| UNE-EN ISO 536:2013 | Paper and board - Determination of grammage (ISO 536:2012) |
| IEC 60554-2:2001 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| BS EN ISO 12625-5:2016 | Tissue paper and tissue products Determination of wet tensile strength |
| I.S. EN ISO 12625-3:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014) |
| I.S. EN ISO 12625-5:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016) |
| I.S. EN ISO 12625-8:2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER-ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
| I.S. EN ISO 12625-6:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE |
| I.S. EN ISO 12625-4:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| DIN VDE 0311-32 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES; SPECIFICATIONS; CAPACITOR PAPERS |
| BS 3631:1984 | Method for determination of ash of paper and board |
| VDE 0311-32 : 1988 | CELLULOSIC PAPER FOR ELECTRICAL PURPOSES - SPECIFICATIONS; CAPACITOR PAPERS |
| DIN EN 60763-2 : 2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| NF ISO 20370 : 2009 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
| 06/30159524 DC : 0 | BS EN ISO 12625-10 - TISSUE PAPER AND TISSUE PRODUCTS - PART 10: DETERMINATION OF DEMAND WATER ABSORPTION RATE AND CAPACITY, UNDER CONTROLLED HYDRAULIC PRESSURE |
| I.S. EN ISO 12625-11:2012 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| BS 2924-2:1983 | Aqueous extracts of paper, board and pulp Method for determination of conductivity |
| DIN 55524-2:2016-08 | PACKAGING - ATTRIBUTES - PART 2: ATTRIBUTES FOR PACKAGING MADE OF SOLID FIBREBOARD |
| DIN EN ISO 638 E : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD |
| UNI EN 15519 : 2008 | PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS - PREPARATION OF AN ORGANIC SOLVENT EXTRACT |
| UNI EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| UNI ISO 6587 : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACTS |
| BS ISO 9197:2006 | Paper and board. Determination of water-soluble chlorides |
| ISO 777:2005 | Paper, board and pulp Determination of acid-soluble calcium |
| BS ISO/IEC 29142-1:2013 | Information technology. Print cartridge characterization General: terms, symbols, notations and cartridge characterization framework |
| BS EN ISO 638:2008 | Paper, board and pulps. Determination of dry matter content. Oven-drying method |
| 03/309344 DC : DRAFT JUNE 2003 | ISO 1830 - PAPER, BOARD AND PULPS - DETERMINATION OF MANGANESE |
| DIN ISO 20370:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content (ISO 20370:2009) |
| 08/30182461 DC : DRAFT JUNE 2008 | BS ISO 20369 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
| BS ISO 4046-5:2016 | Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
| BS ISO 1830:2005 | Paper, board and pulps. Determination of acid-soluble manganese |
| BS ISO 20369:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content |
| BS ISO 10775:2013 | Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method |
| CEI EN 60554-2 : 2002 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| ISO 11480:2017 | Pulp, paper and board — Determination of total chlorine and organically bound chlorine |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| ISO 9197:2016 | Paper, board and pulps Determination of water-soluble chlorides |
| ISO 17812:2007 | Paper, board and pulps Determination of total magnesium, total calcium, total manganese, total iron and total copper |
| ISO 4046-5:2002 | Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
| I.S. EN 60450:2004 | MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS |
| DIN EN ISO 536:2012-11 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| BS EN 15519:2007 | Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract |
| BS EN ISO 12625-8:2010 | Tissue paper and tissue products Water-absorption time and water-absorption capacity, basket-immersion test method |
| IEC 60763-2:2007 | Specification for laminated pressboard - Part 2: Methods of test |
| BS EN 12281:2002 | Printing and business paper. Requirements for copy paper for dry toner imaging processes |
| UNE-EN ISO 12625-8:2011 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| DIN EN ISO 536 E : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| UNI EN ISO 12625-8 : 2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER- ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
| UNI EN ISO 12625-3 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK |
| UNI EN ISO 12625-1 : 2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| 03/309373 DC : DRAFT JUNE 2003 | ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| BS ISO 17812:2007 | Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper |
| BS 6091-2:1987 | Vulcanized fibre for electrical purposes Methods of test |
| 16/30325731 DC : 0 | BS ISO 11480 - PULP, PAPER AND BOARD - DETERMINATION OF TOTAL CHLORINE AND ORGANICALLY BOUND CHLORINE |
| BS ISO 20370:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content |
| DIN EN ISO 12625-12:2010-05 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| CEI EN 60641-2 : 2005 | PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 01/203394 DC : DRAFT MAY 2001 | IEC 60641-2 - PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 03/309346 DC : DRAFT JUNE 2003 | EN 14719 - PULP, PAPER AND BOARD - DETERMINATION OF THE DIISOPROPYLNAPHTALENE (DIPN) CONTENT BY SOLVENT EXTRACTION |
| BS ISO 1762:2015 | Paper, board and pulps. Determination of residue (ash) on ignition at 525 °C |
| 13/30286354 DC : 0 | BS EN ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
| UNI ISO 17812 : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF TOTAL MAGNESIUM, TOTAL CALCIUM, TOTAL MANGANESE, TOTAL IRON AND TOTAL COPPER |
| UNE-EN ISO 12625-11:2013 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| DIN ISO 20369:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content (ISO 20369:2009) |
| NF EN 60450 : 2004 AMD 1 2007 | MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS |
| ISO 1830:2005 | Paper, board and pulps Determination of acid-soluble manganese |
| ISO 12625-1:2011 | Tissue paper and tissue products Part 1: General guidance on terms |
| ISO 779:2005 | Paper, board and pulp Determination of acid-soluble iron |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| DIN EN ISO 12625-9:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| DIN EN ISO 12625-3:2014-09 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
| UNE-EN ISO 12625-4:2017 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| BS EN ISO 12625-3:2014 | Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk |
| BS EN ISO 536:2012 | Paper and board. Determination of grammage |
| ISO 12625-12:2010 | Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency |
| BS EN ISO 12625-9:2005 | Tissue paper and tissue products Determination of ball burst strength |
| ISO 12625-8:2010 | Tissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method |
| UNI EN ISO 536 : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| BS EN 920:2001 | Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract |
| BS EN ISO 12625-6:2016 | Tissue paper and tissue products Determination of grammage |
| UNE-EN ISO 12625-5:2017 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| BS EN 647:1994 | Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract |
| UNE-EN ISO 12625-3:2015 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| UNE-EN ISO 12625-9:2015 | Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
| ISO 638:2008 | Paper, board and pulps Determination of dry matter content Oven-drying method |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 12625-9:2015 | Tissue paper and tissue products Part 9: Determination of ball burst strength |
| UNE-EN ISO 12625-6:2017 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| ISO 12625-4:2016 | Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| ONORM EN ISO 536 : 2013 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| BS EN 14719:2005 | Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction |
| ISO 6588:1981 | Paper, board and pulps Determination of pH of aqueous extracts |
| EN 14719:2005 | Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
| EN 15519:2007 | Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
| EN ISO 12625-8:2010 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| EN ISO 12625-9:2015 | Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
| EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| EN ISO 12625-1:2011 | Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011) |
| EN 647:1993 | Paper and board intended to come into contact with foodstuffs - Preparation of a hot water extract |
| BS 2924-3:1990 | Aqueous extracts of paper, board and pulp Titrimetric method for determination of water-soluble sulphates |
| ISO 778:2005 | Paper, board and pulp Determination of acid-soluble copper |
| ISO 10775:2013 | Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method |
| BS ISO 779:2005 | Paper, board and pulp. Determination of acid-soluble iron |
| UNE-EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| 03/310720 DC : DRAFT JUNE 2003 | ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
| UNI EN ISO 638 : 2009 | PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD |
| ISO 10716:1994 | Paper and board Determination of alkali reserve |
| 17/30357546 DC : 0 | BS EN ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| 09/30201943 DC : 0 | BS EN ISO 12625-8 - TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER-ABSORPTION CAPACITY, BASKET- IMMERSION TEST METHOD |
| ISO 1762:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 525 degrees C |
| 06/30099592 DC : DRAFT JAN 2006 | ISO 17812 - PAPER, BOARD AND PULP - DETERMINATION OF MAGNESIUM, CALCIUM, MANGANESE, IRON AND COPPER |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| BS EN 60450:2004 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| 12/30258621 DC : 0 | BS ISO/IEC 29142-1 - CARTRIDGE CHARACTERIZATION STANDARD - PART 1: GENERAL: TERMS, SYMBOLS AND NOTATIONS |
| BS ISO 9198:2001 | Paper, board and pulp. Determination of water-soluble sulfates |
| PREN ISO 12625-3 : DRAFT 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013) |
| NF EN 60641-2 : 2005 | PRESSBOARD AND PRESS PAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TESTS |
| BS ISO 10716:1994 | Paper and board. Determination of alkali reserve |
| BS EN ISO 12625-11:2012 | Tissue paper and tissue products Determination of wet ball burst strength |
| BS EN 60763-2:2007 | Specification for laminated pressboard Methods of test |
| BS ISO 777:2005 | Paper, board and pulp. Determination of acid-soluble calcium |
| BS EN 60554-2:2002 | Cellulosic papers for electrical purposes Methods of test |
| BS ISO 536 : 1995 AMD 9309 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| 03/310721 DC : DRAFT JUNE 2003 | ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
| ISO 20370:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of acetate content |
| BS ISO 2144:2015 | Paper, board and pulps. Determination of residue (ash) on ignition at 900 °C |
| I.S. EN ISO 12625-1:2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| ISO/IEC 29142-1:2013 | Information technology Print cartridge characterization Part 1: General: terms, symbols, notations and cartridge characterization framework |
| ISO 20369:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of citrate content |
| ISO 15361:2000 | Pulps Determination of zero-span tensile strength, wet or dry |
| I.S. EN ISO 536:2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| IEC 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
| ISO 12625-6:2016 | Tissue paper and tissue products Part 6: Determination of grammage |
| ISO 12625-5:2016 | Tissue paper and tissue products — Part 5: Determination of wet tensile strength |
| BS EN 12858:1999 | Paper. Printing and business paper. Requirements for continuous stationery |
| IEC 60450:2004+AMD1:2007 CSV | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| DIN EN 14719:2005-10 | Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
| EN 60763-2:2007 | Specification for laminated pressboard - Part 2: Methods of test |
| DIN EN ISO 638:2009-01 | Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008) |
| EN ISO 12625-3:2014 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN 15519:2008-01 | Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
| EN 60554-2:2002 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| EN 60450:2004/A1:2007 | MEASUREMENT OF THE AVERAGE VISCOMETRIC DEGREE OF POLYMERIZATION OF NEW AND AGED CELLULOSIC ELECTRICALLY INSULATING MATERIALS |
| EN 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
| BS 3432:1980 | Method for determination of grammage of paper and board |
| ISO 638:2008 | Paper, board and pulps Determination of dry matter content Oven-drying method |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.