• There are no items in your cart

ISO 3506-1:2009

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

04-06-2020

Language(s)

English, French

Published date

10-29-2009

ISO 3506-1:2009 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 C to 35 C. Properties vary at higher or lower temperatures.

ISO 3506-1:2009 applies to bolts, screws and studs

- with nominal thread diameter d 39 mm,

- of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and ISO 262, and

- of any shape.

It does not apply to screws with special properties, such as weldability.

DevelopmentNote
Supersedes ISO 3506 (04/2001) DRAFT ISO/DIS 3506-1 is also available for this standard. (11/2017)
DocumentType
Standard
Pages
27
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
DIN EN ISO 14581 E : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
03/319820 DC : DRAFT DEC 2003 EN 1515-3 - FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED
07/30159562 DC : 0 BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
UNI EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. EN ISO 2338:1998 PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL
CEI EN 50216-9 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
I.S. EN ISO 8739:1998 GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH PILOT
I.S. EN ISO 8744:1998 GROOVED PINS - FULL-LENGTH TAPER GROOVED
09/30202626 DC : 0 BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
MIL-PRF-32307 Revision A:2017 VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE
12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
16/30341810 DC : 0 BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
16/30341790 DC : 0 BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS
BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
BS EN 1090-5:2017 Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
10/30234610 DC : DRAFT NOV 2010 BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
DIN 16271:2004-07 PN 250 and PN 400 valves with test connection for pressure gauges
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
BS EN 50216-10:2009 Power transformer and reactor fittings Oil-to-air heat exchangers
UNE-EN ISO 12474:2011 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
PREN 50119 : DRAFT 2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
04/30113739 DC : DRAFT DEC 2004 EN ISO 13503-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 5: PROCEDURES FOR MEASURING THE LONG TERM CONDUCTIVITY OF PROPPANTS
BIS IS 2269 : 2006 HEXAGON SOCKET HEAD CAP SCREWS
NF EN ISO 12474 : 2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
UNE-EN 15048-1:2018 Non-preloaded structural bolting assemblies - Part 1: General requirements
I.S. EN ISO 28921-1:2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
13/30286967 DC : 0 BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
UNE-EN 15048-2:2017 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
UNE-EN ISO 12215-9:2013 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
UNI EN ISO 8676 : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
MSS SP 124 : 2016 FABRICATED TAPPING SLEEVES
BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements
IEC 60335-2-37:2017 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
I.S. EN 13480-2:2017 METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
I.S. EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
BS EN 13480-2:2017 Metallic industrial piping Materials
DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
DIN EN ISO 7045:2011-12 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
BS EN ISO 13628-1 : 2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
BS EN ISO 7089:2000 Plain washers. Normal series. Product grade A
BS EN ISO 4762:2004 Hexagon socket head cap screws
UNE-EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
BS EN ISO 7045:2011 Pan head screws with type H or type Z cross recess. Product grade A
I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN ISO 14579:2011 Hexalobular socket head cap screws
BS EN 1662:1998 Hexagon bolts with flange. Small series
BS EN 14420-3:2013 Hose fittings with clamp units Clamp units, bolted or pinned
I.S. EN ISO 21269:2004 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN ISO 2010:2011 SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
I.S. EN ISO 7045:2011 PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
I.S. EN ISO 4014:2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN EN ISO 4017:2015-05 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
UNI EN 12516-2 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
DIN EN ISO 15983:2003-04 OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - A2/A2
DIN EN ISO 16048:2003-06 PASSIVATION OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS
EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 12255-1:2002 Wastewater treatment plants - Part 1: General construction principles
ONORM EN 15001-1 : 2011 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
ONORM EN ISO 14581 : 2013 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
ONORM EN ISO 7380-1 : 2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
DIN EN ISO 14581:2014-02 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
DIN EN ISO 28921-1:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
IS 1367 : Part 1 : 2014 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br>
DIN EN 1662:1998-02 HEXAGON BOLTS WITH FLANGE, SMALL SERIES
09/30203245 DC : 0 BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B)
ISO 16228:2017 Fasteners — Types of inspection documents
11/30246933 DC : 0 BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING
I.S. EN ISO 7380-1:2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. EN ISO 8734:1998 PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS)
I.S. EN ISO 8735:1998 PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL
I.S. EN ISO 8741:1998 GROOVED PINS - HALF-LENGTH REVERSE-TAPER GROOVED
BS EN ISO 28921-1:2017 Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
09/30208217 DC : 0 BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
16/30339483 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
17/30341013 DC : DRAFT AUG 2017 BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN 3015-2:1999-01 Fastening clamps - Block clamps - Part 2: Heavy duty (S)
DIN EN 124-6:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
DIN 3015-1:1999-01 Fastening clamps - Block clamps - Part 1: Light duty (L)
BS EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
11/30249108 DC : 0 BS EN 12516-2 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
I.S. EN 593:2017 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
BS ISO 28921-1 : 2013 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
I.S. EN 50216-9:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
DIN 3015-3:1999-01 Fastening clamps - Block clamps - Part 3: Double clamps (Z)
ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
I.S. EN ISO 12215-9:2012 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
I.S. EN ISO 12474:2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN 15048-1:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
UNE-EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
PREN ISO 1207 : DRAFT 2009 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 12215-9 : 2012 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES
ISO 8992:2005 Fasteners — General requirements for bolts, screws, studs and nuts
UNI EN ISO 7048 : 2011 CROSS-RECESSED CHEESE HEAD SCREWS
I.S. EN 50216-10:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
I.S. EN 50216-12:2011 POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
DIN EN ISO 8765:2011-06 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
DIN EN ISO 8676:2011-07 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
UNE-EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
UNE-EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
ISO 7092:2000 Plain washers Small series Product grade A
UNE-EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
UNE-EN 12516-2:2016 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
BS EN ISO 8735:1998 Parallel pins with internal thread, of hardened steel or martensitic stainless steel
BS EN ISO 8740:1998 Grooved pins. Full-length parallel grooved, with chamfer
BS EN ISO 10440-2:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
BS EN 15048-1:2007 Non-preloaded structural bolting assemblies General requirements
BS EN ISO 8733:1998 Parallel pins with internal thread, of unhardened steel or austenitic stainless steel
UNE-EN ISO 2010:2012 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
BS EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
BS EN 1665:1997 Hexagon bolts with flange. Heavy series
I.S. EN 12516-2:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
I.S. EN ISO 14583:2011 HEXALOBULAR SOCKET PAN HEAD SCREWS
I.S. EN ISO 4762:2004 HEXAGON SOCKET HEAD CAP SCREWS
DIN EN ISO 7046-2:2011-12 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
DIN EN 14420-3:2013-09 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
I.S. EN ISO 8676:2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN 1993-1-4 : 2015 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN ISO 7047:2011 RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
I.S. EN ISO 7046-2:2011 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
I.S. EN ISO 13628-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
I.S. EN ISO 4017:2014 FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
I.S. EN ISO 14579:2011 HEXALOBULAR SOCKET HEAD CAP SCREWS
I.S. EN ISO 1580:2011 SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
I.S. EN 15048-2:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
I.S. EN ISO 14580:2011 HEXALOBULAR SOCKET CHEESE HEAD SCREWS
I.S. EN ISO 8765:2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
I.S. EN ISO 14584:2011 HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
I.S. EN 14420-3:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
I.S. EN ISO 1207:2011 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
I.S. EN ISO 2009:2011 SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)
I.S. EN ISO 7048:2011 CROSS-RECESSED CHEESE HEAD SCREWS
KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
ONORM EN ISO 8676 : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN ISO 4017 : 2015 FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
NF EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
NF EN ISO 8676 : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
NF EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ONORM EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
IEC 60335-2-36:2017 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
18/30351048 DC : 0 BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS
BS ISO 4162:2012 Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
I.S. EN ISO 16228:2018 FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
16/30341798 DC : 0 BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM
I.S. EN ISO 8742:1998 GROOVED PINS - ONE-THIRD-LENGTH CENTRE GROOVED
I.S. EN ISO 8743:1998 GROOVED PINS - HALF-LENGTH CENTRE GROOVED
BS EN ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
NF EN 50216-10 : 2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
15/30280562 DC : 0 BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
DIN ISO 8992:2005-09 Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
ONORM EN 1515-4 : 2010 FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG
17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
DIN EN 124-6 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
API RP 19D:2008/ERR 1:2008(R2015) MEASURING THE LONG-TERM CONDUCTIVITY OF PROPPANTS
ISO 4162:2012 Hexagon bolts with flange Small series Product grade A with driving feature of product grade B
ISO 12215-9:2012 Small craft Hull construction and scantlings Part 9: Sailing craft appendages
I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. EN 124-6:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
I.S. EN ISO 13918:2018 WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017)
ISO 15071:2011 Hexagon bolts with flange Small series Product grade A
UNI EN ISO 12474 : 2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
ONORM EN ISO 12215-9 : 2013 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017)
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
DIN EN ISO 7047:2011-12 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
DIN EN ISO 7048:2011-07 Cross-recessed cheese head screws (ISO 7048:2011)
UNE-EN ISO 4017:2015 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
DIN EN ISO 8765 E : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 7093-1:2000-11 PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A
DIN EN ISO 4762:2004-06 Hexagon socket head cap screws (ISO 4762:2004)
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN ISO 1580:2011-12 Slotted pan head screws - Product grade A (ISO 1580:2011)
ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
BS EN ISO 8739:1998 Grooved pins. Full-length parallel grooved, with pilot
BS EN ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread
UNE-EN ISO 1580:2012 Slotted pan head screws - Product grade A (ISO 1580:2011)
UNE-EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
BS EN ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head. A2/A2
ISO 8741:1997 Grooved pins Half-length reverse-taper grooved
ISO 16585:2002 Closed end blind rivets with pull mandrel and protruding head — A2/SSt
ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie
BS EN ISO 16585:2002 Closed end blind rivets with pull mandrel and protruding head. A2/SSt
BS EN ISO 7092:2000 Plain washers. Small series. Product grade A
ISO 7048:2011 Cross-recessed cheese head screws
IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
ISO 8743:1997 Grooved pins Half-length centre grooved
UNE-EN ISO 2009:2012 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
ISO 7090:2000 Plain washers, chamfered Normal series Product grade A
UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
ONORM EN 1090-2 : 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN ISO 8739 : 1997 GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH PILOT (ISO 8739:1997)
EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
UNI EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 14579 : 2011 HEXALOBULAR SOCKET HEAD CAP SCREWS
UNI EN ISO 13628-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
UNI EN ISO 2009 : 2012 SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 4017 : 2014 FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
UNI EN ISO 14580 : 2011 HEXALOBULAR SOCKET CHEESE HEAD SCREWS
EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
UNI EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
UNI EN 14219 : 2006 HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES
UNI EN ISO 7045 : 2012 PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNI EN ISO 2010 : 2012 SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 14583 : 2011 HEXALOBULAR SOCKET PAN HEAD SCREWS
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN ISO 1207 : 2012 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 7047 : 2012 RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNI EN ISO 1580 : 2012 SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 7046-2 : 2012 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS
UNI EN 14420-3 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
UNI EN ISO 14584 : 2011 HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
DIN 16272:2004-07 PN 250 and PN 400 valves with shut-off test connection for pressure gauges
UNI EN ISO 7380-1 : 2012 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
DIN EN ISO 7380-1:2011-11 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
ISO 13918:2017 Welding — Studs and ceramic ferrules for arc stud welding
11/30245512 DC : 0 BS ISO 15398 - SPECIFICATIONS FOR THERMOPLASTICS COVERS AND FRAMES FOR MANHOLES AND INSPECTION CHAMBERS USED IN NON-TRAFFIC AREAS
BS EN 50216-9:2009 Power transformer and reactor fittings Oil-to-water heat exchangers
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
I.S. EN ISO 8733:1998 PARALLEL PINS WITH INTERNAL THREAD, OF UNHARDENED STEEL OR AUSTENITIC STAINLESS STEEL
BIS IS 800 : 2007 AMD 1 2012 GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
08/30187521 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
09/30203242 DC : 0 BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A)
I.S. EN ISO 8740:1998 GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH CHAMFER
I.S. EN ISO 8745:1998 GROOVED PINS - HALF-LENGTH TAPER GROOVED
09/30188143 DC : DRAFT OCT 2009 BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
BS ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
UNI EN ISO 14581 : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS
14/30293325 DC : 0 BS EN ISO 15085 - SMALL CRAFT - MAN-OVERBOARD PREVENTION AND RECOVERY
BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
PREN 593 : DRAFT 2016 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
16/30342991 DC : 0 BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING
10/30214867 DC : 0 BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
BS EN ISO 7380-1:2011 Button head screws Hexagon socket button head screws
04/30123712 DC : DRAFT OCT 2004 EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: SUITABILITY TEST
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
04/30123693 DC : DRAFT OCT 2004 EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
DIN 19207:2004-02 Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories
DIN 16270:2004-07 PN 250 and PN 400 valves without test connection for pressure gauges
DIN EN 1515-4 E : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
DIN EN ISO 28921-1 E : 2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
BS EN ISO 12215-9:2012 Small craft. Hull construction and scantlings Sailing craft appendages
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
I.S. EN ISO 14581:2013 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
API 19D:2008 MEASURING THE LONG-TERM CONDUCTIVITY OF PROPPANTS
BS EN ISO 16228:2018 Fasteners. Types of inspection documents
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN ISO 12474:2011-01 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN ISO 12215-9:2012 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
UNE-EN ISO 14581:2016 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
ISO 4762:2004 Hexagon socket head cap screws
PREN 1992-4 : DRAFT 2013 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
IEC 60335-2-39:2012+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
BS EN 13480-2:2017+A3:2018 Metallic industrial piping Materials
EN ISO 13628-1:2005/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
DIN EN ISO 8734 E : 1998 PARALLEL PINS OF HARDENED STEEL AND MARTENSITIC STAINLESS STEEL (DOWEL PINS)
DIN EN 15048-1:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
DIN EN 15048-2:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
DIN EN ISO 2010:2011-12 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
DIN EN ISO 14584:2011-06 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
DIN EN ISO 8676 E : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 2009:2011-12 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
BS EN 1515-3:2005 Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated
UNE-EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
BS EN ISO 8744:1998 Grooved pins. Full-length taper grooved
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
ISO 28921-1:2013 Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing
BS EN ISO 4014:2011 Hexagon head bolts. Product grades A and B
BS EN ISO 3269:2001 Fasteners. Acceptance inspection
ISO 7045:2011 Pan head screws with type H or type Z cross recess Product grade A
UNE-EN ISO 7047:2012 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
ISO 3269:2000 Fasteners Acceptance inspection
ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
ISO 14579:2011 Hexalobular socket head cap screws
ISO 8733:1997 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
BS EN ISO 7090:2000 Plain washers, chamfered. Normal series. Product grade A
BS EN ISO 14584:2011 Hexalobular socket raised countersunk head screws
ISO 8744:1997 Grooved pins Full-length taper grooved
BS EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
BS EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread. Small series
BS EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread. Product grades A and B
BS EN ISO 8743:1998 Grooved pins. Half-length centre grooved
BS EN ISO 1207:2011 Slotted cheese head screws. Product grade A
BS EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners
UNE-EN ISO 7046-2:2012 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN 1515-2:2001 Flanges and their joints. Bolting Classification of bolt materials for steel flanges, PN designated
BS EN 15048-2:2007 Non-preloaded structural bolting assemblies Suitability test
ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
UNE-EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
BS EN ISO 7048:2011 Cross-recessed cheese head screws
IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
ISO 8742:1997 Grooved pins One-third-length centre grooved
ISO 8676:2011 Hexagon head screws with metric fine pitch thread Product grades A and B
ISO 7380-1:2011 Button head screws — Part 1: Hexagon socket button head screws
ISO 2009:2011 Slotted countersunk flat head screws Product grade A
ISO 13503-5:2006 Petroleum and natural gas industries Completion fluids and materials Part 5: Procedures for measuring the long-term conductivity of proppants
IEC 60335-2-99:2003+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
ISO 7093-1:2000 Plain washers Large series Part 1: Product grade A
BS EN ISO 8734:1998 Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)
ISO 4014:2011 Hexagon head bolts Product grades A and B
ISO 14581:2013 Fasteners — Hexalobular socket countersunk flat head screws
ISO 8734:1997 Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
BS EN ISO 8745:1998 Grooved pins. Half-length taper grooved
ISO 8745:1997 Grooved pins Half-length taper grooved
UNE-EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
ISO 8740:1997 Grooved pins Full-length parallel grooved, with chamfer
ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread
IEC 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
ISO 1207:2011 Slotted cheese head screws Product grade A
BS EN ISO 1580:2011 Slotted pan head screws. Product grade A
ISO 14580:2011 Hexalobular socket cheese head screws
BS EN ISO 4017:2014 Fasteners. Hexagon head screws. Product grades A and B
BS EN ISO 8742:1998 Grooved pins. One-third-length centre grooved
BS EN 12255-1:2002 Wastewater treatment plants General construction principles
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
ISO 1580:2011 Slotted pan head screws Product grade A
BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
ISO 8735:1997 Parallel pins with internal thread, of hardened steel and martensitic stainless steel
ISO 14583:2011 Hexalobular socket pan head screws
BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
BS EN 1515-1:2000 Flanges and their joints. Bolting Selection of bolting
BS EN ISO 14583:2011 Hexalobular socket pan head screws
ISO 7089:2000 Plain washers Normal series Product grade A
BS EN 12516-2:2014 Industrial valves. Shell design strength Calculation method for steel valve shells
UNE-EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
BS EN ISO 8741:1998 Grooved pins. Half-length reverse-taper grooved
ISO 8765:2011 Hexagon head bolts with metric fine pitch thread Product grades A and B
ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess Product grade A
BS EN ISO 14580:2011 Hexalobular socket cheese head screws
ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head — A2/A2
BS EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread. Product grades A and B
UNE-EN 14420-3:2014 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
DIN EN ISO 14579:2011-06 Hexalobular socket head cap screws (ISO 14579:2011)
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
EN ISO 7089 : 2000 PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A
EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
EN ISO 7045:2011 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
EN ISO 8734 : 1997 PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS) (ISO 8734:1997)
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
EN ISO 16585 : 2002 CLOSED END BLIND RIVETS WITH PULL MANDREL AND PROTRUDING HEAD - A2/SST
EN ISO 8735 : 1997 PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (ISO 8735:1997)
EN 1662:1997/AC:2007 HEXAGON BOLTS WITH FLANGE - SMALL SERIES (ISO/DIS 15071:1996, MODIFIED)
EN 1515-1:1999 Flanges and their joints - Bolting - Part 1: Selection of bolting
EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)
EN ISO 1580:2011 Slotted pan head screws - Product grade A (ISO 1580:2011)
ONORM EN 12516-2 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
EN ISO 15983 : 2002 OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD A2/A2
EN ISO 4762:2004 Hexagon socket head cap screws (ISO 4762:2004)
EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN 1515-2:2001 Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
EN ISO 7090 : 2000 PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000)
EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
EN ISO 7092 : 2000 PLAIN WASHERS - SMALL SERIES - PRODUCT GRADE A
EN ISO 7093-1 : 2000 PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000)
EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
EN ISO 7380-1:2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
EN ISO 8743 : 1997 GROOVED PINS - HALF-LENGTH CENTRE GROOVED (ISO 8743:1997)
EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
EN ISO 8745 : 1997 GROOVED PINS - HALF-LENGTH TAPER GROOVED (ISO 8745:1997)
EN 1515-3:2005 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
EN ISO 8741 : 1997 Grooved pins - Half-length reverse taper grooved (ISO 8741:1997)
EN ISO 14581:2013 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
EN ISO 15984 : 2002 OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD A2/A2
EN 1665:1997/AC:2007 HEXAGON BOLTS WITH FLANGE - HEAVY SERIES
EN ISO 8740 : 1997 GROOVED PINS - FULL-LENGTH PARALLEL GROOVED, WITH CHAMFER (ISO 8740:1997)
EN 14219:2003/AC:2007 HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES (ISO 15072:1999, modified)
EN ISO 2338 : 1997 PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL (ISO 2338:1997)
EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes
EN ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
EN ISO 8742 : 1997 GROOVED PINS - ONE-THIRD-LENGTH CENTRE GROOVED (ISO 8742:1997)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004)
EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
EN ISO 8744 : 1997 GROOVED PINS - FULL-LENGTH TAPER GROOVED (ISO 8744:1997)
EN 14420-3:2013 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
BS EN 50216-12:2011 Power transformer and reactor fittings Fans
PREN 14420-3 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
08/30193145 DC : 0 BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
UNE-EN ISO 7380-1:2012 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN ISO 14581:2013 Fasteners. Hexalobular socket countersunk flat head screws
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
NF EN ISO 7380-1 : 2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
UNE-EN ISO 28921-1:2018 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
DIN 19558:2002-12 WASTEWATER TREATMENT PLANTS - OUTLET INSTALLATIONS, WEIR AND SCUM BAFFLE, SUBMERGED EFFLUENT PIPES IN TANKS - CONSTRUCTION PRINCIPLES, MAIN DIMENSIONS, LAYOUT
DIN 3016-2:2000-06 FASTENING CLAMPS - PART 2: WITH FASTENING LUGS
16/30341794 DC : 0 BS EN 60335-2-48 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS
BS ISO 8992:2005 Fasteners. General requirements for bolts, screws, studs and nuts
DIN EN ISO 12215-9:2013-01 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
NF EN 50216-9 : 2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
UNE-EN 1090-3:2011 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
UNE-EN 50216-10:2010 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
CEI EN 50216-10 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
DIN EN 1515-3 E : 2005 FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED
DIN EN ISO 1207:2011-10 Slotted cheese head screws - Product grade A (ISO 1207:2011)
UNE-EN ISO 7045:2012 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
BS EN ISO 13503-5:2006 Petroleum and natural gas industries. Completion fluids and materials Procedures for measuring the long term conductivity of proppants
ISO 14584:2011 Hexalobular socket raised countersunk head screws
BS EN ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head. A2/A2
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
UNE-EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
ISO 2010:2011 Slotted raised countersunk head screws Product grade A
ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel
BS EN ISO 2009:2011 Slotted countersunk flat head screws. Product grade A
BS EN ISO 7093-1:2000 Plain washers. Large series Product grade A
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 2010:2011 Slotted raised countersunk head screws. Product grade A
BS EN ISO 2338:1998 Parallel pins of unhardened steel and austenitic stainless steel
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head — A2/A2
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
DIN EN ISO 15984:2003-04 OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - A2/A2
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
DIN EN ISO 14583:2011-06 Hexalobular socket pan head screws (ISO 14583:2011)
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN ISO 21269:2004-06 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
EN ISO 13503-5:2006 Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)
DIN EN ISO 4014:2011-06 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
DIN EN 1515-3:2005-12 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated
DIN EN ISO 14580:2011-06 Hexalobular socket cheese head screws (ISO 14580:2011)
EN 50216-10:2009 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
EN 50216-9:2009 Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers
UNE-EN 13480-2:2017 Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
ASME B18.2.5M : 2013 METRIC 12-POINT FLANGE HEAD SCREWS
UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
AS/NZS ISO 13918:2020 Welding - Studs and ceramic ferrules for arc stud welding
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 683-13:1974 Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
ISO 16426:2002 Fasteners — Quality assurance system
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
ISO 8044:2015 Corrosion of metals and alloys Basic terms and definitions
ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners
ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 261:1998 ISO general purpose metric screw threads General plan
AS 3996:2019 Access covers and grates
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
ISO 4954:1993 Steels for cold heading and cold extruding

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.