• There are no items in your cart

ISO 4017:2014

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Fasteners Hexagon head screws Product grades A and B
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

06-28-2022

Language(s)

English, French

Published date

07-01-2014

ISO 4017:2014 specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10d or 150 mm, whichever is the shorter.

DevelopmentNote
Supersedes ISO/FDIS 4017. (07/2014)
DocumentType
Standard
Pages
10
ProductNote
THIS STANDARD ALSO HAVE CORRECTED VERSION FOR FRENCH FOR THE YEAR 2015 .
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

02/124462 DC : DRAFT DEC 2002 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
DIN 83208:2002-08 STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - PROTECTING PLATES
BIS IS 2577-5 : 2012 ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES
12/30261215 DC : 0 BS EN 13060 - SMALL STEAM STERILIZERS
03/319369 DC : DRAFT NOV 2003 ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING
BS ISO 19280:2017 Corrosion of metals and alloys. Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
16/30340613 DC : 0 BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
07/30167330 DC : DRAFT AUG 2007 BS EN 868-8 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
BS ISO 8820-5:2015 Road vehicles. Fuse-links Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
BS EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust General requirements
BIS IS 1363-3 : 2002 HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64)
PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BIS IS 2577-6 : 2012 ROAD VEHICLES - FUSE-LINKS - PART 6: SINGLE-BOLT FUSE-LINKS
BIS IS 1363-1 : 2002 HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64)
UNE-EN 1993-1-8:2013 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
BS ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
CSA C22.2 No. 60079.0 : 2015 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
PREN 13060 : DRAFT 2012 SMALL STEAM STERILIZERS
PREN 3794 : 200P1 AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS
I.S. EN ISO 16047:2005 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005)
I.S. EN ISO 10683:2014 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
UNI EN ISO 8676 : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BS EN ISO 10683:2014 Fasteners. Non-electrolytically applied zinc flake coatings
DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
BIS IS 1364-6 : 2002 HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2
UNE-EN ISO 10683:2015 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
DIN EN ISO 15883-2:2009-09 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
UNE-EN ISO 4033:2013 Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
UNE-EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
ISO 15883-2:2006 Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
BS EN ISO 4032:2012 Hexagon regular nuts (style 1). Product grades A and B
UNE-EN ISO 4032:2013 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B
ISO 4016:2011 Hexagon head bolts Product grade C
I.S. EN ISO 4034:2012 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
I.S. EN ISO 4018:2011 HEXAGON HEAD SCREWS - PRODUCT GRADE C
EN ISO 4034:2012/AC:2013 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
DIN EN ISO 10683:2001-02 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
EN 50014:1997/A2:1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
NBR 15926-2 : 2011 ERRATA 2011 EQUIPMENT AMUSEMENT PARK - PART 2: SAFETY REQUIREMENTS PROJECT
NBR IEC 60079-0 : 2013 ERRATA 2 2016 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
11/30229160 DC : 0 BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
12/30274606 DC : 0 BS ISO 8820-5 - ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES
03/300201 DC : DRAFT FEB 2003 IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
03/315782 DC : DRAFT SEP 2003 BS ISO 8820-5 - ROAD VEHICLES - FUSE LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES
PREN 3095 : 200P1 AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF EXTENDED ASSEMBLY TIME
DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
I.S. EN 13060:2014 SMALL STEAM STERILIZERS
DIN 267-28:2009-09 Fasteners - Part 28: Steel screws, bolts and studs with locking coating - Technical delivery conditions
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 15071:2011 Hexagon bolts with flange Small series Product grade A
SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
DIN EN 1993-1-8:2010-12 Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009)
DIN EN ISO 8675:2016-05 (Draft) HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
DIN EN ISO 8765:2011-06 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
DIN EN ISO 8676:2011-07 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
DIN EN ISO 8673:2016-05 (Draft) HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
UNE-EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
BS EN ISO 4033:2012 Hexagon high nuts (style 2). Product grades A and B
UNE-EN ISO 8673:2013 Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)
09/30206527 DC : 0 BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN ISO 4036:2012 Hexagon thin nuts unchamfered (style 0). Product grade B
BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
I.S. EN ISO 4032:2012 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
I.S. EN ISO 15883-2:2009 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
I.S. EN ISO 8673:2012 HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
I.S. EN ISO 4036:2012 HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
I.S. EN ISO 8676:2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
I.S. EN ISO 8675:2012 HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
I.S. EN ISO 4033:2012 HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
I.S. EN ISO 4016:2011 HEXAGON HEAD BOLTS - PRODUCT GRADE C
I.S. EN 15048-2:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
I.S. EN 14180:2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN ISO 8765:2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN 14180:2003-10 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN ISO 8674:2012 HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
ISA 61241-0 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
I.S. EN ISO 4035:2012 HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012)
I.S. EN ISO 4014:2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
NF EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
VDI/VDE 2251 Blatt 1.1:2016-02 Bolted joints - Tensioned joints - Precision engineering components
ONORM EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN EN 50014 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS ISO 4162:2012 Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
97/710376 DC : 0 PREN 3095 - AEROSPACE SERIES - TEST METHODS FOR SEALANTS - DETERMINATION OF EXTENDED ASSEMBLY TIME
ONORM EN 1515-4 : 2010 FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG
UNI EN ISO 10683 : 2014 FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS
UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
PREN 868-8 : DRAFT 2017 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
BS EN 50014:1998 Electrical apparatus for potentially explosive atmospheres. General requirements
CSA E60079.0 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
ISO 4162:2012 Hexagon bolts with flange Small series Product grade A with driving feature of product grade B
EN 13060:2014 Small steam sterilizers
DIN EN 868-8:2009-09 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO 13584-511:2006 Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners
DIN 30690-1:2016-04 CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS
SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
I.S. EN 868-8:2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
DIN EN ISO 10683:2016-07 (Draft) FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014)
UNI EN 868-8 : 2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
ISO 17842-1:2015 Safety of amusement rides and amusement devices — Part 1: Design and manufacture
IEC 61241-0:2004 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
DIN EN 13060:2015-03 SMALL STEAM STERILIZERS
DIN EN ISO 8673 E : 2013 HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
DIN EN ISO 8765 E : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 8674 E : 2013 HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
UNE-EN ISO 4036:2013 Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)
DIN EN ISO 4034:2016-05 (Draft) HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
DIN EN ISO 8674:2016-05 (Draft) HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
BS EN ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B
UNE-EN ISO 4034:2013 Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)
BS EN ISO 15883-2:2009 Washer-disinfectors Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
BS EN ISO 4018:2011 Hexagon head screws. Product grade C
UNE-EN ISO 8674:2013 Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)
EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
UNI EN ISO 4036 : 2013 HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B
UNI EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 4033 : 2013 HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B
UNI EN ISO 4016 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADE C
UNI EN ISO 4034 : 2013 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C
UNI EN ISO 4035 : 2013 HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B
ONORM EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
UNI EN ISO 8673 : 2013 HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 10644 : 2009 SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
UNI EN ISO 15883-2 : 2009 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER- DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
UNI EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
UNI EN ISO 4032 : 2013 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B
UNI EN ISO 8674 : 2013 HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN 1993-1-8 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
UNI EN ISO 4018 : 2011 HEXAGON HEAD SCREWS - PRODUCT GRADE C
UNI EN ISO 8675 : 2013 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B
UNI EN 14180 : 2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
ISO 8820-5:2015 Road vehicles Fuse-links Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
PREN 17180 : DRAFT 2017 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
ONORM EN ISO 16047 : 2012 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012)
UNI EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
BIS IS 800 : 2007 AMD 1 2012 GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
BS 6104-2:1983 Mechanical properties of fasteners Specification for nuts with specified proof load values
07/30161494 DC : 0 BS EN ISO 10644 - SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
DIN ISO 8820-6:2011-05 Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links (ISO 8820-6:2007)
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
DIN EN 1515-4 E : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
UNE-EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements
UNE-EN 15048-2:2017 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
UNI EN ISO 16047 : 2012 FASTENERS - TORQUE/CLAMP FORCE TESTING
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
EN ISO 10683:2014 Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014)
17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
UNE-EN 13060:2015 Small steam sterilizers
I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
I.S. EN 61241-0:2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
DIN EN ISO 4032:2016-05 (Draft) HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
DIN EN 14180:2014-09 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 15048-2:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
DIN EN ISO 8676 E : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 8675 E : 2013 HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
BS EN ISO 10644:2009 Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV
BS EN ISO 4014:2011 Hexagon head bolts. Product grades A and B
UNE-EN ISO 4035:2013 Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
BS ISO 17842-1:2015 Safety of amusement rides and amusement devices Design and manufacture
ISO 4035:2012 Hexagon thin nuts chamfered (style 0) — Product grades A and B
IEC 60079-0:2017 RLV Explosive atmospheres - Part 0: Equipment - General requirements
ISO 4033:2012 Hexagon high nuts (style 2) — Product grades A and B
BS EN ISO 4035:2012 Hexagon thin nuts chamfered (style 0). Product grades A and B
BS EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread. Product grades A and B
BS EN ISO 4016:2011 Hexagon head bolts. Product grade C
UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
ISO 4034:2012 Hexagon regular nuts (style 1) Product grade C
BS EN 20898-2:1994 Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread
ANSI/AAMI ST15883-2:2013(R2015) (ISO 15883-2:2006 MOD) WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
UNE-EN ISO 8675:2013 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
BS EN ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B
BS EN 15048-2:2007 Non-preloaded structural bolting assemblies Suitability test
UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
ISO 4014:2011 Hexagon head bolts Product grades A and B
UNE-EN ISO 10644:2010 Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
ISO 8676:2011 Hexagon head screws with metric fine pitch thread Product grades A and B
BS EN 13060 : 2014 SMALL STEAM STERILIZERS
BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) Product grade B
UNE-EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
05/30134569 DC : DRAFT JUN 2005 IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B
BS EN 14180:2014 Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
ISO 10644:2009 Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV
BS EN 1993-1-8:2005 Eurocode 3. Design of steel structures Design of joints
ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B
UNE-EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
ISO 4018:2011 Hexagon head screws Product grade C
ISO 8765:2011 Hexagon head bolts with metric fine pitch thread Product grades A and B
BS EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread. Product grades A and B
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN 13814:2004 Fairground and amusement park machinery and structures - Safety
EN ISO 4035:2012 Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012)
EN ISO 15883-2:2009 Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006)
EN 1993-1-8:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
EN ISO 10644:2009 Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
EN 20898-2 : 1993 MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992)
EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
EN ISO 4033:2012 Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)
EN ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012)
EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing
EN ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012)
EN ISO 16047:2005/A1:2012 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005/AMD 1:2012)
EN ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012)
EN ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012)
DIN ISO 8820-5:2011-05 ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES
I.S. EN 60079-0:2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
I.S. EN 13814:2005 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
02/121895 DC : DRAFT APR 2002 BS EN 13060 - SMALL STEAM STERILIZERS
BIS IS 15855 : 2010 COTTON SEED DELINTING MACHINERY - SURGE BIN MACHINE - SPECIFICATION
DIN 83205:2002-08 STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - GUARD RAILS
ISO 19280:2017 Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
DIN 19558:2002-12 WASTEWATER TREATMENT PLANTS - OUTLET INSTALLATIONS, WEIR AND SCUM BAFFLE, SUBMERGED EFFLUENT PIPES IN TANKS - CONSTRUCTION PRINCIPLES, MAIN DIMENSIONS, LAYOUT
DIN 3237-1:1994-10 STRAIGHT PATTERN VALVES WITH FLANGE SOCKET IN MAIN POWER CONNECTION - PART 1: WITHOUT LINING
ISO 16047:2005 Fasteners — Torque/clamp force testing
CSA Z15883-2 : 2009 : R2014 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
05/30127446 DC : DRAFT JAN 2005 ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS
PREN 3795 : 200P1 AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE
AAMI ST15883-2 : 2013 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
BS ISO 8820-6:2007 Road vehicles. Fuse-links Single-bolt fuse-links
ISO 8820-6:2007 Road vehicles Fuse-links Part 6: Single-bolt fuse-links
CSA Z15883-2 : 2009 WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC.
BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN ISO 16047 : 2005 FASTENERS - TORQUE/CLAMP FORCE TESTING
ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
UNE-EN 1090-3:2011 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
17/30360915 DC : 0 BS EN 868-8 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS
BS EN 868-8:2009 Packaging for terminally sterilized medical devices Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods
ISO 10683:2014 Fasteners Non-electrolytically applied zinc flake coatings
IEC 60079-0 REDLINE : 7.0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
DIN EN ISO 10644:2009-10 SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
DIN EN ISO 4033:2016-05 (Draft) HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
BS EN ISO 4034:2012 Hexagon regular nuts (style 1). Product grade C
BS EN 13814:2004 Fairground and amusement park machinery and structures. Safety
UNE-EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
BS EN ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
DIN EN ISO 4016:2011-06 Hexagon head bolts - Product grade C (ISO 4016:2011)
DIN 267-27:2009-09 Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating - Technical delivery conditions
DIN EN ISO 4036:2013-04 HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
DIN EN ISO 4014:2011-06 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
DIN EN ISO 16047:2013-01 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012)
EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
DIN EN ISO 4018:2011-07 Hexagon head screws - Product grade C (ISO 4018:2011)
ASME B18.2.3.1M : 1999 METRIC HEX CAP SCREWS
ASME B18.2.3.1M : 1999 : R2011 METRIC HEX CAP SCREWS
ASME B18.2.3.1M : 1999 : R2005 METRIC HEX CAP SCREWS

ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)
ISO 8839:1986 Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals
ISO 4035:2012 Hexagon thin nuts chamfered (style 0) — Product grades A and B
ISO 8675:2012 Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B
ISO 8673:2012 Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B
ISO 8765:2011 Hexagon head bolts with metric fine pitch thread Product grades A and B
ISO 10683:2014 Fasteners Non-electrolytically applied zinc flake coatings
ISO 10684:2004 Fasteners — Hot dip galvanized coatings
ISO 21670:2014 Fasteners — Hexagon weld nuts with flange
ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12
ISO 4042:1999 Fasteners Electroplated coatings
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
ISO 4753:2011 Fasteners Ends of parts with external ISO metric thread
ISO 8674:2012 Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B
ISO 7720:2012 Prevailing torque type all-metal hexagon nuts, style 2 Property class 9
ISO 4016:2011 Hexagon head bolts Product grade C
ISO 4759-1:2000 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
ISO 6157-1:1988 Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
ISO 4034:2012 Hexagon regular nuts (style 1) Product grade C
ISO 8676:2011 Hexagon head screws with metric fine pitch thread Product grades A and B
ISO 4161:2012 Hexagon nuts with flange, style 2 — Coarse thread
ISO 7043:2012 Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B
ISO 4015:1979 Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
ISO 225:2010 Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions
ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) Product grade B
ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10
ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12
ISO 15071:2011 Hexagon bolts with flange Small series Product grade A
ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10
ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10
ISO 12125:2012 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B
ISO 888:2012 Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
ISO 4033:2012 Hexagon high nuts (style 2) — Product grades A and B
ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
ISO 7041:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12
ISO 8992:2005 Fasteners — General requirements for bolts, screws, studs and nuts
ISO 10663:2012 Hexagon nuts with flange, style 2 — Fine pitch thread
ISO 3269:2000 Fasteners Acceptance inspection
ISO 7044:2012 Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 4014:2011 Hexagon head bolts Product grades A and B
ISO 4018:2011 Hexagon head screws Product grade C
ISO 12126:2012 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B
ISO 4162:2012 Hexagon bolts with flange Small series Product grade A with driving feature of product grade B

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.