ISO 2878:2017
Current
Current
The latest, up-to-date edition.
Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
06-12-2017
ISO 2878:2017 specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose electrical resistance measured between defined points, when new, does not exceed 3 108 and whose conductivity is derived from the addition of carbon black and/or other appropriate substances to the bulk of the material.
NOTE Highly conductive mixes cannot be made in this way.
ISO 2878:2017 specifies the electrode configuration for basic geometries, but it is intended that reference be made to relevant product specifications for requirements for specific products.
It does not apply to:
a) products the relevant surfaces of which are composed of mixtures of insulating and conductive areas;
b) products with a substantial surface area of insulating material, except for footwear (which does not normally have a conductive or antistatic upper).
| DevelopmentNote |
Supersedes ISO/DIS 2878. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI ISO 2878:2017 | Identical |
| NF ISO 2878 : 2017 | Identical |
| BS ISO 2878:2017 | Identical |
| UNI ISO 2878 : 2012 | Identical |
| NEN ISO 2878 : 2017 | Identical |
| NFT 47 132 : 1973 XP | Similar to |
| UNE-ISO 2878:2013 | Identical |
| SAC GB/T 11210 : 1989 | Identical |
| UNE 53605:1989 | Identical |
| NBN T 31 030 : 1988 | Identical |
| UNI 8730 : 1985 | Similar to |
| PN ISO 2878 : 2015 | Identical |
| SANS 2878 : 2ED 2011 | Identical |
| DIN ISO 2878:1997-06 | Identical |
| 16/30334537 DC : 0 | BS ISO 16392 - TYRES - ELECTRICAL RESISTANCE - TEST METHOD FOR MEASURING ELECTRICAL RESISTANCE OF TYRES ON A TEST RIG |
| BS 3849-1:1988 | Conical connectors for anaesthetic and respiratory equipment Specification for cones and sockets (excluding 8.5 mm size) |
| DIN 53482 : 1983 | METHODS OF TEST FOR MATERIALS FOR ELECTRICAL PURPOSES - MEASURING OF THE ELECTRICAL RESISTANCE OF NON-METALLIC MATERIALS |
| ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
| I.S. EN 124-5:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| DIN EN ISO/IEC 80079-38:2012-08 (Draft) | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| BS EN ISO 80601-2-13:2012+A2:2019 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| EN ISO 80601-2-13:2012 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| DEFSTAN 00-35(PT4)/4(2006) : 2006 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS |
| 12/30265310 DC : 0 | BS EN 124-5 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE FROM COMPOSITE MATERIALS |
| BS EN ISO 80601-2-13:2012 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| I.S. EN 740:1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| BS 7825-3.2:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Electrical properties |
| 94/713480 DC : DRAFT NOV 1994 | PREN 1710 - MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS |
| ISO 16392:2017 | Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig |
| 06/30153862 DC : DRAFT JULY 2006 | BS ISO 8031 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL PROPERTIES |
| ANSI/AAMI/IEC TIR62354:2015 | GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| DIN EN ISO 8835-2:2009-08 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| UNE-EN ISO 80601-2-13:2013 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| BS EN ISO 8835-2:2009 | Inhalational anaesthesia systems Anaesthetic breathing systems (ISO 8835-2:2007) |
| BS EN 12527:1999 | Castors and wheels. Test methods and apparatus |
| BS EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity |
| DIN EN ISO 8031:2010-04 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
| BS 5724-1(1989) : 1989 AMD 6715 | MEDICAL ELECTRICAL EQUIPMENT - GENERAL REQUIREMENTS FOR SAFETY |
| BS 3353:1987 | Specification for anaesthetic reservoir bags |
| OVE/ONORM EN 60601-1 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| VDE 0303-30 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| I.S. EN ISO 8835-2:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| BS 5724-2.204(1999) : 1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| BS CECC00015-1(1991) : AMD 7443 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: BASIC SPECIFICATION: PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES - GENERAL REQUIREMENTS |
| UNE-EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| 07/30166095 DC : 0 | EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS |
| CSA C22.2 No. 60601.1 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| IEC TR 62354:2014 | General testing procedures for medical electrical equipment |
| CSA Z8835.2 : 2008 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS FOR ADULTS |
| EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
| ISO 8835-2:2007 | Inhalational anaesthesia systems Part 2: Anaesthetic breathing systems |
| NF EN ISO 8031 : 2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
| ONORM EN ISO 8031 : 2010 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
| UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
| I.S. EN ISO 8031:2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
| EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
| UNI EN ISO 8031 : 2009 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY |
| UNI EN 1710 : 2008 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN ISO/IEC 80079-38 E : 2017 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| ISO 2951:2012 | Rubber, vulcanized or thermoplastic Determination of insulation resistance |
| BS EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of composite materials |
| UNI EN ISO 8835-2 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| DIN EN 124-5 E : 2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| 12/30243465 DC : 0 | BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN 124-5:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| PD IEC/TR 60601-4-3:2015 | Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements |
| BS EN ISO/IEC 80079-38 : 2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
| I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| I.S. EN ISO/IEC 80079-38:2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
| DIN EN 1710:2008-08 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| 00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| BS EN 740:1999 | Anaesthetic workstations and their modules. Particular requirements |
| BS EN 1710 : 2005 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| UNE-EN ISO 8031:2010 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
| UNI EN ISO 80601-2-13 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION |
| 04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| EN 1710:2005+A1:2008/AC:2010 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| EN 28031 : 1993 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE |
| EN 740:1998/A1:2004 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| EN ISO 8835-2:2009 | Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007) |
| 11/30212452 DC : 0 | BS ISO 2951 - VULCANIZED RUBBER - DETERMINATION OF INSULATION RESISTANCE |
| EI TP PETROLEUM ROAD TANKER : 2010 | PETROLEUM ROAD TANKER DESIGN AND CONSTRUCTION |
| BS ISO 16392:2017 | Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig |
| 04/30050436 DC : DRAFT JUN 2004 | BS ISO 22613 - PROTECTIVE CLOTHING - GENERAL TEST METHODS AND PERFORMANCE REQUIREMENTS FOR HAND PROTECTION |
| BS 7734:1994 | Specification for anaesthetic circle breathing systems |
| BS EN 28031:1993 | Rubber and plastics hoses and hose assemblies. Determination of electrical resistance |
| I.S. EN ISO 80601-2-13:2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011) |
| ISO 22878:2004 | Castors and wheels — Test methods and apparatus |
| PD IEC/TR 62354:2014 | General testing procedures for medical electrical equipment |
| EN 12527:1998 | Castors and wheels - Test methods and apparatus |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.