ISO 5389:2005
Current
Current
The latest, up-to-date edition.
Turbocompressors — Performance test code
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
12-15-2005
ISO 5389:2005 applies to performance tests on turbocompressors of all types. ISO 5389:2005 does not apply to fans and high-vacuum pumps, or to jet-type compressors with moving drive components
Turbocompressors comprise machines in which inlet, compression and discharge are continuous flow processes. The gas is conveyed and compressed in impellers and decelerated with further increase in pressure in fixed vaned or vaneless stators.
ISO 5389:2005 is intended to provide standard provisions for the preparation, procedure, evaluation and assessment of performance tests on compressors as specified above. The acceptance test of the performance is based on this performance test code. Acceptance tests are intended to demonstrate fulfilment of the order conditions and guarantees specified in the contract.
| DevelopmentNote |
Supersedes ISO/DIS 5389 (12/2005)
|
| DocumentType |
Standard
|
| Pages |
142
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 5389:2006 | Identical |
| NF ISO 5389 : 2006 | Identical |
| NEN ISO 5389 : 2006 | Identical |
| BS ISO 5389:2005 | Identical |
| NBN E 51 006 : 1989 | Identical |
| I.S. EN ISO 10439:2002 | PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| BS ISO 13380:2002 | Condition monitoring and diagnostics of machines. General guidelines on using performance parameters |
| BS EN ISO 10442:2002 | Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors |
| BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
| BS EN ISO 10439:2002 | Petroleum, chemical and gas service industries. Centrifugal compressors |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| I.S. EN ISO 10439-3:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 3: INTEGRALLY GEARED CENTRIFUGAL COMPRESSORS (ISO 10439-3:2015) |
| 10/30231436 DC : 0 | BS EN ISO 10439-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 2: NON-INTEGRALLY GEARED CENTRIFUGAL AND AXIAL COMPRESSORS |
| BS EN ISO 10439-3:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors Integrally geared centrifugal compressors |
| I.S. EN ISO 10439-2:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 2: NON-INTEGRALLY GEARED CENTRIFUGAL AND AXIAL COMPRESSORS (ISO 10439-2:2015) |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| DIN EN 12952-15 E : 2004 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 15: ACCEPTANCE TESTS |
| I.S. EN ISO 2151:2008 | ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
| BS 7321:1990 | Specification for design and construction of turbo-type compressors for the process industry |
| BS ISO 18740:2016 | Turbocompressors. Performance test code. Simplified acceptance test |
| UNI ISO 13380 : 2010 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON USING PERFORMANCE PARAMETERS |
| 10/30231440 DC : 0 | BS EN ISO 10439-3 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 3: INTEGRALLY GEARED CENTRIFUGAL COMPRESSORS |
| 00/702358 DC : DRAFT JAN 2000 | ISO/DIS 13380 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - USE OF PERFORMANCE PARAMETERS - GENERAL GUIDELINES |
| DIN ISO 17359:2011-09 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| BS EN ISO 5801:2017 | Fans. Performance testing using standardized airways |
| 17/30341578 DC : DRAFT MAY 2017 | BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| API 672 : 2004 | PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN ISO 2151 : 2008 | ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
| ISO 18740:2016 | Turbocompressors Performance test code Simplified acceptance test |
| 10/30200372 DC : 0 | BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| 14/30284736 DC : 0 | BS EN ISO 5801 - FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
| ISO 17359:2018 | Condition monitoring and diagnostics of machines — General guidelines |
| EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
| DIN EN ISO 2151:2009-01 | ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2) |
| BS EN ISO 2151:2004 | Acoustics. Noise test code for compressors and vacuum pumps. Engineering method (Grade 2) |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| EN ISO 2151:2008 | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) |
| EN ISO 10439-3:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors (ISO 10439-3:2015) |
| EN ISO 10439-2:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors (ISO 10439-2:2015) |
| EN ISO 10442:2002 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002) |
| EN ISO 10439:2002 | Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002) |
| BS EN ISO 10439-2:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors Non-integrally geared centrifugal and axial compressors |
| 15/30275843 DC : 0 | BS ISO 18740 - TURBOCOMPRESSORS - PERFORMANCE TEST CODE - SIMPLIFIED ACCEPTANCE TEST |
| 95/710815 DC : DRAFT AUG 1995 | PREN 12076 - MEASUREMENT OF NOISE EMISSION FROM COMPRESSORS AND VACUUM PUMPS (ENGINEERING METHOD) |
| I.S. EN ISO 5801:2017 | FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS (ISO 5801: 2017) |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| NF ISO 7183 : 1989 | COMPRESSED AIR DRYERS - SPECIFICATIONS AND TESTS |
| ISO 13380:2002 | Condition monitoring and diagnostics of machines General guidelines on using performance parameters |
| ISO 8011:1988 | Compressors for the process industry Turbo types Specifications and data sheets for their design and construction |
| ISO 10439-2:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 2: Non-integrally geared centrifugal and axial compressors |
| ISO 2151:2004 | Acoustics Noise test code for compressors and vacuum pumps Engineering method (Grade 2) |
| ISO 10439-3:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 3: Integrally geared centrifugal compressors |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| VDI/VDE 2640 Blatt 3:1983-11 | Measurement of gas flow in circular; annular or rectangular sections of conduits velocity area method |
| VDI 2048:1978-06 | Inaccuracies at acceptance test measurements; fundamental principles |
| VDI 2045 Blatt 1:1993-08 | Acceptance and performance tests on turbo compressors and displacement compressors; test procedure and comparison with guaranteed values |
| VDI/VDE 2041:1991-04 | Measurement of fluid flow with primary devices; orifice plates and nozzles for special applications |
| VDI/VDE 2040 Blatt 1:1991-01 | Calculation principles for the measurement of fluid flow - Using orifice plates, nozzles and venturi tubes - Deviations and supplements to DIN 1952 |
| VDI 2045 Blatt 2:1993-08 | Acceptance and performance tests on turbo compressors and displacement compressors; theory and examples |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
US$251.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.