ISO 4302:2016
Current
Current
The latest, up-to-date edition.
Cranes — Wind load assessment
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
09-19-2016
ISO 4302:2016 specifies the assessment of wind loads on cranes.
It establishes general methods for calculating wind loads (for in-service and out-of-service conditions), which are included in the load combinations stated in ISO 8686-1 and used for proofs of competence such as those given in ISO 20332 for the structural components of cranes.
It provides a simplified method of calculation and assumes that
- the wind may blow horizontally from any direction,
- the wind blows at a constant speed,
- there is a static reaction to the wind load applied to the crane structure.
It includes built-in allowances for the effects of gusting (fluctuation in wind speed) and for dynamic response.
It gives guidance on when to secure the crane for out-of-service conditions.
| Committee |
ISO/TC 96/SC 10
|
| DevelopmentNote |
Supersedes ISO/DIS 4302. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
22
|
| ProductNote |
THIS STANDARD ALSO REFERS TO- ISO 4306
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 4302:2016 | Identical |
| BIS IS 14467 : 1997(R2003) | Identical |
| UNI ISO 4302 : 1988 | Identical |
| SANS 4302 : 1ED 2002(R2014) | Identical |
| PN ISO 4302 : 1998 | Identical |
| UNE 58113:1985 | Identical |
| 17/30325088 DC : 0 | BS ISO 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES |
| 11/30243784 DC : 0 | BS ISO 8686-1 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 1: GENERAL |
| 15/30281554 DC : 0 | BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS |
| BS ISO 10896-2:2016 | Rough-terrain trucks. Safety requirements and verification Slewing trucks |
| CSA B354.5 : 2007 : R2016 | MAST-CLIMBING WORK PLATFORMS |
| CSA B354.1:2004 | PORTABLE ELEVATING WORK PLATFORMS |
| 95/540011 DC : DRAFT JAN 1995 | PREN 1777 - HIGH-RISE AERIAL APPLIANCES - HYDRAULIC PLATFORMS FOR FIRE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
| ISO 8686-2:2004 | Cranes Design principles for loads and load combinations Part 2: Mobile cranes |
| DIN EN 1459-2 E : 2016 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| B354.12-17 | Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs) |
| DIN EN 12158-1:2011-06 | Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010) |
| DIN EN 1495:2009-12 | Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009) |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 14044:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods |
| BS EN 280 : 2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| I.S. EN 14043:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| UNI EN 12158-1 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| DIN EN 791:2010-01 | DRILL RIGS - SAFETY |
| NF EN 12158-1 : 2000 + A1 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| ISO 8686-4:2005 | Cranes Design principles for loads and load combinations Part 4: Jib cranes |
| BS EN 45510-6-8:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes |
| 17/30341100 DC : 0 | BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
| 02/708844 DC : DRAFT JULY 2002 | ISO/DIS 16368.4 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| 93/711895 DC : DRAFT AUG 1993 | ISO/DIS 12485-3 - CRANES - STABILITY REQUIREMENTS - PART 3: TOWER CRANES |
| 04/30108591 DC : DRAFT JAN 2004 | ISO 8686-4 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS |
| BS 7171:1989 | Specification for mobile elevating work platforms |
| 09/30201429 DC : 0 | BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS |
| CSA B354.4 : 2002 : R2013 | SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS |
| CSA B354.4 : 2002 : R2007 : FR | SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS |
| ISO 12210-1:1998 | Cranes Anchoring devices for in-service and out-of-service conditions Part 1: General |
| I.S. EN 1459-2:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| ISO 10896-2:2016 | Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks |
| ISO 10972-3:2003 | Cranes Requirements for mechanisms Part 3: Tower cranes |
| B354.9-17 | Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs) |
| ISO/TR 25599:2005 | Cranes Jib cranes International Standards for design, manufacturing, use and maintenance requirements and recommendations |
| DIN EN 1777:2010-06 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| DIN EN 12159:2013-03 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNE-EN 1777:2011 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| I.S. EN 12158-2:2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| I.S. EN 12158-1:2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| I.S. EN 1777:2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| I.S. EN 14044:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 280:2013 | MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS |
| I.S. EN 1495:1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| ISO 8686-3:1998 | Cranes Design principles for loads and load combinations Part 3: Tower cranes |
| PD ISO/TR 19961:2010 | Cranes. Safety code on mobile cranes |
| 00/541673 DC : DRAFT NOV 2000 | BS EN 14044 - SEMI-AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| 14/30318963 DC : DRAFT DEC 2014 | BS EN 61057 - LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| 93/702540 DC : DRAFT FEB 1993 | ISO/DIS 12210-4 - CRANES - OUT OF SERVICE ANCHORING DEVICES - PART 4: JIB CRANES |
| 11/30249027 DC : 0 | BS ISO 15442 - CRANES - SAFETY REQUIREMENTS FOR LOADER CRANES |
| 14/30295634 DC : 0 | BS EN 16719 - TRANSPORT PLATFORMS |
| BS ISO 4305 : 2014 | MOBILE CRANES - DETERMINATION OF STABILITY |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| CSA B354.1 : 2004 : R2011 | PORTABLE ELEVATING WORK PLATFORMS |
| ISO 16369:2007 | Elevating work platforms Mast-climbing work platforms |
| EN 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| I.S. EN 61057:2017 | LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| EN 1459-2:2015 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| ISO 4305:2014 | Mobile cranes — Determination of stability |
| DIN EN 12158-2:2011-04 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010) |
| BS EN 1495 : 1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 1495 : 2009 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 791 : 2009 | DRILL RIGS - SAFETY |
| UNI EN 996 : 2009 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 1777 : 2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| EN 1495:1997+A2:2009/AC:2010 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 14043 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| UNI EN 12158-2 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| UNI EN 14044 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS ISO 16368:2003 | Mobile elevating work platforms. Design calculations, safety requirements and test methods |
| BS ISO 15442:2012+A1:2015 | Cranes. Safety requirements for loader cranes |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| ISO 8686-5:2017 | Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 93/702546 DC : DRAFT FEB 1993 | ISO/DIS 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES |
| CEI UNI EN 45510-6-8 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| 04/102837 DC : DRAFT JAN 2004 | ISO 9926-3 - CRANES - TRAINING OF DRIVERS - PART 3: TOWER CRANES |
| BS ISO 9926-3:2016 | Cranes. Training of operators Tower cranes |
| 00/541672 DC : DRAFT NOV 2000 | BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| 14/30313865 DC : 0 | BS ISO 9926-3 - CRANES - TRAINING OF OPERATORS - PART 3: TOWER CRANES |
| 05/30082472 DC : DRAFT AUG 2005 | BS 7121-1 - CODE OF PRACTICE FOR SAFE USE OF CRANES - PART 1: GENERAL |
| BS EN 61057:1994 | Aerial devices with insulating boom used for live working exceeding 1 kV a.c. |
| PD ISO/TR 25599:2006 | Cranes. Jib cranes. International standards for design, manufacturing, use and maintenance requirements and recommendations |
| CSA B354.1 : 2004 : R2016 | PORTABLE ELEVATING WORK PLATFORMS |
| CSA B354.2 : 2001 : R2013 | SELF-PROPELLED ELEVATING WORK PLATFORMS |
| CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 | MAST-CLIMBING WORK PLATFORMS |
| CSA B354.5:2007 | MAST-CLIMBING WORK PLATFORMS |
| CSA B354.4 : 2002 : R2007 | SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS |
| CSA B354.4 : 2002 | SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| ISO/TR 19961:2010 | Cranes — Safety code on mobile cranes |
| ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
| UNE-EN 1459-2:2016 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| ISO 16368:2010 | Mobile elevating work platforms Design, calculations, safety requirements and test methods |
| IEC 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| UNE-EN 280:2014 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| DIN EN 280:2016-04 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015) |
| DIN EN 14044:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS EN 12158-2 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| BS EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing |
| BS EN 996 : 1996 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNE-EN 12158-1:2001 | Builders hoists for goods. Part 1: Hoists with accessible platforms. |
| BS EN 791 : 1996 | DRILL RIGS - SAFETY |
| UNE-EN 12158-2:2001 | Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices. |
| EN 14043:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN 14044:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
| EN 791:1995+A1:2009 | Drill rigs - Safety |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
| EN 280:2013+A1:2015 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| 04/30108943 DC : 0 | |
| 12/30246324 DC : 0 | BS ISO 4305 - MOBILE CRANES - DETERMINATION OF STABILITY |
| BS ISO 8686-5 : 2017 | CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES |
| 01/716333 DC : DRAFT DEC 2001 | BS ISO 8686-2 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 2: MOBILE CRANES |
| ISO 9926-3:2016 | Cranes Training of operators Part 3: Tower cranes |
| 94/714451 DC : DRAFT NOV 1994 | PREN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - SAFETY, EXAMINATION AND TESTS |
| CAN/CSA-B354.6:17 | Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations) |
| CSA B354.2 : 2001 : R2011 | SELF-PROPELLED ELEVATING WORK PLATFORMS |
| CSA B354.2 : 2001 | SELF-PROPELLED ELEVATING WORK PLATFORMS |
| CSA B354.4:2002 | SELF-PROPELLED BOOM-SUPPORTED ELEVATING WORK PLATFORMS |
| ISO 12485:1998 | Tower cranes Stability requirements |
| EN 16719:2018 | Transport platforms |
| BS EN 1459-2 : 2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| ISO 15442:2012 | Cranes — Safety requirements for loader cranes |
| ISO 14829:2002 | Freight containers — Straddle carriers for freight container handling — Calculation of stability |
| BS EN 14043:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
| BS EN 12158-1 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| DIN EN 996:2010-02 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms |
| ISO 8686-1:2012 | Cranes — Design principles for loads and load combinations — Part 1: General |
| ISO 20332:2016 | Cranes Proof of competence of steel structures |
US$150.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.