• There are no items in your cart

ISO 3007:1999

Current
Current

The latest, up-to-date edition.

Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

10-14-1999

This International Standard specifies a method for the determination of the vapour pressure of liquid petroleum

products consisting of essentially or wholly of hydrocarbon components, or containing oxygenated hydrocarbons of

specific types and at specified maximum concentrations. The method does not apply outside these concentration

levels, nor to any blends containing methanol or other oxygenated hydrocarbons not covered in note 1.

NOTE 1 The maximum concentration of ethers containing 5 or more carbon atoms is 15 % (V/V), and for ethanol is 10 %

(V/V). For higher alcohols, the maximum concentration is 7 % (V/V).

NOTE 2 For the purposes of this International Standard, the term "%(V/V)" is used to represent the volume fraction of a

material.

For petroleum products containing methanol, or other oxygenated hydrocarbons outside the scope of note 1, a dry

vapour-pressure test method should be used. For liquefied petroleum gases, ISO 4256 should be used. The test

method may be applied to volatile crude petroleum with a vapour pressure exceeding 10 kPa, although the

precision has not been evaluated.

Four procedures are described in this International Standard. Procedures A and B are alternative apparatus

configurations for products with a Reid vapour pressure up to 180 kPa, Procedure C is applied to liquid products

with a Reid vapour pressure above 180 kPa, and Procedure D applies to aviation gasolines with a Reid vapour

pressure of approximately 50 kPa.

Vapour pressure is an important physical property of volatile liquids, and has critical performance implications for

automotive and aviation gasolines. Vapour pressure is also one of the properties affecting atmospheric evaporation,

and is therefore increasingly used in regulations relating to emissions and air quality control. Vapour pressure is

also a critical property limiting the performance and safety of operation of equipment during transfer operations.

NOTE Because the external atmospheric pressure is counteracted by the atmospheric pressure initially in the vapour

chamber, the Reid vapour pressure is approximately the "absolute" vapour pressure at 37,8 °C. The Reid vapour pressure

differs from the true vapour pressure of the sample owing to slight vaporization of the sample and the pressure of water vapour

and air in the confined space.

DocumentType
Standard
Pages
17
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
BIS IS 1448-39 : 2012 Identical
NEN ISO 3007 : 1999 Identical
BS ISO 3007:1999 Identical
NBN EN-12 : 1994 Identical
BS 2000-69(2001) : 2001 Identical
NFM 07 007 : 1969 Similar to

13/30279896 DC : 0 BS ISO 8178-5 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
11/30227325 DC : 0 BS ISO 4164 - MOPEDS - ENGINE TEST CODE - NET POWER
BS EN ISO 10416:2009 Petroleum and natural gas industries. Drilling fluids. Laboratory testing
I.S. EN ISO 10416:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
BS ISO 8178-5:2008 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
ISO 8178-6:2000 Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test
BS EN ISO 3838:2004 Methods of test for petroleum and its products. BS 2000-189/190. Crude petroleum and liquid or solid petroleum products. Determination of density or relative density. Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
11/30227322 DC : 0 BS ISO 4106 - MOTORCYCLES - ENGINE TEST CODE - NET POWER
05/30143111 DC : DRAFT DEC 2005 EN 13016-1 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
BS ISO 4164:2012 Mopeds. Engine test code. Net power
BS 2000-365(1996) : 1996 METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD
ISO 6460-1:2007 Motorcycles Measurement method for gaseous exhaust emissions and fuel consumption Part 1: General test requirements
ISO 4256:1996 Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method
ISO 12185:1996 Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
ISO 3838:2004 Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
I.S. EN ISO 13734:2013 NATURAL GAS - ORGANIC COMPONENTS USED AS ODORANTS - REQUIREMENTS AND TEST METHODS (ISO 13734:2013)
I.S. EN ISO 3838:2004 CRUDE PETROLEUM AND LIQUID OR SOLID PETROLEUM PRODUCTS - DETERMINATION OF DENSITY OR RELATIVE DENSITY - CAPILLARY STOPPERED PYCNOMETER AND GRADUATED BICAPILLARY PYCNOMETER METHODS
I.S. EN ISO 3170:2004 PETROLEUM LIQUIDS - MANUAL SAMPLING
I.S. EN ISO 8178-5:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
VDI 3479:2010-08 Emission control - Marketing installation tank farms
BS 2000-189.190(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-189/190 - CRUDE PETROLEUM AND LIQUID OR SOLID PETROLEUM PRODUCTS - DETERMINATION OF DENSITY OR RELATIVE DENSITY - CAPILLARY-STOPPERED PYKNOMETER AND GRADUATED BICAPILLARY PYKNOMETER METHODS
17/30352956 DC : 0 BS ISO 8178-6 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 6: REPORT OF MEASURING RESULTS AND TEST
BS ISO 10416 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
BS 2000-270(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LEAD CONTENT OF GASOLINE - IODINE MONOCHLORIDE METHOD
BS ISO 6460-1 : 2007 MOTORCYCLES - MEASUREMENT METHOD FOR GASEOUS EXHAUST EMISSIONS AND FUEL CONSUMPTION - PART 1: GENERAL TEST REQUIREMENTS
EN 13016-1:2018 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
I.S. EN 13016-1:2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
ISO 8178-5:2015 Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels
DIN EN ISO 13734:2014-03 Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013)
DIN EN ISO 3838:2004-09 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
UNE-EN ISO 13734:2014 Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013)
EN ISO 8178-5 : 1997 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS
UNI EN ISO 13734 : 2014 NATURAL GAS - ORGANIC COMPONENTS USED AS ODORANTS - REQUIREMENTS AND TEST METHODS
BS 4714:1980 Method for laboratory determination of density or relative density of crude petroleum and liquid petroleum products (hydrometer method)
DIN EN 13016-1:2007-11 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT
BS 4699(1985) : 85 AMD 8893 METHODS FOR DETERMINATION OF DENSITY OR RELATIVE DENSITY OF PETROLEUM AND PETROLEUM PRODUCTS (PYKNOMETER METHODS)
ISO 4106:2012 Motorcycles — Engine test code — Net power
BS ISO 4106:2012 Motorcycles. Engine test code. Net power
BS ISO 8178-6:2000 Reciprocating internal combustion engines. Exhaust emission measurement Report of measuring results and test
BS 2000-160(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-160: CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD
API 13I REDLINE : 2009 RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS
BS 7392:1990 Method for determination of distillation characteristics of petroleum products
API 13I : 2009 : R2016 RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS
10/30206562 DC : 0 BS ISO 6855-1 - MOPEDS - MEASUREMENT METHOD FOR GASEOUS EXHAUST EMISSIONS AND FUEL CONSUMPTION - PART 1: GENERAL TEST REQUIREMENTS
UNI EN ISO 10416 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
ISO 4164:2012 Mopeds Engine test code Net power
API RP 13I : 2009 RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS
NF EN 13016-1 : 2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
BS EN 13016-1:2007 Liquid petroleum products. Vapour pressure Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS 2000-394(2007) : 2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
DIN EN ISO 3170:2004-06 Petroleum liquids - Manual sampling (ISO 3170:2004)
BS EN ISO 12185:1996 Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method
BS EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method
ISO 3170:2004 Petroleum liquids — Manual sampling
BS EN ISO 4256:1998 Liquid petroleum products. Determination of gauge vapour pressure. LPG method
ISO 10416:2008 Petroleum and natural gas industries — Drilling fluids — Laboratory testing
ISO 3830:1993 Petroleum products Determination of lead content of gasoline Iodine monochloride method
BS EN ISO 8178-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
ISO 13734:2013 Natural gas — Organic components used as odorants — Requirements and test methods
EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
EN ISO 13734:2013 Natural gas - Organic components used as odorants - Requirements and test methods (ISO 13734:2013)
EN ISO 4256:1998 Liquefied petroleum gases - Determination of gauge pressure - LPG method (ISO 4256:1996)
EN ISO 10416:2009 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008)
BS 2000-69(1982) : 1982 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - REID VAPOUR PRESSURE OF PETROLEUM PRODUCTS
BS ISO 6855-1:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption General test requirements
NF EN ISO 10416 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING
DEFSTAN 91-76/1(1993) : 1993 GASOLINE AUTOMOTIVE, LEADED: CIVGAS (93 RON)
ISO 6855-1:2012 Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements
BS 2000-475(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-475: PETROLEUM LIQUIDS - MANUAL SAMPLING
BS EN ISO 3170:2004 Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling
BS EN ISO 13734:2013 Natural gas. Organic components used as odorants. Requirements and test methods
BS EN ISO 3830:1996 Petroleum products. Determination of lead content of gasoline. Iodine monochloride method
ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
BS 3324:1980 Method for determination of vapour pressure of liquefied petroleum gases (LPG method)

ISO 3170:2004 Petroleum liquids — Manual sampling
ISO 4256:1996 Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method

View more information
US$111.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.