• There are no items in your cart

ISO 5660-1:2015

Current
Current

The latest, up-to-date edition.

Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

03-20-2015

ISO 5660-1:2015 specifies a method for assessing the heat release rate and dynamic smoke production rate of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external igniter. The heat release rate is determined by measurement of the oxygen consumption derived from the oxygen concentration and the flow rate in the combustion product stream. The time to ignition (sustained flaming) is also measured in this test.

The dynamic smoke production rate is calculated from measurement of the attenuation of a laser light beam by the combustion product stream. Smoke obscuration is recorded for the entire test, regardless of whether the specimen is flaming or not.

DevelopmentNote
Supersedes ISO/FDIS 5660-1 & ISO 5660-2. (03/2015)
DocumentType
Standard
Pages
59
ProductNote
NEW CHILD AMD 1 2019 IS NOW ADDED
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
SS-ISO 5660-1:2019 Identical
NF ISO 5660-1 : 2015 Identical
BS ISO 5660-1:2015 Identical
JIS A 1316:2022 Identical

PD CEN/TS 15912:2012 Durability of reaction to fire performance. Classes of fire-retardant treated wood-based product in interior and exterior end use applications
DD IEC/TS 60695-8-3:2008 Fire hazard testing Heat release. Heat release of insulating liquids used in electrotechnical products
07/30173831 DC : 0 BS EN 15004-1 - FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
CEI UNI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
BS ISO/TR 14696:1999 Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)
16/30342722 DC : 0 BS ISO 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES
UNE-EN 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
XP CEN/TS 14972 : 2011 XP FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
BS EN 16755:2017 Durability of reaction to fire performance. Classes of fire-retardant treated wood products in interior and exterior end use applications
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
ONORM ONR CEN/TS 14972 : 2011 FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION (CEN/TS 14972:2011)
07/30147204 DC : 0 BS 476-10 - FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS
14/30295822 DC : 0 BS 8489-7 - FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 7: TESTS AND REQUIREMENTS FOR WATERMIST SYSTEMS FOR THE PROTECTION OF LOW HAZARD OCCUPANCIES
13/30275218 DC : 0 BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE
06/30117321 DC : DRAFT SEP 2006 ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY
10/30228138 DC : 0 BS ISO 15779 - CONDENSED-AEROSOL FIRE-EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS FOR COMPONENTS AND SYSTEM DESIGN, INSTALLATION AND MAINTENANCE - GENERAL REQUIREMENTS
BS ISO 17554:2014 Reaction to fire tests. Mass loss measurement
DD ISO/TS 14934-4:2007 Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests
PD CEN/TR 15276-1:2009 Fixed firefighting systems. Condensed aerosol extinguishing systems Requirements and test methods for components
ISO 24473:2008 Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
S.R. CEN/TS 15912:2012 DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS
BS EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
UNI EN 15004-1 : 2008 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
UNI EN ISO 25762 : 2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
ASTM E 1354 : 2017 : REDLINE Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ISO 12828-2:2016 Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods
XP CEN/TS 45545-2 : 2009 XP RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
ISO 5660-2:2002 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
ISO/TR 5660-3:2003 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement
NFPA 555 : 2017 METHODS FOR EVALUATING POTENTIAL FOR ROOM FLASHOVER
UNE-EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
BS EN ISO 5659-2:2017 Plastics. Smoke generation Determination of optical density by a single-chamber test
CEN/TS 14972:2011 Fixed firefighting systems - Watermist systems - Design and installation
EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
EN 16755:2017 Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
EN 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
BS 6203:2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
DEFSTAN 07-247(PT1)/2(2006) : 2006 THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS
DEFSTAN 07-247(PT1)/3(2009) : 2009 THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS
IEC TS 60695-1-40:2002 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
ISO 17554:2014 Reaction to fire tests Mass loss measurement
06/30116005 DC : DRAFT MAY 2006 ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS
04/19990095 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
BS ISO TR 9705-2:2001 Reaction to fire tests. Full scale room tests for surface products Technical background and guidance
DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
BS ISO 11907-4:1998 Plastics. Smoke generation. Determination of the corrosivity of fire effluents Dynamic decomposition method using a conical radiant heater
CEN/TR 14745:2003 Solid Recovered Fuels
PD CEN/TR 14745:2003 Solid recovered fuels
05/30103142 DC : 0 BS EN 15276 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISO/TR 13387-4:1999 Fire safety engineering Part 4: Initiation and development of fire and generation of fire effluents
BS ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests
BS ISO TR 11925-1:1999 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Guidance on ignitability
04/30119106 DC : DRAFT AUG 2004 EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
DIN EN 45545-2:2016-02 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
AFAP-1 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS
ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials — Their development and application
I.S. EN 45545-2:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
ISO/TS 5660-4:2016 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release
ISO 19703:2010 Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
S.R. CEN TR 15276-1:2009 FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
S.R. CEN/TS 45545-2:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
ASTM E 2102 : 2017 : REDLINE Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM F 3214 : 2018 Standard Practice for Characterization of Fire Properties of Materials Specified for Vehicles Associated with Amusement Rides and Devices
EN 15004-1:2008 Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified)
DIN EN ISO 5659-2:2016-02 (Draft) PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
IEC 60695-8-1:2016 Fire hazard testing - Part 8-1: Heat release - General guidance
03/317997 DC : DRAFT DEC 2003 ISO/DIS 6182-10 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 10: REQUIREMENTS AND TEST METHODS FOR DOMESTIC SPRINKLERS
PD IEC/TR 60695-1-21:2008 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
I.S. EN ISO 5659-2:2017 PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
DIN EN 15004-1:2008-09 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN ISO 15791-1:2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014)
I.S. EN ISO 13927:2015 PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR (ISO 13927:2015)
BS 476-10:2009 Fire tests on building materials and structures Guide to the principles, selection, role and application of fire testing and their outputs
UNI CEI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
01/124426 DC : 0 ISO/CD 21367 - PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTATED SPECIMENS
08/30183661 DC : DRAFT SEP 2008 BS ISO 29473 - FIRE TESTS - UNCERTAINTY OF MEASUREMENTS IN FIRE TESTS
10/30216687 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
13/30234849 DC : 0 BS EN ISO 13927 - PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR
BS ISO TR 5658-1:1997 Reaction to fire tests. Spread of flame Guidance on flame spread
18/30369843 DC : DRAFT APR 2018 BS ISO 11907-1 - PLASTICS - SMOKE GENERATION - DETERMINATION OF THE CORROSIVITY OF FIRE EFFLUENTS - PART 1: GENERAL REQUIREMENTS AND APPLICABILITY
UNI CEN/TS 15912 : 2012 DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS
14/30287765 DC : 0 BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
BS EN 60695-1-20:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance
BS ISO/TR 11696-2:1999 Uses of reaction to fire test results Fire hazard assessment of construction products
NF ISO 21367 : 2008 PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTED SPECIMENS
BS ISO/TR 11696-1:1999 Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products
PD ISO/TS 5660-4:2016 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release
BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests
BS ISO 12828-1:2011 Validation method for fire gas analysis Limits of detection and quantification
CEI EN 60695-8-1 : 2009 FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE
I.S. EN 60695-8-2:2017 FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
FM 5580 : 2012 HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS
ISO/TR 11925-1:1999 Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
UNE-EN 60695-8-1:2017 Fire hazard testing - Part 8-1: Heat release - General guidance
CEI 89-37 : 2014 FIRE HAZARD TESTING - PART 8-3: HEAT RELEASE - HEAT RELEASE OF INSULATING LIQUIDS USED IN ELECTROTECHNICAL PRODUCTS
BS 7825-3.9:1998 Calibration of rubber and plastics test equipment. Calibration schedules Flammability characteristics
PREN 15004-1 : DRAFT 2016 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE (ISO 14520-1:2015, MODIFIED)
ISO 12828-1:2011 Validation method for fire gas analysis — Part 1: Limits of detection and quantification
ISO 11907-4:1998 Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
ISO 29473:2010 Fire tests — Uncertainty of measurements in fire tests
S.R. CEN/TS 14972:2011 FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
UNE-EN 16755:2018 Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
ISO/TS 14934-4:2007 Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
ISO/TR 16312-2:2007 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models
BS EN 15004-1:2008 Fixed firefighting systems. Gas extinguishing systems Design, installation and maintenance
UNE-CEN/TS 15912:2012 EX Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications
ASTM E 1623 : 2016 : REDLINE Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
UNI CEN/TS 14972 : 2011 FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION
ISO 14934-4:2014 Fire tests Calibration and use of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
IEC TS 60695-8-3:2008 Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products
ISO/TS 5660-3:2012 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
ISO 21367:2007 Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
ISO/TS 14934-1:2002 Fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles
IEC TR 60695-8-2:2008 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
DIN EN ISO 13927:2015-08 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
BS EN 60695-1-21:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
IEC 60695-6-2:2011 Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
IEC 60695-1-20:2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
ISO/TR 10093:2017 Plastics Fire tests Standard ignition sources
EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
UNI EN ISO 15791-1 : 2014 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
BS ISO/TR 14697:1997 Fire tests. Guidance on the choice of substrates for building products
AFAP-5 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - HEAT RELEASE RATE
BS DD8489-7(2011) : 2011 FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 7: TESTS AND REQUIREMENTS FOR WATERMIST SYSTEMS FOR THE PROTECTION OF LOW HAZARD OCCUPANCIES
BS 8489-7:2016 Fixed fire protection systems. Industrial and commercial watermist systems Tests and requirements for watermist systems for the protection of low hazard occupancies
14/30274909 DC : 0 BS EN 15004-1 - FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN 60695-1-21:2016 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
BS ISO 25762 : 2009 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
17/30353409 DC : 0 BS 15276-1 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
10/30237345 DC : DRAFT DEC 2010 BS 6853 AMD2 - CODE OF PRACTICE FOR FIRE PRECAUTIONS IN THE DESIGN AND CONSTRUCTION OF PASSENGER CARRYING TRAINS
BS ISO/TR 13387-4:1999 Fire safety engineering Initiation and development of fire and generation of fire effluents
ASTM E 2067 : 2015 : REDLINE Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
BS DD246(1999) : 1999 RECOMMENDATIONS FOR THE USE OF THE CONE CALORIMETER
UNI CEI 11170-3 : 2005 RAILWAY AND TRAMWAY VEHICLES - GUIDELINES FOR FIRE PROTECTION OF RAILWAY, TRAMWAY AND GUIDED PATH VEHICLES - EVALUATION OF FIRE BEHAVIOUR OF MATERIALS - LIMITS OF ACCEPTANCE
08/30192184 DC : 0 ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY
09/30196057 DC : DRAFT FEB 2009 BS ISO 15779 - CONDENSED-AEROSOL FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - GENERAL REQUIREMENTS
ISO/TS 17431:2006 Fire tests Reduced-scale model box test
UNI CEN/TR 15276-1 : 2009 FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
CEN/TR 15276-1:2009 Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components
PD ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace
14/30280977 DC : 0 BS ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY
UNI CEI CEN/TS 45545-2 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
PD ISO/TR 16576:2017 Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria
BS ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
DD ISO/TS 5658-1:2006 Reaction to fire tests. Spread of flame Guidance on flame spread
ASTM E 1740 : 2015 : REDLINE Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
UNE-CEN/TS 14972:2014 Fixed firefighting systems - Watermist systems - Design and installation
DD CEN/TS 45545-2:2009 Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components
I.S. EN ISO 25762:2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
ISO/TR 17252:2008 Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering
I.S. EN 60695-1-20:2016 FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE
I.S. EN 60695-8-1:2017 FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE
ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
PREN 15276-1 : DRAFT 2017 FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISO 5660-4:2008 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility
ISO/TR 13571-2:2016 Life-threatening components of fire Part 2: Methodology and examples of tenability assessment
ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
ISO 14934-3:2012 Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
ISO/TR 10840:1993 Plastics Burning behaviour Guidance for development and use of fire tests
IEC TR 60695-1-21:2008 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
UNE-EN ISO 13927:2016 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
ISO 13927:2015 Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
BS IEC/TS 60695-8-2:2001 Fire hazard testing. Heat release Summary and relevance of test methods
BS EN 60695-8-2:2017 Fire hazard testing Heat release. Summary and relevance of test methods
IEC 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
UNE-EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
UNE-EN ISO 5659-2:2018 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
03/112565 DC : DRAFT AUG 2003 ISO 6182-9 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEM - PART 9: REQUIREMENTS AND TEST METHODS FOR WATER MIST NOZZLES
ISO 6182-9:2005 Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles
12/30228745 DC : 0 BS ISO 6182-10 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 10: REQUIREMENTS AND TEST METHODS FOR DOMESTIC SPRINKLERS
BS EN ISO 13927:2015 Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
ISO 6182-10:2014 Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers
ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
ISO 25762:2009 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
I.S. EN 16755:2017 DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD PRODUCTS IN INTERIOR AND EXTERIOR END USE APPLICATIONS
ISO 14520-1:2015 Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements
BS ISO TR 9122-4:1993 Toxicity testing of fire effluents The fire model (furnaces and combustion apparatus used in small-scale testing)
DIN EN 15004-1:2016-09 (Draft) FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
BS EN 60695-8-1:2017 Fire hazard testing Heat release. General guidance
13/30292037 DC : 0 BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS
IEC TS 60695-8-2:2000 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
06/30133753 DC : DRAFT MAY 2006 ISO 24473 - FIRE TESTS - OPEN CALORIMETRY - MEASUREMENT OF THE RATE OF PRODUCTION OF HEAT AND COMBUSTION PRODUCTS FOR FIRES OF UP TO 20MW
08/30154274 DC : DRAFT MAR 2008 BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES
PD ISO/TS 5660-3:2012 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement
PD ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials. Their development and application
15/30318694 DC : 0 BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD
06/30153120 DC : DRAFT JULY 2006
13/30246948 DC : 0 BS ISO 17554 - REACTION TO FIRE TESTS - MASS LOSS MEASUREMENT
BS ISO 14697:2007 Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
IEC 60695-1-12:2015 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
BS ISO 14520-1:2006 Gaseous fire-extinguishing systems. Physical properties and system design General requirements
UNE-EN 45545-2:2013 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
ISO/TR 16576:2017 Fire safety engineering Examples of fire safety objectives, functional requirements and safety criteria
ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace
I.S. EN 15004-1:2008 FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
FD CEN/TR 15276-1 : 2009 FD FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISO/TS 5658-1:2006 Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
ISO 29904:2013 Fire chemistry Generation and measurement of aerosols
ISO 15928-4:2017 Houses — Description of performance — Part 4: Fire safety
ISO/TR 11696-2:1999 Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
DIN EN ISO 15791-1:2014-05 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
13/30277762 DC : 0 BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
UNE-EN 60695-1-21:2017 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
PD IEC/TR 60695-8-2:2008 Fire hazard testing Heat release. Summary and relevance of test methods
ISO 5659-2:2017 Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
CEN/TS 45545-2:2009 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
CEN/TS 15912:2012 Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications
EN 60695-1-20 : 2016 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance
EN 60695-8-1:2017 Fire hazard testing - Part 8-1: Heat release - General guidance

ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 5657:1997 Reaction to fire tests Ignitability of building products using a radiant heat source
DIN 50055:1989-03 LIGHT MEASURING BEAM FOR TESTING SMOKE DEVELOPMENT
ISO/TS 14934-1:2002 Fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles
ISO 13943:2017 Fire safety — Vocabulary
ISO/TR 3814:1989 Tests for measuring "reaction-to-fire" of building materials — Their development and application
BS 6809:1987 Method for calibration of radiometers for use in fire testing
ASTM E 662 : 2017-02 TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS 7904:1998 Guide to smoke measurement units. Their basis and use in smoke opacity test methods
ISO 5725:1986 Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
AS/NZS 1720.4:2019 Timber structures Fire resistance of timber elements
ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
ASTM E 1354 : 2017 : REDLINE Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

View more information
US$225.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.