• There are no items in your cart

ISO 4649:2017

Current
Current

The latest, up-to-date edition.

Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

09-14-2017

ISO 4649:2017 specifies two methods for the determination of the resistance of rubber to abrasion by means of a rotating cylindrical drum device.

The methods involve determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. Method A is for a non-rotating test piece and method B is for a rotating test piece. For each method, the result can be reported as a relative volume loss or an abrasion resistance index.

These test methods are suitable for comparative testing, quality control, specification compliance testing, referee purposes and research and development work. No close relation between the results of this abrasion test and service performance can be inferred.

NOTE The abrasion loss is often more uniform using the rotating test piece because the whole surface of the test piece is in contact with the abrasive sheet over the duration of the test. However, there is considerable experience using the non-rotating test piece.

DevelopmentNote
Supersedes ISO/FDIS 4649. (09/2017)
DocumentType
Standard
Pages
21
PublisherName
International Organization for Standardization
Status
Current
Supersedes

ISO 23794:2015 Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
NFPA 1999 : 2018 PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS
09/30206358 DC : DRAFT SEP 2009 BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
16/30337938 DC : 0 BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 3861 : 1995 AMD 9705 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
BS ISO 24453:2008 Rubber. Acquisition and presentation of comparable single-point data
01/122577 DC : DRAFT JUNE 2001 BS EN 1765 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
I.S. EN ISO 20957-8:2017 STATIONARY TRAINING EQUIPMENT - PART 8: STEPPERS, STAIRCLIMBERS AND CLIMBERS - ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-8:2017)
VDE 0212-2 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
09/30210239 DC : 0 BS EN 1817 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS
02/123312 DC : DRAFT AUG 2002 ISO/DIS 23794 - RUBBER, VULCANIZED OR THERMOPLASTIC - GUIDE TO ABRASION TESTING
BS ISO 28017:2009 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
PREN 1645-1 : DRAFT 2017 LEISURE ACCOMMODATION VEHICLES - CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
08/30161152 DC : DRAFT OCT 2008 BS EN 13634 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
PREN 12199 : DRAFT 2009 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
15/30321082 DC : 0 BS EN ISO 20957-5 - STATIONARY TRAINING EQUIPMENT - PART 5: PEDAL CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
06/30146125 DC : 0 EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
13/30266235 DC : 0 BS ISO 17325-1 - SHIPS AND MARINE TECHNOLOGY - MARINE ENVIRONMENT PROTECTION - OIL BOOMS - PART 1: DESIGN REQUIREMENTS
04/30112805 DC : DRAFT APR 2004 BS EN ISO 15236-1 - STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE
13/30241427 DC : 0 BS EN 16584-3 - RAILWAY APPLICATIONS - DESIGN FOR PRM USE - GENERAL REQUIREMENTS - PART 3: OPTICAL AND FRICTION CHARACTERISTICS
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
ISO 11659-2:2004 Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials
17/30354254 DC : 0 BS EN 1645-1 - LEISURE ACCOMMODATION VEHICLES - CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
PREN 13483 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
ISO 10575:2012 Resilient floor coverings — Specification for rubber sheet floor coverings with backing
09/30196635 DC : 0 BS EN 60092-510 - ELECTRICAL INSTALLATIONS IN SHIPS - SPECIAL FEATURES - HIGH VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS)
BS ISO 13628-10 : 2005 AMD 16775 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification
BS EN ISO 20957-9:2016 Stationary training equipment Elliptical trainers, additional specific safety requirements and test methods
API TR 10TR6 : 2015 EVALUATION AND TESTING OF MECHANICAL CEMENT WIPER PLUGS
I.S. EN ISO 18797-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service Specification
BS 1435-1:1987 Rubber hose assemblies for oil suction and discharge services Specification for the assemblies
NF EN 1816 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS WITH FOAM BACKING
NFPA 1977 : 2016 PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING
EN ISO 20957-9:2016 Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)
DIN EN ISO 15236-1:2016-06 (Draft) STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE (ISO 15236-1:2016)
DIN EN ISO 15236-3:2016-10 (Draft) STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017)
DIN EN 13483:2013-09 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
UNE-EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
BS EN 13899:2003 Roller sports equipment. Roller skates. Safety requirements and test methods
BS EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen. Specification
BS EN ISO 15236-3:2017 Steel cord conveyor belts Special safety requirements for belts for use in underground installations
BS EN 1765:2004 Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam. Specification
BS EN 13913:2003 Railway applications. Rubber suspension components. Elastomer-based mechanical parts
UNE-EN 1817:2011 Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings
BS EN ISO 14890:2013 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
BS EN ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications
BS EN 12770:2000 Footwear. Test methods for outsoles. Abrasion resistance
BS EN 13597:2003 Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
DIN EN 1361:1997-08 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
I.S. EN 15090:2012 FOOTWEAR FOR FIREFIGHTERS
EN ISO 20344:2011 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
DIN EN ISO 15236-1:2017-03 STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE (ISO 15236-1:2016)
DIN EN 15090:2012-04 Footwear for firefighters
UFC 4-150-02 : Change 5 UNIFIED FACILITIES CRITERIA - DOCKSIDE UTILITIES FOR SHIP SERVICE
03/310327 DC : DRAFT SEP 2003 BS 5120 - RUBBER HOSES FOR GAS WELDING, CUTTING AND ALLIED PROCESSES - HIGH KINK RESISTANT WELDING HOSE (TYPE H) - SPECIFICATION
BS 2782-4.465C(1990) : 1990 AMD 10677 METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF MIGRATION OF PLASTICIZERS
BS EN 61854:1998 Overhead lines. Requirements and tests for spacers
14/30296041 DC : 0 BS ISO 23794 - RUBBER, VULCANIZED OR THERMOPLASTIC - ABRASION TESTING - GUIDANCE
PREN 857 : DRAFT 2011 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
12/30256960 DC : 0 BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
BS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
00/712968 DC : DRAFT AUG 2000 ROLLER SPORTS EQUIPMENT - ROLLER SKATES - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 22721:2010-01 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007)
01/122581 DC : DRAFT JUNE 2001 BS PREN 1361 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
14/30288533 DC : 0 BS EN 13634:2010 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
11/30252281 DC : 0 BS EN 856 - HOSE AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
09/30200146 DC : 0 BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
UNE-EN 13634:2016 Protective footwear for motorcycle riders - Requirements and test methods
IEC PAS 60092-510:2009 Electrical installations in ships - Part 510: Special features - High-voltage shore connection systems
15/30293925 DC : 0 BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION
BS EN ISO 22721:2007 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
BS 8451:2004 Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
NF EN 61854 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
CEI EN 61854 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
EN 1645-1:2018 Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety
ISO 20957-8:2017 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods
ISO 1382:2012 Rubber Vocabulary
I.S. EN ISO 12736:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)
EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017)
NFPA 1992 : 2018 LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES
18/30363978 DC : 0 BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
ASTM D 5963 : 2004 : R2010 : EDT 1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
NF EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
ISO 1823-2:1997 Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification
ISO 4632-1:1982 Rubber, vulcanized Classification Part 1: Description of the classification system
DIN EN 13482:2013-12 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
DIN EN 15090 E : 2012 FOOTWEAR FOR FIREFIGHTERS
DIN EN ISO 14890:2013-06 CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR GENERAL USE (ISO 14890:2013)
DIN EN ISO 177:2016-09 (Draft) PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016)
UNE-EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
UNE-EN 1765:2017 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
ISO 14890:2013 Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
BS EN ISO 20344:2011 Personal protective equipment. Test methods for footwear
UNE-EN ISO 20344:2012 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
EN 61854:1998 Overhead lines - Requirements and tests for spacers
ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam — Specification
BS EN ISO 3861:2008 Rubber hoses for sand and grit blasting. Specification
UNE-EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
BS EN 1817:2010 Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings
UNI EN 12199 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
I.S. EN ISO 15236-3:2017 STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017)
I.S. EN 13483:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
I.S. EN ISO 20344:2011 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
I.S. EN ISO 3861:2008 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
DIN EN 1361:2004-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
I.S. EN ISO 15136-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
EN ISO 3861:2008 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
I.S. EN ISO 6807:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION
I.S. EN 12115:2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
I.S. EN ISO 15236-1:2016 STEEL CORD CONVEYOR BELTS - PART 1: DESIGN, DIMENSIONS AND MECHANICAL REQUIREMENTS FOR CONVEYOR BELTS FOR GENERAL USE (ISO 15236-1:2016)
I.S. EN ISO 177:2017 PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016)
I.S. EN ISO 6134:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
I.S. EN 1360:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
DIN EN 1816:2010-11 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS WITH FOAM BACKING
I.S. EN 13787:2002 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13597:2008-04 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
I.S. EN 13482:2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
I.S. EN 1765:2016 RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
I.S. EN 1870-4:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1817:2010-11 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS
BS 3158:1985 Specification for rubber hoses and hose assemblies for aircraft ground fuelling and defuelling
BS 5120:1987 Specification for rubber hoses for gas welding and allied processes
UNI EN ISO 3861 : 2009 RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION
UNE-EN ISO 28017:2012 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011)
14/30260383 DC : 0 BS ISO 16905 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK
09/30210236 DC : 0 BS EN 1816 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS WITH FOAM BACKING
PREN 854 : DRAFT 2011 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
16/30343047 DC : 0 BS EN ISO 20957-8 - STATIONARY TRAINING EQUIPMENT - PART 8: STEPPERS, STAIRCLIMBERS AND CLIMBERS - ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
02/103830 DC : DRAFT MAY 2002 PREN 1646-1 - LEISURE ACCOMMODATION VEHICLES - MOTOR CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
DIN EN 61854 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BS EN ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
DIN EN 1360:2013-09 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
17/30354251 DC : 0 BS EN 1646-1 - LEISURE ACCOMMODATION VEHICLES - MOTOR CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
PREN 856 : DRAFT 2011 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/30125408 DC : DRAFT MAR 2005 EN ISO 15236-3 - STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS
11/30252275 DC : 0 BS EN 854 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
16/30334966 DC : 0 BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
17/30342420 DC : 0 BS EN ISO 19085-13 - WOODWORKING MACHINES - SAFETY - PART 13: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
PD CEN/TR 15990:2010 Data sheets. Footwear tests materials and test adhesives
BS EN 344-1:1993 Safety, protective and occupational footwear for professional use Requirements and test methods
ASTM D 8115 : 2017 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
11/30252284 DC : 0 BS EN 857 - HOSE AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
PREN 13634 : DRAFT 2017 PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 20957-9 E : 2017 STATIONARY TRAINING EQUIPMENT - PART 9: ELLIPTICAL TRAINERS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-9:2016)
PREN 853 : DRAFT 2011 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
ASTM D 3045 : 1992 : R1997 Standard Practice for Heat Aging of Plastics Without Load
NFPA 1991 : 2016 Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies
NFPA 1951 : 2013 PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
CEN/TR 15990:2010/AC:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
IEC PAS 80005-3:2014 Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
I.S. EN ISO 28017:2018 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018)
I.S. EN 61854:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
I.S. EN 45510-4-5:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT
I.S. EN ISO 22721:2007 CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR UNDERGROUND MINING
ISO 10577:2012 Resilient floor coverings — Specification for rubber sheet floor coverings without backing
I.S. EN 16584-3:2017 RAILWAY APPLICATIONS - DESIGN FOR PRM USE - GENERAL REQUIREMENTS - PART 3: OPTICAL AND FRICTION CHARACTERISTICS
BS EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM
ASTM D 378 : 2010 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
EN ISO 20957-8:2017 Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)
EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
ISO 24453:2008 Rubber Acquisition and presentation of comparable single-point data
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
PREN 1816 : DRAFT 2009 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS WITH FOAM BACKING
ASTM D 5963 : 2004 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
EN 388 : 1994 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
ISO 1823-1:1997 Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification
EN ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018)
BS EN 388 : 2016 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
DIN EN ISO 6807:2004-08 Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003)
DIN EN 1645-1:2012-10 LEISURE ACCOMMODATION VEHICLES - CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
DIN EN ISO 177 E : 2017 PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016)
DIN EN ISO 3861:2010-04 Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005)
DIN EN 14521 E : 2004 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR SMOOTH RUBBER FLOOR COVERINGS WITH OR WITHOUT FOAM BACKING, WITH A DECORATIVE LAYER
DIN EN ISO 20344 E : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
DIN EN 12115:2011-04 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011
BS EN 14521:2004 Resilient floor coverings. Specification for smooth rubber floor coverings with or without foam backing with a decorative layer
BS EN 12199:2010 Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
BS EN 1816:2010 Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
UNI EN 1816 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS WITH FOAM BACKING
UNI EN 1817 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS
EN ISO 22721:2007 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007)
BS EN ISO 177:2017 Plastics. Determination of migration of plasticizers
UNI EN ISO 20344 : 2012 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
UNI EN 13482 : 2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
UNI EN 1870-4 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 15090 : 2012 FOOTWEAR FOR FIREFIGHTERS
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
UNI EN 1360 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
UNI EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
UNI EN ISO 14890 : 2013 CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR GENERAL USE
BS ISO/IEC/IEEE 80005-1:2012 Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements
MIL-DTL-26894 Revision D:1998 Hose and Hose Assembly, Rubber, Gasoline, Refueling, Low Temperature
BS ISO 23794:2015 Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
12/30265702 DC : 0 BS ISO 10247 - CONVEYOR BELTS - CHARACTERISTICS OF COVERS - CLASSIFICATION
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
BS EN ISO 12736:2014 Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
CEI UNI EN 45510-4-5 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT
10/30212877 DC : DRAFT JUNE 2010 BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION
I.S. EN 1361:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
09/30176641 DC : 0 BS ISO 10577 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERINGS WITHOUT BACKING
BS ISO 17325-2:2014 Ships and marine technology. Marine environment protection. Oil booms Strength and performance requirements
PREN 1646-1 : DRAFT 2017 LEISURE ACCOMMODATION VEHICLES - MOTOR CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
BS ISO 10575:2012 Resilient floor coverings. Specification for rubber sheet floor coverings with backing
NFPA 197 : 2018 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
11/30250273 DC : 0 BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
PD IEC/PAS 80005-3:2014 Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements
05/30130302 DC : DRAFT MAR 2005 ISO 22721 - CONVEYOR BELTS - SPECIFICATION FOR RUBBER OR PLASTICS COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR UNDERGROUND MINING
13/30227963 DC : 0 BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION
MIL H 26521 : J HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS
07/30161672 DC : 0 BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
08/30183539 DC : DRAFT JUNE 2008 BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION
17/30351919 DC : 0 BS EN 13634 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
09/30176638 DC : 0 BS ISO 10575 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERING WITH BACKING
BS ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service. Specification
10/30235583 DC : 0 BS EN 1646-1 - LEISURE ACCOMMODATION VEHICLES - MOTOR CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
BS ISO 1382:2012 Rubber. Vocabulary
I.S. EN 1646-1:2018 LEISURE ACCOMMODATION VEHICLES - MOTOR CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
NF ISO 10247 : 1991 AMD 1 2006 CONVEYOR BELTS - CHARACTERISTICS OF COVERS - CLASSIFICATION
BS ISO 19003:2006 Rubber and rubber products. Guidance on the application of statistics to physical testing
02/103829 DC : DRAFT MAY 2002 PREN 1645-1 - LEISURE ACCOMMODATION VEHICLES - CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
09/30203310 DC : 0 BS EN 15090 - FOOTWEAR FOR FIREFIGHTERS
03/300797 DC : DRAFT JAN 2003 EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION
BS EN 16584-3:2017 Railway applications. Design for PRM use. General requirements Optical and friction characteristics
NFPA 1994 : 2018 PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS
DIN EN 1762:2016-09 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
I.S. EN 13634:2017 PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification
BS EN ISO 20957-8:2017 Stationary training equipment Steppers, stairclimbers and climbers. Additional specific safety requirements and test methods
EN 13634:2017 Protective footwear for motorcycle riders - Requirements and test methods
ASTM D 5963 : 2004 : R2015 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
PREN 13482 : DRAFT 2012 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
ISO 16365-2:2014 Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
UNI EN 1646-1 : 2012 LEISURE ACCOMMODATION VEHICLES - MOTOR CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
PREN 1762 : DRAFT 2018 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
I.S. EN 1762:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
ISO 20871:2018 Footwear — Test methods for outsoles — Abrasion resistance
I.S. EN 1645-1:2012 LEISURE ACCOMMODATION VEHICLES - CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
I.S. EN ISO 1825:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017)
S.R. CEN TR 15990:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
NF EN 1817 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS
IEC 61854:1998 Overhead lines - Requirements and tests for spacers
DIN EN ISO 6134:2015-10 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
UNE-EN 15090:2012 Footwear for firefighters
UNE-EN ISO 15236-1:2017 Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)
BS EN 1361:2004 Rubber hoses and hose assemblies for aviation fuel handling. Specification
BS EN 344 : 93 AMD 2 REPRINT REQUIREMENTS AND TEST METHODS FOR SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE
DIN EN ISO 20344:2013-02 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
EN 1817:2010 Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings
BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
EN 12199:2010 Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings
I.S. EN 1817:2010 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS
UNE-EN 1645-1:2013 Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety
UNE-EN 12199:2011 Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings
ISO 22721:2007 Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
ISO 177:2016 Plastics Determination of migration of plasticizers
UNE-EN 13482:2014 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
ISO 3861:2005 Rubber hoses for sand and grit blasting Specification
ISO 15236-1:2016 Steel cord conveyor belts Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
BS EN 1870-4:2012 Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
BS EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
I.S. EN 12199:2010 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
I.S. EN 1816:2010 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS WITH FOAM BACKING
ISO 15236-3:2017 Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations
BS EN ISO 15236-1:2016 Steel cord conveyor belts Design, dimensions and mechanical requirements for conveyor belts for general
BS EN 15090:2012 Footwear for firefighters
ISO 12736:2014 Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
EN 1816:2010 Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
BS EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
EN 13899:2003 Roller sports equipment - Roller skates - Safety requirements and test methods
EN 1646-1:2018 Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety
EN 16584-3:2017 Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics
EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
EN ISO 6807 : 2003 RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION
EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery - Specification
EN 15090:2012 Footwear for firefighters
EN ISO 15236-1:2016 Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)
EN 14521:2004 Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer
EN ISO 15236-3:2017 Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017)
EN 344:1992/A1:1997 REQUIREMENTS AND TEST METHODS FOR SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE
EN 1361 : 2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
EN 1765:2016 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
EN ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017)
EN 13913:2003 Railway applications - Rubber suspension components - Elastomer-based mechanical parts
EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
EN 13597:2003 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
EN ISO 14890:2013 Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)
EN ISO 12736:2014 Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014)
EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
EN 45510-4-5:2002 Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant
EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
ISO 19003:2006 Rubber and rubber products — Guidance on the application of statistics to physical testing
API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
PREN 1817 : DRAFT 2009 RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS
BS 7825-3.4:1998 Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of rubber
UNE-EN ISO 20957-9:2017 Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
11/30252272 DC : 0 BS EN 853 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
BS ISO 10577:2012 Resilient floor coverings. Specification for rubber sheet floor coverings without back
10/30235580 DC : 0 BS EN 1645-1 - LEISURE ACCOMMODATION VEHICLES - CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
BS ISO 17325-1:2014 Ships and marine technology. Marine environment protection. Oil booms Design requirements
PREN 1360 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
13/30275849 DC : 0 BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
ISO 2928:2003 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification
02/122964 DC : DRAFT JULY 2002 PREN 14521 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR SMOOTH RUBBER FLOOR COVERINGS WITH OR WITHOUT FOAM BACKING AND WITH DECORATIVE LAYER
09/30210233 DC : 0 BS EN 12199 - RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
BS EN 45510-4-5:2002 Guide for the procurement of power station equipment. Boiler auxiliaries Coal handling and bulk storage plant
DIN EN ISO 28017:2015-12 RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015)
11/30250270 DC : 0 BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
17/30371001 DC : 0 BS EN 4864 - AEROSPACE SERIES - ENVIRONMENTAL TESTING - HIGH DYNAMIC ABRASION, MAR, SCRATCH AND PUNCH TEST IN CABIN INTERIOR
08/30165015 DC : DRAFT FEB 2008 BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION
ASTM D 378 : 2010 : R2016 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
UNI EN 1645-1 : 2012 LEISURE ACCOMMODATION VEHICLES - CARAVANS - PART 1: HABITATION REQUIREMENTS RELATING TO HEALTH AND SAFETY
MIL-DTL-26521 Revision L:2014 Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings
BS 7825-3.8:1998 Calibration of rubber and plastics test equipment. Calibration schedules Degradation and environmental properties
BS ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification
IEC/ISO/IEEE 80005-1:2012 Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
07/30163692 DC : 0 BS EN 15651-3 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 3: SEALANTS FOR SANITARY JOINTS
ASTM D 5963 : 2004 : R2010 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
UNE-EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
I.S. EN ISO 20957-9:2016 STATIONARY TRAINING EQUIPMENT - PART 9: ELLIPTICAL TRAINERS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-9:2016)
ISO 10247:1990 Conveyor belts Characteristics of covers Classification
ISO 17325-2:2014 Ships and marine technology Marine environment protection Oil booms Part 2: Strength and performance requirements
ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification
ISO 17325-1:2014 Ships and marine technology Marine environment protection Oil booms Part 1: Design requirements
I.S. EN 388:2016 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
PREN 15090 : DRAFT 2009 FOOTWEAR FOR FIREFIGHTERS
DIN EN ISO 20957-9:2014-06 (Draft) STATIONARY TRAINING EQUIPMENT - PART 9: ELLIPTICAL TRAINERS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-9:2016)
ISO 20957-9:2016 Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods
DIN EN 12199:2010-11 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
DIN EN 1870-4:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
NF EN 12199 : 2010 RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS
UNE-EN 1816:2011 Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
ISO 20344:2011 Personal protective equipment Test methods for footwear
UNE-EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
BS EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery. Specification
EN 12770 : 1999 FOOTWEAR - TEST METHODS FOR OUTSOLES - ABRASION RESISTANCE
UNI EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
DIN EN ISO 6134:2006-02 RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017)
DIN EN 1762:2004-07 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
DIN EN 45510-4-5:2002-11 Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant
DIN EN 13899:2003-05 ROLLER SPORTS EQUIPMENT - ROLLER SKATES - SAFETY REQUIREMENTS AND TEST METHODS
EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
DIN EN 14521:2004-09 Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer
DIN EN ISO 15236-3:2008-04 STEEL CORD CONVEYOR BELTS - PART 3: SPECIAL SAFETY REQUIREMENTS FOR BELTS FOR USE IN UNDERGROUND INSTALLATIONS (ISO 15236-3:2017)
EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
DIN EN 13913:2003-08 RAILWAY APPLICATIONS - RUBBER SUSPENSION COMPONENTS - ELASTOMER-BASED MECHANICAL PARTS
ONORM EN ISO 12736 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)

ISO 9298:2017 Rubber compounding ingredients — Zinc oxide — Test methods
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
ISO 19983:2017 Rubber — Determination of precision of test methods
ISO 23794:2015 Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
ISO 2230:2002 Rubber products — Guidelines for storage
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
ISO 18899:2013 Rubber — Guide to the calibration of test equipment
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density

View more information
US$150.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.