ISO 4613-2:1995
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
04-01-2019
08-10-1995
Specifies methods of preparation of test specimens and test methods to be used for the determination of the properties of ethylene/vinyl acetate moulding and extrusion materials. Specifies requirements for handling test material and for conditioning and gives properties and test methods which are necessary to characterize ethylene/vinyl acetate moulding and extrusion materials. Cancels and replaces the first edition.
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN ISO 4613-2 : 1995 AMD 1 2004 | Identical |
| UNE-EN ISO 4613-2:1996 | Identical |
| NBN EN ISO 4613-2 : 1995 AMD 1 2004 | Identical |
| NEN EN ISO 4613-2 : 1995 AMD 1 2004 | Identical |
| NEN ISO 4613-2 : 1990 | Identical |
| NS EN ISO 4613-2 : 1995 AMD 1 2004 | Identical |
| I.S. EN ISO 4613-2:1996 | Identical |
| PN EN ISO 4613-2 : 1999 AMD 1 2005 | Identical |
| SN EN ISO 4613-2 : 1996 AMD 1 2004 | Identical |
| UNI EN ISO 4613-2 : 2007 | Identical |
| PN-EN ISO 4613-2:1999 | Identical |
| BS EN ISO 4613-2:1995 | Identical |
| EN ISO 4613-2:1995/A1:2004 | Identical |
| DIN EN ISO 4613-2:2004-12 | Identical |
| DIN 16778-2:1988-04 | Similar to |
| UNE 53439-2:1994 | Identical |
| DIN EN ISO 1133:2000-02 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| DIN EN ISO 1133:2005-09 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| I.S. EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT-MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| ISO 4613-1:1993 | Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 1: Designation and specification |
| BS EN ISO 4613-1:1999 | Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Designation and specification |
| BS EN ISO 1133:2005 | Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| EN ISO 4613-1 : 1999 | PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION AND SPECIFICATION |
| I.S. EN ISO 4613-1:1999 | PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION AND SPECIFICATION |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 458-1:1985 | Plastics Determination of stiffness in torsion of flexible materials Part 1: General method |
| ISO/R 527:1966 | Plastics Determination of tensile properties |
| ISO 974:2000 | Plastics Determination of the brittleness temperature by impact |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| ISO 2556:1974 | Plastics Determination of the gas transmission rate of films and thin sheets under atmospheric pressure Manometric method |
| ISO 8985:1998 | Plastics Ethylene/vinyl acetate copolymer (EVAC) thermoplastics Determination of vinyl acetate content |
| ISO 75:1987 | Plastics and ebonite Determination of temperature of deflection under load |
| ISO 4613-1:1993 | Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 1: Designation and specification |
| ISO 537:1989 | Plastics Testing with the torsion pendulum |
| ISO 4892:1981 | Plastics Methods of exposure to laboratory light sources |
| ISO 899:1981 | Plastics — Determination of tensile creep |
| ISO 2039-1:2001 | Plastics Determination of hardness Part 1: Ball indentation method |
| ISO 294:1995 | Plastics Injection moulding of test specimens of thermoplastic materials |
| IEC 60243:1967 | Recommended methods of test for electric strength of solid insulating materials at power frequencies |
| ISO 1628-3:2010 | Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes |
| ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| ISO 6602:1985 | Plastics Determination of flexural creep by three-point loading |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 179:1993 | Plastics Determination of Charpy impact strength |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 4607:1978 | Plastics Methods of exposure to natural weathering |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 6252:1992 | Plastics Determination of environmental stress cracking (ESC) Constant-tensile-stress method |
| ISO 4600:1992 | Plastics Determination of environmental stress cracking (ESC) Ball or pin impression method |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.