• There are no items in your cart

ISO 3977-3:2004

Current
Current

The latest, up-to-date edition.

Gas turbines — Procurement — Part 3: Design requirements
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

08-24-2004

ISO 3977-3:2004 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.

It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.

ISO 3977-3:2004 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.

In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), ISO 3977-3:2004 provides a basis.

Committee
ISO/TC 192
DevelopmentNote
Supersedes ISO/FDIS 3977-3 (08/2004)
DocumentType
Standard
Pages
63
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
NEN ISO 3977-3 : 2004 Identical
BS ISO 3977-3:2004 Identical
NF ISO 3977-3 : 2005 Identical
BIS IS 15666-3 : 2006(R2016) Identical

17/30368249 DC : 0 BS ISO 20816-4 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 4: GAS TURBINES IN EXCESS OF 3 MW, WITH FLUID-FILM BEARINGS
UNI ISO 10816-4 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
BS ISO 26382:2010 Cogeneration systems. Technical declarations for planning, evaluation and procurement
BS ISO 3977-8:2002 Gas turbines. Procurement Inspection, testing, installation and commissioning
06/30157092 DC : 0 ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
BS ISO 10816-4 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
09/30190941 DC : DRAFT JAN 2009 BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment
BS EN ISO 3977-5:2003 Gas turbines. Procurement Applications for petroleum and natural gas industries
ISO 19859:2016 Gas turbine applications Requirements for power generation
ISO 21789:2009 Gas turbine applications — Safety
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
16/30341590 DC : 0 BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
BS ISO 20816-2:2017 Mechanical vibration. Measurement and evaluation of machine vibration Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
BS ISO 3977-5 : 2002 AMD 14278 GAS TURBINES - PROCUREMENT - APPLICATIONS FOR PETROLEUM AND NATURAL GAS INDUSTRIES
BS ISO 21789:2009 Gas turbine applications — Safety
ISO 26382:2010 Cogeneration systems — Technical declarations for planning, evaluation and procurement
ISO 19372:2015 Microturbines applications — Safety
UNI ISO 7919-4 : 2010 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
16/30337263 DC : 0 BS ISO 20816-2 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 2: LAND-BASED GAS TURBINES, STEAM TURBINES AND GENERATORS IN EXCESS OF 40 MW, WITH FLUID-FILM BEARINGS
16/30341596 DC : 0 BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
BS ISO 3977-4:2002 Gas turbines. Procurement Fuels and environment
09/30190938 DC : DRAFT JAN 2009 BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
ISO 3977-7:2002 Gas turbines Procurement Part 7: Technical information
BS ISO 7919-4 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS
ISO 20816-2:2017 Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
BS ISO 19372:2015 Microturbines applications. Safety
ISO 3977-5:2001 Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
EN ISO 3977-5:2003 Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning
I.S. EN ISO 3977-5:2003 GAS TURBINES - PROCUREMENT - PART 5: APPLICATIONS FOR PETROLEUM AND NATURAL GAS INDUSTRIES
BS ISO 3977-7:2002 Gas turbines. Procurement Technical information
ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
DIN EN ISO 3977-5:2003-05 GAS TURBINES - PROCUREMENT - PART 5: APPLICATIONS FOR PETROLEUM AND NATURAL GAS INDUSTRIES

ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
DIN 2547:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 100
ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment
ISO 15649:2001 Petroleum and natural gas industries — Piping
BS 4807:1991 Recommendation for centralized lubrication systems
ISO 3977-2:1997 Gas turbines — Procurement — Part 2: Standard reference conditions and ratings
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASME B31.1 : 2016 POWER PIPING
ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions
ISO 3977-7:2002 Gas turbines Procurement Part 7: Technical information
ISO 10816-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO 11086:1996 Gas turbines — Vocabulary
ISO 7919-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO 10814:1996 Mechanical vibration Susceptibility and sensitivity of machines to unbalance
NFE 29 204 : 2008 INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS
API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
DIN 2551:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 400
ISO 3977-9:1999 Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
NFE 29 600 : 1987 INDUSTRIAL PIPEWORK - STEEL FITTINGS AND PLUGS - SOCKET WELDING FITTINGS
ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems
ISO 3977-5:2001 Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries
DIN 2545:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 40
DIN 2550:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 320
DIN 24425:1991-07 (Draft) OIL (SUPPLY) SYSTEMS - DESCRIPTION, SELECTION, REQUIREMENTS CLASSES
NFE 29 203 : 1989 INDUSTRIAL PIPEWORK - CARBON, ALLOY AND AUSTENITIC STAINLESS STEEL FLANGES AND FLANGED FITTINGS - TERMINOLOGY - DIMENSIONS
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ISO 11042-1:1996 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
ISO 11042-2:1996 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
ISO 10816-1:1995 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
DIN 2543:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 16
BS EN 288-3:1992 Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
DIN 2546:1969-11 CAST STEEL FLANGES - NOMINAL PRESSURE 64
DIN 2549:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 250
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
DIN 2548:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 160
ISO 1940-2:1997 Mechanical vibration Balance quality requirements of rigid rotors Part 2: Balance errors
BS 4504-3.3:1989 Circular flanges for pipes, valves and fittings (PN designated) Specification for copper alloy and composite flanges
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
AGMA 420 : LATEST PRACTICE FOR ENCLOSED SPEED REDUCERS OR INCREASERS USING SPUR, HELICAL, HERRINGBONE AND SPIRAL BEVEL GEARS
ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
DIN 2544:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 25
ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors

View more information
US$225.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.