• There are no items in your cart

ISO 37:2017

Current
Current

The latest, up-to-date edition.

Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

11-10-2017

ISO 37:2017 specifies a method for the determination of the tensile stress-strain properties of vulcanized and thermoplastic rubbers.

The properties which can be determined are tensile strength, elongation at break, stress at a given elongation, elongation at a given stress, stress at yield and elongation at yield. The measurement of stress and strain at yield applies only to some thermoplastic rubbers and certain other compounds.

Committee
ISO/TC 45/SC 2
DevelopmentNote
Supersedes ISO/DIS 37. (11/2017)
DocumentType
Standard
Pages
30
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
NF ISO 37 : 2018 Identical
BS ISO 37:2011 Identical
NEN ISO 37 : 2017 Identical
IS 3400 : Part 1 : 2021 Identical
SANS 10037 : 2ED 2009 Identical
I.S. ISO 37:1986 Identical
NBN E 48 113 : 1988 Identical
NBN ISO 37 : 2003 Identical
PN ISO 37 : 2007 AC 2008 Identical
BIS IS 3400-1 : 2012 Identical
UNE-ISO 37:2013 Identical
GOST ISO 37 : 2013 Identical
BS ISO 37:2017 Identical

BS ISO 1658:2015 Natural rubber (NR). Evaluation procedure
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
BS EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
12/30250853 DC : 0 BS ISO 17357-2 - SHIPS AND MARINE TECHNOLOGY - FLOATING PNEUMATIC RUBBER FENDERS - PART 2: LOW PRESSURE
04/30113142 DC : DRAFT MAY 2004 ISO 6182-2 - FIRE PROTECTION. AUTOMATIC SPRINKLER SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR WET ALARM VALVES, RETARD CHAMBERS AND WATER MOTOR ALARMS
DIN EN 15502-2-1:2013-01 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
NF ISO 188 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
BS EN 60903:2003 Live working. Gloves of insulating material
BS 903-A44:1983 Physical testing of rubber Determination of resistance to ozone cracking (dynamic strain test)
99/123581 DC : DRAFT OCT 1999 ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS
09/30181563 DC : 0 BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
I.S. EN 15566:2016 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
BS ISO 3861 : 1995 AMD 9705 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
13/30265630 DC : 0 BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
02/123984 DC : DRAFT OCT 2002 BS ISO 2302 - ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES
BS EN 15566:2016 Railway applications. Railway rolling stock. Draw gear and screw coupling
BS ISO 24453:2008 Rubber. Acquisition and presentation of comparable single-point data
ISO 6182-12:2014 Fire protection Automatic sprinkler systems Part 12: Requirements and test methods for grooved-end components for steel pipe systems
ISO 6182-8:2006 Fire protection Automatic sprinkler systems Part 8: Requirements and test methods for pre-action dry alarm valves
VDE 0212-2 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BS ISO 19983:2017 Rubber. Determination of precision of test methods
ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 7: Lining with spirally-wound pipes
UNE-EN 15129:2011 Anti-seismic devices
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
07/30151253 DC : 0 BS ISO 25518 - DIPPED NATURAL-RUBBER GLOVES FOR MULTIPURPOSE APPLICATION - SPECIFICATION
13/30290552 DC : 0 BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
BS ISO 1817:2015 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
10/30201343 DC : 0 BS ISO 5794-3 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 3: EVALUATION PROCEDURES IN A MIXED SOLUTION OF STYRENE-BUTADIENE RUBBER AND BUTADIENE RUBBER
ISO 11759:1999 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification
BS EN 278:1991 Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
06/30146125 DC : 0 EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
13/30276381 DC : 0 BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS
07/30150928 DC : 0 BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
04/30113151 DC : DRAFT MAY 2004 ISO 6182-6 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES
04/30112805 DC : DRAFT APR 2004 BS EN ISO 15236-1 - STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE
15/30317657 DC : 0 BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification
BS EN 291:1992 Rubber seals. Static seals in domestic appliances for combustible gas up to 200 mbar. Specification for material
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
ISO 11659-2:2004 Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials
DIN EN 16820 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
BS ISO 2302:2014 Isobutene-isoprene rubber (IIR). Evaluation procedure
BS ISO 24454:2008 Rubber. Acquisition and presentation of comparable multi-point data
05/30130019 DC : DRAFT JULY 2005 BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION
DIN EN ISO 3821:2016-10 (Draft) GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
BS EN 60216-2:2005 Electrical insulating materials. Thermal endurance properties Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
BS EN 14840:2005 Joint fillers and sealants. Test methods for preformed joint seals
04/19970079 DC : DRAFT JULY 2004 BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - REQUIREMENTS AND TEST METHODS FOR GROOVED END PIPE COUPLINGS
99/104927 DC : DRAFT JUN 1999 PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS
04/30113148 DC : DRAFT MAY 2004 ISO 6182-5 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR DELUGE VALVES
PREN 13483 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
BS ISO 9631:2018 Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material
I.S. EN 62621:2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS
BS ISO 2475:2011 Chloroprene rubber (CR). General-purpose types. Evaluation procedure
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
UNI EN ISO 23936-2 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
CEI EN 60544-2 : 2013 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST
I.S. EN 15502-2-1:2012 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
09/30195768 DC : 0 BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
07/30144606 DC : 0 ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANISATION - EQUIPMENT AND PROCEDURES
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
I.S. EN ISO 14607:2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018)
ASTM D 6324 : 2011 : R2017 Standard Specification for Male Condoms Made from Polyurethane
ISO 6072:2011 Rubber Compatibility between hydraulic fluids and standard elastomeric materials
BS ISO 13226:2011 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 4659:2014 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) Evaluation procedure
I.S. EN ISO 18797-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
ISO 20057:2017 Rubber household gloves — General requirements and test methods
ISO 4639-1:1987 Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels
I.S. EN ISO 8029:2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
BS ISO 1431-1:2012 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Static and dynamic strain testing
CSA C22.2 No. 62282-2 : 2007 : R2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
I.S. EN ISO 20029-2:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
NF ISO 13226 : 2011 RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
ISO 22762-1:2010 Elastomeric seismic-protection isolators Part 1: Test methods
UNI EN ISO 12311 : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR
ISO 11601:2017 Fire fighting — Wheeled fire extinguishers — Performance and construction
ONORM EN ISO 14607 : 2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
DIN EN 15129:2010-06 ANTI-SEISMIC DEVICES
I.S. EN ISO 11296-7:2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
ISO 14607:2007 Non-active surgical implants Mammary implants Particular requirements
I.S. EN ISO 3821:2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
UNE-EN 16436-1:2014 Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
ISO 17464:2016 Pneumatic tubes for automotive vehicles Technical requirements and test methods
ISO 16037:2002 Rubber condoms for clinical trials Measurement of physical properties
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
I.S. EN ISO 1403:2008 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
DIN EN 14241-1:2013-11 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
DIN EN ISO 15236-1:2016-06 (Draft) STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE (ISO 15236-1:2016)
DIN EN ISO 15236-3:2016-10 (Draft) STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017)
DIN EN 13483:2013-09 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
DIN EN 26:2015-08 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 549:1995 Specification for rubber materials for seals and diaphragms for gas appliances and gas equipment
BS EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen. Specification
BS EN 12806:2003 Automotive liquefied petroleum gas components. Other than containers
BS EN ISO 15236-3:2017 Steel cord conveyor belts Special safety requirements for belts for use in underground installations
BS EN 559:2003 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
BS EN 681-2:2000 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
BS EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam. Specification
BS EN ISO 14890:2013 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
BS EN 14241-1:2013 Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications
BS EN ISO 5774:2016 Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
BS EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components
DIN EN 1361:1997-08 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
I.S. EN 89:2015 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 13787:2002-04 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 12259-5:2002 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
DIN EN ISO 15236-1:2017-03 STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE (ISO 15236-1:2016)
EN 12806:2003 Automotive liquefied petroleum gas components - Other than containers
EN 1123-1:1999/A1:2004 PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL
DIN EN 559:2003-08 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
DIN EN 15502-2-1:2017-09 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016)
DIN EN ISO 11296-7:2013-05 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
DIN EN 15551:2011-01 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
NBR 15880 : 2010 DUCTILE IRON FITTINGS AND ACCESSORIES FOR PIPES OF PVC 6,3 AND POLIETILENE PE - REQUIREMENTS
NBR 15803 : 2010 ERRATA 2010 PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR MECHANICAL JOINT COMPRESSION FITTINGS, BRANCH SADDLES AND TAPPING TEE FOR POLYETHYLENE (PE) PIPES FOR NOMINAL OUTSIDE DIAMETERS BETWEEN 20 MM AND 160 MM, WITH MAXIMUM OPERATION PRESSURE UP TO 1.6 MPA
ONORM EN ISO 22721 : 2009 CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR UNDERGROUND MINING
NBR 15750 : 2009 PVC-O (ORIENTED UNPLASTICISED POLYVINYL CHLORIDE) PIPING SYSTEMS FOR THE CONVEYANCE OF WATER OR SEWAGE UNDER PRESSURE - REQUIREMENTS AND TEST METHODS
BS 903-A19(1998) : 1998 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
ASME BPE : 2016 BIOPROCESSING EQUIPMENT
UNI EN ISO 3861 : 2009 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
ISO 14448:2016 Low modulus adhesives for exterior tile finishing
03/310327 DC : DRAFT SEP 2003 BS 5120 - RUBBER HOSES FOR GAS WELDING, CUTTING AND ALLIED PROCESSES - HIGH KINK RESISTANT WELDING HOSE (TYPE H) - SPECIFICATION
BS ISO 2023:1994 Rubber footwear. Lined industrial vulcanized-rubber boots. Specification
DIN EN 16436-1:2016-04 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
BS EN 279:1991 Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar
BS ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels
BS EN 61854:1998 Overhead lines. Requirements and tests for spacers
11/30244908 DC : 0 BS EN ISO 3994 - PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION
03/308001 DC : DRAFT JUNE 2003 ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
BS ISO 5892:2013 Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
BIS IS 8504-2 : 2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
05/30137367 DC : DRAFT JUL 2005 ISO 2321 - RUBBER THREADS - METHOD OF TEST
14/30285784 DC : 0 BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS
BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures
ENA TS 09-13 : ISSUE 1 AMD 1 1993 PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPES CABLES UP TO AND INCLUDING 33000 VOLTS
14/30280554 DC : 0 BS ISO 14448 - LOW MODULUS ADHESIVES FOR EXTERIOR TILE FINISHING
I.S. EN 60544-4:2003 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
PD ISO/TS 16096:2014 Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure
NF EN 60903 : 2004 SPECIFICATION FOR GLOVES AND MITTS OF INSULATING MATERIAL FOR LIVE WORKING
I.S. EN 483:2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
ONORM EN ISO 1403 : 2010 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
14/30267388 DC : 0 BS EN 62677-2 ED 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
BS ISO 3601-5:2015 Fluid power systems. O-rings Specification of elastomeric materials for industrial applications
10/30212482 DC : 0 BS ISO 4658 - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - EVALUATION PROCEDURE
12/30256960 DC : 0 BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
ISO 3821:2008 Gas welding equipment Rubber hoses for welding, cutting and allied processes
PREN 681-1 : DRAFT 2016 ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
05/30129278 DC : DRAFT FEB 2005 ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
14/30255646 DC : 0 BS ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE
BS ISO 3384-2:2012 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing with temperature cycling
BS ISO 6943:2017 Rubber, vulcanized. Determination of tension fatigue
ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) Evaluation procedure
BS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
NF EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
11/30231429 DC : 0 BS ISO 3384-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 2: WITH TEMPERATURE CYCLING
DIN EN ISO 22721:2010-01 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007)
UNE-ISO 3384-1:2017 Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature
01/122581 DC : DRAFT JUNE 2001 BS PREN 1361 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
BS ISO 2398 : 1995 AMD 9704 RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
BS ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
15/30304408 DC : 0 BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
07/30090853 DC : 0 BS ISO 1658 - NATURAL RUBBER (NR) - EVALUATION PROCEDURE
02/122571 DC : DRAFT JUN 2002 ISO/DIS 2302 - ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES
11/30212449 DC : 0 BS ISO 1431-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 1: STATIC AND DYNAMIC STRAIN TESTING
ISO 2322:2014 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
14/30301115 DC : 0 BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels
DIN EN ISO 1403:2010-04 RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
10/30167702 DC : 0 BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION
ISO 2303:2011 Isoprene rubber (IR) Non-oil-extended, solution-polymerized types Evaluation procedures
BS ISO 2476:2014 Butadiene rubber (BR). Solution-polymerized types. Evaluation procedures
10/30212479 DC : 0 BS ISO 2475 - CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE
BS ISO 17357-2:2014 Ships and marine technology. Floating pneumatic rubber fenders Low pressure
15/30293925 DC : 0 BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION
11/30250546 DC : 0 BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
PREN 549 : DRAFT 2017 RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
05/30127634 DC : DRAFT JAN 2005 PREN 13566-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NONPRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY WOUND UNPLASTICIZED POLY (VINYLE CHLORIDE) (PVC-U) PIPES
BS EN ISO 22721:2007 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
UNI 7140 : 2013 GAS APPLIANCES FOR DOMESTIC USE - NON-METALLIC FLEXIBLE HOSES FOR GAS APPLIANCES FOR DOMESTIC USE AND SIMILAR
04/30113145 DC : DRAFT MAY 2004 ISO 6182-3 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR DRY PIPE VALVES
PREN 14241-1 : DRAFT 2011 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
ISO 2302:2014 Isobutene-isoprene rubber (IIR) Evaluation procedure
BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
BS 8451:2004 Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
NF EN 61854 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
PREN 4594 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
UNE-ISO 13226:2017 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
BS EN 62621 : 2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS (IEC 62621:2011)
I.S. EN ISO 12311:2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
ISO 3384-1:2011 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature
ISO 22654:2002 Footwear — Test methods for outsoles — Tensile strength and elongation
ISO 4195:2012 Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods
BS ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels
PREN 4691-1 : DRAFT 2015 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
I.S. EN 1279-4:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEALS
ISO 17357-2:2014 Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure
BS ISO 3384-1 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
ISO 20029-2:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
I.S. EN IEC 62677-2:2018 HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
CEI EN 61854 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
I.S. EN 60903:2003 LIVE WORKING - GLOVES OF INSULATING MATERIAL
I.S. EN 16436-1:2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
ISO 20492-4:2010 Glass in buildings — Insulating glass — Part 4: Methods of test for the physical attributes of edge seals
ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances General requirements
ISO 6448:1985 Rubber seals Joint rings used for petroleum product supply pipes and fittings Specification for material
BS EN 15129:2009 Anti-seismic devices
BS EN 1279-4:2002 Glass in building. Insulating glass units Methods of test for the physical attributes of edge seals
BS EN ISO 14607:2009 Non-active surgical implants. Mammary implants. Particular requirements
ISO 2476:2014 Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures
UNI EN ISO 14607 : 2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
ISO 24454:2008 Rubber Acquisition and presentation of comparable multi-point data
I.S. EN ISO 23936-2:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011)
NF EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
UNI EN 16091 : 2012 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 16436-1 : 2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
UNI EN 15129 : 2009 ANTI-SEISMIC DEVICES
EN 1279-4:2002 Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals
I.S. EN ISO 12736:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)
EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
ISO 25518:2009 Single-use rubber gloves for general applications Specification
EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
EN 16436-1:2014+A1:2015 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
ISO 9940:2015 Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification
BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
NF EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
ISO 6943:2017 Rubber, vulcanized Determination of tension fatigue
ISO 4632-1:1982 Rubber, vulcanized Classification Part 1: Description of the classification system
DIN EN 14879-5 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS
DIN EN 89:2015-08 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 13482:2013-12 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
DIN EN 1337-3:2005-07 Structural bearings - Part 3: Elastomeric bearings
DIN EN ISO 14890:2013-06 CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR GENERAL USE (ISO 14890:2013)
UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
BS EN 377:1993 Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
BS EN 26:1998 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
ISO 14890:2013 Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
BS EN ISO 3861:2008 Rubber hoses for sand and grit blasting. Specification
EN 61854:1998 Overhead lines - Requirements and tests for spacers
ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam — Specification
UNE-EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
DIN EN 681-1:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
I.S. EN ISO 15236-3:2017 STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017)
EN 15807:2011 Railway applications - Pneumatic half couplings
I.S. EN 13483:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
I.S. EN ISO 527-2:2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS (ISO 527-2:2012)
I.S. EN ISO 3861:2008 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
DIN EN 1361:2004-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
I.S. EN ISO 15136-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
I.S. EN ISO 1401:2016 RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016)
EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
I.S. EN 62282-2:2012 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV))
I.S. EN ISO 5774:2016 PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016)
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN ISO 2398:2016 RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016)
EN ISO 3861:2008 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
I.S. EN 26:2015 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
I.S. EN ISO 6807:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION
I.S. EN 12115:2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
DIN EN ISO 2398:2010-04 RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016)
DIN EN ISO 3821:2010-07 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
I.S. EN ISO 3994:2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
I.S. EN ISO 15236-1:2016 STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE (ISO 15236-1:2016)
I.S. EN ISO 6134:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
I.S. EN 14241-1:2013 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
CEI EN 62282-2 : 2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
I.S. EN 1621-2:2014 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 2: MOTORCYCLISTS' BACK PROTECTORS - REQUIREMENTS AND TEST METHODS
I.S. EN 1360:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
I.S. EN 13787:2002 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
I.S. EN ISO 5771:2008 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
I.S. EN 13482:2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
DIN EN 681-4:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
DIN 53504:2009-10 TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST
DIN EN 681-3:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
DIN EN 1763-1:2001-04 RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES
DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
I.S. EN ISO 6806:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017)
BS 5474:1991 Method for evaluation of non-oil-extended solution-polymerized isoprene rubber (IR)
ONORM EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
BS 6064:1992 Method for evaluation of acrylonitrile-butadiene rubber (NBR)
BS 903-A16:1987 Physical testing of rubber Determination of the effect of liquids
I.S. EN 12806:2003 AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS
BS 903-A44:1995 Physical testing of rubber Method of determination of resistance to ozone cracking (dynamic strain test)
BS 4832:1987 Specification for compatibility between elastomeric materials and hydraulic fluids
BS 903-A16(1999) : 1999 RUBBER, VULCANIZED - DETERMINATION OF THE EFFECT OF LIQUIDS
BS 6063:1992 Method for evaluation of general purpose ethylene-propylene-diene rubber (EPDM)
BS 5691-2:1995 Guide for the determination of thermal endurance properties of electrical insulating materials Choice of test criteria
BS 4470:1987 Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)
BS 5375:1992 Method for evaluation of general purpose chloroprene rubber (CR)
BS 903-A42:1992 Physical testing of rubber Method for determination of stress relaxation in compression at ambient and at elevated temperatures
BS 4470:1996 Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)
CEI EN 60903 : 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI
12/30234431 DC : 0 BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS
BS EN 15807:2011 Railway applications. Pneumatic half couplings
ONORM EN ISO 3861 : 2010 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
15/30315105 DC : 0 BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER
ISO 9475:1994 Aircraft inner tube and tubeless tyre valves Cores and caps Test methods
BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures
ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
06/30150431 DC : DRAFT MAY 2006 ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE
14/30295535 DC : 0 BS ISO 5794-2 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 2: EVALUATION PROCEDURES IN STYRENE-BUTADIENE RUBBER
BS ISO 6446:1994 Rubber products. Bridge bearings. Specification for rubber materials
03/118042 DC : DRAFT NOV 2003 EN 14840 - JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
BS EN ISO 8029:2014 Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
BS ISO 4195:2012 Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
ISO 4925:2005 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
BS EN 4595:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance
BS ISO 2322:2014 Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures
PD ISO/TS 16097:2013 Vulcanized crumb rubber. Evaluation procedures
07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
DIN EN 16820:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
15/30317645 DC : 0 BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION
ISO 29942:2011 Prophylactic dams — Requirements and test methods
ISO 3934:2002 Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods
UNI EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
97/109272 DC : DRAFT DEC 1997 PREN 13063 - CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS OR BLOCKS
10/30219184 DC : 0 BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
11/30244915 DC : 0 BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
BS EN 60544-2:2012 Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test
11/30214913 DC : 0 BS ISO 6182-2 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR WET ALARM VALVES, RETARD CHAMBERS AND WATER MOTOR ALARMS
DIN EN 61854 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
DIN EN 1360:2013-09 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
16/30328642 DC : 0 BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 12: REQUIREMENTS AND TEST METHODS FOR GROOVED-END COMPONENTS FOR STEEL PIPE SYSTEMS
05/30128222 DC : DRAFT JAN 2005 ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
10/30196881 DC : 0 BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
BS ISO 2321:2017 Rubber threads. Methods of test
15/30317651 DC : 0 BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
BS 5293-20:1992 Sampling and testing carbon black for use in the rubber industry Method for evaluation in styrene-butadiene rubbers
14/30258642 DC : 0 BS ISO 17464 - PNEUMATIC TUBES FOR AUTOMOTIVE VEHICLES - TECHNICAL REQUIREMENTS AND TEST METHODS
08/30176905 DC : DRAFT JAN 2008 BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
03/105600 DC : DRAFT MAY 2003 BS ISO 1431-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 1: STATIC AND DYNAMIC STRAIN TESTING
13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/30125408 DC : DRAFT MAR 2005 EN ISO 15236-3 - STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS
14/30295541 DC : 0 BS ISO 4659 - STYRENE-BUTADIENE RUBBER (CARBON BLACK OR CARBON BLACK AND OIL MASTERBATCHES) - EVALUATION PROCEDURE
08/30190043 DC : DRAFT SEP 2008 BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION
BS ISO 20057:2017 Rubber household gloves. General requirements and test methods
BS ISO 4925:2005 Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems
BS ISO 14409 : 2013 SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS
16/30334966 DC : 0 BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
UNE-ISO 2393:2013 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
03/304727 DC : DRAFT OCT 2003 ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
PD CEN/TR 15990:2010 Data sheets. Footwear tests materials and test adhesives
BS ISO 14448:2016 Low modulus adhesives for exterior tile finishing
04/30113154 DC : DRAFT MAY 2004 ISO 6182-8 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR PRE-ACTION DRY ALARM VALVES
UNI EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
BS ISO 6224 : 1995 AMD 9706 PLASTIC HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
BS ISO 18488:2015 Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method
03/106442 DC : DRAFT APR 2003 ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS
13/30279826 DC : 0 BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
06/30130353 DC : DRAFT MAY 2006 ISO 6943 - RUBBER, VULCANIZED - DETERMINATION OF TENSION FATIGUE
BIS IS 3400-4 : 2012 METHODS OF TEST FOR VULCANIZED RUBBER - PART 4: ACCELERATED AGEING AND HEAT RESISTANCE
BS ISO 7663:2014 Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures
04/30112025 DC : DRAFT APR 2004 ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
14/30295544 DC : 0 BS ISO 7663 - HALOGENATED ISOBUTENE-ISOPRENE RUBBER (BIIR AND CIIR) - EVALUATION PROCEDURES
UNE-EN ISO 4641:2017 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)
BS ISO 6072:2011 Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
DIN EN 16436-1 E : 2016 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
17/30355087 DC : 0 BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
DIN EN ISO 8029:2014-12 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
BS EN 60684-2:2011 Flexible insulating sleeving Methods of test
08/30176630 DC : DRAFT JAN 2008 BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION AND SOLUTION POLYMERIZED TYPES - EVALUATION PROCEDURES
07/30161675 DC : 0 BS ISO 24454 - PHYSICAL TESTING OF RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE MULTI-POINT DATA
02/121978 DC : DRAFT APR 2002 ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS
07/30145313 DC : 0 BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION
17/30347025 DC : 0 BS EN 15129 - ANTI-SEISMIC DEVICES
PREN 3624 : 200P1 AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION
DIN EN ISO 11296-7 E : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
DIN EN ISO 12311:2015-06 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
UNE-EN 15807:2011 Railway applications - Pneumatic half couplings
18/30363978 DC : 0 BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
NF ISO 14409 : 2011 SHIPS AND MARINE TECHNOLOGY - SHIP LAUNCHING AIR BAGS
NF ISO 6072 : 2012 RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
CEN/TR 15990:2010/AC:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
ISO 13226:2011 Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ONORM EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
I.S. EN 60544-2:2012 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV))
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
BS ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
I.S. EN 4595:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
I.S. EN 4691-1:2017 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
UNI EN 4594 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
I.S. EN 60455-2:2015 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN 61854:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BS EN 15502-2-1 : 2012 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
I.S. EN ISO 22721:2007 CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR UNDERGROUND MINING
BS ISO 2303:2011 Isoprene rubber (IR). Non-oil-extended, solution-polymerized types Evaluation procedures
I.S. ISO 1817:1986 RUBBER, VULCANIZED - DETERMINATION OF THE EFFECT OF LIQUIDS
UNI ISO 2303 : 2012 ISOPRENE RUBBER (IR) - NON-OIL-EXTENDED, SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
ISO 17357:2002 Ships and marine technology High-pressure floating pneumatic rubber fenders
BS EN ISO 11296-7:2013 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
ISO 1403:2005 Rubber hoses, textile-reinforced, for general-purpose water applications Specification
I.S. EN 279:1992 HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR
EN 15129:2018 (edition 2) Anti-seismic devices
EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
NF EN ISO 14607 : 2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
ISO 24453:2008 Rubber Acquisition and presentation of comparable single-point data
UNI EN ISO 8029 : 2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
UNI ISO 3384-1 : 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
ASTM F 958 : 1985 : R1990 Practice for Developing Guides for Using Consumer Products (Withdrawn 1993)
NF ISO 2475 : 2011 CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE
ISO 14409:2011 Ships and marine technology — Ship launching air bags
ISO 3384-2:2012 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 2: Testing with temperature cycling
ISO 10282:2014 Single-use sterile rubber surgical gloves — Specification
ONORM EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures
ISO/TR 12245:1994 Carbon blacks used in rubber products Classification system
ISO 11193-1:2008 Single-use medical examination gloves Part 1: Specification for gloves made from rubber latex or rubber solution
ISO/TS 16095:2014 Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure
ISO 6447:1983 Rubber seals Joint rings used for gas supply pipes and fittings Specification for material
ISO 16010:2005 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
ISO 7663:2014 Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures
ISO 6182-6:2006 Fire protection Automatic sprinkler systems Part 6: Requirements and test methods for check valves
ISO 4195-1:1987 Conveyor belts — Heat resistance — Part 1: Test method
IEC 60903:2014 Live working - Electrical insulating gloves
ISO 9631:2018 Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
I.S. EN ISO 4641:2016 RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016)
DIN EN 14188-3:2006-04 Joint fillers and sealants - Part 3: Specifications for preformed joint seals
DIN EN 13566-7:2007-06 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
DIN EN ISO 6807:2004-08 Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003)
DIN EN 681-1:2016-07 (Draft) Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016
DIN EN ISO 3861:2010-04 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
DIN EN 682:2006-10 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
DIN EN ISO 3994:2015-11 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
DIN EN 1337-3 E : 2005 STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
DIN EN 12115:2011-04 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 681-4:2000 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
IEC 62329-2:2006 Heat-shrinkable moulded shapes - Part 2: Methods of test
BS EN 1763-1:2001 Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses
ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear
BS EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
ISO 1401:2016 Rubber hoses for agricultural spraying
UNE-ISO 1431-1:2017 Rubber, vulcanised or thermoplastic. Resistance to ozone cracking. Part 1: Static and dynamic strain testing
ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners — Specification
IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
BS EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control
UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
EN ISO 22721:2007 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007)
EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
UNI EN ISO 5771 : 2009 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
EN 483:1999/A4:2007 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
UNI EN 1621-2 : 2014 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - MOTORCYCLISTS' BACK PROTECTORS - PART 2: REQUIREMENTS AND TEST METHODS
EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
UNI EN 14241-1 : 2013 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
UNI EN ISO 1403 : 2009 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
UNI EN 13482 : 2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI ISO 1431-1 : 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 1: STATIC AND DYNAMIC STRAIN TESTING
UNI EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 1360 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
UNI EN ISO 3994 : 2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION
UNI EN ISO 527-2 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS
UNI EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
UNI EN ISO 14890 : 2013 CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR GENERAL USE
CEI EN 62329-2 : 2007 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
UNI ISO 2393 : 2014 RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES
ISO 1431-2:1994 Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 2: Dynamic strain test
I.S. EN 15807:2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
CGSB-20.25 : M91 STERILE SURGICAL RUBBER GLOVES, DISPOSABLE
UNI ISO 3384 : 2009 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES
12/30235141 DC : 0 BS ISO 5892 - RUBBER BUILDING GASKETS - MATERIALS FOR PREFORMED SOLID VULCANIZED STRUCTURAL GASKETS - SPECIFICATION
BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
BS ISO 9940:2015 Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification
BS 903-3:2003 Physical testing of rubber Acquisition and presentation of comparable single-point data
99/540206 DC : 0 EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE VALVES
12/30265702 DC : 0 BS ISO 10247 - CONVEYOR BELTS - CHARACTERISTICS OF COVERS - CLASSIFICATION
BS ISO 5794-3:2011 Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
BS EN ISO 12736:2014 Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
BS EN 60544-4:2003 Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments
BS EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
PD ISO/TS 16095:2014 Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure
SAE J 2028 : 2016 FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS
I.S. EN 1361:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
I.S. EN 60684-2:2011 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
10/30218935 DC : 0 BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
UNI ISO 2322 : 2014 STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
UNI ISO 188 : 2012 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
BS EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers
12/30264198 DC : 0 BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
11/30214916 DC : 0 BS ISO 6182-3 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR DRY PIPE VALVES
BS EN 4594:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance
NF ISO 16037 : 2002 RUBBER CONDOMS FOR CLINICAL TRIALS - MEASUREMENT OF PHYSICAL PROPERTIES
BS C 22:1995 Test methods for aircraft inner tube and tubeless tyre valves. Cores and caps
ESI 09-13 : ISSUE 1 PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPE CABLES UP TO AND INCLUDING 33000 VOLTS
DIN EN 15551 E : 2011 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
NF ISO 3384-1 : 2012 AMD 1 2013 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE
08/30156909 DC : DRAFT APR 2008 BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
11/30250273 DC : 0 BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
05/30130302 DC : DRAFT MAR 2005 ISO 22721 - CONVEYOR BELTS - SPECIFICATION FOR RUBBER OR PLASTICS COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR UNDERGROUND MINING
14/30302298 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
13/30290460 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
18/30369393 DC : 0 BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
BS IEC 61942:1997 Live working. Gloves and mitts with mechanical protection
10/30214883 DC : 0 BS ISO 14409 - SHIPS AND MARINE TECHNOLOGY - SHIPS LAUNCHING AIR BAG
DIN EN 16730:2016-09 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS
BS AU 174-2:1985 Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles Specification for non-petroleum base brake fluid
DIN ISO 13226:2015-12 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
BS ISO 4659:2014 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
BS ISO 5794-2:2014 Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in styrene-butadiene rubber
07/30161672 DC : 0 BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
BS 6893-2:1987 Flexible insulating sleeving for electrical purposes Methods of test
08/30183539 DC : DRAFT JUNE 2008 BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
11/30215333 DC : 0 BS ISO 6182-5 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR DELUGE VALVES
BS ISO 17464:2016 Pneumatic tubes for automotive vehicles. Technical requirements and test methods
DIN EN 14840 E : 2005 JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
13/30265627 DC : 0 BS ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES
13/30265633 DC : 0 BS ISO 2476 - BUTADIENE RUBBER (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
BIS IS 3400-6 : 2012 METHODS OF TEST FOR VULCANIZED RUBBER - PART 6: DETERMINATION OF THE EFFECT OF LIQUIDS
13/30241415 DC : 0 BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
09/30200633 DC : 0 BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION
17/30334044 DC : 0 BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
BS ISO 9026:2007 Raw rubber or unvulcanized compounds. Determination of green strength
BS ISO 25518:2009 Single-use rubber gloves for general applications. Specification
IEC 60544-4:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
BS EN ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge. Specification
04/30110371 DC : 0 ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION
ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels
NF ISO 10247 : 1991 AMD 1 2006 CONVEYOR BELTS - CHARACTERISTICS OF COVERS - CLASSIFICATION
BS ISO 19003:2006 Rubber and rubber products. Guidance on the application of statistics to physical testing
01/106321 DC : DRAFT AUG 2001 PREN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
03/300797 DC : DRAFT JAN 2003 EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION
ISO 17357-1:2014 Ships and marine technology — Floating pneumatic rubber fenders — Part 1: High pressure
PREN 3207 : 1996 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
ISO 5794-2:2014 Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber
DIN EN 549:1995-04 RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
DIN EN 1762:2016-09 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
17/30328799 DC : 0 BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
16/30318653 DC : 0 BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
I.S. EN ISO 14910-2:2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification
ISO 19983:2017 Rubber — Determination of precision of test methods
ISO 14910-2:2013 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
ISO/TS 16097:2013 Vulcanized crumb rubber — Evaluation procedures
ISO 4633:2015 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
ISO 2023:1994 Rubber footwear Lined industrial vulcanized-rubber boots Specification
ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification
BS ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
CEI EN 60216-2 : 2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
18/30365845 DC : 0 BS EN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 2321:2017 Rubber threads — Methods of test
PREN 13482 : DRAFT 2012 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
UNE-EN 15551:2017 Railway applications - Railway rolling stock - Buffers
ISO 16365-2:2014 Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
ISO 5892:2013 Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification
ISO 3601-5:2015 Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications
EN ISO 11296-7:2013 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
PREN 1762 : DRAFT 2018 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
EN ISO 14607:2018 Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08)
ISO 23711:2003 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
I.S. EN 1762:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
I.S. EN ISO 1825:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017)
IEC 62677-2:2017 Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test
IEC 61942:1997 Live working - Gloves and mitts with mechanical protection
S.R. CEN TR 15990:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
IEC 61854:1998 Overhead lines - Requirements and tests for spacers
DIN EN ISO 6806:2015-08 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017)
UNE-EN ISO 14910-2:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
DIN EN ISO 14910-2 E : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
DIN EN ISO 5771:2009-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION
BS EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air. Specification
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
BS ISO 11601:2017 Fire fighting. Wheeled fire extinguishers. Performance and construction
ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge Specification
IEC 62621:2011 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
UNE-EN ISO 15236-1:2017 Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)
UNE-EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
BS EN 1361:2004 Rubber hoses and hose assemblies for aviation fuel handling. Specification
BS EN 1621-2:2003 Motorcyclists\' protective clothing against mechanical impact Motorcyclists back protectors. Requirements and test methods
BS EN 13566-7:2007 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air Specification
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
UNE-EN ISO 1401:2017 Rubber hoses for agricultural spraying (ISO 1401:2016)
UNE-EN ISO 3821:2011 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
UNE-EN 62621:2016 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
BS EN 681-3:2000 Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber
11/30242646 DC : DRAFT FEB 2011 BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
BS EN ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification
BS EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners. Specification
IEC 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
ISO 18488:2015 Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
BS EN 14188-3 : 2005 JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS
IEC 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
ISO 22721:2007 Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
UNE-EN 13482:2014 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
ISO 3994:2014 Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification
ISO 3384:2005 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures
IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
ISO 3861:2005 Rubber hoses for sand and grit blasting Specification
03/112565 DC : DRAFT AUG 2003 ISO 6182-9 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEM - PART 9: REQUIREMENTS AND TEST METHODS FOR WATER MIST NOZZLES
BS EN 1337-3:2005 Structural bearings Elastomeric bearings
ISO 15236-1:2016 Steel cord conveyor belts Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
IEC 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
BS EN 12259-5:2002 Fixed firefighting systems. Components for sprinkler and water spray systems Water flow detectors
BS EN 483 : 2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
BS EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia Specification
ISO 6182-9:2005 Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles
BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
ISO 15236-3:2017 Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations
BS EN ISO 15236-1:2016 Steel cord conveyor belts Design, dimensions and mechanical requirements for conveyor belts for general
BS EN 682:2002 Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
ISO 12736:2014 Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
UNE-EN 1621-2:2014 Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods
BS EN ISO 1403:2008 Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
UNE-EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
UNE-EN 89:2016 Gas-fired storage water heaters for the production of domestic hot water
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
BS EN ISO 1401:2016 Rubber hoses for agricultural spraying
UNE-EN 26:2016 Gas-fired instantaneous water heaters for the production of domestic hot water
ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification
BS EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
BS EN 3207:1998 Rubber compounds. Technical specification
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
BS EN 62282-2:2012 Fuel cell technologies Fuel cell modules
UNE-EN ISO 2398:2017 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
BS EN 4691-1:2017 Aerospace series. Tie rod with integrated bolts Technical specification
UNE-EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 681-4:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS
EN 14188-3 : 2006 JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS
EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
EN ISO 3821:2010 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
EN 1327:1996 Gas welding equipment - Thermoplastic hoses for welding and allied processes
EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
EN 14840 : 2005 JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
EN ISO 6807 : 2003 RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION
EN ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016)
EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery - Specification
EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011)
EN 681-3:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER
EN ISO 15236-1:2016 Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)
EN 559 : 2003 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
EN 4594:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
EN ISO 15236-3:2017 Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017)
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN ISO 12311 : 2013 COR 2014 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
EN ISO 1403:2008 Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005)
EN 1361 : 2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
EN 15502-2-1:2012+A1:2016 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
EN 682:2002/A1:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
EN ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008)
EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
EN ISO 3994:2014 PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014)
EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
EN 1621-2:2014 Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods
EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
EN ISO 1401:2016 Rubber hoses for agricultural spraying (ISO 1401:2016)
EN 3207 : 1998 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
EN 4595:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling
EN ISO 14890:2013 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)
EN ISO 12736:2014 Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014)
EN 279 : 1991 HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR
EN 1763-1 : 2000 RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES
EN 681-2:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN ISO 5774:2016 Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016)
EN ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)
ISO 19003:2006 Rubber and rubber products — Guidance on the application of statistics to physical testing
UNE-EN 16730:2017 Railway applications - Track - Concrete sleepers and bearers with under sleeper pads
I.S. EN 15129:2009 ANTI-SEISMIC DEVICES
05/30089181 DC : DRAFT FEB 2005 ISO 4195 - CONVEYOR BELTS - HEAT RESISTANCE
DIN EN 15551:2013-05 (Draft) RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
03/300798 DC : DRAFT JAN 2003 EN 13483 - HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEM - SPECIFICATION
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
96/106381 DC : DRAFT AUG 1996 PREN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
BS ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
API SPEC 19OH : 2018 OPENHOLE ISOLATION EQUIPMENT
BS 2782-3.322(1994) : 1994 AMD 8639 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS
UNI EN ISO 11296-7 : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
I.S. EN 13566-7:2007 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
UNE-EN 15566:2017 Railway applications - Railway rolling stock - Draw gear and screw coupling
BS ISO 10282:2014 Single-use sterile rubber surgical gloves. Specification
I.S. EN 559:2003 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
11/30187339 DC : 0 BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES
DIN ISO 4925:1980-04 ROAD VEHICLES - NON-PETROLEUM BASE BRAKE FLUID
I.S. EN 4594:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
DIN ISO 3384-1 E : 2015 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE (ISO 3384-1:2011 + AMD.1:2013)
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
ISO 4195-2:1988 Conveyor belts — Heat resistance — Part 2: Specifications
ISO 9553:1997 Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors
12/30261644 DC : 0 BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE
BS IEC/IEEE 62582-3:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Elongation at break
PREN 1337-3 : DRAFT 2018 STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
BS EN ISO 12311:2013 Personal protective equipment. Test methods for sunglasses and related eyewear
CEI EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
UNI ISO 2475 : 2012 CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE
14/30288439 DC : 0 BS ISO 1817 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS
BS ISO 17357-1:2014 Ships and marine technology. Floating pneumatic rubber fenders High pressure
DIN EN ISO 4641:2016-07 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016)
ONORM EN 12115 : OCT 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
BS ISO 2393:2014 Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures
PREN 1360 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
13/30275849 DC : 0 BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification
BS ISO 29942:2011 Prophylactic dams. Requirements and test methods
DIN EN 16730 E : 2016 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS
BS ISO 22762-1:2005 Elastomeric seismic-protection isolators Test methods
BS 5293-21:1995 Sampling and testing carbon black for use in the rubber industry Classification system for carbon blacks used in rubber products
08/30176627 DC : DRAFT JAN 2008 BS ISO 2476 - RUBBER, BUTADIENE (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES
11/30250270 DC : 0 BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
BS EN 60455-2:2015 Resin based reactive compounds used for electrical insulation Methods of test
14/30295538 DC : 0 BS ISO 2302 - ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES
UNE-EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
DIN EN 15807:2011-05 Railway applications - Pneumatic half couplings
DIN ISO 3384-1:2015-12 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013)
15/30254249 DC : DRAFT MAY 2015 BS ISO 17717 - METEOROLOGICAL BALLOON - SPECIFICATION
BS 903-4:2003 Physical testing of rubber Acquisition and presentation of comparable multi-point data
03/321547 DC : DRAFT DEC 2003 IEC 60216-2 ED.4 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
15/30317636 DC : 0 BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING
03/118041 DC : DRAFT NOV 2003 EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS
UNI EN 4595 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
15/30317648 DC : 0 BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION
15/30317663 DC : 0 BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION
BS ISO 188:2011 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
DIN EN 15129 E : 2010 ANTI-SEISMIC DEVICES
NF EN 15129 : 2010 ANTI-SEISMIC DEVICES
BS ISO 13363:2004 Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification
07/30131694 DC : 0 BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES
BS ISO 3384:2005 Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
BS ISO 17717:2017 Meteorological balloons. Specification
BS ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification
ASTM D 6324 : 2011 Standard Test Methods for Male Condoms Made from Polyurethane
PREN 4595 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
BS 903-A62:1993 Physical testing of rubber Method for determination of green strength of raw rubber of unvulcanized compounds
EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
BS ISO 1403 : 1995 AMD 9703 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS
I.S. EN 16820:2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
CEI EN 60544-4 : 2005 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
CGSB-20.27 : M91 STERILE OR NON-STERILE MEDICAL EXAMINATION GLOVES FOR SINGLE USE
ISO/TS 16096:2014 Reclaimed isobutene-isoprene (IIR) rubber Evaluation procedure
PREN 15129 : DRAFT 2017 ANTI-SEISMIC DEVICES
ISO 7076-3:2016 Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
ISO 4635:2011 Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification
UNE-EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
ISO 1658:2015 Natural rubber (NR) Evaluation procedure
ISO 6446:1994 Rubber products — Bridge bearings — Specification for rubber materials
DIN EN ISO 14607:2009-08 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS
BS EN ISO 3821:2010 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
ISO 5794-3:2011 Rubber compounding ingredients Silica, precipitated, hydrated Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
BIS IS 14794 : 2013 ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES
ISO 10247:1990 Conveyor belts Characteristics of covers Classification
CSA C22.2 No. 62282-2 :2007 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
ISO 11193-2:2006 Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
I.S. EN 60216-2:2005 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
ISO 2475:2011 Chloroprene rubber (CR) — General-purpose types — Evaluation procedure
ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification
ISO 17717:2017 Meteorological balloons Specification
BS ISO 17357:2002 Ships and marine technology. High-pressure floating pneumatic rubber fenders
BS EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
UNE-EN 16820:2018 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
UNE-EN ISO 11296-7:2014 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
BIS IS 13774 : 2014 LIVE WORKING - GLOVES OF INSULATING MATERIAL
ASTM D 5937 : 1996 Standard Test Method for Determination of Tensile Properties and Test Conditions for Moulding and Extrusion Plastics (Withdrawn 1998)
ISO 5423:1992 Moulded plastics footwear Lined or unlined polyurethane boots for general industrial use Specification
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 7076-4:2016 Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment
ISO 6111:1982 Rubber footwear Lined or unlined rubber industrial boots with chemical resistance
ISO 9026:2007 Raw rubber or unvulcanized compounds Determination of green strength
I.S. EN 14840:2005 JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
DIN EN 1621-2:2014-05 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 2: MOTORCYCLISTS' BACK PROTECTORS - REQUIREMENTS AND TEST METHODS
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
UNE-EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
BS EN ISO 527-2:1996 Plastics. Determination of tensile properties Test conditions for moulding and extrusion plastics
14/30299887 DC : 0 BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
ISO 5774:2016 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
ISO 8029:2014 Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification
BS EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery. Specification
DIN EN 12259-5:2002-12 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 5: WATER FLOW DETECTORS
DIN EN 14840:2005-12 Joint fillers and sealants - Test methods for preformed joint seals
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
UNI EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 1762:2004-07 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
EN 60544-4:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
EN 1337-3:2005 Structural bearings - Part 3: Elastomeric bearings
DIN EN ISO 14910-2:2013-06 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
DIN ISO 3384:2008-07 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES
EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
DIN EN 14879-5:2007-10 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
DIN EN ISO 527-2:2012-06 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
DIN EN 483:2000-06 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
DIN EN ISO 15236-3:2008-04 STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017)
EN 60903 : 2003 COR 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL
EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
EN 13566-7:2007 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
EN 62621:2016/A1:2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS
ONORM EN ISO 12736 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)

ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
AS/NZS 1335:2020 Gas welding equipment - Rubber hoses for welding, cutting and allied processes
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
ISO 13226:2011 Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
AS 14448:2020 Low modulus adhesives for exterior tile finishing (ISO 14448:2016, MOD)
ISO 6072:2011 Rubber Compatibility between hydraulic fluids and standard elastomeric materials
ISO 5893:2002 Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification
ISO/TR 9272:2005 Rubber and rubber products Determination of precision for test method standards

View more information
US$175.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.