• There are no items in your cart

ISO 5725-4:1994

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

03-30-2020

Language(s)

English, French

Published date

12-22-1994

Provides basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied. In order that the measurements are made in the same way, it is important that the measurement method has been standardized. Can be applied only if the accepted reference value can be established as a conventional true value, e.g. by measurement standards or suitable reference materials or by referring to a reference measurement method or by preparation of a known sample.

DevelopmentNote
Along with ISO 5725-1, ISO 5725-2, ISO 5725-3, ISO 5725-5 and ISO 5725-6, it supersedes ISO 5725. (04/2001) Supersedes NEN ISO 5725. (01/2003)
DocumentType
Standard
Pages
23
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

DIN EN 15428 E : 2007 SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION
09/30187538 DC : 0 BS EN 15979 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION
14/30261903 DC : 0 BS EN 16711-1 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION
BS EN ISO 13843:2017 Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods
10/30218038 DC : DRAFT MAY 2010 BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION
DIN EN ISO/IEC 17043 E : 2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
02/101929 DC : DRAFT FEB 2002 PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION
BS EN ISO/IEC 17043:2010 Conformity assessment. General requirements for proficiency testing
I.S. EN 12506:2003 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CL[-], CO, CR, CR (6), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN
04/30114476 DC : DRAFT JUN 2004 EN 14938-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD
04/30114470 DC : DRAFT JUN 2004 EN 14937-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 1: SPECTROMETRIC METHOD
I.S. EN ISO 14720-1:2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013)
08/30181397 DC : DRAFT APR 2008 BS EN 60456 - CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
I.S. EN ISO 14720-2:2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013)
PD 6644-1:1999 Proficiency testing by interlaboratory comparisons Development and operation of proficiency testing schemes
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
BIS IS 15393-6 : 2003(R2009) ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES
15/30327269 DC : 0 BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
09/30187541 DC : 0 BS EN 15991 - TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV)
I.S. EN 16466-1:2013 VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 1: [2]H-NMR ANALYSIS OF ACETIC ACID
BS EN 16466-3:2013 Vinegar. Isotopic analysis of acetic acid and water <sup>18</sup>O-IRMS analysis of water in wine vinegar
DIN EN 15991:2016-02 TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV)
BS EN 16466-2:2013 Vinegar. Isotopic analysis of acetic acid and water <sup>13</sup>C-IRMS analysis of acetic acid
17/30319520 DC : 0 BS ISO 20289 - SURFACE CHEMICAL ANALYSIS - TOTAL REFLECTION X-RAY FLUORESCENCE ANALYSIS OF WATER SAMPLES
04/30118518 DC : DRAFT AUG 2004 EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD
DIN EN 16466-2:2013-03 Vinegar - Isotopic analysis of acetic acid and water - Part 2: <(hoch)13>C-IRMS analysis of acetic acid
11/30227624 DC : 0 BS EN ISO 14720-2 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP/AES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW
BS EN ISO 11876:2010 Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method
11/30218023 DC : 0 BS EN ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
04/30114464 DC : DRAFT JUN 2004 EN 14936-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 1: TITRIMETRIC METHOD
BS 6043-3.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
14/30283682 DC : 0 BS ISO 14707 - SURFACE CHEMICAL ANALYSIS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (GD-OES) - INTRODUCTION TO USE
BS ISO 11877:2008 Hardmetals. Determination of silicon in cobalt metal powders. Photometric method
ISO/TR 24498:2006 Paper, board and pulps Estimation of uncertainty for test methods
04/30118511 DC : DRAFT AUG 2004 EN 15022-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD
BS ISO 15112 : 2011 NATURAL GAS - ENERGY DETERMINATION
03/306294 DC : DRAFT APR 2003 EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHIC ANALYSIS
CSA ISO 10012 : 2003 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
BIS IS/ISO 10012 : 2003(R2009) MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
ISO/TS 21748:2004 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
07/30163069 DC : 0 BS EN 14123 - FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP
ISO 11877:2008 Hardmetals — Determination of silicon in cobalt metal powders — Photometric method
ISO 12985-1:2000 Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 1: Determination of apparent density using a dimensions method
UNE-EN 16466-2:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 2: 13C-IRMS analysis of acetic acid
ISO 22514-7:2012 Statistical methods in process management Capability and performance Part 7: Capability of measurement processes
I.S. EN 60456:2016 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
CEI UNI 70099 : 2010 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
I.S. EN ISO 18369-1:2017 OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2017, CORRECTED VERSION 2017-10-01)
ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
S.R. CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
UNI CEN/TS 16011 : 2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
ISO 12985-2:2000 Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 2: Determination of apparent density and of open porosity using a hydrostatic method
I.S. EN ISO 15112:2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
UNE-EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
CEI UNI EN ISO/IEC 17025 : 2008 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
UNE-EN 16466-1:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 1: 2H-NMR analysis of acetic acid
I.S. EN 16466-2:2013 VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 2: [13]C-IRMS ANALYSIS OF ACETIC ACID
IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance
DIN EN 14242 E : 2004 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS
DIN EN 14185-2:2006-08 Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column
DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
DIN EN ISO 20743 E : 2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
BS EN 12697-38:2004 Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration
BS EN 14524:2004 Foodstuffs. Determination of okadaic acid in mussels. HPLC method with solid phase extraction clean-up, derivatization and fluorimetric detection
BS EN 14123:2003 Foodstuffs. Determination of aflatoxin B<sub>1</sub> and the sum of aflatoxin B<sub>1</sub>, B<sub>2</sub>, G<sub>1</sub> and G<sub>2</sub> in peanuts, pistachios, figs, and paprika powder. High performance liquid chromatographic method with postcolumn derivatization and immunoaffinity column clean-up
BS EN 10184:2006 Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method
ISO 14720-1:2013 Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement methods
ISO/IEC 17043:2010 Conformity assessment — General requirements for proficiency testing
BS EN ISO 9913-2:2000 Optics and optical instruments. Contact lenses Determination of oxygen permeability and transmissibility by the coulometric method
BS EN ISO 14111:1999 Natural gas. Guidelines to traceability in analysis
I.S. EN ISO 20743:2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
I.S. EN 61223-2-6:2007 EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT
DIN EN 12506:2003-09 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN
CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
EN 12506:2003 Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
DIN EN 15062:2006-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
EN 13503-3 : 2000 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
EN ISO 11979-3:2012 Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012)
EN 10184:2006 Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method
DIN EN 14242:2004-12 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
CR 14377:2002 Air quality - Approach to uncertainty estimation for ambient air reference measurement methods
BS EN ISO 7235:2009 Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
I.S. EN 14242:2004 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS
09/30205176 DC : 0 ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY
DIN EN ISO 14720-2:2013-06 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013)
I.S. EN ISO 11876:2010 HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
DIN EN 16711-2 E : 2016 TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION
11/30227621 DC : DRAFT MAY 2011 BS EN ISO 14720-1 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS
04/30103818 DC : DRAFT JUL 2004 ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
04/30114467 DC : DRAFT JUN 2004 EN 14936-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 2: FAAS METHOD
BS ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
I.S. CR 14377:2002 AIR QUALITY - APPROACH TO UNCERTAINTY ESTIMATION FOR AMBIENT AIR REFERENCE MEASUREMENT METHODS
BS EN 61223-3-5:2004 Evaluation and routine testing in medical imaging departments Acceptance tests - Imaging performance of computed tomography X-ray equipment
16/30310656 DC : 0 BS EN ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS
04/30118515 DC : DRAFT AUG 2004 EN 15022-4 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FAAS METHOD
BS EN ISO 14720-2:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
03/304751 DC : DRAFT APR 2003 IEC 61223-3-5 ED.1.0 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT
04/30114482 DC : DRAFT JUN 2004 EN 14940-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 2: FAAS METHOD
04/30118503 DC : DRAFT AUG 2004 EN 15025 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FAAS METHOD
12/30237514 DC : 0 BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
I.S. EN 13503-3:2000 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
ANSI CGATS/ISO 15790 : 2005(R2007) GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY
04/30114488 DC : DRAFT JUN 2004 EN 14942-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ARSENIC CONTENT - PART 2: FAAS METHOD
UNI EN ISO 11876 : 2010 HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
PD ISO/TR 22305:2008 Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances
BS ISO 11648-2:2001 Statistical aspects of sampling from bulk materials Sampling of particulate materials
S.R. CLC/TR 50619:2014 GUIDANCE ON HOW TO CONDUCT ROUND ROBIN TESTS
BS EN ISO 15193:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
OIML V 2-200 : 2012 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
BS ISO 22514-7:2012 Statistical methods in process management. Capability and performance Capability of measurement processes
10/30233988 DC : 0 BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
DIN ISO 19730:2009-07 SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION
I.S. EN 16711-1:2015 TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION
BS EN 15991:2015 Testing of ceramic and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV)
UNI EN 15835 : 2010 FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION
14/30261900 DC : 0 BS EN 16711-2 - TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION
UNI ISO/TS 21749 : 2009 MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS
DIN ISO 5725-2:2002-12 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002)
DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS EN 15979:2011 Testing of ceramic raw and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
DIN EN 16466-2 E : 2013 VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 2: [13]C-IRMS ANALYSIS OF ACETIC ACID
05/30135474 DC : DRAFT JUNE 2005 BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION
BS EN 16466-1:2013 Vinegar. Isotopic analysis of acetic acid and water <sup>2</sup>H-NMR analysis of acetic acid
04/30118507 DC : DRAFT AUG 2004 EN 15023-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FAAS METHOD
04/30114485 DC : DRAFT JUN 2004 EN 14941 - COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD
BS ISO TR 5168:1998 Measurement of fluid flow. Evaluation of uncertainties
BS ISO 8178-2:2008 Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions
UNI EN 16204 : 2012 FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS
UNI ISO 11462-1 : 2014 GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC
DIN EN ISO 15112:2014-09 Natural gas - Energy determination (ISO 15112: 2011)
UNI EN ISO 15112 : 2014 NATURAL GAS - ENERGY DETERMINATION
ISO 19730:2008 Soil quality — Extraction of trace elements from soil using ammonium nitrate solution
BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
ISO/TR 5168:1998 Measurement of fluid flow Evaluation of uncertainties
ISO 15790:2004 Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty
UNI CEN ISO/TS 22117 : 2011 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON
ISO 19867-1:2018 Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
CSA ISO 10012-2 : 0 QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES
UNI EN ISO 14720-2 : 2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW
BIS IS 16179-1 : 2014 STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES
UNI EN ISO 14720-1 : 2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS
I.S. EN ISO 15193:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
DIN EN 14902 E : 2005 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER
DIN EN 12697-38:2004-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
DIN EN ISO 20988 E : 2007 AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY
DIN EN ISO 11979-3:2013-04 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012)
DIN EN ISO 20743:2013-12 Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013)
BS EN ISO 20743:2013 Textiles. Determination of antibacterial activity of textile products
ISO 10338:1996 Optics and optical instruments — Contact lenses — Determination of curvature
I.S. EN ISO 7235:2009 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
DIN EN 13370:2003-09 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-]
I.S. EN 10318:2005 DETERMINATION OF THICKNESS AND CHEMICAL COMPOSITION OF ZINC-AND ALUMINIUM-BASED METALLIC COATINGS - ROUTINE METHOD
I.S. EN 13040:2007 SOIL IMPROVERS AND GROWING MEDIA - SAMPLE PREPARATION FOR CHEMICAL AND PHYSICAL TESTS, DETERMINATION OF DRY MATTER CONTENT, MOISTURE CONTENT AND LABORATORY COMPACTED BULK DENSITY
I.S. EN 13656:2002 CHARACTERISATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]) AND HYDROCHLORIC (HCI) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS
I.S. EN ISO 11609:2017 DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017)
I.S. EN 14524:2004 FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION
EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
I.S. EN ISO 11979-3:2012 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012)
DIN EN ISO 7235:2010-01 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
UNI EN ISO 21570 : 2013 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS
UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
DIN EN 61620 : 1999 INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
BS 4401-6:1996 Methods of test for meat and meat products Determination of chloride content (Volhard method)
BIS IS 15393-5 : 2003(R2009) ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD
VDE 0370-16 : 1999 INSULATING LIQUIDS - DETERMINATION OF DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
S.R. CEN ISO TS 22117:2010 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON
I.S. CWA 15261-2:2005 MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING
UNI EN 15851 : 2010 Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection
BS EN ISO 15112:2014 Natural gas. Energy determination
BIS IS 16086 : 2013 INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
DIN EN 15851 E : 2010 FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION
DIN ISO 5725-1:1997-11 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 1: GENERAL PRINCIPLES AND DEFINITIONS
BS ISO/IEC TR 13233:1995 Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services
04/30114461 DC : DRAFT JUN 2004 EN 14935 - COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ETA-AAS METHOD
DIN EN 15851:2010-07 Foodstuffs - Determination of aflatoxin B<(Index)1> in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection; German version EN 15851:2010
BS ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Elements of SPC
DIN EN 16204:2012-08 FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS
PD CEN/TS 16011:2013 Plastics. Recycled plastics. Sample preparation
04/30114473 DC : DRAFT JUN 2004 EN 14937-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 2: FAAS METHOD
DIN EN 16466-1:2013-03 VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 1: [2]H-NMR ANALYSIS OF ACETIC ACID
04/30114479 DC : DRAFT JUN 2004 EN 14939 - COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD
BS EN 15851:2010 Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
BS EN 16192:2011 Characterization of waste. Analysis of eluates
BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method
DIN EN 16192:2012-02 Characterization of waste - Analysis of eluates
DIN EN ISO 15112 E : 2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
I.S. EN ISO 10012:2003 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
BS EN 15428:2007 Soil improvers and growing media. Determination of particle size distribution
05/30057945 DC : DRAFT APR 2005 BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
DIN EN 15428:2007-11 Soil improvers and growing media - Determination of particle size distribution
03/317065 DC : DRAFT NOV 2003 ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1
PD CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests
PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
BS ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results Intermediate measures of the precision of a standard measurement method
BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
BS 3156-11.0.3(1997) : 1997 AMD 10655 ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS
BS EN 16711-1:2015 Textiles. Determination of metal content Determination of metals using microwave digestion
BS ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results General principles and definitions
10/30219236 DC : DRAFT DEC 2010 BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
07/30113186 DC : 0 BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS
DIN EN 15835 E : 2010 FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN UP AND FLUORESCENCE DETECTION
08/30181799 DC : DRAFT JULY 2008 BS EN 15835 - FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEAN UP
BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BIS IS 7920-1 : 2012(R2017) STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY
04/30122896 DC : DRAFT SEP 2004 ISO 15112 - NATURAL GAS - ENERGY DETERMINATION
DIN EN 16466-3 E : 2013 VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 3: [18]O-IRMS ANALYSIS OF WATER IN WINE VINEGAR
UNE-ISO/IEC GUIA 99:2012 IN International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
DIN EN ISO 14720-1:2013-06 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013)
99/565449 DC : DRAFT OCT 99 DRAFT BS EN 13725 - AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OFFACTOMETRY
BIS IS/ISO/IEC 17025 : 2005 AMD 1 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
14/30296672 DC : 0 BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS
BS ISO 19730:2008 Soil quality. Extraction of trace elements from soil using ammonium nitrate solution
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
EN ISO 20743:2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
UNI ISO 11648-2 : 2008 STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS
UNI ISO 22514-7:2014 STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
17/30325894 DC : 0 BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES
UNI EN 15979 : 2011 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION
I.S. EN ISO 13843:2017 WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS (ISO 13843:2017)
I.S. EN 16192:2011 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
S.R. CR 10299:1999 GUIDELINES FOR THE PREPARATION OF STANDARD ROUTINE METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLOURESCENCE SPECTROMETRY
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes
UNE-EN 15835:2010 Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection
UNE-EN 16711-2:2016 Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution
ISO/TS 14167:2003 Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines
IPC TM 650-MDP : 2012 IPC TEST METHOD DEVELOPMENT PACKET
UNI CEI EN ISO/IEC 17043 : 2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
ISO 11648-2:2001 Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials
ISO/TR 22305:2006 Cigarettes Measurement of nicotine-free dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances
ISO 14707:2015 Surface chemical analysis Glow discharge optical emission spectrometry (GD-OES) Introduction to use
DIN EN 15062 E : 2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
IEC 61223-3-5:2004 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment
UNE-EN ISO 20743:2014 Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013)
UNE-EN ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
BS EN 12506:2003 Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl$u-, Co, Cr, Cr VI, Cu, Mo, Ni, NO<sub>2</sub>$u-, Pb, total S, SO<sub>4</sub><sup>2</sup>$u-, V and Zn
BS EN 14902:2005 Ambient air quality. Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
BS EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method
EN 13656 : 2002 CHARACTERIZATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]), AND HYDROCHLORIC (HCL) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS
EN ISO 15112:2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
UNI EN 14902 : 2005 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER
UNI EN ISO 7235 : 2009 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
UNI EN ISO 11979-3 : 2013 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
UNI EN ISO 15193 : 2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
UNI EN 14123 : 2008 FOODSTUFFS - DETERMINATION OF AFLATOXIN B1 AND THE SUM OF AFLATOXIN B1, B2, G1 AND G2 IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP
BIS IS/ISO/IEC GUIDE 43-1 : 1997 PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME
I.S. EN ISO/IEC 17043:2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
09/30206298 DC : 0 BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
I.S. EN 15062:2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
12/30245706 DC : 0 BS EN ISO 20743 - TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS
ISO 12787:2011 Cosmetics Analytical methods Validation criteria for analytical results using chromatographic techniques
BS EN 15835:2010 Foodstuffs. Determination of ochratoxin A in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
DIN ISO 5725-6:2002-08 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES
BS 7755-1.2:1999 Soil quality. Terminology and classification Terms and definitions relating to sampling
BS EN 16204:2012 Foodstuffs. Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS
16/30279101 DC : DRAFT MAR 2016 BS EN ISO 13843 - WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS
PREN 15979 : DRAFT 2009 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION
04/30124942 DC : DRAFT NOV 2004 BS EN 61223-2-6 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY
DD ISO/TS 21748:2004 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
DIN ISO 5725-3:2003-02 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD
06/30145474 DC : DRAFT JULY 2006 ISO 11876 - HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
DIN EN 15835:2010-05 Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column clean up and fluorescence detection
I.S. EN 16204:2012 FOODSTUFFS - DETERMINATION OF LIPOPHILIC ALGAL TOXINS (OKADAIC ACID GROUP TOXINS, YESSOTOXINS, AZASPIRACIDS, PECTENOTOXINS) IN SHELLFISH AND SHELLFISH PRODUCTS BY LC-MS/MS
BS ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values
DIN EN ISO 11876:2010-12 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
04/30123610 DC : DRAFT OCT 2004 EN 15063-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY X-RAY - FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD
09/30191982 DC : 0 BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION
07/30150572 DC : 0 ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS
DIN EN ISO 15193:2009-10 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
07/30143612 DC : 0 ISO 8586-2 - SENSORY ANALYSIS - GENERAL GUIDANCE FOR THE SELECTION, TRAINING AND MONITORING OF ASSESSORS - PART 2: EXPERT SENSORY ASSESSORS
UNE-EN ISO 15112:2014 Natural gas - Energy determination (ISO 15112:2011)
BS EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
03/109441 DC : DRAFT JUNE 2003 EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
BS EN ISO 18369-1:2017 Ophthalmic optics. Contact lenses Vocabulary, classification system and recommendations for labelling specifications
14/30283939 DC : 0 BS EN 15991 - TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV)
08/30188245 DC : DRAFT AUG 2008 BS EN 15851 - FOODSTUFFS - DETERMINATION OF AFLATOXIN B1 IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
UNI CEI 70099 : 2008 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
I.S. EN 15979:2011 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION
S.R. CEN/TS 16011:2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
ISO 10576-1:2003 Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
I.S. EN 15428:2007 SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION
I.S. EN 15835:2010 FOODSTUFFS - DETERMINATION OF OCHRATOXIN A IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION
ISO 13843:2017 Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods
PREN 15991 : DRAFT 2014 TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV)
ISO 19983:2017 Rubber — Determination of precision of test methods
I.S. EN 61223-3-5:2004 EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT
ISO/TS 21749:2005 Measurement uncertainty for metrological applications — Repeated measurements and nested experiments
S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
PREN ISO 20743 : DRAFT 2012 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS (ISO/DIS 20743:2012)
UNI EN ISO 20743 : 2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS
CR 10299 : 1998 GUIDELINES FOR THE PREPARATION OF STANDARD ROUTING METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
ISO 25337:2010 Plastics Production quality control Statistical method for using single measurements
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
IEC TR 62970:2016 Guidance on how to conduct round robin tests for household and similar electrical appliances
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
DIN EN ISO 21570 E : 2013 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS (ISO 21570:2005 + COR 1:2006 + AMD 1:2013)
DIN EN ISO 11979-3 E : 2013 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012)
ISO 21570:2005 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods
BS EN ISO 8178-2:1997 Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site
BS EN ISO 21570 : 2005 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS
ISO 14111:1997 Natural gas — Guidelines to traceability in analysis
ISO 11609:2017 Dentistry — Dentifrices — Requirements, test methods and marking
BS EN 14185-2:2006 Non fatty foods. Determination of N-methylcarbamate residues HPLC method with clean-up on a diatomaceous earth column
BS EN 14242:2004 Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis
IEC 61223-2-6:2006 Evaluation and routine testing in medical imaging departments ­ - Part 2­-6: Constancy tests ­ imaging performance of computed tomography X-ray equipment
BS EN 15062:2006 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
UNE-EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
BS EN ISO 20988:2007 Air quality. Guidelines for estimating measurement uncertainty
IEC 61620:1998 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
BS EN 13725:2003 Air quality. Determination of odour concentration by dynamic olfactometry
UNE-EN ISO 7235:2010 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
UNE-EN ISO 11979-3:2013 Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012)
ISO 7235:2003 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss
ISO 9913-2:2000 Optics and optical instruments Contact lenses Part 2: Determination of oxygen permeability and transmissibility by the coulometric method
ISO 11876:2010 Hardmetals Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders Flame atomic absorption spectrometric method
BS EN 13370:2003 Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN$u-, F$u-
ISO 15193:2009 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures
DIN EN ISO 21570:2013-08 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005 + Cor 1:2006 + Amd 1:2013)
ISO 14720-2:2013 Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
BS EN ISO 11979-3:2012 Ophthalmic implants. Intraocular lenses Mechanical properties and test methods
UNE-EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)
BS EN 13040:2007 Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS EN ISO 11609:2017 Dentistry. Dentifrices. Requirements, test methods and marking
ISO 20988:2007 Air quality Guidelines for estimating measurement uncertainty
ISO 11979-3:2012 Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods
BS EN 61223-2-6:2007 Evaluation and routine testing in medical imaging departments Constancy tests. Imaging performance of computed tomography X-ray equipment
BS EN ISO 10338:1998 Optics and optical instruments. Contact lenses. Determination of curvature
ISO 20743:2013 Textiles Determination of antibacterial activity of textile products
BS ISO 3724:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
BS EN 13657:2002 Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements
UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
DIN EN 14902:2005-10 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER
DIN EN ISO/IEC 17043:2010-05 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
EN 13725:2003/AC:2006 AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY
EN 14524:2004 FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION
EN ISO 10012:2003 Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003)
EN 14123:2007 Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup
EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods (ISO 14720-1:2013)
EN ISO 21570:2005/A1:2013 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS (ISO 21570:2005/AMD 1:2013)
EN ISO 10338 : 1997 OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE
EN 16711-2:2015 Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution
EN ISO 14720-2:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow (ISO 14720-2:2013)
EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
EN 14185-2:2006 Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column
EN ISO 14111:1999 Natural gas - Guidelines to traceability in analysis (ISO 14111:1997)
EN 15062:2006 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
EN 15428:2007 Soil improvers and growing media - Determination of particle size distribution
EN 16711-1:2015 Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion
EN 14902:2005/AC:2006 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER
EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
EN 13657:2002 Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements
EN 15851:2010 Foodstuffs - Determination of aflatoxin B1 in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection
EN ISO 9913-2 : 2000 OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - PART 2 - DETERMINATION OF OXYGEN PERMEABILITY AND TRANSMISSIBILITY BY THE COULOMETRIC METHOD
EN 16466-1:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 1: 2H-NMR analysis of acetic acid
EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
EN ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
EN ISO 20988:2007 Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007)
EN 16466-2:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 2: 13C-IRMS analysis of acetic acid
I.S. EN 13725:2003 AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY
EN 15835:2010 Foodstuffs - Determination of ochratoxin A in cereal based foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection
EN 15979:2011 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
EN 16466-3:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18O-IRMS analysis of water in wine vinegar
EN 15991:2015 Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV)
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
EN 16204:2012 Foodstuffs - Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS
DIN EN 15979:2011-04 Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC
DIN EN 16711-2:2016-02 TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION
DIN EN 16466-3:2013-03 Vinegar - Isotopic analysis of acetic acid and water - Part 3: <(hoch)18>O-IRMS analysis of water in wine vinegar
06/30142044 DC : 0 EN 15549 - AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO(A)PYRENE IN AMBIENT AIR
02/101726 DC : 0 PREN 13036-2 - ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: PROCEDURE FOR DETERMINATION OF SKID RESISTANCE OF A PAVEMENT SURFACE
DIN 53804-1:2002-04 STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS
97/402028 DC : DRAFT FEB 1997 BS ISO 11648-0 - STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIAL - PART 0: GENERAL INTRODUCTION
17/30335786 DC : 0 BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY
ISO 11459:1997 Iron ores Certified reference materials Preparation and certification for use in chemical analysis
DIN EN 16711-1 E : 2016 TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION
BS 7208-7(1998) : 1998 OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE
DIN EN 16466-1 E : 2013 VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 1: [2]H-NMR ANALYSIS OF ACETIC ACID
ISO 18369-1:2017 Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications
BS ISO 14707:2015 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
DIN EN 16711-1:2016-02 TEXTILES - DETERMINATION OF METAL CONTENT - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION
BS EN ISO 14720-1:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials Infrared measurement methods
16/30339666 DC : 0 BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING
BS EN 16711-2:2015 Textiles. Determination of metal content Determination of metals extracted by acidic artificial perspiration solution
I.S. EN 16466-3:2013 VINEGAR - ISOTOPIC ANALYSIS OF ACETIC ACID AND WATER - PART 3: [18]O-IRMS ANALYSIS OF WATER IN WINE VINEGAR
DD ISO/TS 21749:2005 Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments
BS ISO 19983:2017 Rubber. Determination of precision of test methods
CEI UNI EN ISO/IEC 17043 : 2011 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
UNE-EN 16204:2012 Foodstuffs - Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS
PD ISO GUIDE 33:2015 Reference materials. Good practice in using reference materials
CSA ISO 10012 : 2003 : R2013 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
08/30185684 DC : DRAFT JULY 2008 BS EN ISO 10360-7 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS
UNE-EN 16192:2012 Characterization of waste - Analysis of eluates
CEI EN 61620 : 1999 INSULATING LIQUIDS DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
NF EN 61620 : 1999 INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHODS
ISO Guide 33:2015 Reference materials Good practice in using reference materials
I.S. EN 16711-2:2015 TEXTILES - DETERMINATION OF METAL CONTENT - PART 2: DETERMINATION OF METALS EXTRACTED BY ACIDIC ARTIFICIAL PERSPIRATION SOLUTION
I.S. EN 15851:2010 FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] IN CEREAL BASED FOODS FOR INFANTS AND YOUNG CHILDREN - HPLC METHOD WITH IMMUNOAFFINITY COLUMN CLEANUP AND FLUORESCENCE DETECTION
ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
UNE-EN 16466-3:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18O-IRMS analysis of water in wine vinegar
UNE-EN 16711-1:2016 Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion
UNI EN 16192 : 2012 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
EN ISO 13843:2017 Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017)
ISO 15112:2011 Natural gas Energy determination
BS EN 60456:2016 Clothes washing machines for household use. Methods for measuring the performance
ISO 8178-2:2008 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
I.S. EN 15991:2015 TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV)
BS EN 13656:2002 Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO<sub>3</sub>), and hydrochloric (HCl) acid mixture for subsequent determination of elements
ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
ISO 3724:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant
BS EN 12286:1999 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures
BS EN ISO 10012:2003 Measurement management systems. Requirements for measurement processes and measuring equipment
ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs Specific requirements and guidance for proficiency testing by interlaboratory comparison
EN 61223-2-6:2007 Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment
DIN EN 14123:2008-03 FOODSTUFFS - DETERMINATION OF AFLATOXIN B[1] AND THE SUM OF AFLATOXIN B[1], B[2], G[1] AND G[2] IN HAZELNUTS, PEANUTS, PISTACHIOS, FIGS, AND PAPRIKA POWDER - HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC METHOD WITH POST-COLUMN DERIVATISATION AND IMMUNOAFFINITY COLUMN CLEANUP
CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests
EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
DIN EN 14524:2004-10 FOODSTUFFS - DETERMINATION OF OKADAIC ACID IN MUSSELS - HPLC METHOD WITH SOLID PHASE EXTRACTION CLEAN-UP, DERIVATIZATION AND FLUORIMETRIC DETECTION
EN 61223-3-5:2004 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment
CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
DIN EN ISO 20988:2007-09 AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY
EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
DIN EN 10184:2006-05 Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method
EN 16192:2011 Characterization of waste - Analysis of eluates
DIN EN 10318:2005-08 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005
EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method

ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
AS 5339:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
AS 5337:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
AS 5336:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms
AS 5335:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
AS 5006.2:2019 Silver and silver bearing alloys Determination of silver content (0.1 % to 99.9 %) - Gravimetric (fire assay) method
AS 5333.1:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room
SA/SNZ TS 61724.2:2020 Photovoltaic system performance Capacity evaluation method (IEC TS 61724-2:2016, MOD)
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
SA/SNZ TS 61724.3:2020 Photovoltaic system performance Energy evaluation method (IEC TS 61724-3:2016, MOD)
AS 3515.2:2019 Gold and gold bearing alloys Determination of gold content (30 % to 99.5 %) - Gravimetric (fire assay) method
AS 5333.2:2019 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms
AS 5332:2019 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards
ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.